PolyPro : For Venting Condensing Appliances Environmentally Safe Alternative Lower Over-All Cost Than PVC Engineered Terminations Fast, Easy To Install
Being Green, Being Responsible. DuraVent looks for feasible ways of doing business in an ecologically sound way. In manufacturing we use water based paints. Our reverse osmosis system recycles 90% of the water used in the paint line. We buy recycled metals for all our products when available, and recycle waste metals. Factory skylights reduces heavy load needs for electric lighting during daylight hours. In the office, paperless invoicing is now standard. Paperless communications to customers are sent via electronic newsletters or email, and we recycle office paper waste. Kaizen (Japanese for improvement ) refers to the practice of focusing on continuous improvement in manufacturing activities. By improving standardized activities and processes, Kaizen aims to eliminate waste. Since 1998, DuraVent has reduced manufacturing waste in its plant by 30% through Kaizen practices. DuraVent is a member of the US Green Building Council,(USGBC) a non-profit organization dedicated to sustainable building design and construction, and developers of the LEED building rating system.
PolyPro PolyPro For venting, DuraVent s PolyPro is the proven, healthy, environmentally safe alternative to PVC. Specifically designed for venting, it is also 100% recyclable, it contains no toxic or carcinogenic materials, such as chlorides, or heavy metals. Plus, it does not release hazardous gases during combustion. PolyPro has been used for venting throughout Europe for over fifteen years. PolyPro has a higher operating temperature than PVC of 248 F. No glues or solvents are needed at connections. For condensing gas fired appliances. ULC-S636 Listed. 3
Our History The M&G Group acquired Simpson DuraVent September 1, 2010. M&G DuraVent, Inc, a member of the M&G Group, is one of 13 companies in the privately held consortium. M&G (www.m-ggroup.com) was founded in 1932 and is headquartered in the Netherlands. The M&G Group produces a wide range of flue and vent products in aluminum, stainless steel and plastic. It is the largest supplier of engineered venting systems for the high-efficiency heating market in Europe. All M&G companies, including DuraVent, are 100% focused on developing, manufacturing and marketing only flue and ventilation systems. Since 1958, DuraVent has been a leading manufacturer of Gas Vent and Chimney products in the US. In 1982, DuraVent was purchased by Simpson Manufacturing. In 2008 DuraVent acquired both the Ventinox product line from America Boa, and ProTech Systems, the highly respected manufacturer of Hearth, HVAC and PHC products. With a broad range of engineered venting products, DuraVent has earned its reputation as the industry leader by offering innovative, safe, professional products for the HVAC and Hearth markets. M&G DuraVent is dedicated to one thing...focusing on the design and manufacture of venting products. As experts in this industry, our team is passionate about creating innovative, quality products. We invest in equipment with the latest technology to develop and test venting products that are engineered to one standard, excellence. All measuring equipment is calibrated to the same levels as used by testing agencies, and are compliant with ISO 17025, the test laboratory standard. Wind Tunnel Laboratory The wind tunnel lab allows us to gather precise data with 180 degrees of measurement on terminations. All data is anaylized for product performance under rigorous conditions before going to market. Appliance Testing M&G DuraVent offers appliance testing for OEM's. Rain Testing M&G labs test the vapor/moisture barrier of products by subjecting them to extreme rain and wind conditions. These tests are more stringent than required in the US and Canada. Climate Testing M&G labs have developed a patented ice testing system in the climate room. Tests run to -4 degrees F. PolyPro terminations are engineered to remain icicle free. OEM Product Development M&G DuraVent engineeers are expertly skilled to develop venting components to OEM specs. To satisfy specific venting requirements, DuraVent has the experience to provide custom design, prototyping and testing of vent systems and components engineered to the demands of specific appliances. 4 DuraVent www.duravent.com
PolyPro PolyPro is a polypropylene ULC-S636 Gas Vent - BH, Class II (248 F max) venting system for the North American continent. PolyPro is engineered for use with category II & IV condensing appliances, is corrosion resistant and utilizes gaskets that enable rapid and adhesive free assembly. Available in 2, 3, 4, 5, 6 and 8 diameters. PVC pipes are commonly used for venting water heaters, condensing boilers and warm air furnaces, yet PVC was never designed for such use. No other plastic contains or releases as many dangerous chemicals. It poses dangerous environmental health hazards in its manufacture, product life, and disposal. PVC is unfit for safe venting. An environmentally safe alternative is PolyPro, new to the U.S. and Canadian market by DuraVent, for condensing gas appliances. Engineered for venting, it is 100% recyclable, contains no toxic or carcinogenic materials, chlorides, or heavy metals, as found in PVC. It does not release hazardous gases during combustion, and has been used safely throughout Europe for over fifteen years. PolyPro has a higher operating temperature of 248degrees ( PVC is 149 degrees max). PolyPro is engineered with a corrosion-free, condensation management system. DuraVent s PolyPro is available for solutions requiring single-wall, concentric, manifold and other engineered uses. Terminations DuraVent s PolyPro terminations are lab tested to handle harsh weather and remain icicle free in freezing temperatures. Air circulation and weather conditions like rain, wind and ice have the potential to reduce the efficiency of a units performance and the operation of it's venting system. M&G DuraVent has designed its terminations for a tight, leak-free system that does not allow icicle formations. 800-835-4429 DuraVent 5
PolyPro Single Wall and Flex Specifications ULC S636 System Applications PolyPro is a polypropylene venting system for use with ULC-S636 Gas Vent - BH, Class II (248 F max) venting system for the North American continent. PolyPro is engineered for use with category II & IV condensing appliances and heating equipment, including tankless water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. Materials and Construction Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double wall polypropylene. EPDM or Viton gaskets. Diameters 2", 3", 4", 5", 6" and 8" Listings ULC-S636 Listed Warnock-Hersey Warranty 10 years ISO 9001 Registered by GasTec 6 DuraVent www.duravent.com
PolyPro Typical Installation, Single-Wall Typical Installation, Flex Skyline Vertical Termination Flashing Vent Length Elbow Support Bracket A polypropylene vent system for condensing appliances that offers superior environmental, performance, and installation advantages over PVC / CPVC. Environmental Advantages 100% recyclable. No leaching or off-gassing of heavy metals or carcinogens. Releases only oxygen and carbon dioxide when burned. Resistant to aromatic hydrocarbons generated by gas combustion. Resistant to acids and bases. No chlorides in PolyPro, unlike PVC. Performance Advantages: Ideal for all condensing appliances. ULC S636. Extra thick wall means it is more stable & secure. Tight seal at every joint...expands and contracts. with weather and temperature changes, so there is no flexing or cracking in the venting. Terminations remain icicle free in freezing weather. Interior of 90 elbows are 88 to prevent standing condensation. Higher sustained operating temperatures than PVC. Corrosion resistant. Installation Advantages: No flammable, messy or harmful glues, cements or solvents needed at connections. No wait for glue curing time during installation. Screws into studs for a sturdy and secure brace. Time saving wall bracket clips quickly and easily to PolyPro pipe. Lightweight and easy to install. Gasketed connections make easy removal and replacement of components. 800-835-4429 DuraVent 7
PolyPro Single-Wall Venting for Condensing Appliances Horizontal Termination Kit Use for horizontal terminations. White nose. Includes 2 appliance adapters, white wall plate, white firestop, ski boot. SIZE STOCK # A 2 2PPS-HK 13 3 3PPS-HK 13 4 4PPS-HK 13 MAX LENGTH A Vertical Termination Cap Kit A Use for vertical terminations. Includes 2 appliance adapters, ski boot. Choose black or terra-cotta cap. SIZE BLACK CAP TERRA-COTTA CAP A B 2 2PPS-VK 2PPS-VK-TC 18 50 1 4 3 3PPS-VK 3PPS-VK-TC 23 53 1 4 4 4PPS-VK 4PPS-VK-TC 23 68 1 4 B 8 DuraVent www.duravent.com
PolyPro Single-Wall Pipe Ø Use to vent condensing appliances, including gas-fueled condensing water heaters and high-efficiency warm air furnaces. Listed to ULC S636. LENGTH SIZE 12 36 72 2 2PPS-12 2PPS-36 2PPS-72 3 3PPS-12 3PPS-36 3PPS-72 4 4PPS-12 4PPS-36 4PPS-72 5 5PPS-12 5PPS-36 5PPS-72 6 6PPS-12 6PPS-36 6PPS-72 Adjustable Pipe Use to add length to straight length of PolyPro pipe. Slips over standard single-wall pipe length. 61 4 81 4 2 2PPS-AVL 5 5PPS-AVL 3 3PPS-AVL 6 6PPS-AVL 4 4PPS-AVL 8 8PPS-AVL SIZE 40 77 8 2PPS-40 2PPS-75 Test Port Ø Use to test for proper applaince operation without penetrating or disconnecting the vent wall. 10 2 2PPS-TP 5 5PPS-TP 3 3PPS-TP 6 6PPS-TP 4 4PPS-TP 8 8PPS-TP 800-835-4429 DuraVent 9
Appliance Adapter, PVC to PolyPro Use to connect rigid PolyPro pipe length to PVC on an appliance. SIZE STOCK # 2 2PPS-AD 3 3PPS-AD 4 4PPS-AD 45º Elbow Offsets obstructions as needed. A B SIZE STOCK # A B SIZE STOCK # A B 2 2PPS-E45 2 7 8 2 11 16 5 5PPS-E45 3 13 16 3 13 16 3 3PPS-E45 2 7 8 2 7 8 6 6PPS-E45 3 7 8 4 4 4PPS-E45 3 2 1 2 8 8PPS-E45 4 3 8 5 3 16 90º Elbow B Offsets obstructions as needed. A SIZE STOCK # A B SIZE STOCK # A B 2 2PPS-E90 4 4 5 5PPS-E90 6 11 16 6 3 3PPS-E90 4 5 16 4 5 16 6 6PPS-E90 7 6 1 2 4 4PPS-E90 4 1 2 4 1 2 8 8PPS-E90 9 7 11 16 Condensate Drain Use to properly manage corrosive condensates common with high efficiency gas appliances. A 87º SIZE STOCK # HEIGHT SIZE STOCK # HEIGHT 2 2PPS-CD 7 5 5PPS-CD 7 3 3PPS-CD 7 6 6PPS-CD 7 4 4PPS-CD 7 8 8PPS-CD 23 4 Tee with Cap Use for a 90 offset or to combine connections from two or more appliances into a common vent. SIZE STOCK # 2 2PPS-T 3 3PPS-T 4 4PPS-T 10 DuraVent www.duravent.com
PolyPro Tee Cap Drain Use instead of Tee Cap to manage condenstaes at the bottom of a vertical run. 2 2PPS-TCD 5 5PPS-TCD 3 3PPS-TCD 6 6PPS-TCD 4 4PPS-TCD 8 8PPS-TCD Increaser ØC ØB A Use to increase vent diameter. SIZE STOCK # A B C 2-3 2PPS-X3 4 5 16 2 3 3-4 3PPS-X4 4 5 16 3 4 4-5 4PPS-X5 4 5 16 4 5 5-6 5PPS-X6 4 5 16 5 6 6-8 5PPS-X8 5 5 16 6 8 Firestop Spacer Use when penetrating floor levels. Two pieces for ease of use. 2 2PPS-FS 5 5PPS-FS 3 3PPS-FS 6 6PPS-FS 4 4PPS-FS 8 8PPS-FS Wall Strap Use to support vertical and horizontal runs. PolyPro version for 2-4 diameter pipe. Aluminum strap for 5-8 diameter pipe. 2 2PPS-WS 5 5PPS-WS 3 3PPS-WS 6 6PPS-WS 4 4PPS-WS 8 8PPS-WS 800-835-4429 DuraVent 11
Flat Roof Flashing Use to weather proof penetration of vent through the roof. 2 2PPS-FF 5 5PPS-FF 3 3PPS-FF 6 6PPS-FF 4 4PPS-FF 8 8PPS-FF Adjustable Roof Flashing, Aluminum 0 º - 25º Use to weather proof penetration of vent through the roof. Made of aluminum. Adjusts from 0-25 (0/12 to 5/12). SIZE STOCK # 2 2PPS-F5 3 3PPS-F5 4 4PPS-F5 Adjustable Roof Flashing, Polypropylene 25º - 45º Use to weather proof penetration of vent through the roof. Made of polypropylene. Adjusts from 25 to 45 (6/12 to 12/12). SIZE STOCK # 2 2PPS-F12 3 3PPS-F12 4 4PPS-F12 EPDM Replacement Gasket Use as a replacement gasket for rigid PolyPro products. 2 2PPS-GA 5 5PPS-GA 3 3PPS-GA 6 6PPS-GA 4 4PPS-GA 8 8PPS-GA 12 DuraVent www.duravent.com
PolyPro Viton Replacement Gasket for Condensing Oil Appliances Use as a replacement gasket when using PolyPro products with condensing oil appliances. SIZE STOCK # 2 2PPS-GAV 3 3PPS-GAV 4 4PPS-GAV Locking Band Use to secure two pieces of pipe together. Required to comply with ULC-S636 listing. SIZE STOCK # 2 2PPS-LB 3 3PPS-LB 4 4PPS-LB 800-835-4429 DuraVent 13
PolyPro Flex Venting for Condensing Appliances Flex Chimney Lining Kit Use for a vertical flex lining system. Includes chimney cap, rigid flue vent, support brackets, flex connector, support elbow, wall plate and appliance adapter. Flex sold seperately. 2 2PPS-FK 4 4PPS-FK 3 3PPS-FK 5 5PPS-FK Flex Length Use to line masonry chimneys that vent condensing appliances. Double-wall construction. Standard sizes with custom lengths available. Can be cut to length. SIZE STOCK # LENGTH SIZE STOCK # LENGTH 2 2PPS-100F 100FEET 4 4PPS-100F 100FEET 3 3PPS-100F 100FEET 5 5PPS-100F 100FEET Chimney Cap Use to vertically terminate a flex system. 2 2PPS-FCT 4 4PPS-FCT 3 3PPS-FCT 5 5PPS-FCT 14 DuraVent www.duravent.com
PolyPro Flex Male Adapter Use to connect PolyPro rigid pipe to PolyPro flex at the base of the system. 2 2PPS-FAM 4 4PPS-FAM 3 3PPS-FAM 5 5PPS-FAM Flex Female Adapter Use to terminate PolyPro flex lining system back to a rigid system. 2 2PPS-FAF 4 4PPS-FAF 3 3PPS-FAF 5 5PPS-FAF Flex Coupler Adapter Use to tightly connect one length of PolyPro flex to another. 2 2PPS-FAC 4 4PPS-FAC 3 3PPS-FAC 5 5PPS-FAC Support Bracket Use to support PolyPro Flex from top of masonry chimney. 2 2PPS-FSB 4 4PPS-FSB 3 3PPS-FSB 5 5PPS-FSB Spacer Use to center PolyPro flex. Universal for all diameters. Simple installation and ratchet adjustment. 2 2PPS-S 4 4PPS-S 3 3PPS-S 5 5PPS-S 800-835-4429 DuraVent 15
Support Elbow, Extended A Use the extended support elbow to stabilize the vertical termination. Extended horizontal length can be trimmed to size. Includes supporting assembly and mounting channel. SIZE STOCK # A SIZE STOCK # A 2 2PPS-SE90X 21 11 16 4 4PPS-SE90X 22 7 16 3 3PPS-SE90X 22 ¼ 5 5PPS-SE90X 24 7 16 Chimney Support Use to support flex liner system against a masonry wall. 2 2PPS-SUP 4 4PPS-SUP 3 3PPS-SUP 5 5PPS-SUP Wall Plate Use to trim wall penetration. White. 2 2PPS-WP 4 4PPS-WP 3 3PPS-WP 5 5PPS-WP Viton Replacement Gasket, Flex Use as a replacement gasket for PolyPro flex products. 2 2PPS-GAF 4 4PPS-GAF 3 3PPS-GAF 5 5PPS-GAF Flex Puller Use with the provided rope to guide PolyPro flex lengths down masonry chimney. 2 2PPS-FP 4 4PPS-FP 3 3PPS-FP 5 5PPS-FP 16 DuraVent www.duravent.com
PolyPro Additional PolyPro products and components may be available since this catalog was published. Contact DuraVent's customer service department. 1-800-835-4429 for more information. 800-835-4429 DuraVent 17
PolyPro Concentric Specifications Applications Concentric venting system for use with ULC-S636 Gas Vent - BH, Class II (248 F max) venting system for the North American continent. PolyPro is engineered for use with category II & IV condensing appliances and heating equipment, including tankless water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. Advantages of Concentric A concentric (or direct-vent, or two-pipe) system maintains indoor air quality by reducing drafts with one penetration, and allows for better humidity level control inside a dwelling. Concentric venting brings to the heating appliance outdoor air as combustion air through an air-tight, sealed system that is safe. Materials and Construction Inner pipe a minimum of 2.2mm thick polypropylene pipe. Exterior pipe made of galvalume. Diameters 3" inner with 5" outer wall. Listings ULC-S636 Warnock-Hersey 18 DuraVent www.duravent.com.com
PolyPro Typical Installation, Concentric Skyline Vertical Termination Flashing PolyPro Concentric... DuraVent's concentric vent systems incorporate a PolyPro inner with a metal outer. All the advantages of a polypropylene inner encased in a strong, galvalume outer pipe. Available as 3"x5". Elbow Concentric Vent Length The Concentric System includes: Lengths Elbows Horizontal Termination Vertical Termination Concentric Appliance Adapter 800-835-4429 DuraVent 19
M&G DuraVent, Inc. PO Box 1510 Vacaville, CA 95696-1510 800-835-4429 Fax: 707-446-4740 www.duravent.com 'LEED' and USGBC logo is a trademark owned by the U.S. Green Building Council and is used by permission. This catalog is made from recycled materials. Please remember to recycle. L275 1/2011 2011 M&G DuraVent, Inc. PolyPro is one of M&G DuraVent s GreenVent line of products.