POOLPAK R-410A MPK SERIES MPK D - CABINET Model MS, Int. ACC, Int. Elec. Heat GENERIC DWINGS EGW07-DS00IACELE-20150217 Packaged Natatorium Environment Control System PENDING PoolPak MPK Series Natatorium Dehumidification Unit
The Leader in Indoor Pool Dehumidifi cation 3491 Industrial Drive. York, PA 17402. U. 800-959-7725. Fax 717-757-5085 for more information: www.poolpak.com
501.5 101.0 66.9 ELEC SECTION RHT FAR SIDE F NEAR & FAR 156.0 ACC SECTION ACC 114.0 120.0 6.0 99.56 BASE FRONT VIEW.72.84 7X CD NEAR & FAR SF NEAR & FAR 500.7 BASE LEFT VIEW ------------ LEGEND ------------ AC = REMOTE ACC CONNECTION ACC = AIR COOLED CONDENSER CD = CONDENTE DIN CMPR = COMPRESSOR(S) ACCESS CP = CONTROL PANEL ACCESS EA = EXHAUST AIR EF = EXHAUST FAN ACCESS ELEC = ELECTRIC HEAT EVAP = EVAPOTOR COILS FLUE = FURNACE FLUE FURN = GAS FURNACE F = FILTER SECTION ACCESS GAS = FURNACE CONNECTION GRD = GVITY RELIEF DAMPER HW = HOT WATER CONNECTION HWC = HOT WATER COILS OA = OUTSIDE AIR PA = PURGE AIR PF = PURGE FAN ACCESS PW = POOL WATER CONNECTION PWC = POOL WATER CONDENSER = RETURN AIR RHT = REHEAT COILS = SUPPLY AIR ST = STEAM CONNECTION SF = SUPPLY FAN ACCESS STM = STEAM COILS TXV = THERMAL EXPANSION VALVES VFD = VARIABLE FREQUENCY DRIVES EVAP PWC 3X CMPR ACC TXV FAR SIDE NEAR & FAR FRONT VIEW RIGHT VIEW AIRFLOW REAR VIEW LEFT VIEW --- NOTES --- CP REAR VIEW Weight Range*: 18,400-24,500 lbs *weight varies depending on options selected. Contact factory for a selected unit weight. ALL DIMENSIONS ARE IN INCHES. CONDENTE DIN (CD) - 1" PVC - TP DEPTH 6" MIN. RECOMMENDED SERVICE CLEANCE - 4 FEET. MINIMUM DOOR SWING ALLOWANCE 31.0". FACTORY INHOODS ALLOWANCE SHOULD BE 48.0". ALL PIPING STUBOUT (PW,AC,HW) LOCATIONS APPROX. VFD 1 OF 7
180.3 28.0 OA 92.9 25.8 88.0 OA 108.49 22.9 2.76 SIDE AIR OPENINGS (LEFT VIEW) 2 OF 7
WATER CONNECTIONS TO BE LOCATED WITHIN PANEL SHOWN RIGHT SIDE VIEW (PIPING LOCATION) 3 OF 7
2.8 180.3 28.0 OA 87.2 31.58 A 95.5 88.0 OA 95.5 2.8 25.9 A 3.5 2.8 TOP VIEW 4 OF 7
2.8 4.3 2.9 339.8 CURB MAX. 2.9 A 92.5 & 95.5 CURB MAX. 4.4 37.5 A 44.9 BOTTOM VIEW / CURB POCKET 35.3 156.1 ACC SECTION 1.00 TYPICAL DEPTH OF CURB POCKET A GOOD DESIGN PCTICE MANDATES THAT CURBS BE PRESCRIBED & TOLENCED SUCH THAT THEY CANNOT REACH THE 'MAX.' DIMENSIONS LISTED HERE, TAKING FULL ADVANTAGE OF THE GENEROUS 1.50" WIDE PERIMETER CURB SURFACE PROVIDED. 1.50 TYPICAL WIDTH OF CURB SURFACE DETAIL A 5 OF 7
20.58 60.0 60.0 26.97 FRONT VIEW 6 OF 7
DATE REV. ECN# DR. CHK. DESCRIPTION 02/04/14 - DWH ORIGINATED 07MAY14 A 3400 CORRECTED -BTM/TOP & -BTM CON'N DIM'S (SHT.4&5) MPK UNIT REFERENCE CHART (INTERNAL USE) # Drawing Set Description Code (10 char max) MPK D - Cabinet 001 MS, NO IACC, NO AUX HEAT DS00NACNAH 002 MS, NO IACC, GAS FURNACE DS00NACGAS 003 MS, NO IACC, ELEC HEAT DS00NACELE 004 MS, IACC, NO AUX HEAT DS00IACNAH 005 MS, IACC, GAS FURNACE DS00IACGAS 006 DS00IACELE 007 MSE, NO IACC, NO AUX HEAT DSE0NACNAH 008 MSE, NO IACC, GAS FURNACE DSE0NACGAS 009 MSE, NO IACC, ELEC HEAT DSE0NACELE 010 MSE, IACC, NO AUX HEAT DSE0IACNAH 011 MSE, IACC, GAS FURNACE DSE0IACGAS 012 MSE, IACC, ELEC HEAT DSE0IACELE 013 MSEP, NO IACC, NO AUX HEAT DSEPNACNAH 014 MSEP, NO IACC, GAS FURNACE DSEPNACGAS 015 MSEP, NO IACC, ELEC HEAT DSEPNACELE 016 MSEP, IACC, NO AUX HEAT DSEPIACNAH 017 MSEP, IACC, GAS FURNACE DSEPIACGAS 018 MSEP, IACC, ELEC HEAT DSEPIACELE 019 Remote ACC, 3-CIRCUITS ACC3CKT 7 OF 7