RT Series Reactors

Similar documents
RA Series Glasteel Reactors

Key Benefits: In-line configuration. Ease of maintenance Simple seal changeout Standard C-face motor Cartridge bearings

SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service

MSL A B A BK3 OS P AB

Hoffman Specialty Watchman Series WC & WCS Condensate Units Replacement Parts PART LISTS DN0436C

MARLOW PUMPS RECIRCULATION

Wall-mounted air heaters for outdoor installation MEC EX C

DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP

Borosilicate 3.3 Glass Pilot plants / Equipment

Thermal Devices Inc. Mount Airy, Maryland USA Process Air and Radiant. ADH Typical Installation.

1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide

TOP-LINE. TOP-LINE K13 and TL20, TL50, TL57, TL61, TL70 Series Pre-Rinse Assemblies

FLANGE-MOUNT CENTRIFUGAL PUMPS

Dean Pump High Temperature Chemical Process Inline Pumps

Horizontal Split Case Pumps Type U

Worthington D-834. vertical inline cast iron pumps

Heating Capacity - 23,700 to 220,000 Btuh Nominal Add-On Cooling - 2 to 5 Tons WATER HEATING / BOILERS CBWMV. Residential Hot Water Heat Air Handler

in/out connections outer Ø 25 bar (363 psi) 200 kg/h SS '000 (2.12 HP) 300 kg/h CU (661 lb/h) (3.18 HP) 300 kg/h SS (661 lb)

Condensate Return Feedwater Systems For Low and High Pressure Steam Boilers

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

SECTION DOMESTIC WATER HEATERS

LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.

Installation of Glass Lined Equipment

Chiller Manufacturer should have been manufacturing chillers utilizing magnetic bearing, oil free technology for more than 10 years.

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

CLOSED COUPLED CENTRIFUGAL PUMPS

Information on selection of an economizer, and resulting payback due to changes in inlet water temperature.

RAH Ka AIR COOLED WATER CHILLERS WITH SCREW COMPRESSORS AND AXIAL FANS. COOLING CAPACITY FROM 387 TO 1207 kw 1 AND 2 COOLING CIRCUITS

JE Series Cast Iron Commercial Natural Gas Steam Boiler Submittal/Specifications

GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM

Environmentally Safe No Emissions

Condensate Boiler Feed Water Make-Up

Mixing & Heat Transfer. Solutions. Biotechnology. Pharmaceutical. Food Processing. Cosmetics

HORIZONTAL AGITATOR ASSEMBLY

1 Tan Chek Zin 2 Ng Wei Sing 3 Arni R. Tharakaram. ExxonMobil, Singapore. 4 Satoshi Koguchi Hitachi Japan 1

5. CONDENSATE PUMPS/UNITS

GLOBAL FLOW PRODUCTS

Equipment Photos available.

InterSeptor Centrifugal Separators Operating & Maintenance Manual

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards

DC INVERTER MULTI-SYSTEM AIR CONDITIONER

HORIZONTAL FIRE TUBE BOILERS Piping (HVAC) Pumping Equipment (HVAC).

Removal. CAUTION: Do not let tensioner arm snap back to the freearm position, sever damage may occur to the tensioner.

Service Manual. Air Cooled Refrigeration Condensing Unit

International Reactor Bulletin 1100 Corporation. Standard and Custom Reactors for the Chemical Process Industries

Shree Laxmi Boilers.

MPA Modular Plenum Array Installation, Operation, and Maintenance Manual

Transformer oil coolers BETA & CETA

SPECIFICATIONS MODEL E859C MINI DEHYDRATOR

ZETA MAGNETIC AGITATORS

Indirect Fired Water Heater

Process Water Heater For Industrial Applications All Voltages, Single or Three Phase Up To 88 KW

Modular Hop Oast. accomplished with a fan, heater and controller. Design

4310 N. 126th Street Brookfield, WI (USA) Phone: (262) ~ Fax: (262)

ISOLATED DIRECT DRIVE PLENUM FAN (IDDP)

Inventory List for Abilene Location

Reaction Unit. Fractional Distillation Unit. Filter Unit. Synthesizer STANDARD UNITS

Vertical In-line Self-Priming liquid ring Centripetal pump TYPE - STP

Effect of Impeller Clearance and Multiple Impeller Combinations on Solid Suspension in a Standard Flat Bottom Agitated Vessel

MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE

Technical Parameter: Suction Diameter: 40~250 mm Discharge Diameter: 25~200 mm

PIPING SYSTEM EQUIPMENTS

End-Suction Centrifugal Pump

End-Suction Centrifugal Pump

Ameristar SUBMITTAL M4AH4E26B1A00AA. 2.0 Ton Multi-position Air Handler M4AH4E26B1A00AA TAG:

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

High COP. Water-Cooled Screw Chiller

Pentz EF5 Installation Guide

Heavy Duty Process Pumps API 610/ISO 13709

Rittling Fanvector. Installation, Operation and Maintenance. Cooling Fresh Air Clean Air

DC INVERTER SPLIT SYSTEM AIR CONDITIONER

Air Conditioner CONTENTS

RL/1 SERIES. One Stage Light Oil Burners FIRING RATES LIGHT OIL RL 34/1 MZ kw

Packed With Features ACCESSIBLE. Filter cartridge is automatically cleaned each time the pedal is operated.

more powerful than hand-held alternatives so they do a better job of cleaning and removing deposits.

OTHER BJM PRODUCTS SUBMERSIBLE PUMP CAPABILITIES. PERFECTA SERIES SLIDE RAILS CONTROL PANELS THE RIGHT PUMP FOR TOUGH JOBS

High Pressure Manways CODAP 2000 & PED 96/23/CE

VSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.

SpeedClean. Work Smarter NEW! Innovative cleaning products for maximum HVAC system efficiency. Innovative Maintenance Tools.

15-BER3. parts list as Excel-spreadsheet. Tsurumi Europe GmbH

Mojave. Superior Performance. Energy Efficiency. All In A Singular Dry Vacuum.

Stainless Steel Condensate Return Units

Parts for Obsolete Systems

High-Temperature Heaters

Item No. Name of Part Material of Construction 1 * 2 11 * * 65

Vent-Free Inserts. 03/01/2011 Shipping weights shown are approximate. Vent-Free Insert - 1

GOPHER Speed Controlled Rotary Cleaning for Straight Tubes

BETTER HOME COMFORT AND PEACE OF MIND STARTS WITH THE BEST SERVICE PLANS.

AIR SPRAY GUN and AIRBRUSH

SECTION AIR COOLED WATER CHILLERS (LESS THAN 150 TONS)

NOZZLE MIX COMBINATION BURNER NMC200 SERIES

Coil-In-Tank Design: Refrigeration System: Cabinet Construction:

ROWA -HP High-Pressure Centrifugal Pump

Semi-Instantaneous Indirect Fired Water Heater

HT Agitators. Reliable. Proven Performance

HASSLE FREE SUBMERSIBLE DL

CONDENSATE EXTRACTION PUMPS BHRC / RKBCV. KIRLOSKAR BROTHERS LIMITED A Kirloskar Group Company

FEATURES. Vacuum Motor. Moving Ahead With Technology

Kramersaver Air Cooled Condensing Units

DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:

Transcription:

RT-14-10 Series Reactors Data Sheet DS81-400-2 Capacity (gallons) 10 0 60 90 120 180 Working 10 Per Inch of S.S..7 ottom Head 1.6 Top Head.6 To ottom of Impeller 2.1 To Top of Impeller lades 3.2 To ottom of affle 1.8 To Face of Main Flange 10.2 5.8 300 270 240 (3) 1 1/2" Nozzles on 5 5/8" R Heating rea (square feet) 3.6 ottom Head 1.2 Per Inch of S.S..3 2.5 DTW Drive 150/FV @ 450 F 125/125 31" 4 7/8" 1/4" Gasket Face of 2" Nozzle 14" ID ID 6 1/4" Span VT 2" Fin affle 4 1/8" 10 3/4" 4 1/4" Top Head.56 Shell.43 ottom Head.37 Shell.18 ottom Head.18 Net No ccessories 358 git, affle 783 dd for Shipment 150 16.5" 73.62" 10 3/8" 7 1/2" 1000 West venue Unit of Robbins & Myers, Inc. ll rights reserved.

RT-20-20/30 Series Reactors Data Sheet DS81-400-2 45 30 0 60 90 (2) 2" Nozzles on 7" R 140 150 215 165 180 (3) Support osses on 10 1/2".C. Capacity (gallons) 20 30 Working 20 30 Per Inch of S.S. 1.4 1.4 ottom Head 4.5 4.5 Top Head 1.9 1.9 To ottom of Impeller 1.4 1.4 To Top of Impeller lades 4.1 4.1 To ottom of affle 4.9 4.9 To Face of Main Flange 23.2 31.4 10.7 13.6 300 285 270 (2) 1 1/2" Nozzles on 7" R Heating rea (square feet) 6.7 9.3 ottom Head 2.7 2.7 Per Inch of S.S..4.4 Lubricator 1.5 VMX Drive 150/FV 150/FV @ 450 F 125/125 125/125 43 1/2" 20 Top Head.59.59 Shell.43.43 ottom Head.37.37 Shell.25.25 ottom Head.25.25 5 5/8" 1/4" Gasket Face of 2" Nozzle 20" ID 24" ID 2" 4 3/4" (1 1/2" Noz) affle 279 RPM 5" (2" Noz) 10 3/16" 2 1/2" Net No ccessories 559 639 git, affle 1071 1158 dd for Shipment 150 150 18.75" 24.75" 89.1 95.1 9 1/4" Span CT 13 3/8" 7 1/2" 1000 West venue Unit of Robbins & Myers, Inc. ll rights reserved. 2/00 1M Mech No.???

RT-24-50 Series Reactors Data Sheet DS81-400C-2 30 0 45 90 (2) 1 1/ 2" Nozzles on 8 1/2" R 140 150 215 165 180 (3) Support osses on 10 1/2".C. Nozzle on 8 1/2" R Capacity (gallons) 50 Working 50 Per Inch of S.S. 2.0 ottom Head 7.8 Top Head 3.2 To ottom of Impeller 2.0 To Top of Impeller lades 7.2 To ottom of affle 6.7 To Face of Main Flange 52.4 18.4 285 270 2" Nozzle on 8 1/2" R Heating rea (square feet) 13.1 ottom Head 4.1 Per Inch of S.S..5 Lubricator 1.5 VMX Drive 150/FV @ 450 F 125/125 43 1/2" 6 1/2" 1/4" Gasket Face of 2" Nozzle 20 24" ID 28" ID 11" Span CT 7 1/2" 8 1/2" 2" 5 5/16" (1 1/2" Noz) 11" affle 279 RPM 2 3/4" 5 9/16" (2" Noz) 6 1/8" ( Noz) Top Head.58 Shell.43 ottom Head.37 Shell.25 ottom Head.25 Net No ccessories 806 git, affle 1380 dd for Shipment 150 28.75" 100" 15 7/16" 7 1/2" 1000 West venue Unit of Robbins & Myers, Inc. ll rights reserved.

RT-32-100 Series Reactors Data Sheet DS81-400D-2 0 45 60 8" 90 (4) 4" Nozzles on 11 1/4" R 150 165 180 Capacity (gallons) 100 Working 100 Per Inch of S.S. 3.5 ottom Head 18.6 Top Head 29.0 To ottom of Impeller 4.9 To Top of Impeller lades 17.2 To ottom of affle 16.0 210 (3) Support osses on 10 1/2".C. To Face of Main Flange 116.9 29.5 Heating rea (square feet) 300 285 270 22.8 ottom Head 7.3 Per Inch of S.S..7 Lubricator 1.5 VMX Drive 150/FV @ 450 F 125/125 43 1/2" Top Head.56 22 1/2 Shell.63 ottom Head.56 Shell.37 ottom Head.37 14" 9 5/8" 11 1/4" 3/8" Gasket 13 1/2" 11 1/2" Net No ccessories 1732 git, affle 2510 dd for Shipment 150 32" ID Vessel 36" ID Jkt 279 RPM affle 36.25" 115.625" 3 1/2" Face of Nozzle 8 3/4" 3 3/4" Span CT 1000 West venue Unit of Robbins & Myers, Inc. ll rights reserved.

RT-40-200 Series Reactors Data Sheet DS81-400E-2 0 72 1/2 67 1/2 12" x 16" 90 96 4 3/8" 120 6" Nozzle on 1 R 180 Capacity (gallons) 200 Working 200 Per Inch of S.S. 5.4 ottom Head 36.3 Top Head 56.7 To ottom of Impeller 10.4 To Top of Impeller lades 33.6 To ottom of affle 39.0 To Face of Main Flange 229.3 45.4 310 287 1/2 270 240 247 1/2 205 (4) Support osses on 15".C. (4) 4" Nozzles on R Heating rea (square feet) 37.8 ottom Head 11.6 Per Inch of S.S..9 100/FV @ 450 F 100/100 38 5/8" 22 1/2 3525 SRW Drive Top Head.56 Shell.63 ottom Head.56 Shell.37 ottom Head.37 17 1/8" 3/8" Gasket 12 11/16" 1 (6" Noz) (4" Noz) 15 5/8" 16 5/8" (4" Noz) (6" Noz) 11" Net No ccessories 2741 git, affle 3993 dd for Shipment 150 40" ID Vessel 44" ID Jkt affle 30" 45.5" 123.125" 117 RPM 18 1/4" Span CT 3 1/2" Face of Nozzle 4 3/4" 8 3/4" 18 1/2" 1000 West venue Unit of Robbins & Myers, Inc. ll rights reserved.

RT-48-300/500 Series Reactors Data Sheet DS81-400F-2 0 67 1/2 90 60 45 42 4 3/8" 12" x 16" 135 153 180 8" Nozzle on 16" R Capacity (gallons) 300 500 Working 300 500 Per Inch of S.S. 7.8 7.8 ottom Head 62.7 62.7 Top Head 92.0 92.0 To ottom of Impeller 27.1 27.1 To Top of Impeller lades 65.6 65.6 To ottom of affle 27.1 27.1 To Face of Main Flange 355.3 574.6 54.9 81.0 38 5/8" 20" 15 3/4" 16" 16 3/4" 18 7/16" (8" Noz) (4" Noz) (8" Noz) 3/8" Gasket 315 23 300 270 18 1/2" (4" Noz) 48" ID Vessel 52" ID Jkt 247 1/2 225 (4) Support osses on 15".C. (4) 4" Nozzles on 18 1/2".C. 3525 SRW Drive affle 11 1/2" Heating rea (square feet) 50.3 79.6 ottom Head 16.9 16.9 Per Inch of S.S. 1.1 1.1 100/FV 100/FV @ 450 F 100/100 100/100 Top Head.56.56 Shell.63.63 ottom Head.56.56 Shell.37.37 ottom Head.56.56 Net No ccessories 3740 4970 git, affle 5070 6420 dd for Shipment 150 150 49.38" 77.38" 129.88" 157.88" 3 1/2" Face of Nozzle 6" 2 Span CT 8 3/4" 2 23 1/2" 1000 West venue Unit of Robbins & Myers, Inc. ll rights reserved.