Table of Contents Table of Contents Building management systems Building management systems EIT 8 Wiring installation using Instabus KNX EIT 8.1 Lighting and blind/shutter control using KNX/EIB EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX EIT 8.3 Smart homes using existing bus systems 1 2 2 3 5 7 10 Lucas Nülle GmbH Page 1/10 www.lucas-nuelle.com
Building management systems Training systems / trainers for electrical wiring/building management systems: Protective circuitry, protective measures, building mains feed, lighting and intercom systems Industrial wiring, intercoms, alarm systems, hazard alarms and access control KNX/EIB, LON Project work, technical practice, assembly practice systems, planning software Building management systems Building management systems Building management covers all aspects of advanced modern wiring installation. Nowadays, more and more things are being automated. In addition, such matters as energy saving, protection of the environment and safety of course have a key role to play as well. Building management systems of such a kind often consist of programmable bus systems which can be connected together as needed. The training course conveys basic knowledge and some small-scale applications can then be implemented. Lucas Nülle GmbH Page 2/10 www.lucas-nuelle.com
Lighting management using DALI Lighting management nowadays means more than just flexibility, energy saving and comfort. DALI stands for Digital Addressable Lighting Interface and is a protocol for digital communication between electronic lighting controls and appliances (electronic ballast units, transformers etc.). The new comprehensive system, consisting of a controller, sensor, extender and buttons, is characterised by the option of programming with or without computers or an overarching bus system. Configuration of the buscontrolled lighting system can be handled entirely by means of the display integrated into the controller with the help of a push-button rotary switch. Light management covers all areas of public life, including the following: Living room and building lighting Special effects lighting Industrial and street lighting Emergency and escape route lighting Lucas Nülle GmbH Page 3/10 www.lucas-nuelle.com
EIT 8 W iring installation using Instabus KNX EIT 8 Wiring installation using Instabus KNX The demands on electrical wiring in buildings continue to grow in step with the latest developments in technology. The modern electrician must come to terms with this development. The following topics build on conventional wiring installation and indicate a new way of assembling building management systems. In addition to the standard wiring network a bus system is required in order for the individual terminal devices to communicate. All terminal devices have intelligent software and are programmed with a PC. This is a decentralised system in which the PC is used exclusively for programming. Fundamentals of an KNX installation bus Preparation and installation of an KNX project Programming on-off functionality to demonstrate how programming of devices is accomplished Programming an intermediate (two-way) circuit Including conventional switches in an KNX project Programming centralised functionality Switching and dimming lights Control of blinds and curtains Lucas Nülle GmbH Page 4/10 www.lucas-nuelle.com
EIT 8.1 Lighting and blind/shutter control using KNX/EIB EIT 8.1 Lighting and blind/shutter control using KNX/EIB Fundamentals of an EIB installation bus Preparation and installation of an EIB project Programming on-off functionality to demonstrate how programming of devices is accomplished Programming an intermediate circuit Including conventional switches in an EIB project Programming centralised functionality Switching and dimming lights Control of blinds and curtains Basic equipment set, consisting of: Basic equipment set, consisting of: 1 EIB compact lighting and roller blind control board, basic equipment CO3209-9A 1 2 EIB room simulation with various overlay masks CO3209-9J 1 Lucas Nülle GmbH Page 5/10 www.lucas-nuelle.com
Media: 3 Interactive Lab Assistant: Basic course in building automation using KNX SO2801-3K 1 Accessories: 4 Safety measurement cable (4mm), 25cm/10", black SO5126-8B 13 5 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 1 6 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 1 7 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 2 8 2mm safety measurement cable, 3cm, black SO5126-7X 4 9 USB cable A-B LM9060 1 10 Mobile aluminium experiment stand, 3 levels, power strip with 6 sockets, 1250x700x1995mm ST7200-3A 1 11 PC holder for SybaPro experiment trolleys, height/width adjustable ST7200-5A 1 12 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1 13 Monitor holder for flat screen monitor of weight up to 10kg/22lb, VESA 75/100 ST8010-4L 1 Lucas Nülle GmbH Page 6/10 www.lucas-nuelle.com
14 Protection cover for three-level experiment trolleys ST8010-9Y 1 Software: 15 ETS 4 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX EIT 8.2 Special applications: monitoring, heating, weather, visualization, lines - and field coupling to KNX With special applications acquired during basic course knowledge is further deepened and expanded. Monitoring system Heating control Room monitoring Using the info displays Evaluation of reports KNX - Triton - button 3 - fold with display KNX - motion and presence detector KNX - button - Interface Window, door and bolt switch contacts Heating control for room temperature Heating control with frost protection setting How room temperature control reacts to disturbance variables Automatic summer/winter adaptation Presence control Weather station Detecting weather conditions via sensors Power supply to sensors Processing analogue readings using KNX/EIB Processing and display of analogue signals Lucas Nülle GmbH Page 7/10 www.lucas-nuelle.com
Wide-area coverage Extending a bus system using a single-line topology to one using wide-area topology Additional power supply for various areas and bus lines Adding extra devices Adding extra USB ports Operation and visualisation Setting up a touch panel for operation Programming a touch-panel Graphic display on a touch-panel Supplement to basic set, consisting of: Supplement to basic set, consisting of: 16 EIB monitoring system with presence monitoring and alarm contacts CO3209-9B 1 17 EIB heating control system with temp. display, disturbance feed control CO3209-9C 1 18 EIB 4-channel weather station sim., rainfall, wind, temp. and sunlight sensors CO3209-9D 1 19 EIB bus extension with line and range couplers, 4 extra bus devices CO3209-9E 1 20 EIB visualisation using touch panel, internal temp. sensor CO3209-9F 1 Accessories: Lucas Nülle GmbH Page 8/10 www.lucas-nuelle.com
21 2mm safety measurement cable, 60cm, black SO5126-7R 3 22 2mm safety measurement cable, 60cm, red SO5126-7P 3 23 2mm safety measurement cable, 30cm, red SO5126-7H 6 24 2mm safety measurement cable, 30cm, black SO5126-7K 6 25 2mm safety measurement cable, 3cm, black SO5126-7X 16 26 Safety measurement cable (4mm), 50cm, black SO5126-8L 4 27 Safety measurement cable (4mm), 50cm, brown SO5126-8N 3 28 Safety measurement cable (4mm), 50cm/20", blue SO5126-8P 3 29 Safety measurement cable (4mm), 50cm, green/yellow SO5126-8R 3 30 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II SO5126-3V 5 31 Safety connecting plug 4mm with tap (2x), green/yellow, 1000V/32A CAT II SO5126-3W 5 32 Safety connecting plug 4mm with tap (2x), brown, 1000V/32A CAT II SO5126-3S 5 33 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II SO5126-3R 1 Lucas Nülle GmbH Page 9/10 www.lucas-nuelle.com
Media: 34 Manual EIT 8, EIB/KNX building management systems SH5001-1H 1 Software: 35 ETS 4 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 EIT 8.3 Smart homes using existing bus systems EIT 8.3 Smart homes using existing bus systems This set requires a minimum installation of KNX, DALI and EnOcean components. These components can also be found in the sets EIT8 - KNX or EIT3 Energy-efficient lighting using DALI/EnOcean. Parameters for the smart home interface are set via ETS and i-bus. Supplement to basic set, consisting of: Supplement to basic set, consisting of: 36 Interface board for setting up a smart home system CO3209-9Z 1 Software: 37 ETS 4 Lite software for KNX / EIB (single licence) + dongle (D,GB,F,E) SO4001-4L 1 Lucas Nülle GmbH Page 10/10 www.lucas-nuelle.com