CLIMASTER ZCF AIR HANDLING UNITS

CLIMASTER ZCF AIR HANDLING UNITS From 1 September 2013, EXHAUSTO has taken over Novenco s activities within sales and production of land-based climate control systems. Inquiries relating to the products described below should therefore be directed to EXHAUSTO. Building & Industry www.ehausto.com

Novenco Air Handling Units Climaster ZCF May 2007

Towards a better indoor climate fresh air and comfort The indoor climate in offices, schools and other institutions varies greatly depending on the condition of the buildings, their layout and furnishing, and the number of people using them. Quite often it can be seen that spaces were designed in accordance with some original plan that has become outdated. The usage of the spaces has simply changed. This is for eample epressed by temporary solutions that are made permanent in spite of poor room comfort. The ideal ventilation unit for solving indoor climate problems Climaster ZCF can be delivered with integrated controls for LONWORKS communication as well as a user-friendly control panel. The display shows the active system state and is also used for configuration. The controls are factory tested. All components are easy and quick to install on site. Alternatively, the Climaster ZCF can also be delivered without controls. The fan section is energy efficient and designed with operational reliability and ease of maintenance in mind. The fan wheel has free-flow, backward-curved blades and is connected directly to a motor with integrated frequency converter. ZCF units are available in eight sizes, ranging from 0.10 m 3 /s to 3.70 m 3 /s, all with rotary heat echanger. Climaster ZCF 5, 8, 11 and 15 are also available with cross-flow heat echanger. Both types provide optimum heat recovery and come, as standard, with fresh-air-intake spring-return damper and F7 and F5 pocket filters. Built into the delivery-air section is a hot-water or electric heating coil on the Climaster ZCF 20, 25, 30 and 37 the heating coil is placed outside on the unit housing. As an option a cooling coil for mounting in the delivery-air duct is also available. Novenco provides technical guidance and a 2-year manufacturer s warranty on Climaster ZCF. 2 Climaster ZCF

Contents A look inside Climaster ZCF 4 Controls with or without 9 Remote configuration (optional) 10 Capacities and variants 11 Capacity diagrams noise and SEC 12 Service and warranty 14 Structural diagrams 15 Dimensions and weights 18 Technical specifications 20 Climaster ZCF meets all ventilation requirements. Important This document is provided As is and is subject to change without notice. Novenco reserves this right due to continuous product development. Copyright (c) 2002 2007, Novenco. All rights reserved. Trademarks Novenco is a trademark of Novenco A/S. Other trademarks appearing in this document are the property of their respective owners. MU 13945 0507 Climaster ZCF 3

A look inside Climaster ZCF The complete ventilation system with built-in advantages Fan wheel and motor with integrated frequency converter Delivered air 6 5 Choose between hot-water and electric heating coils. Etract 2 Illustration of Climaster ZCF 37 with rotary heat echanger and control unit. Doors are removed. F5 pocket filter is standard for etracted air filter monitor is connected. 4 Climaster ZCF

Electronically controlled rotary heat echanger with belt drive and premounted spare belt. Alternatively, a hygroscopic rotary heat echanger is also available. Spring-return fresh-air damper closes in the event of frost On/Off damper for ehaust air is standard. 3 2 1 Fresh air F7 pocket filter is standard for fresh air filter monitor is connected. 4 5 Ehaust 7 Fan wheel and motor with integrated frequency converter Alternatively, ZCF 5, 8, 11 and 15 are available with cross-flow heat echanger. Optional: Control unit with all working data, easy to access for technicians Climaster ZCF 5

1 3 Shut-off damper for fresh-air inlet The shut-off damper has a spring-return motor, and is regulated by a signal from the control unit. The figure shows a round damper used on ZCF 5, 8 and 11. These are supplied as loose parts for fitting to the fresh-air connector. Dampers for ZCF 15, 20, 25, 30 and 37 are rectangular, and are pre-fitted to the fresh-air connector. A shut-off damper with on/off damper motor for the discharged air is delivered as standard. Heat echanger rotary The rotor is made of high-quality chequered aluminium plate with good heat transfer, which gives a high efficiency. The rotor is driven by a geared motor with electronic speed regulation. A spare belt is fitted on the rotor as standard. Alternatively, a hygroscopic rotary heat echanger is also available. 2 4 Fresh air Filters for fresh and etracted air Fresh-air filter F7 is standard. Etracted-air filter F5 is standard. The filters are pocket filters, which must be replaced when needed. A signal indicating filter change is displayed in the control panel. The filters are disposable. Sets of spare filters are available as accessories to order. Heat echanger cross flow (ZCF 5, 8, 11 and 15) The cross-flow heat echanger is made of aluminium plate with good heat transfer, which gives a high efficiency. The section can by-pass air flow round the echanger. The cross-flow echanger and by-pass have two regulating dampers connected to a damper motor for modulating operation. The echanger has an aluminium drip tray and condensate drain beneath it. A water trap is included. 6 Climaster ZCF

5 6 Delivered air Fan delivery fan etraction fan The fan unit is designed for comfortable ventilation and makes little noise. It is installed on anti-vibration mountings and is easily dismantled for maintenance and service. The fan wheel is of the free-flow type and has backward-curved blades. It is connected directly to the motor shaft. The standard motor has an integrated frequency converter and stepless speed control. 6 7 Delivered air Electric heating coil (alternative) The heating coil consists of stainless steel heating element groups. On ZCF 5, 8, 11 and 15, the coil is located within the delivery-air section. On ZCF 20, 25, 30 and 37, it is mounted outside on the deliveryair connector. The heating coil is step regulated, with the first step being modulating. Hot-water heating coil On ZCF 20, 25, 30 and 37, the heating coil is mounted on the outside of the delivery-air connector. See figure above. On ZCF 5, 8, 11 and 15 it is built-in in the delivery-air section and water is supplied via a connector on the end of the unit. The heating coils are made of copper piping with aluminium fins. Connection cables run from the control unit to the motorised valve. Specific heating coil dimensions are calculated using the Climaster Designer program from Novenco. Control unit (optional) The control unit is located in the section containing the discharge fan. It is easily accessible for inspection and service. All signals from internal and eternal functions are recorded in the unit. Selected parameters are viewed and set with the control panel. Connecting to LONWORKS is done via the control unit. Climaster ZCF 7

Eternal cooling system (optional) The cooling system is offered for the entire ZCF series. It includes a cooling coil with duct adapter, cooling unit and a motorised three-way valve. The cooling coil is installed in the delivery-air duct. To allow condensation run-off, it must be installed vertically. The cooling unit connects to the control unit and via piping to the cooling coil. See the water circulation circuit below. Vertical air delivery (ZCF 20, 25, 30 and 37) Variants with this type of air delivery are only available with rotary heat echangers and have vertical delivery-air ducts located in the top of the unit casing. The heating coil is mounted horizontally on the delivery-air connector. If the system also is to be fitted with cooling functionality, the cooling coil must be mounted vertically. V T VM T Return Min. 60 kpa diff. pressure VO Supply V T V = Shut-off valve VM = Solenoid valve VO = Overflow valve T = Thermometer Etra pump activated by low diff. pressure The circuit has to be made by an authorised plumber. The pump and overflow valve are supplied by a third party for eample the plumber. The Climaster Designer program from Novenco is used for calculation of the cooling capacities and units matching the specific needs. Eternal LONWORKS web-module (optional) The module connects with the control unit, uses LONWORKS technology and allows remote configuration and monitoring of Climaster ZCF. A single module can be connected to other types of units and used to monitor their operation. See more details on page 10. 8 Climaster ZCF

Controls with or without Novenco Climaster ZCF can be delivered with controls completely integrated with the fan unit, and which only have to be connected to electricity and hot water for the heating coil. If cooling is also selected, the cooling unit and coil must be installed and connected to each other and to the ZCF controls as well. The ZCF controls are ready for LONWORKS communication and can be set as required. Many optional functions can be selected. Operating parameters ZCF controls are factory set with standard setpoints suited for comfort ventilation. The final operating settings are set in accordance with customer wishes. Control panel Display Date and time Temperature Operating mode Alarm signal User settings Temperature Air quantity Etended timer operation Technician settings User options Display of settings Timer settings for altered operation times Adjustment of daily operation Panel for etended operation Signal display Operating signal Alarm signal User settings Etended timer operation Forced air quantity time setting Climaster ZCF 9

Remote configuration (optional) Configuration E-mail Log-in Future possibilities today The combined net server and data logger module makes it possible to remotely configure, operate and monitor the Climaster ZCF. The module is optional, connects directly to the ZCF controls and uses LONWORKS technology. It is available for the entire range of ZCF units. The connection of the ZCF unit to a LONWORKS network makes it possible to read logged data, handle alarms, view and change settings, receive status messages and more from all units connected to the module. This can be done via local networks, the Internet, GSM/GPRS and Point-to-Point modem connections. The issued alarms and messages can be received as e-mail and as SMS. It is for eample possible to log into the Climaster ZCF from a laptop computer using a mobile phone with data subscription. Historical data, i.e. alarms and trends, from all units connected to the module can then be read and the units can be operated and configured. Security Eternal LONWORKS web-module A single web server and data logger module can connect several ZCF units. Data logging, operation and monitoring of the connected units is then handled by the same module. Versatile settings As a security measure, the data traffic between Climaster ZCF and the client can be encrypted using the SSL, MD5 or HTTPS protocols. Summary of options Remote configuration and setting of temperature setpoints operating mode Monitoring of for eample status temperatures Alarm reception via e-mail via SMS Data logging 10 Climaster ZCF

Capacities and variants Capacities ZCF 5 ZCF 37 ZCF 30 ZCF 25 ZCF 20 ZCF 15 ZCF 11 ZCF 8 0.1 0.5 1 2 3 4 5 Air flow rate, qv [m 3 /s] Variants ZCF ()-9E-L1 with cross-flow heat echanger and air delivery on upper left-hand side ZCF ()-9E-R1 with cross-flow heat echanger and air delivery on upper right-hand side ZCF (y)-10e-l1 with rotary heat echanger and air delivery on upper left-hand side ZCF (z)-10e-l3 with rotary heat echanger and vertical air delivery on top lefthand side ZCF (y)-10e-r1 with rotary heat echanger and air delivery on upper right-hand side ZCF (z)-10e-r3 with rotary heat echanger and vertical air delivery on top right-hand side ZCF (y)-10c-l1 with rotary heat echanger and air delivery on lower lefthand side ZCF (y)-10c-r1 with rotary heat echanger and air delivery on lower right-hand side = ZCF size (5, 8, 11 or 15) ; y = ZCF size (5, 8, 11, 15, 20, 25, 30 or 37) ; z = ZCF size (20, 25, 30 or 37) Models with hot-water heating coils are designated by a V - e.g. ZCF ()-9E-L1V Models with electric heating coils are designated by an E - e.g. ZCF ()-9E-L1E Climaster ZCF 11

Capacity diagrams noise and SEC The following pages show the capacities of Climaster ZCF units fitted with rotary heat echangers. Climaster ZCF 5, 8, 11 and 15 are also available with cross-flow heat echangers. The capacity diagrams of these units are comparable to units with rotary heat echangers. Specific capacity curves are shown in the technical specifications in the Climaster Designer program. Capacity diagrams show the quantity of air and the pressure available for the duct system. Noise curves (solid lines) show the actual noise level for specific combinations. SEC curves (dashed lines) show the amount of energy in J/m³ (kw/m³/s) required to transport the specific quantity of air. (SEC = specific electricity consumption) ZCF 5 ZCF 8 ps [Pa] ps [Pa] 600 80 600 80 500 85 500 400 75 3.20 75 400 85 3.20 300 70 300 70 200 2.50 1.50 2.00 0 0.00 0.15 0.30 0.45 qv [m 3 /s] 200 0 0.00 0.25 0.50 2.50 1.50 2.00 0.75 qv [m 3 /s] ZCF 11 ZCF 15 ps [Pa] 85 90 90 ps [Pa] 85 600 80 700 500 3.20 600 80 3.20 75 500 400 400 75 300 70 2.50 2.50 300 70 200 200 2.00 2.00 1.50 0 1.50 0 0.00 0.25 0.50 0.75 1.00 qv [m 3 /s] 0.00 0.50 1.00 1.50 qv [m 3 /s] Noise curve SEC curve 12 Climaster ZCF

ZCF 20 ZCF 25 ps [Pa] ps [Pa] 800 3.20 700 85 700 85 90 600 600 80 80 2.50 500 500 400 400 75 2.00 75 300 300 200 70 1.50 200 70 0 0 0.00 0.50 1.00 1.50 2.00 qv [m 3 /s] 0.00 0.50 1.00 1.50 2.00 90 3.20 2.50 2.00 1.50 2.50 qv [m 3 /s] ZCF 30 ZCF 37 ps [Pa] ps [Pa] 3.20 85 700 85 700 600 600 80 2.50 80 500 500 400 400 2.00 75 75 300 300 90 3.20 2.50 2.00 200 70 1.50 200 70 1.50 0 0.00 0.50 1.00 1.50 2.00 2.50 3.00 qv [m 3 /s] 0 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 qv [m 3 /s] Climaster ZCF 13

Service and warranty Service & technical support Novenco provides technical guidance on installation, testing of functions and training of operating personnel. Contact the Novenco service department on e- mail service@novenco-group.com. Warranty Novenco gives a two-year basic warranty from the time of delivery. The warranty covers material and manufacturing defects on the ventilation unit and the controls. Wear parts are not covered by the warranty. 14 Climaster ZCF

Structural diagrams Standard Etra Component Description BT1 Fire thermostat BT70 Fire thermostat for delivered air, ma. 70 C, located inside the unit BT2 Fire thermostat BT40 Fire thermostat for etracted air, ma. 40 C, located inside unit CAV Constant air flow Constant pressure control using internal pressure transducer FP1 Monitor for fresh-air filter Monitors pressure drop across the filter and indicates when filter replacement is required FP2 Monitor for etracted-air filter Monitors pressure drop across the filter and indicates when filter replacement is required M1 Delivery fan B-wheel fan and motor with frequency converter M2 Fan for discharged air B-wheel fan and motor with frequency converter MV3 Motorised valve heating Motorised three-way valve modulating MV4 Motorised valve cooling Motorised two-way valve modulating OHT Overheating thermostat Safety thermostat in case of overheating RV Rotor monitor Monitors rotor speed and interval eercising RVS Rotor control system Variable rotor speed SA SF Motorised on/off damper for discharged air Motorised spring-return damper for fresh-air inlet Located in discharged-air duct; closes in stand-by mode Fitted in fresh-air inlet closes on system shut-down SM3 Motorised bypass damper Modulating motor on connected dampers T1 Temperature sensor for fresh air Located in fresh-air section behind filter T2 T3 T4 T5 Temperature sensor for delivered air Temperature sensor for etracted air Temperature sensor for return water Temperature sensor for discharged air Installed in delivered air connector and set for min. temperature of delivered air Located in etracted-air connector for measurement and regulation of room temperature Located on return pipe from heating coils to ensure frost protection Located behind cross-flow heat echanger for control of icing protection VAV Eternal pressure transducer Constant static pressure in duct Climaster ZCF 15

Climaster ZCF with rotary heat echanger, hot-water heating coil, and cooling H1 VAV1 Fresh air Delivered air Climaster ZCF Rotor MV4 Eternal ZCF 20-37 CO 2 H2 VAV2 Ehaust Etract Climaster ZCF with cross-flow heat echanger, hot-water heating coil, and cooling Ehaust H1 VAV1 Delivered air MV4 Climaster ZCF Eternal ZCF 20-37 Fresh air CO 2 H2 VAV2 Etract 16 Climaster ZCF

Climaster ZCF with rotary heat echanger, electric heating coil, and cooling H1 VAV1 Fresh air Delivered air Climaster ZCF Rotor MV4 Eternal ZCF 20-37 CO 2 H2 VAV2 Ehaust Etract Climaster ZCF with cross-flow heat echanger, electric heating coil, and cooling Ehaust H1 VAV1 Delivered air MV4 Climaster ZCF Eternal ZCF 20-37 Fresh air CO 2 H2 VAV2 Etract Climaster ZCF 17

Dimensions and weights ZCF () var. 9E-L1 ZCF () var. 9E-R1 LT RT LT RT L k L 9 L k L 9 ZCF (y) var. 10E-L1 ZCF (z) var. 10E-L3 ZCF (y) var. 10E-R1 ZCF (z) var. 10E-R3 L v L v LT RB LT RB LB RT LB RT L r L 10 L r L 10 L r L 10 L r L 10 ZCF (y) var. 10C-L1 ZCF (y) var. 10C-R1 LB RT LT RB L r L 10 L r L 10 L 9 [mm] L 10 [mm] 1 1. The lengths of ZCF 20-37 are given without and but also including eternal water heating coils, respectively. 2. ZCF 20, 25, 30 and 37 have eternally fitted heating coils, which are included in the ma. weight. = ZCF size (5, 8, 11, or 15); y = ZCF size (5, 8, 11, 15, 20, 25, 30 or 37) ; z = ZCF size (20, 25, 30 or 37) [mm] L k [mm] L r [mm] L v [mm] Ma. weight [kg] 2 ZCF 5 1985 1620 Not sectional Not sectional Not sectional 287 ZCF 8 2050 1740 Not sectional Not sectional Not sectional 370 ZCF 11 2355 1880 708 940 465 490 ZCF 15 2670 2140 795 1080 550 620 ZCF 20 2485 / 2705 889 706 1642 872 ZCF 25 2485 / 2705 889 706 1642 900 ZCF 30 2685 / 2905 894 897 1842 1180 ZCF 37 2685 / 2905 894 897 1842 1290 18 Climaster ZCF

ZCF 5, 8 and 11 9E-R1 10C-R1 9E-L1 10C-L1 y y y y z y z y y z y z H d d H c d d d c d H c d d c H F B F B F B F B ZCF 15, 20, 25, 30 and 37 9E-R1/10E-R1 10C-R1 9E-L1/10E-L1 10C-L1 10E-R3 10E-L3 H h Cooling system B H F y z b b h d c ZCF 5 770 975 560 260 280 238 Ø315 388 ZCF 8 940 1125 730 289 345 293 Ø400 488 ZCF 11 1080 1380 870 365 390 325 Ø500 654 ZCF 15 1 h c y z F B b H h h c y z 1220 1450 1010 165 297 245 800 400 588 ZCF 20 1677 1770 1465 110 336 172 1150 1150 700 670 ZCF 25 1677 1770 1465 110 336 172 1150 1150 700 670 ZCF 30 1937 2148 1725 341 209 1250 1500 900 870 ZCF 37 1937 2148 1725 341 209 1250 1500 900 870 1. Vertical air delivery is not available on Climaster ZCF 15. F B b b F B y z c h h H Weight [kg] of cooling unit type YORK YCSA TP according to cooling efficiency [kw] per unit 1 8 12 18 26 36 50 60 Cooling unit, empty 130 185 220 390 400 624 706 Cooling agent 2 2 3.7 4 11.4 18 22 Weight [kg] of standard cooling coils according to size [mm] 450450 580550 680650 0600 1250800 14500 Cooling coil 23 31 39 48 79 120 1. The capacities and thereby the sizes of the cooling units are calculated using the Climaster Designer program from Novenco. b F B y z c h h H 50 170 H h 241 y b' F B b b' b F B 241 y h H 50 170 Climaster ZCF 19

Technical specifications Unit data ZCF 5 ZCF 8 ZCF 11 ZCF 15 Ma. air quantities m 3 /s 0.55 0.85 1.15 1.65 Damper for fresh-air inlet Shut-off damper for discharged air Pocket filter (F7) for fresh-air inlet mm Motorised, spring-return Motorised, on/off 592389300 795439380 592592470 287592470 592389300 795439300 592592300 287592300 with bypass duct with electronic controls 592592470 490592470 592592300 490592300 Pocket filter (F5) for etracted air mm Cross-flow heat echanger Rotary heat echanger Plate type and insulation 0.9 mm alu-zinc AZ185- C4 50 mm mineral wool 70 kg/m 3 Duct connections mm Ø315 Ø400 Ø500 800400 Min. space in front of unit for service mm 1050 1050 1 1250 Fan data ZCF 5 ZCF 8 ZCF 11 ZCF 15 Type free flow with B-wheel Min. RPM 684 1042 944 694 Ma. RPM 4700 3850 3450 2650 Motors (specifications per motor) ZCF 5 ZCF 8 ZCF 11 ZCF 15 Standard motors speed adjustable with integrated frequency converter Size kw 0.75 1.1 1.5 2.2 Current at 3 400 V A 1.7 2.4 3.3 4.3 Current at 3 230 V (alternative) A 2.9 4.2 5.7 7.5 Ma. power input kw 1.03 1.5 1.9 2.7 Fuse group (3 230 V / 3 400 V, 50 Hz) A 310 310 316 316 Hot-water heating coils ZCF 5 ZCF 8 ZCF 11 ZCF 15 Pipe connection size G½" G½" G½" G3/4" Motorised valve, three-way modulating, ma. kvs 4 4 4 4 Valve connection size G1" G1" G1" G1" Design temperature 1 C 0 to +20 (inlet/outlet water temp. 60 / 40) Electric heating coils (alternative) ZCF 5 ZCF 8 ZCF 11 ZCF 15 Ma. output built-in kw 8 12 20 28 Step control kw 1+1+2+4 1.5+1.5+3+6 2.5+2.5+5+10 3.5+3.5+7+14 Fuse group Independent fuse group for electric heating coils Cooling (optional) ZCF 5 ZCF 8 ZCF 11 ZCF 15 Pipe connection size 3/4 3/4 1 5/4 Motorised valve, three-way modulating ma. kvs 4 6.3 6.3 10 Valve connection size G1" G1" G1" G1" Cooling coil surface area 2 mm 450450 580550 680650 0600 Cooling C 27 to 16 (inlet/outlet water temp. 7 / 12) Cooling units, type YORK YSCA, cooling effect kw 8 to 61 Other options ZCF 5 ZCF 8 ZCF 11 ZCF 15 Fleible connectors mm ø315 ø400 ø500 800400 1. To which must be added the heat recovery from the heat echanger. 2. The cooling coil is delivered including a duct adapter piece for fitting between the ZCF unit and the cooling coil. 20 Climaster ZCF

Unit data ZCF 20 ZCF 25 ZCF 30 ZCF 37 Ma. air quantities m 3 /s 2.0 2.5 3.0 3.7 Damper for fresh-air inlet Shut-off damper for discharged air Pocket filter (F7) for fresh-air inlet mm 592490635 592287635 592490305 592287305 Motorised, spring-return 592490635 592287635 592490305 592287305 Motorised, on/off 592287635 592592635 592287305 592592305 592287635 592592635 592287305 592592305 Pocket filter (F5) for etracted air mm Rotary heat echanger with electronic controls Plate type and insulation 0.9 mm alu-zinc AZ185- C4 50 mm mineral wool 70 kg/m 3 Duct connections mm 1150700 1150700 1250900 1250900 Vertical delivery-air ducts (alternative) mm 1150700 1150700 1500700 1500700 Min. space in front of unit for service mm 1700 1700 1950 1950 Fan data ZCF 20 ZCF 25 ZCF 30 ZCF 37 Type free flow with B-wheel Min. RPM 542 495 415 387 Ma. RPM 2970 2675 2310 2060 Motors (specifications per motor) ZCF 20 ZCF 25 ZCF 30 ZCF 37 Standard motors speed adjustable with integrated frequency converter Size kw 3 4 4 5.5 Current at 3 400 V A 7 8 8 12 Current at 3 230 V (alternative) A 12 14 14 21 Ma. power input kw 4.2 5.5 5.5 7.5 Fuse group for 3 400 V, 50 Hz A 3 20 3 25 3 25 3 32 Fuse group for 3 230 V, 50 Hz A 3 32 3 32 3 32 3 50 Hot-water heating coils ZCF 20 ZCF 25 ZCF 30 ZCF 37 Pipe connection size 1 1 1½ 1½ Motorised valve, three-way modulating, ma. kvs 10 10 10 10 Valve connection size 1¼ 1¼ 1¼ 1¼ Design temperature 1 C 18 to +20 (inlet/outlet water temp. 60 / 30) Electric heating coils (alternative) ZCF 20 ZCF 25 ZCF 30 ZCF 37 Ma. output built-in kw According to specifications Step control kw According to specifications Fuse group According to specifications Cooling (optional) ZCF 20 ZCF 25 ZCF 30 ZCF 37 Pipe connection size 1½ 1½ 2 2 Motorised valve, three-way modulating, ma. kvs 16 16 16 16 Valve connection size 1¼ 1¼ 1¼ 1¼ Cooling coil surface area 2 mm 1250800 1250800 14500 14500 Cooling C 27 to 16 (inlet/outlet water temp. 7 / 12) Cooling units, type YORK YSCA, cooling effect kw 8 to 61 Other options ZCF 20 ZCF 25 ZCF 30 ZCF 37 Fleible connectors mm 1150 700 1150 700 1250 900 1250 900 Fleible connectors for vertical air delivery mm 1150 700 1150 700 1500 700 1500 700 Climaster ZCF 21

Building & Industry The strongest product range on the market! EXHAUSTO has taken over Novenco s activities within sales and production of land-based climate control systems. Two strong brands, with high-quality product ranges and the most knowledgeable employees in the industry - the best basis for optimum solutions! Read more about the products and solutions on www.ehausto.com www.ehausto.com EXHAUSTO A/S Odensevej 76 DK-5550 Langeskov Tel. +45 65 66 12 34 Fa +45 65 66 11 10 salgdk@ehausto.dk www.ehausto.dk