H&H ENGINEERED MOLDED PRODUCTS, INC.

COMPLETE PLASTIC INJECTION MOLDING FACILITY INCLUDING (18) MOLDING MACHINES, AUXILIARY, TOOLROOM, FACILITIES AND SUPPORT EQUIPMENT See Instructions on Page 2 To Become a Qualified Bidder on the Internet Plant Closed H&H ENGINEERED MOLDED PRODUCTS, INC. 6230 Cochran Road Solon, Ohio 44139 In back end of strip industrial building behind N.E.S. Enterprises 20 Miles Southeast of Cleveland, Ohio SALE DATE: WEDNESDAY, FEBRUARY 13TH, STARTING AT 9:00 AM INSPECTION: TUESDAY, FEBRUARY 12TH FROM 10:00 AM TO 4:00 PM (19) Plastic Injection s By Van Dorn, Toshiba and Others To 500 Ton (15) Van Dorn Plastic Injection s (2) 5-Ton Free-Standing Crane Systems (New 2008) Sale Under The Management Of CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers appraisers since 1961 cia-auction.com info@cia-auction.com 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

WEDNESDAY, FEBRUARY 13TH 1995 Late Model 500 Ton X 80 Oz. Van Dorn Model 500-HT-80 Horizontal Toggle Clamp Plastic Injection (2) 12 Dia. X 24 High Brock Galvanized Corrugated Skirted Silos 1996 400 Ton X 48 Oz. Van Dorn Model 400-HT-48 Horizontal Toggle Clamp Plastic Injection Retrofitted PLASTIC INJECTION MOLDING MACHINES 500 Ton X 80 Oz. Van Dorn Model 500-HT-80 Horizontal Toggle Clamp Plastic Injection ; S/N 0363, Machine #13, Pathfinder 2500 Control, 32.5 X 32.5 Distance Between Tie Bars, 48 X 48 Platen Size, 11 Min Mold Height, 48-1/2 Max Daylight (New 1995) 450 Ton X 60 Oz. Van Dorn Model 450-RS-60F Horizontal Toggle Clamp Plastic Injection ; S/N 880, Machine #15, Allen-Bradley Quickpanel Upgraded Control, 30 X 30 Distance Between Tie Bars, 47 X 47 Platen Size, 11 Min Mold Height, 49-1/2 Max Daylight (New 1990) 450 Ton X 60 Oz. Van Dorn Model 450-RS-60VV Horizontal Toggle Clamp Plastic Injection ; S/N 834, Machine #1, Allen-Bradley Proface Upgraded Control, 30 X 30 Distance Between Tie Bars, 46-1/2 X 48 Platen Size, 11 Min Mold Height, 48 Max Daylight (New 1987) 400 Ton X 48 Oz. Van Dorn Model 400-HT-48 Horizontal Toggle Clamp Plastic Injection ; S/N 0561, Machine #14, Pathfinder 2500 Control, 28 X 28 Distance Between Tie Bars, 42 X 42 Platen Size, 51 Max Daylight (New 1996) 1998 450 Ton X 60 Oz. Van Dorn Model 450-RS-60VV Horizontal Toggle Clamp Plastic Injection WEBCAST BIDDER INSTRUCTIONS All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if you do not you will not be approved. All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period. There is a 18% Buyer s Premium in Effect for All Online Purchases. We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer s Premium. No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than 48-Hours Prior to the Start of the Auction. 190 Ton X 16 Oz. Toshiba Model ISG190NV10-10A Horizontal Hydraulic Clamp Plastic Injection

H&H ENGINEERED MOLDED PRODUCTS, INC. 1997 Remanufactured 2000 (2) 170 Ton X 14 Oz. Van Dorn Model 170HT14 Machines 300 Ton X 30 Oz. Van Dorn Model 300-RS-30F-HT Machine 300 Ton X 30 Oz. Van Dorn Model 300RS-30F Horizontal Toggle Clamp Plastic Injection 300 Ton X 30 Oz. Van Dorn Model 300-RS-30F-HT Machine; S/N 2374, Machine #11, Allen-Bradley Proface Digital Upgraded Control, 25 X 25 Distance Between Tie Bars, 39 X 41 Platen Size, 7 Min Mold Height, 42 Max Daylight (New 1992) 300 Ton X 30 Oz. Van Dorn Model 300RS-30F Machine; S/N 1091, Machine #2, SCI Scoremaker Plus Upgraded Control, 24 X 24 Distance Between Tie Bars, 39 X 39 Platen Size, 9-1/2 Min Mold Height, 35 Max Daylight, Remanufactured by AC Wilson Enterprises 2000 (Remanufactured 2000) 300 Ton X 14 Oz. Van Dorn Model 300RS-14F Machine; S/N 1231, Machine #3, SCI Scoremaker Upgraded Control, 24 X 24 Distance Between Tie Bars, 39 X 39 Platen Size, 12 Min Mold Height, 33 Max Daylight, Remanufactured by AC Wilson Enterprises 2000 (Remanufactured 2000) (2) 200 Ton X 30 Oz. Van Dorn Model 200-RS-30F Machines; S/N 1833, Machine #8, S/N 1329, Machine #10, Allen-Bradley Proface Digital Upgraded Control, 21 X 18 Distance Between Tie Bars, 31 X 33 Platen Size, 10 Min Mold Height, 29-1/2 Max Daylight 200 Ton X 14 Oz. Van Dorn Model 200-RS-14F Machine; S/N 2013, Machine #9, Allen-Bradley Total Control Quickpanel II Upgraded Control, 21 X 18 Distance Between Tie Bars, 31 X 33 Platen Size, 10 Min Mold Height, 29-1/2 Max Daylight 200 Ton X 14 Oz. Newbury Model 200-14 Machine; S/N N/A, Machine #16, Siemens Touchpanel Upgraded Control, 18 X 18 Distance Between Tie Bars, 28 X 28 Platen Size (Machine Not In Service - Parts Missing) 190 Ton X 16 Oz. Toshiba Model ISG190NV10-10A Horizontal Hydraulic Clamp Plastic Injection ; S/N 821205, Machine #5, Injectvisor V10 Control, 22 X 20 Distance Between Tie Bars, 31 X 29 Platen Size, 9 Min Mold Height, 36 Max Daylight (New 1998) (2) 170 Ton X 14 Oz. Van Dorn Model 170HT14 Machines; S/N s 1027 & 1030, Machine #6 & #7, Pathfinder 4500 Controls, 20 X 20 Distance Between Tie Bars, 31-1/2 X 31-1/2 Platen Size, 5 Min Mold Height, 33 Max Daylight (New 1997) (1) Star Automation Model XQ-800-VC Sprue Picker Robot; S/N SP8F4S-0249 To Be Sold Separately 170 Ton X 14 Oz. Van Dorn Model 170-HT-14F Machine; S/N 0734, Machine #205, Pathfinder 2500 Control, 20 X 20 Distance Between Tie Bars, 30-1/2 X 32 Platen Size, 8 Min Mold Height, 30 Max Daylight (New 1995) 150 Ton X 8 Oz. Van Dorn Model 150-RS-8F Machine; S/N 836, Machine #12, Relay Control, 18 X 16 Distance Between Tie Bars, 27-1/2 X 26-1/2 Platen Size Star Automation Model XQ-800-VC Sprue Picker Robot; S/N SP4F8S-0115 To Be Sold Separately (2) 120 Ton X 6 Oz. Nissei Model FS120S18ASE Horizontal Hydraulic Clamp Plastic Injection s; S/N S12P176, Machine #17, S/N S12P150, Machine #18, NC9000G Control, 16 X 16 Distance Between Tie Bars, 23-1/2 X 23-1/2 Platen Size (New 1995) (2) Star Automation Model XQ-800-VC Sprue Picker Robots; S/N SP8F4S-0591 and S/N SP8F4S- 0414 To Be Sold Separately MATERIAL STORAGE SILOS (2) 12 Dia. X 24 High Brock Galvanized Corrugated Skirted Silos; w/ Truck Fills, Ladder & Crosswalk and Material Take Off Boxes (Late Model, Excellent Condition) Monitor Silopatrol (2) Silo Inventory System w/ Remote Readout Remanufactured 2000 300 Ton X 14 Oz. Van Dorn Model 300RS-14F Horizontal Toggle Clamp Plastic Injection Retrofitted 450 Ton X 60 Oz. Van Dorn Model 450-RS-60F Horizontal Toggle Clamp Plastic Injection 1995 (2) 120 Ton X 6 Oz. Nissei Model FS120S18ASE Horizontal Hydraulic Clamp Plastic Injection Molding Machines 2004/2005 (9) Budzar Mold Temperature Controllers (18) Sterlco Model SEUC-9-4-2 Mold Temperature Controllers 2008/2009 (18) Sterlco Model SEUC-9-4-2 Mold Temperature Controllers (2) 200 Ton X 30 Oz. Van Dorn Model 200-RS-30F Horizontal Toggle Clamp Plastic Injection s

WEDNESDAY, FEBRUARY 13TH 2002 Maguire Model WSB-221 Three- Component Weigh Scale Blender (1) Star Automation Model XQ-800-VC Sprue Picker Robot (2) Star Automation Model XQ-800-VC Sprue Picker Robots 30 Ton Berg Model PR-30-2-3P Cabinet Enclosed Chilling System LAB EXTRUDER LINE Killion / Davis Standard Profile Extrusion Line Consisting of; 1.5 Dia. Killion 20:1 L/D Air Cooled Single Screw Extruder; S/N 21200 (3) Barrel, (2) Die & (1) Clamp Ring Temperature Zones 10 X 8 X 8 Killion S.S. Vacuum Sizing Tank; S/N 21297,.5 HP Pump Motor, Tank 8 X 8 X 8 Killion S.S. Open Cooling Trough; S/N 21296 MOLD TEMPERATURE CONTROLLERS (18) Sterlco Model SEUC-9-4-2 Mold Temperature Controllers; 9 KW,.75 Hp, 460 Volt (New 2008-2009) (9) Budzar Mold Temperature Controllers; 9 KW,.75 HP, 460 Volt (New 2004-2005) (6) Budzar Model 1WT-9-1.5-.25-DS-460 Mold Temperature Controllers; 9 KW, 1.5 HP, 460 Volt (New 2004-2006) Conair Tempro Model TC1-D1 Mold Temperature Controller; S/N 89J120, 12 KW,.75 HP, 460 Volt Conair Tempro Model TC1-D1 Mold Temperature Controller; S/N 95D113, 9 KW,.75 HP, 460 Volt Chromalox Model Microtherm CMX-250-18C Mold Temperature Controller; S/N 141-123621-509, 480 Volt WEIGH SCALE BLENDER Maguire Model WSB-221 Three-Component Weigh Scale Blender; S/N 83953 (Controller) ounted on Gaylord Fill Stand w/ (2) Whitlock Central Vacuum Receivers PLASTIC GRANULATORS (4) 8 X 8 CMB Wittmann Model MB88 Granulators; S/N s 8564 (2004), 8524 (2003), 26484 (2006) & 8565 (2004), 5 HP, 460 Volt (New 2003-2006) 9 X 12 Polymer Model 912 Silenator Granulator; S/N 3000304, 10 HP, 460 Volt, Sound Enclosure 15 X 17 Bi-Cutter Granulator; S/N 140164-1, 1.5 KW, 460 Volt MATERIAL DRYERS Novatec Model MDM-25 Dehumidifying Dryer; S/N 10A066-1585, 460 Volt, 100 LB Insulated Hopper, Pneu- Con Vacuum Loader on Cart (New 1995) Comet Model SD-50 Dehumidifying Dryer; S/N 980402, 480 Volt, Insulated Hopper, IMS Vacuum Loader on Cart Novatec Model NPD-50 Dehumidifying Dryer; S/N 3-5017-1187, 460 Volt, w/ 400 LB Cap. Novatec Insulated Drying Hopper on Stand; S/N 3-9506-0580 (New 1993) Bry-Air Systems Model RD-50 Dehumidifying Dryer; S/N 20013113726, 460 Volt, w/ 100 LB Cap. Drying Hopper on Cart HOT RUNNER CONTROLLERS (9) Assorted (2-8) Zone ITC Portable Hot Runner Controllers; w/6-30 KVA, 480 Volt Primary, 240 Volt Secondary Transformers CENTRAL CHILLER SYSTEM Carrier Model Aqua-Snap 30MPW03060A01005 Dual Compressor Chiller; S/N 281Q19396, R-410A Refrigerant 120 Ton Advantage Cooling Tower System Including; Model PTS-1200-SP, 1,200 S.S. Gallon Pump Tank w/ (4) Pumps Total, (1)25 HP Process and (1) 7.5 HP Recirculation w/ Back Up Pumps for Each w/ Diverter Valves, Advantage Engineering Fiberglass Power Tower Cell, Filter & Control Panel; S/N 17555 (New 1993) CHILLERS 30 Ton Berg Model PR-30-2-3P Cabinet Enclosed Chilling System; S/N W00994A-AC1-0702, R-22 Freon Refrigerant w/ Refplus Model CLD042-9 Air Cooled Condenser (New 2002) 5 Ton Berg Model PA-5 Cabinet Enclosed Chilling System; S/N W01025A-AA1-0902, R-22 Freon Refrigerant, 6.9 LB/Circ, 8 HP (New 2002) SONIC WELDER 1,200 Watt Ultrasonic Seal Model P201 Ultrasonic Welder CENTRAL LOAD SYSTEM (11) 1.5 Cu. Ft. Una-Dyn Central Vacuum Loaders; P/N #N99259554.06, M/O #259554.06, w/ Remote Inventory Control Boxes (6).75 Cu. Ft. Una-Dyn Central Vacuum Loaders; P/N #N99259554.05, M/O #259554.05 w/ Remote Inventory Control Boxes (2) 5 HP Una-Dyn Vacuum Pumps; S/N s 259554.01-02-805 & 259554.01-01-0805 (2) Una-Dyn Dustmaster Filters; P/N #DMABD11, M/O #259554.04, P/N #DMABD11, M/O #259554.04 Approx. 2400 2 Aluminum Feed Tubing, Sweeps, Elbows and Couplings 2003/2006 (4) 8 X 8 CMB Wittmann Model MB88 Granulators Una-Dyn Central Material Load System Partial View Dehumidifying Dryer Systems 1.5 Dia. Killion 20:1 L/D Air Cooled Single Screw Extruder 120 Ton Advantage Cooling Tower System (9) Assorted (2-8) Zone ITC Portable Hot Runner Controllers

WEDNESDAY, FEBRUARY 13TH 2008 2008 Free-Standing 5 Ton X 13-2 Approx. Span X 113 Approx. Long Free-Standing Overhead Crane System Free-Standing 5 Ton X 10-8 Approx. Span X 140 Approx. Long Free-Standing Overhead Crane System FREE-STANDING CRANE SYSTEMS 5 Ton X 13-2 Approx. Span X 113 Approx. Long Free-Standing Overhead Crane System; S/N 2198071, 5 Ton X 13-2 Span Konecranes Model A32687 Single Girder Bridge Crane, 5 Ton Konecranes Model CXT400 Cable Hoist, Remote Control, Structural Dimensions (Approx.): 158 Span (179 to Outside), 113 Total Run ((4) Uprights w/ 25 Centers & (1) Upright w/ 13 Center), 175 to Top of Rail, 200 to Top of Hoist / Bridge, 146 Under Hook (New 2008) 5 Ton X 10-8 Approx. Span X 140 Approx. Long Free-Standing Overhead Crane System; S/N 2198070, 5 Ton X 10-8 Approx. Span Konecranes Model A32688 Single Girder Bridge Crane, Konecranes Model CXT400 Cable Hoist, Remote Control, Structural Dimensions (Approx.): 130 Span (151 to Outside), 140 Total Run ((5) Uprights w/ 25 Centers) & ((1) Upright w/ 15 Centers), 175 to Top of Rail, 200 to Top of Hoist / Bridge, 146 Under Hook (New 2008) BUSWAY / ELECTRICAL EQUIPMENT 120 ITE Cat No. U310AVP 800-Amp / 600-Volt 3-Pole Busway (12) ITE Model XL-U Fusible Switch Plugs; 600 Volt / 100 Amp / 75 Max HP, Cat #UV363G, UV363, 303W System (11) Gould / ITE Model XL- Universal Fusible Bus Plugs; 600 Volt / 30 Amp / 20 Max HP, Cat #UV361, 303W System Approx. 115 12 Wide Aluminum Cable Tray Approx. 700 Heavy Copper Wire Servicing Buss Bar & Machine (No Main Disconnect) TOOLROOM MACHINERY 12 X 24 Chevalier Model FSG- 3A1224 Hydraulic Surface Grinder; S/N P3952003, w/ 12 X 24 Chevalier Model E1C-3060C Electric Chuck (New 2006) 2 HP Bridgeport Variable Speed Vertical Milling Machine; S/N BR259137, 9 X 42 Power Feed Table 1-1/2 HP Bridgeport Variable Speed Vertical Milling Machine; S/N 2J-2546, 10 X 52 T-Slotted Table 1 HP Bridgeport 8-Speed Vertical Milling Machine; S/N 92375, 9 X 42 Table 16 X 60 Model LC360A Engine Lathe; 26-1600 RPM, Portable 3-Jaw Chuck, Dorian Model SD35CXA Tool Post, 4-Jaw Chuck 20 Wilton Model 2550 Floor Drill; S/N 7040043, 14 X 16 T-Slotted Adjustable Table 8 X 10 Ellis Model 1600 Portable Horizontal Band Saw; S/N 16041219, 110 Volt 7 X 12 Dayton Horizontal Portable Horizontal Band Saw FORKLIFTS / SCISSOR LIFTS / SCRUBBER AND RELATED 4,250 LB. Caterpillar Model GC25K Cushion Tire LP Gas Forklift; S/N AT82D01380, SS, 3-Stage Mast 3,650 LB. Yale Model ERPO40 Electric 3-Wheel Sit Down Forklift; S/N E807N03051Y, SS, 36-Volt JLG Model 2032E2 Self Traveling Electric Scissorlift; Non-Marking Tires, Built In Charger Skyjack Model SJIII 39219 Electric Scissor Lift; S/N 225831, 19 Lift, 500 LB Capacity, 24 Volt, 24 X 60 Platform w/ Exit, 408 Hours Tennant Model M5400 Walk Behind Scrubber; S/N 5400-10187762, 24 Volt, 17 Hours MISC. MACHINERY AND SUPPORT EQUIPMENT Wulftec Model WHP-200 Rotary Stretch Wrap Machine; S/N 1299-5315, 50 X 50 Platform 2,000 LB Vestil Model TMS-20DC Portable Gaylord Tipper; S/N 5350364-1 (New 2006) (6) Zebra Technologies Model 110X iiii Label Printers 10 X 12 Modular Shop Office Enclosure; Insulated Panel, Lights / Electric and Door (Only (2) Sides, Inside Connects to Building Walls) AIR COMPRESSORS / DRYERS 60 HP Quincy Model QSI300ACA31EC Cabinet Enclosed Rotary Screw Air Compressor; S/N UN049569, Hours: 54,746 (New 2004) 50 HP Gardner Denver Model EDE0JD Cabinet Enclosed Rotary Screw Air Compressor Zeks Heat Sink Model 300HSGA400 True Cycle Air Dryer; S/N 239234-2, R404 Refrigerant, 6859 Hours Palatek Model PRD-200 Compressed Air Dryer; S/N H200A4603609910125 400 Gallon Silvan Vertical Air Receiving Tank; S/N 167177, 3 Dia. X 5 10 High PALLET RACKING / MOLD RACKS (9) 2,000 LB Ridg-U-Rak Sliding Shelf Die / Mold Racks; 48 X 48 Platforms, Adjustable Pull-Out Shelves Wulftec Model WHP-200 Rotary Stretch Wrap Machine (18) Sections 42 X 96 X 16 Tear Drop Style Pallet Rack; Wire Decking, 3 Face Crossmembers, 3 X 3 Upright Posts (7) Sections 42 X 96 X 16 Tear Drop Adjustable Beam Pallet Rack; Wire Decking, 4 Face Crossmembers, 3 X 3 Upright Posts (4) Sections 48 X 96 X 14 Tear Drop Adjustable Beam Pallet Rack; Wire Decking, 4 Face Crossmembers, 3 X 3 Upright Posts (26) 16 Tear Drop Pallet Rack Uprights; 42 Deep, 3 X 3 Posts 1- Section Single Sided Cantilever Rack; 14 Arms INSPECTION EQUIPMENT Inspection Equipment Consisting of; 36 X 48 Metroplate Portable Granite Inspection Table, 18 SPI Digital Height Gauge, 12 SPI Digital Height Gauge, 24 X 36 Precision Portable Granite Surface Plate, & Other Related Items SHOP EQUIPMENT Late Model Shop Equipment Consisting of; Nine-Drawer Vidmar Storage Cabinet, (5) Lyon H.D. Steel Inventory Cabinets w/ Plastic Totes, (2) Capsa Corp Inc. H.D. Steel Cabinets, Lyon Maple Top Workbench, 48 X 48 Floor Scale w/ Sterling Model 825 Counting Scale Readout, (3) 42 Hurricane Portable Floor Fans, (13) Pedestal Fans by Dayton, Lasko & Air King, 6 Jet Bench Grinder, 48 X 96 Heavy Duty Steel Die Repair Table, (10) 32 X 60 Portable Steel Workstations, Rubbermaid Trade Master Portable Tool Chest, (6) Cotterman 30 Shop Steps, (4) Dayton Pallet Trucks, (2) Banding Carts, (2) 24 X 48 Dayton Model 4ZD01J Scissor Lift Carts, Fireproof Cabinet, 13 Box Stitcher, Metro Carts, 90 X 144 Parts Web Enclosure w/ Locking Door, Benches, Shop Carts, Two- Wheel Hand Trucks, Two-Door Cabinets, Employee Lockers, Cleaning Supplies, Maintenance Equipment, Hardware Bins, Perishable Tooling, Machine Accessories, Column Mount Fans, Hose Reels, Extension Cords, Air Hose, & Other Related Items Building Maintenance Supplies & Machine Parts Including; 30 HP General Electric Motor, 30 HP US Tools Electric Motor, 50 HP Lincoln Ultimate E1 Electric Motor, 7.5 HP Dayton Electric Motor, Approx. (120) Heater Bands of Various Sizes, 7.5 HP Vector 460 Volt Variable Speed AC Drive Motor; Contrac Gearbox & Baldor Control (These are loose surplus components on skid), Motors, Fuses, Electrical Components, Hold Downs and Many Other Related Items (9) 2,000 LB Ridg-U-Rak Sliding Shelf Die / Mold Racks 120 ITE Cat No. U310AVP 800-Amp / 600-Volt 3-Pole Busway 60 HP Quincy Model QSI300ACA31EC Cabinet Enclosed Rotary Screw Air Compressor 2006 2004 12 X 24 Chevalier Model FSG-3A1224 Hydraulic Surface Grinder (3) Vertical Milling Machines By Bridgeport and Others

(19) s To 500 Ton (15) Van Dorn s COMPLETE PLASTIC INJECTION MOLDING FACILITY INCLUDING (18) MOLDING MACHINES, AUXILIARY, TOOLROOM, FACILITIES AND SUPPORT EQUIPMENT Plant Closed H&H ENGINEERED MOLDED PRODUCTS, INC. 6230 Cochran Road - Solon, Ohio 44139 In back end of strip industrial building behind N.E.S. Enterprises 20 Miles Southeast of Cleveland, Ohio SALE DATE: Wednesday, February 13th STARTING AT 9:00AM INSPECTION: Tuesday, February 12th from 10:00 AM to 4:00 PM Cincinnati Industrial Auctioneers Inc. 2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760 WEBSITE: cia-auction.com (2) Free-Standing Crane Systems New 2008 FIRST CLASS MAIL! OF Important Mail TO BE DIRECTED TO THE ATTENTION EXECUTIVE PERSONNEL Late Model Facilities Equipment PRE-SORT FIRST CLASS U.S. POSTAGE PAID CINCINNATI, OHIO PERMIT NO. 3593 WEDNESDAY, FEBRUARY 13TH Plant Closed H&H ENGINEERED MOLDED PRODUCTS, INC. 6230 Cochran Road - Solon, Ohio 44139 In back end of strip industrial building behind N.E.S. Enterprises 20 Miles Southeast of Cleveland, Ohio IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure. PHOTOGRAPHY BY JOSEPH M. LUGGEN DIRECTIONS From the I-271/I-480N/US-422E intersection East of Cleveland, go East on US-422E. Proceed about 2.5 miles to the Harper Road exit. Turn right and go south on Harper Road about 1/2 mile where Harper Road turns into Cochran Road. Follow Cochran Road about 1/2 mile to 6230 on the right, the Auction is in the rear section of the building so pull to back of lot and watch for auction parking and sale entrance signs and arrows. If you come to Solon Road, you have gone about.1 miles too far. AUCTIONEERS Cincinnati Industrial Auctioneers, Inc. License No. 63-1983-10439 Jeffrey L. Luggen License No. 57-1983-33789 Jerome A. Luggen License No. 52-1983-33799 Jeffrey M. Luggen License No. 2010-0000-26 Joseph M. Luggen License No. 2010-0000-19 John F. Rome License No. 57-2000-84249 TERMS OF SALE All equipment described herein will be sold as is, where is to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of purchase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website. 15% ONSITE BUYER S PREMIUM 18% ONLINE BUYER S PREMIUM Sale Under The Management Of CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers appraisers since 1961 cia-auction.com info@cia-auction.com 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760