ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC TR 29181-5:2014 - Information technology - Future Network - Problem statement and requirements - Part 5: Security. ISO/IEC TR 29181-2:2014 - Information technology - Future Network - Problem statement and requirements - Part 2: Naming and addressing. ISO/IEC 90003:2014 - Software engineering - Guidelines for the application of ISO 9001:2008 to computer software. ISO/IEC 24775-7:2014 - Information technology - Storage management - Part 7: Host Elements. ISO/IEC 24775-8:2014 - Information technology - Storage management - Part 8: Media Libraries. ISO/IEC 24775-6:2014 - Information technology - Storage management - Part 6: Fabric. ISO/IEC 24775-5:2014 - Information technology - Storage management - Part 5: File systems. ISO/IEC 19763-10:2014 - Information technology - Metamodel framework for interoperability (MFI) - Part 10: Core model and basic mapping. ISO/IEC 24752-6:2014 - Information technology - User interfaces - Universal remote console - Part 6: Web service integration. ISO/IEC 24752-2:2014 - Information technology - User interfaces - Universal remote console - Part 2: User interface socket description. ISO/IEC 24752-5:2014 - Information technology - User interfaces - Universal remote console - Part 5: Resource description. ISO/IEC 24752-4:2014 - Information technology - User interfaces - Universal remote console - Part 4: Target description. ISO/IEC 24752-1:2014 - Information technology - User interfaces - Universal remote console - Part 1: General framework. ISO/TC 8 - Ships and marine technology ISO/PAS 19697:2014 - Ships and marine technology - Navigation and ship operations - Electronic inclinometers. ISO/TC 17 - Steel
ISO 4996:2014 - Hot-rolled steel sheet of high yield stress structural quality. ISO/TC 20 - Aircraft and space vehicles ISO 15845:2014 - Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements. ISO/TC 21 - Equipment for fire protection and fire fighting ISO 7240-8:2014 - Fire detection and alarm systems - Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor. ISO 6182-12:2014 - Fire protection - Automatic sprinkler systems - Part 12: Requirements and test methods for grooved-end components for steel pipe systems. ISO/TC 23 - Tractors and machinery for agriculture and forestry ISO 16119-4:2014 - Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers. ISO 9635-5:2014 - Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves. ISO 24631-5:2014 - Radio frequency identification of animals - Part 5: Procedure for testing the capability of RFID transceivers of reading ISO 11784 and ISO 11785 transponders. ISO/TC 27 - Solid mineral fuels ISO/TS 18806:2014 - Solid mineral fuels - Determination of Chlorine content. ISO/ TC 28 - Petroleum products and related products of synthetic or biological origin ISO 26422:2014 - Petroleum and related products - Determination of shear stability of lubricating oils containing polymers - Method using a tapered roller bearing. ISO/TC 29 - Small tools ISO 12164-3:2014 - Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools. ISO 12164-4:2014 - Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools. ISO 3919:2005/Amd 1:2014 - Coated abrasives - Flap wheels with shaft.
ISO/TC 34 - Food products ISO 11136:2014 - Sensory analysis - Methodology - General guidance for conducting hedonic tests with consumers in a controlled area. ISO/TC 37 - Terminology and other language and content resources ISO 24617-7:2014 - Language resource management - Semantic annotation framework - Part 7: Spatial information (ISOspace). ISO/TC 39 - Machine tools ISO 10791-6:2014 - Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations. ISO/TC 45 - Rubber and rubber products ISO 2005:2014 - Rubber latex, natural, concentrate - Determination of sludge content. ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 12736:2014 - Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures. ISO 19901-3:2014 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure. ISO/TC 70 - Internal combustion engines ISO 7967-11:2014 - Reciprocating internal combustion engines - Vocabulary of components and systems - Part 11: Fuel systems. ISO/TC 84 - Devices for administration of medicinal products and catheters ISO 11608-1:2014 - Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems. ISO/TC 92 - Fire safety ISO 17554:2014 - Reaction to fire tests - Mass loss measurement.
ISO 10294-1:1996/Amd 1:2014 - Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method. ISO 10294-4:2001/Amd 1:2014 - Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen. ISO/TC 110 - Industrial trucks ISO 22915-22:2014 - Industrial trucks - Verification of stability - Part 22: Lateral- and frontstacking trucks with and without elevating operator position. ISO/TC 130 - Graphic technology ISO 15341:2014 - Graphic technology - Method for radius determination of printing cylinders. ISO 16684-2:2014 - Graphic technology - Extensible metadata platform (XMP) - Part 2: Description of XMP schemas using RELAX NG. ISO 16760:2014 - Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows. ISO/TC 145 - Graphical symbols ISO 7010:2011/Amd 6:2014 - Graphical symbols - Safety colours and safety signs - Registered safety signs. ISO/TC 147 - Water quality ISO 5667-14:2014 - Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling. ISO/TC 154 - Processes, data elements and documents in commerce, industry and administration ISO 9735-10:2014 - Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 2) - Part 10: Syntax service directories. ISO/TC 171 - Document management applications ISO 12651-2:2014 - Electronic document management - Vocabulary - Part 2: Workflow management.
ISO 14739-1:2014 - Document management - 3D use of Product Representation Compact (PRC) format - Part 1: PRC 10001. ISO 14289-1:2014 - Document management applications - Electronic document file format enhancement for accessibility - Part 1: Use of ISO 32000-1 (PDF/UA-1). ISO/TC 172 - Optics and photonics ISO 8039:2014 - Microscopes - Values, tolerances and symbols for magnification. ISO/TC 173 - Assistive products for persons with disability ISO 16840-10:2014 - Wheelchairs - Resistance to ignition of non-integrated seat and back support cushions - Part 10: Requirements and test methods. ISO/TC 174 - Jewellery ISO 15096:2014 - Jewellery - Determination of silver in 999 0/00 silver jewellery alloys - Difference method using ICP-OES. ISO/TC 181 - Safety of toys ISO 8124-1:2014 - Safety of toys - Part 1: Safety aspects related to mechanical and physical properties. ISO/TC 184 - Automation systems and integration ISO 10303-59:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 59: Integrated generic resource - Quality of product shape data. ISO 10303-42:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 42: Integrated generic resource: Geometric and topological representation. ISO/TS 10303-409:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 409: Application module: AP209 multidisciplinary analysis and design. ISO 10303-101:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 101: Integrated application resource: Draughting. ISO 10303-41:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support.
ISO 10303-44:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 44: Integrated generic resource: Product structure configuration. ISO 10303-45:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 45: Integrated generic resource: Material and other engineering properties. ISO/TS 10303-410:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 410: Application module: AP210 electronic assembly interconnect and packaging design. ISO 10303-105:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics. ISO 10303-47:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 47: Integrated generic resource: Shape variation tolerances. ISO 10303-518:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 518: Application interpreted construct: Mechanical design shaded presentation. ISO 10303-522:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 522: Application interpreted construct: Machining features. ISO/TS 10303-442:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 442: Application module: AP242 managed model based 3D engineering. ISO/TS 10303-3001:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 3001: Business object model: Managed model based 3d engineering. ISO/TS 10303-1127:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1127: Application module: File identification. ISO/TS 10303-1142:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1142: Application module: Requirement view definition relationship. ISO/TS 10303-1603:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1603: Application module: Analytical model. ISO/TS 10303-1642:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1642: Application module: Assembly module usage view. ISO/TS 10303-1650:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1650: Application module: Bare die. ISO/TS 10303-1686:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1686: Application module: Interconnect module usage view.
ISO/TS 10303-1698:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1698: Application module: Layered interconnect module design. ISO/TS 10303-1706:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1706: Application module: Non feature shape element. ISO/TS 10303-1707:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1707: Application module: Package. ISO/TS 10303-1718:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1718: Application module: Layered interconnect simple template. ISO/TS 10303-1803:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1803: Application module: Process plan. ISO/TS 10303-1636:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1636: Application module: Assembly module design. ISO/TS 10303-1051:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 1051: Application module: Geometric tolerance. ISO 10303-242:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 242: Application protocol: Managed model-based 3D engineering. ISO 10303-209:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 209: Application protocol: Multidisciplinary analysis and design. ISO 10303-210:2014 - Industrial automation systems and integration -- Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnect and packaging design. ISO 13584-20:1998/Cor 1:2014 - Industrial automation systems and integration - Parts library - Part 20: Logical resource: Logical model of expressions. ISO 10303-50:2002/Cor 2:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 50: Integrated generic resource: Mathematical constructs. ISO 10303-52:2011/Cor 1:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 52: Integrated generic resource: Mesh-based topology. ISO 10303-104:2000/Cor 2:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 104: Integrated application resource: Finite element analysis. ISO 10303-108:2005/Cor 2:2014 -Industrial automation systems and integration - Product data representation and exchange - Part 108: Integrated application resource: Parameterization and constraints for explicit geometric product models.
ISO 10303-111:2007/Cor 2:2014 -Industrial automation systems and integration - Product data representation and exchange - Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes. ISO 10303-109:2004/Cor 2:2014 - Industrial automation systems and integration - Product data representation and exchange - Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models. ISO/TC 188 - Small craft ISO 13297:2014 - Small craft - Electrical systems - Alternating current installations. ISO/TC 207 - Environmental management ISO/TS 14072:2014 - Environmental management - Life cycle assessment - Requirements and guidelines for organizational life cycle assessment. ISO/TC 212 - Clinical laboratory testing and in vitro diagnostic test systems ISO/TS 17822-1:2014 - In vitro diagnostic test systems - Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens - Part 1: General requirements, terms and definitions. ISO/TC 213 - Dimensional and geometrical product specifications and verification ISO 2692:2014 - Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR). ISO/TC 215 - Health informatics ISO/TS 13131:2014 - Health informatics - Telehealth services - Quality planning guidelines. IEC/TR 80001-2-5:2014 - Application of risk management for IT-networks incorporating medical devices - Part 2-5: Application guidance - Guidance for distributed alarm systems. ISO/TR 28380-3:2014 - Health informatics - IHE global standards adoption - Part 3: Deployment. ISO/TC 218 - Timber ISO 17959:2014 - General requirements for solid wood flooring.
ISO 13061-3:2014 - Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 3: Determination of ultimate strength in static bending. ISO 13061-4:2014 - Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 4: Determination of modulus of elasticity in static bending. ISO 13061-6:2014 - Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 6: Determination of ultimate tensile stress parallel to grain. ISO 13061-7:2014 - Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 7: Determination of ultimate tensile stress perpendicular to grain. ISO/TC 219 - Floor coverings ISO 24338:2014 - Laminate floor coverings - Determination of abrasion resistance. ISO/TC 221 - Geosynthetics ISO 13427:2014 - Geosynthetics - Abrasion damage simulation (sliding block test). ISO/TC 223 - Societal security ISO 22315:2014 - Societal security - Mass evacuation - Guidelines for planning. ISO/TC 242 - Energy Management ISO 50015:2014 - Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance. ISO 50006:2014 - Energy management systems - Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) - General principles and guidance. ISO 50004:2014 - Energy management systems - Guidance for the implementation, maintenance and improvement of an energy management system. ISO/PC 271 - Compliance management systems ISO 19600:2014 - Compliance management systems - Guidelines.