DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM 5/ GOULDS NPE 40 60 ft.5 GOULDS NPE 240 5/ 240 3500 40 60 ft.5 3500 MATERIALS OF CONSTRUCTION: PUMP: TYPE: CASING: IMPELLER: PUMP SHAFT: SHAFT SEAL: VERTICAL MULTI-STAGE DIFFUSER STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL CARBON GRAPHITE STANDARD EQUIPMENT FEATURES Duplex Condensate Tank 24 x20 x 20 42 Gallon GOULDS NPE Stainless Steel Pumps ELECTRICAL Square D float switch SALES & SERVICE BY: US PUMP CORP
US PUMP CORP DUPLEX CONDENSATE SYSTEM Featuring - NPE stainless steel pumps with high effecient motors - Stainless Steel fittings - Glass sight with brass valves - Mechanical Float Switch - Steel tank - 42 and 5 gallons - -/2 Vent - Steam inlet made to specifications ***Model System Shown. Actual system may differ.***
CONDENSATE DUPLEX - 42 Gallons w/ " connection -/2" FEMALE THREAD 36 pump to pump 24 SQUARE D FLOAT SWITCH OPEN ON RISE WATER LEVEL SIGHT GLASS 20 20 ***Inlet connection and float switch side may vary*** Telephone: 56-303-7799
Submittal Data Maximum Flow 43 US g.p.m. Submittal Prepared for: Engineer: Submittal Prepared by: Submittal Date: /2/205 Flow at Duty Point 40 US g.p.m. Hydraulic Data Maximum TDH TDH at Duty Point NPSHR NPE Stainless Steel End Suction Stainless Steel Pumps MODEL : STF4D4 Motor Data Voltage / Phase / Enclosure NPE Model 95 ft 60 ft 0 ft 230V PH TEFC STF4D4 Job: Contractor: Company: Approved by: Date: Qty. Engineering Data Pump Code: STF4D4 Pump Size: x /4-6 Pump Max Horsepower:.302 hp Pump Horsepower at Rating Point:. hp Pump Shut Off Head: 95 ft Motor Speed: 3500 rpm Max. Temperature: 22 F Liquid: Water Motor Code: E0782S System Input Power: ~ 230 V Motor Rated Horsepower:.50 hp Max. Frequency: 60 Electrical Enclosures: TEFC Motor Standard: NEMA Suction Flange Standard:NPT Suction Flange Rating: 25 PSI Suction Size: /4" Discharge Flange Standard:NPT Discharge Flange Rating:25 PSI Discharge: " Approximate Net Weight: 40 lb Impeller Size: 4 3 /4" Impeller Construction: Closed Impeller Type: Radial impeller Impeller Material: AISI 36L Stainless Steel Sense of Rotation: Clockwise from the drive end Shaft Seal: Carbon/Sil-Carbide/Viton Standard Equipment / Capability: High Efficiency Impeller: Enclosed impeller with unique floating seal ring design maintains maximum efficiencies over the life of the pump without adjustment. Mechanical Seal: Standard John Crane Type 2 with carbon versus silicon-carbide faces, Viton elastomers, and 36 stainless metal parts. Optional high temperature and chemical duty seals available. Motors: NEMA standard open drip-proof, totally enclosed fan cooled or explosion proof enclosures. Rugged ball bearing design for continuous duty under all operating conditions. Superior Materials of Construction: Complete AISI 36L stainless steel liquid handling components and mounting bracket for corrosion resistance, quality appearance, and improved strength and ductility. Casing and Adapter Features: Stainless steel construction with NPT threaded, centerline connections, easily accessible vent, prime and drain connections with stainless steel plugs. Optional seal face vent/flush available. Printed from data file /2/205
Performance Data Maximum Flow Fluid: Water [ft] Head 70 60 50 40 30 20 0 00 90 80 70 60 50 40 30 20 0 0 [ft] 2 0 8 6 4 2 0 [hp] 43 US g.p.m. Submittal Prepared for: Engineer: Submittal Prepared by: Submittal Date: /2/205 2.0.6.2 0.8 0.4 Ø 6 /8 Ø 4 3/4 Ø 4 /6 NPSH-values Shaft power P2 Flow at Duty Point 40 US g.p.m. Hydraulic Data Maximum TDH TDH at Duty Point NPSHR Duty Chart: 3500 RPM 49.6% Application range 45% NPE Stainless Steel End Suction Stainless Steel Pumps MODEL : STF4D4 5.2% 48% 52% 50% 52.2% Ø 4 /6 Ø 4 /6 (P2) Voltage / Phase / Enclosure 52% 52.% Motor Data 5% Eff. 5.2% 38.8 US g.p.m. Ø 4 3/4 Ø 4 3/4 (P2) 48% Ø 6 /8 Ø 6 /8 (P2) 56.4 ft 9.93 ft. hp 0 4 8 2 6 20 24 28 32 36 40 44 48 52 [US g.p.m.] NPE Model 95 ft 60 ft 0 ft 230V PH TEFC STF4D4 Job: Contractor: Company: Approved by: Date: Qty. Printed from data file /2/205
Unit Dimensions Maximum Flow 43 US g.p.m. Submittal Prepared for: Engineer: Submittal Prepared by: Submittal Date: /2/205 Flow at Duty Point 40 US g.p.m. Hydraulic Data Maximum TDH TDH at Duty Point NPSHR NPE Stainless Steel End Suction Stainless Steel Pumps MODEL : STF4D4 Motor Data Voltage / Phase / Enclosure NPE Model 95 ft 60 ft 0 ft 230V PH TEFC STF4D4 Job: Contractor: Company: Approved by: Date: Qty. Dimension Value Dimension Value C 7 /8 Cmax 5 /6 Discharge " NPT L 4 9 /6 M 7 5 /6 Suction.25" NPT W 3 5 /6 X 4 3 /8 Y 2 Printed from data file /2/205