EESTI STANDARD EVS-EN 753-3:2000 Identification card systems - Intersector thin flexible cards - Part 3: Test methods Identification card systems - Intersector thin flexible cards - Part 3: Test methods EESTI STANDARDIKESKUS
EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN 753-3:2000 sisaldab Euroopa standardi EN 753-3:99 ingliskeelset teksti. Käesolev dokument on jõustatud 11.01.2000 ja selle kohta on avaldatud teade Eesti standardiorganisatsiooni ametlikus väljaandes. Standard on kättesaadav Eesti standardiorganisatsioonist. This Estonian standard EVS-EN 753-3:2000 consists of the English text of the European standard EN 753-3:99. This document is endorsed on 11.01.2000 with the notification being published in the official publication of the Estonian national standardisation organisation. The standard is available from Estonian standardisation organisation. Käsitlusala: Part 3 og EN 753 specifies the test methods and procedures required to carry out controls for access to goods or services such as mass transit, highway toll systems, car parks, vouchers, stored value, etc..in order to carry our inspections or tests always with the same accuracy and to reproduce consistent results, this part of th EN 753 describes the methods to be used to test thin flexible card physical and magnetic recording characteristics. Scope: Part 3 og EN 753 specifies the test methods and procedures required to carry out controls for access to goods or services such as mass transit, highway toll systems, car parks, vouchers, stored value, etc..in order to carry our inspections or tests always with the same accuracy and to reproduce consistent results, this part of th EN 753 describes the methods to be used to test thin flexible card physical and magnetic recording characteristics. ICS.240.15 Võtmesõnad: Standardite reprodutseerimis- ja levitamisõigus kuulub Eesti Standardikeskusele
EN 753-3 ICS.240.15 July 99 English version Identification card systems Intersector thin flexible cards Part 3: Test methods Systèmes de cartes d identification Cartes souples minces intersectorielles Partie 3: Méthodes d essai Identifikationskartensysteme Branchenübergreifende dünne biegsame Karten Teil 3: Prüfverfahren This European Standard was approved by CEN on 99-07-01. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart, B-1050 Brussels 99. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN 753-3 : 99 E
Page 2 EN 753-3 : 99 5 5 6 6 7 11 15 15 15 15
Page 3 EN 753-3 : 99 20 21 23 23 24 25 25 27 27 27 27
Page 4 EN 753-3 : 99 38 38 38 39 39 39 40
Page 5 EN 753-3 : 99
Page 6 EN 753-3 : 99
Page 7 EN 753-3 : 99