PRODUCT RELEASE BULLETIN: MODBOX II LE Cabinet Set Harvard, MA 01451 Tel: 800 866 3827 Tel: 603 324 0200 Fax: 603 577 8770 Hampshire, England Tel: 44 (0) 1489 572111 Fax: 44 (0) 1489 559106 Warsaw, Poland Tel: 48 22 836 92 51 Fax: 48 22 836 92 55 Asia New Territories, Hong Kong Tel: 852 2637 3759 Fax: 852 2647 1082 South Pacific Victoria, Australia Tel: 61 3 9971 7111 Fax: 61 3 9971 7199 Visit our Web site at 1999, Molex Incorporated
MODBOX II LE fan unit Fun units appropriated for mounting in standing MODBOX II LE Cabinets, ensure air exchange and protect mounted equipment from overheating. Top mounted units don t use operating space in 19 rack. RAA- 00100 fan unit kit contains four ventilators, control panel with power supply cord without power plug, mounting screws. RAA-00101 kit contains two ventilators, two blank elements, control panel with power supply cord without power plug, mounting screws. At the front side of control panel are placed on/off switch and electricity fuse. There is available Thermostat with mounting kit (RAA-00105), ordered separately, which turn fun unit on when set temperature will be surpassed. It s recommended to use Rack Cabinet Base Filtering Plate (99.X2550) in combination with fan unit to avoid dust suction. RAA-00100 RAA-00101 Voltage rating: 220/230V, 50Hz Nominal current [A]: 0.24 0.48 Nominal power rating [W]: 30 60 Air capacity [m3/h]: 320 640 Weight [kg]: 2.4 3.2 Ventilator: Voltage rating [V]: 220/230 Frequency [Hz]: 50 60 Nominal power rating [W]: 15 14 Nominal current [ma]: 120 100 Speed [min-1]: 2600 2900 Static pressure [Pa]: 75 90 Air capacity [m3/h]: 162 192 Overall dimensions [mm]: 112 x 112 x 38 Control panel: Overall dimensions [mm]: 44 x 483 x 55 Power supply cord length [m]: 2.3 RAA-00100 RAA-00101 Product name MODBOX II LE fan unit, 4 fan, without power plug MODBOX II LE fan unit, 2 fan, without power plug Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes
MODBOX II LE 42U 600x600? RAA-00092 19 MODBOX II LE Cabinet set 42U, 600x600 Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes
MODBOX II LE 42U 600x800 1. New low cost version of 19 MOD- BOX II cabinet, 600x800mm, 42U high. 2. There are available two Fan Units designed to mount in MODBOX II LE cabinets providing air exchange inside cabinet and cooling active equipment (MODBOX II LE fan unit, 4 fan, without power plug - RAA- 00100 and MODBOX II LE fan unit, 2 fan, without power plug - RAA- 00101). Fan units are sold separately. 3. Possibility of mounting Rack Cabinet Base Filtering Plate (99.X2550) protecting from dust suction (ordered separately). 4. Possibility of joining two MODBOX II LE Cabinets side by side with MODBOX II Sleeve Alone, 4pcs Kit (RAA-00084). 5. Cable entry from every side when MODBOX II Plinth used (RAA- 00102). 6. When four point fixing devices are to mount in cabinet, it s possible to buy separately two racks for cabinet and mount it inside cabinet building rear 19 rack (RAA-00103, RAA- 00104). 7. Standard equipment comprise: - Light, strength and rigid construction - Aesthetical, glazed front door with lock left and right opened - Removable lateral shields ensure easy access to the interior of cabinet - Hand controlled legs ensure level adjustment. - All parts connected to the grounding bar. - Cable entry from bottom and back. 8. Adjustable frame depth allow user to mount non-standard size equipment. Dimensions: Width [mm]: 600 Height [mm]: 2056 Depth [mm]: 800 Material: Cold rolling steel sheet Paint Coat: Graphite powder varnish (RAL 7011) Weight [kg]: 104 RAA-00095 19 MODBOX II LE Cabinet set 42U, 600x800 Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes
MODBOX II LE 24U 1. New low cost version of 19 MOD- BOX II cabinet, 600x600mm, 24U high. 2. There are available two Fan Units designed to mount in MODBOX II LE cabinets providing air exchange inside cabinet and cooling active equipment (MODBOX II LE fan unit, 4 fan, without power plug - RAA- 00100 and MODBOX II LE fan unit, 2 fan, without power plug - RAA- 00101). Fan units are sold separately. 3. Possibility of mounting Rack Cabinet Base Filtering Plate (99.X2550) protecting from dust suction (ordered separately). 4. Possibility of joining two MODBOX II LE Cabinets side by side with MODBOX II Sleeve Alone, 4pcs Kit (RAA-00084). 5. Cable entry from every side when MODBOX II Plinth used (RAA- 00102). 6. When four point fixing devices are to mount in cabinet, it s possible to buy separately two racks for cabinet and mount it inside cabinet building rear 19 rack (RAA-00103, RAA- 00104). 7. Standard equipment comprise: - Light, strength and rigid construction - Aesthetical, glazed front door with lock left and right opened - Removable lateral shields ensure easy access to the interior of cabinet - Hand controlled legs ensure level adjustment. - All parts connected to the grounding bar. - Cable entry from bottom and back. 8. Adjustable frame depth allow user to mount non-standard size equipment. Dimensions: Width [mm]: 600 Height [mm]: 2056 Depth [mm]: 600 Material: Cold rolling steel sheet Paint Coat: Graphite powder varnish (RAL 7011) Weight [kg]: 62 RAA-00099 19 MODBOX II LE Cabinet set 24U, 600x600 Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes
MODBOX II plinth MODBOX II plinth, 600x600x100 is designed to co-operate with standing, 600x600mm MODBOX II LE Cabinets. Ensure excess cable storage and allows cables entry form four sides by rmoving blank panel. Graphite colour fix perfectly with grey cabinets. Dimensions: Width [mm]: 600 Depth [mm]: 600 Height [mm]: 100 Material: Cold rolling steel sheet Paint Coat: Graphite powder varnish (RAL 7011) Weight [kg]: 6.5 RAA-00102 MODBOX II plinth, 600x600x100 Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes
Racks Racks are designed to mount in MODBOX II LE Cabinets, which are equipped with front 19 only. Two additional racks installed in cabinet allow mounting of four point fixing device. Racks are not equipped with Rack Screw/CageNut/Washer Kit. Dimensions: Element Width Height Length [mm] [mm] [mm] RAA-00104 48 32 1067 RAA-00103 48 32 1866 Weight [kg]: RAA-00104: 1.54 RAA-00103: 2.70 Material: 2.0 mm thick cold rolling steel sheet RAA-00103 RAA-00104 Rack for 42U cabinet, 1 piece Rack for 24U cabinet, 1 piece Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes
Thermostat Appropriation of Thermostat with mounting kit is to control fan units installed into cabinet, it s simple regulator, which turn device on when set temperature is surpassed. Temperature range 0C to 60 C. Sensor element: termobimetal Temperature range [ C]: 0 60, hysteresis 7K Contact type: snap action contact Power carrying capacity: 6A (1) 250V AC Radio frequency interference: N according to VDE 0875 RAA-00105 Thermostat with mounting kit Sp. z o.o. Limited Asia Pacific.au reserves the possibility rights technic parameters changes