Technical Application Guide for UP-SHINE LED wall lamp UP-WL8-8W
Introduction WL8 LED wall light provides a stylish architectural luminaire for interior applications by the unique form and up light and down light functional design. WL8 adopts aluminum housing which provides excellent thermal management and 94-V fire rated PC which distributes softly lighting to creating comfortable atmosphere. Features: 1. LED wall light with hollow cone-shaped opal PC diffuser. 2. Both up light and down light effect. 3. Can be mounted with the cone-shaped diffuser upward or downward. 4. Built-in LED driver. 5. High ingress protection rating:ip65, IK1, Class I. 6. Ideal replacement for traditional Halogen or fluorescent wall lights. Application notes IP65 for indoor and outdoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas corridors, stairwells, reception areas, meeting rooms, pillars in open plan offices Certificates
Product Information 52 115 139 Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-WL8-8W AC1-24V 8W.9 6 18 o 3K 5h 8 No 139*115*52mm UP-WL8-8W AC1-24V 8W.9 67 18 o 4K 5h 8 No 139*115*52mm UP-WL8-8W AC1-24V 8W.9 656 18 o 5K 5h 8 No 139*115*52mm UP-WL8-8W AC1-24V 8W.9 65 18 o 57K 5h 8 No 139*115*52mm Driver data Sheet Driver data Non-dim Input rated Voltage Frequency Input Voltage AC1-24V 5/6Hz AC85-265V Efficiency 88% Total load Wattage 8W±.5W Power Factor.9 Rated input current Full load output Voltage Rated output current Output current range.9a DC65-75V 11mA 11mA±5% Power tolerance ±5% Current output tolerance ±5% Short circuit protection Over voltage protection Over temperature protection PASS PASS PASS Withstand voltage Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 8W Ⅰ IP65-2 o C~45 o C ~9% -2 o C~65 o C
Spectral Distribution 3K 4K.8 Max=3998 [1.=2] 2.79 SDCM F3K.8 Max=3688 [1.=2] 3.59 SDCM F4K.7.7.6.6.5.4.3 x=.4363 y=.3964.5.4.3 x=.3873 y=.3883.2.2.1.1. 38 5 6 7 8. 38 5 6 7 8 5K 57K.8 Max=5594 [1.=2] 3.83 SDCM F5K.8 Max=5971 [1.=2] 5.79 SDCM F57K.7.7.6.6.5.4.3 x=.3526 y=.3692.5.4.3 x=.3368 y=.359.2.2.1.1.. 38 5 6 7 8 38 5 6 7 8 Photometric Diagram 3K 4K Flux out: 18.77 lm Flux out: 22.75 lm -12-9 -/+18 12 9.7.63.56 MH=1m C/18 C9/27-12 -9 -/+18 12 9.8.72.64 MH=1m C/18 C9/27 4.49 5.56 8.42.35 1.48.4 12.28 15.32 16.21 2.24-3 2 3.14.7-3 25 3.16.8 AVERAGE BEAM ANGLE(5%): 18.6 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 61.34deg Diameter AVERAGE BEAM ANGLE(5%): 171.2 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 62.64deg Diameter 5K 57K Flux out: 23.54lm Flux out: 23.35 lm -12-9 -/+18 12 9.8.72.64 MH=1m C/18 C9/27-12 -9 -/+18 12 9.75.675.6 MH=1m C/18 C9/27 5.56 4.525 1.48.4 8.45.375 15.32 12.3 2.24 16.225-3 25 3.16.8-3 2 3.15.75 AVERAGE BEAM ANGLE(5%): 168.5 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 62.13deg Diameter AVERAGE BEAM ANGLE(5%): 18.1 DEG -25-2 -15-1 -5 5 1 15 2 25 Height Eavg, Emax Angle: 63.42deg Diameter
Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 4 9 O -6 O -3 O 8 12 16 2 O 6 O 3 O AVERAGE BEAM ANGLE (5%): 18.1 DEG C/18, 125.1 deg C3/21, 13.7 deg C6/24, 115.2 deg C9/27, 349.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) 8 7 6 5 4 3 2 1 65 o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% 8% 75% FLUX.1.5 U'V' 7%. 1 2 3 4 5 6 7 8 9 1 LifeTime (hours).35.3.25.2.15 Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C. The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) 9 8 7 6 5 4 3 2 1 11:35:42 11:53:29 12:11:29 12:29:29 12:47:29 13:5:29 13:23:29 13:41:29 13:59:29 14:17:29 14:35:29 14:53:29 15:11:29 15:29:29 15:47:29 16:5:29 16:23:29 16:41:29 16:59:29 17:17:29 Time IC Capactior MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.
Installation Step1 Step2 Step3 Take out wall light and accessory pack from package. Fix the plastic anchor into wall. Loose screws and take out the bracket from lamp body. Step4 Fix the bracket on the wall with screws Step5 Open junction box, connect "L","N", G wires to terminal block respectively and lock the driver box, then fix the light on the wall. Step6 Switch on after complete installation. OFF ON L = BROWN N = BLUE = YELLOW-GREEN Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 38*32*28.415 13.5 24 CTNS Q'TY(PCS) VOLUME(CBM) 2'' standard container 798 19152 28 4'' standard container 1596 3834 56 Phone: +86 755 2919 7332 Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China