QUIKSTRT BR/BD 0/ EP, Bp Start up Warning These are only rief instructions! Please read and comply with these instructions prior to using or servicing your appliance. The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers for the operator and other persons. Estalish mains contact. Unplug the charger from the mains. B Place the mains cale into the storage compartment. B D Open the cover. Fill in the water up to the MX marking of the filling level display. Maximum temperature of the liquid 60. Pour in detergent. lose the lid.
QUIKSTRT Operation Starting the machine Turn the programme selector switch to a cleaning programme B Press control switch. leaning Programs Normal mode Wet clean the floor and vacuum up dirt water. B Intense mode Wet clean the floor and allow the detergent to react. Vacuum mode Vacuum the wastewater. D Polishing mode Polishing the floor without the application of liquid. Setting the water quantity djust the water quantity using the regulating utton according to the dirt on the floor covering. Swivel in the transport roller. Swivel the transport roller in via the foot pedal. Lower the vacuum ar Lower the lever for lowering the vacuum ar downwards; the vacuum ar is lowered. 6 Setting the dvance Speed (BD cleaning head only) Set the advance speed. Increase the advance drive: Turn the utton in "+" direction. Decrease the advance drive: Turn the utton in " " direction.
QUIKSTRT Finish operation E F Turn off the appliance lose the regulatory utton for setting the water quantity. B Release the control handle. Pull suction ar lowering lever upwards. D Turn the program selection switch to "OFF". E Swivel the transport roller out via the foot pedal. F Disconnect the mains connection cale. Emptying the Dirt Water Reservoir 몇 Warning Please oserve the local provisions regarding the wastewater treatment. Take the water discharge hose from the support and lower aove a suited collection device. B Rinse the dirt water tank with clear water. Take the water discharge hose from the support and lower aove a suited collection device. Leave the cover open to let it dry. Emptying the Fresh Water Tank 몇 Warning Please oserve the local provisions regarding the wastewater treatment. Remove the suction hose coupling for draining off the fresh water and hold it over a suitale container. harging attery harge attery, if required. Insert the plug of the connecting cale into the socket.
QUIKSTRT Maintenance and care daily monthly Kärcher ustomer Service Warning Please oserve the local provisions regarding the wastewater treatment. Take the water discharge hose from the support and lower aove a suited collection device. B Rinse the dirt water tank with clear water. Take the water discharge hose from the support and lower aove a suited collection device. Leave the cover open to let it dry. Remove the suction hose coupling for draining off the fresh water and hold it over a suitale container. Rinse the fresh water tank with clear water. heck the fluff filter, clean if required lean the vacuum lips on the vacuum ar, turn or replace if required B lean the suction channel. 6 lean the seals etween dirt water reservoir and cover and check for tightness, replace if required. 7 Every 00 operating hours Every 600 operating hours Every 800 operating hours
QUIKSTRT Trouleshooting ppliance cannot e started Estalish mains contact. Please watch attery indicator. harge the attery if required. E Insufficient vacuum performance lean the seals etween dirt water reservoir and cover and check for tightness, replace if required. B lean the vacuum lips on the vacuum ar, turn or replace if required heck suction hose for lockages; clean if required. heck connection etween suction hose and suction ar and suction hose and wastewater tank. D heck the fluff filter, clean if required E heck the setting of the vacuum ar. F heck if the cover on the dirt water discharge hose is closed Insufficient cleaning result heck rush for wear and tear and clean it. heck the rushes for wear (ristle length at least 0 mm), replace if required. Insufficient water quantity heck fresh water level, refill tank if necessary. B djust the water quantity using the regulating utton according to the dirt on the floor covering. Brushes do not turn heck the rushes for lockage due to foreign particles, remove them if found.