General information BB0113
BB0113
General information 3 Cost guide This cost guide contains all the prices of our roller shade and butterfly blinds collection books. It will help you quote your customers when ordering your custom made window treatment. Please consult the provided measuring guide for some helpful measuring tips. To help you collect all required information while visiting your customer and not having access to the online order system, we have added an order form that you can use as a template. For more information, questions, or suggestions, please email budgetblinds@morestextiles.com and we will put our best effort into helping you. Cost guide instructions If you have internet access, go to http://budgetblinds.bece.com, enter the required information and you will be able to order the products online. If you do not have internet access, we recommend using the following steps: Measure the window according to the measuring guide, is found under the tab measuring and ordering Enter the information on the order form Find the price of the window treatment on the appropriate price sheet. Be aware that surcharges could be applicable to your order Place the order online using your credentials. If you have any questions, or need more information, please contact our North American customer service (Mores custom made textiles). Email: budgetblinds@morestextiles.com Tel: (866) 930 MORE (6673) Fax: (866) 517-3007
Limited lifetime warranty This Limited Warranty program is available to consumers who purchase bece products through participating Budget Blinds retail franchisees. COVERED All internal mechanisms Components and brackets Operational cords are covered for 24 months from the date of purchase Motorization components are covered for 5 years from date of production, excluding battery wands LIMITED LIFETIME WARRANTY NOT COVERED This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning for maintenance. Normal wear and tear are not covered by the limited lifetime warranty. All materials can lose original color intensity or discolor after long exposure to the sun. When left for extended periods in direct sunlight, some materials may yellow or crack. Some materials may warp in high humidity areas. All cords will eventually wear out. The manufacturer considers these things normal wear and tear and are not covered by this warranty. Shipping charges, costs of removal and reinstallation. bece shall have no liability whatsoever for incidental or consequential damages or for any other direct or indirect damage, cost, expense or fee. Dye lots vary within industry acceptable tolerances. Color of fabrics, woods and natural products may vary from samples and may not match previous purchases. Dye lot variations are not covered by warranty. TO RECEIVE WARRANTY SERVICE, PLEASE: 1. Contact our customer service department through our North American distributor Mores Custom Made Textiles. by dialing (866) 930-6673 and advise them of the nature of the issue. Mores custom made textiles will provide you with information as to how to proceed. 2. Please remember, product returned for warranty claims must be accompanies by the original sales receipt as well as written details regarding the nature of the problem, location of the shade/blind etc. 3. If damage occurred during shipping, call (866) 930-6673 immediately or at least within 7 calendar days or else you may be denied credit for your damaged product. This warranty does not imply automatic replacement of the product bece reserves the right to replace or repair any product at our discretion. Maintenance instructions: the products can be easily feather dusted. Additionally, roller shades can be cleaned using a damp cloth. THIS LIMITED WARRANTY DOES NOT COVER, AND IS INTENDED TO EXCLUDE, ANY AND ALL LIABILLITY ON THE PART OF THE MANUFACTURER, WHETHER UNDER THIS LIMITED WARRANTY OR UNDER ANY WARRANTY IMPLIED BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH HEREOF OR THEREOF, EXCEPT AS EXPRESSLY PROVIDED ABOVE IN THIS LIMITED LIFETIME WARRENTY, THE COMPANY HEREBY NEGATES AND DISCLAIMS ALL EXPRESS WARRANTIES. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the foregoing limitation or exclusion regarding such damages may not apply to you. Also, this Limited Warranty gives specific legal rights, and you may also have other rights which vary from state to state.
BB0113
BB0113
Measuring/ordering 7 Features and benefits Features Fabrics Styles Chain operation Cordless operating system Benefits 384 fabrics ranging from sheer to room darkening, from colored solids to beautiful jacquard weaves Extraordinary fabrics, like denim fabric and fabric suitable for chalk Choose a roller shade from one of the fashion trends; Poetry, Heritage, Color Blocking or Denim Optional: design the shade to your personal taste for optimum customization Beaded chain and clutch system make raising and lowering shade easy Three clutch sizes depending on shade size Child safety guide included Choose left or right chain location Optional cassette valance comes in white, aluminium and fabric wrapped. Maximum room darkening is possible with optional side tracks Sleek look with no chains, perfect safety solution for homes with children or pets Window screen Options Two fabrics are combined onto one shade for privacy and bug prevention The fabric and window screen can be controlled separately Turning fabric for to accommodate wider windows (not available with all fabrics) Extension brackets Clip on brackets Reverse roll Choose which way the fabric rolls on the tube to the back (standard) or to the front (no charge) Color coordination: standard options for the components can be found in the collection overview Optional is to select a color: white, stainless, charcoal, off-white, black make a standard roller shade fabric into a skylight shade (exceptions apply) Make a standard roller shade inside a casing for vinyl and aluminum frames (exceptions apply) Select the design system to modernize the look and feel of your shade. It is made from brushed and polished stainless steel Motorization Scalloped edges with braid trim, 25 different yarn colors and four different stitch choices and decorative cords Optional cassette valance comes in white, aluminium and fabric wrapped. Pre mounting proile for easy installation
Measuring/ordering 9 OuTSIdE MOunT windows determine above or on-moulding installation Instructions for above moulding installation roller shade casing moulding sill 3" 3" including overlap of sill to top of sill 1. Measure : measure to be covered. we recommend 3 overlap on each side (6 total) for optimum light control and privacy. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill or lower if overlap is desired for light control and privacy. If overlap is desired please check the of the window sill to ensureit does not block the roller shade. Otherwise, measure to the top of sill. Record measurement. Note: bece will take no deductions on outside-mount installations Instructions for on-moulding installation roller shade casing moulding sill 1. Measure : measure to be covered. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill. Record measurement. Note: bece will take no deductions on outside-mount installations.
Measuring/ordering 10 roller shades with headrail cassette and side guides The following instructions apply for the small headrail cassette (HC1), medium headrail cassette( HC2), large headrail cassette (HC3), and the roller shade with window screen (HC5). InSIdE MOunT windows headrail cassette side guide casing moulding sill depth 1. Measure depth: inside mount shades are installed inside the window casing. See page 16 and 18 for system dimensions. 2. Measure : measure the inside at three different points of the window casing. Record the narrowest measurement. 3. Measure : measure the inside from the top of window casing to top of sill. Record the shortest measurement.
Measuring/ordering 11 OuTSIdE MOunT windows determine above or on-moulding installation Instructions for above moulding installation: headrail cassette side guide casing 3" 3" moulding sill 1. Measure : measure to be covered. we recommend 3 overlap on each side (6 total) for optimum light control and privacy. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill. Note: bece will take no deductions on outside-mount installations. Instructions for on-moulding installation headrail cassette side guide casing moulding sill 1. Measure : measure to be covered. we recommend 3 overlap on each side (6 total) for optimum light control and privacy. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill. Note: bece will take no deductions on outside-mount installations.
ROllER SHAdE FOR vinyl And AluMInuM FRAMES The following instructions apply for the roller shade for vinyl and aluminum window frames (HC4). This model can only be inside mounted. moulding casing glass glass rubber depth 1. Measure depth: inside mount shades are installed inside the window casing. Measure depth from glass to moulding of the window. See page 17 for minimum and maximum dimensions. 2. Measure : measure the inside at three different points of the window casing from the inside end of the glass rubber. Record the narrowest measurement. 3. Measure : measure the inside from the top of window casing to top of sill. Record the shortest measurement.
Measuring/ordering 13 The following instructions apply for skylights. InSIdE MOunT SkylIgHT FRAME d1 Skylight model is unknown. The moulding and the casing need to be perpendicular. skylight frame depth moulding pitched roof side guide casing wall 1. Measure depth: inside mount shades are installed inside the window casing. See page 20 for system dimensions. 2. Measure : measure the inside at three different points of the window casing. Record the narrowest measurement. 3. Measure : measure the inside at three different points of the window casing. Record the narrowest measurement.
Measuring/ordering 14 Skylight model known Indicate brand, type and number of the skylight window on the order form. no need to indicate measurement as the dimensions are known to us. OuTSIdE MOunT SkylIgHT FRAME d2 casing skylight frame pitched roof moulding side guide 3" 3" 3" 3" wall 1. Measure : measure to be covered. we recommend 3" overlap on each side (6" total) for optimum light control and privacy. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill. we recommend 3 overlap on each side (6 total) for optimum light control and privacy. Record measurement. Note: bece will take no deductions on outside-mount installations. velux SkylIgHT FRAME d3 Indicate brand, type and number of the skylight window on the order form. No need to indicate measurement as the dimensions are known to us. This is a complete skylight casing with side guides and fabric.
Measuring/ordering 15 Small system Ø 1 " Medium system Ø 1½" Large system Ø 1 "/2" Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum (inch) Light cap (inch) Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum (inch) Light cap (inch) Standard Option Minimum (inch) Operation Minimum (inch) Position Maximum (inch) Application Maximum (inch) Light cap (inch) Chain operation 13¾ 11¾ * * ¾ 13¾ 11¾ * * ¾ 13¾ 11¾ 120 157½ 1 Cordless 21 11¾ * * ¾ 21 11¾ * * ¾ Motorization (12V) 13¾ 11¾ * * ¾ Motorization (110V) 23 11¾ 120 157½ 1 Outside mount Inside mount Pre mounting profile 13¾ 11¾ * * ¾ 13¾ 11¾ * * ¾ 13¾ 11¾ 120 157½ 1 Tension wires Clip-on brackets Extension brackets Finished edge Color of components white, aluminum, charcoal gray, offwhite, black white, aluminum, charcoal gray, offwhite, black white, aluminum, charcoal gray, offwhite, black Wall mount dimensions 2¾ Ceiling mount dimensions 3⅜ 3 Speciications standard windows 1½ 2⅛ 2⅛ 3⅜ 2⅛ 2½ 3½ 3½ 2⅜
Small headrail cassette - HC1 Medium headrail cassette - HC2 Large headrail cassette - HC3 Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum H1 fabric (inch) Maximum H2 fabric (inch) Maximum H3 fabric (inch) Maximum H4 fabric (inch) Light cap (inch) Standard Option Minimum (inch) Minimum (inch) Application Position Operation Maximum (inch) Maximum H1 fabric (inch) Maximum H2 fabric (inch) Maximum H3 fabric (inch) Maximum H4 fabric (inch) Light cap (inch) Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum (inch) Light cap (inch) Chain operation 13¾ 11¾ *** 63** 70 ** 86½** 117** 13¾ 11¾ **** 78¾** 86½** 114 ** 120** ¾ 13¾ 11¾ 120 156 1 Cordless 21 11¾ *** 63** 70 ** 86½** 117** 21 11¾ **** 78¾** 86½** 114 ** 120** ¾ Motorization (12V) 13¾ 11¾ **** 78¾** 86½** 114 ** 120** ¾ Motorization (110V) 23 5 /8 11¾ 120 156 1 Outside mount Inside mount Pre mounting profile Tension wires Clip-on brackets Extension brackets Finished edge Side guides Color of components white,aluminum or fabric wrapped white,aluminum or fabric wrapped white,aluminum or fabric wrapped 2¾ 5 ¼ 2¼ 2¼ 3 4 ½ ⅝ 3¾ 3 2¼ Side view dimensions Ceiling mount Wall mount 2¼ 2¼ 3 4½ 4¾ 3 2⅛ 3 Side view with side guide dimensions ⅝ Ceiling mount ⅝ Wall mount 1 1¾ Front view with side guide dimensions 1½ 1¾ 2¾ ** Make sure that the and are within specifications *** The size limitations of the small system are applicable here. **** The size limitations of the medium system are applicable here.
Measuring/ordering 17 Roller shade for vinyl and aluminum frames - HC4 Standard Choice Minimum (inch) Minimum (inch) Maximum (inch) Maximum fabric H1 (inch) Maximum fabric H2 (inch) Maximum fabric H3 (inch) Maximum fabric H4 (inch) Light cap (inch) Operation Minimum glass casing (inch) Maximum glass casing (inch) Handle set 15¾ 11¾ 63 35 63 67 71 0 ½ 1 Position Outside mount Inside mount * Color of components white ¾ 1⅝ ½ Front view dimensions Side view dimensions 1¾ 4 1½ 1½ * Inside mount possible only for vinyl or aluminum frames fitted with a glass rubber. Please indicate the frame depth on the order form.
Roller shade with window screen - HC5 Standard Choice Minimum (inch) Minimum (inch) Maximum (inch) Maximum fabric H1 (inch) Operation Maximum fabric H2 (inch) Maximum fabric H3 (inch) Maximum fabric H4 (inch) Light cap (inch) Chain operation 17 11¾ 55 47¼ 55 63 71 0 Position Outside mount Inside mount Window screen fabric color Component colors gray white or aluminum Front view dimensions Side view dimensions Please indicate outside or inside mount on the order form.
Measuring/ordering 19 design system Standard Choice Operation Minimum (inch) Position Minimum (inch) Maximum Ø 32 Maximum Ø 43 Maximum Light cap (inch) Chain operation 13¾ 11¾ * ** 118 ¾ Motorization Outside mount Inside mount 1½ 7⅜ Wall mount dimensions 4⅝ Ceiling mount dimensions 4⅝ 4⅛ 2 4Model Small headrail cassette HC1 Medium headrail cassette HC2 Large headrail cassette HC3 Roller shade for vinyl and aluminum frames HC4 Roller shade with window screen HC5 4Headrail cassette up to 63" up to 71" up to 86" up to 114" up to 78" up to 86" up to 114" up to 118" up to 157" up to157" up to157" up to 157" up to 55" up to 63" up to 67" up to 71" up to 47" up to 55" up to 63" up to 71" Table of headrail cassette s 6⅛ * See medium table on the small- and medium system pricelist. ** See large table on the small- and medium system pricelist.
Speciications skylight windows Inside mount skylight frame - d1 Outside mount skylight frame - d2 velux skylight frame - d3 Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum (inch) Application Position Operation Light cap (inch) Minimum frame depth (inch) Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum (inch) Light cap (inch) Standard Option Minimum (inch) Minimum (inch) Maximum (inch) Maximum (inch) Light cap (inch) Minimum frame depth (inch) Operation profile 13¾ 11¾ 59 59 0 1¾ 21 11¾ 59 59 0 * 0 Handle set Operation rod Outside mount Inside mount Velux * Rooflite * Fakro * Other skylights Maximum angle of inclination 45 45 45 Color of components aluminum white or aluminum aluminum 2¼ 2⅛ Wall mount dimensions ¾ Front view dimensions 1⅝ * Indicate your window model and type, or see the pricelist for the most common designs.
Ordering instructions Measuring/ordering 21 roller shades STEP 1 name OF THE CuSTOMER Fill out the name of the costumer/location of the window here customer name 1 2 3 4 5 customer name STEP 2 QuAnTITy determine the number of products that are exactly similar to each other. qty STEP 3 COlOR number determine the color number using the information label on the back of the sample, e.g. d3300. color number STEP 4 width Round to the nearest 1/8. Check the measurement guide for instructions. in inch STEP 5 HEIgHT Round to the nearest 1/8. Check the measurement guide for instructions. in inch STEP 6 MOunTIng Indicate inside or outside mount on the order form. Please consult the measurement guide for further information on light gap and deductions. inside mount mounting outside mount
Butterfly blinds BB0113
BB0113
Measuring/ordering 27 Features and benefits Butterfly blinds Features Fabrics Slats Chain operation Maintenance 28 light iltering fabrics in many different colors Benefits The 2 slats can be unfolded to resemble a pleated shade. When the slats are closed, the butterly blind looks like a regular horizontal blind Beaded chain and clutch system make raising and lowering shade easy Customized chain lengths available Tilt cord to unfold and fold slats Child safety guide included Choose left or right chain and tilt cord location Easy installation by simply clicking system into mounting brackets Suitable for inside and outside mount installation Butterly blinds can be easily feather dusted
Measuring instructions butterfly blinds Tips and tools Steel tape measure do not use a cloth measuring tape Measure each window and identify window locations - size variances are common Round measurements to the nearest 1/8 Make sure the space where the product will be placed is clear from obstacles Regular systems and headrail cassettes The following instructions apply for the butterfly blinds Please be aware that for inside mount installations light gaps will occur. For optimal light and glare control, outside mount is recommended. See page 31 for speciications on light gaps. InSIdE MOunT windows Instructions for above moulding installation butterfly blind casing moulding sill depth 1. Measure depth: inside mount shades are installed inside the window casing. See page 31 for system dimensions. 2. Measure : measure the inside at the top of the window casing. Record measurement. 3. Measure : measure the inside from the top of window casing to top of sill. Record measurement. Note: do not take any deductions for clearance. bece will take necessary deductions for an inside mount.
Measuring/ordering 29 OuTSIdE MOunT windows determine above or on-moulding installation Instructions for above moulding installation: butterfly blind casing moulding sill 3" 3" including overlap of sill to top of sill 1. Measure : measure to be covered. we recommend 3 overlap on each side (6 total) for optimum light control and privacy. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill or lower if overlap is desired for light control and privacy. If overlap is desired please check the of the window sill to ensure it does not block the butterly blind. Otherwise, measure to the top of sill. Record measurement. Note: bece will take no deductions on outside-mount installations.
Instructions for on-moulding installation butterfly blind casing moulding sill 1. Measure : measure to be covered. Record measurement. 2. Measure : measure to be covered from top of headrail location to top of sill. Record measurement. Note: bece will take no deductions on outside-mount installations.
Measuring/ordering 31 Butterfly blinds Control 2" H Speciications butterfly blinds 3" Control Control side tilt cord/chain l/r/crosswise Width (inch) Height (inch) Minimum 15 ¾" Maximum 120 Minimum 15 ¾ Maximum 104 Measures Surface (square inches) Maximum Blind 39" 88 ¾ 7 Blind 59" 9 ¾ Height of slat pack (inch) Blind 79" 12 " Blind 99" 15 " Blind 119" 17 ½"
Ordering instructions butterfly blinds STEP 1 name OF THE COnSuMER Fill out the name of the consumer/location of the window here customer name 1 2 3 4 5 STEP 2 QuAnTITy determine the number of products that are exactly similar to each other. qty STEP 3 COlOR number determine the color number using the information label on the back of the sample, e.g. A001. color number STEP 4 width Round to the nearest 1/8. Check the measurement guide for instructions. in inch STEP 5 HEIgHT Round to the nearest 1/8. Check the measurement guide for instructions. in inch STEP 6. STEP 7 MOunTIng Indicate inside or outside mount on the order form. Please consult the measurement guide for further information on light gap and deductions OpERATIOn Indicate whether you would like the operation chain and tilt cord to be placed left, right or crosswise. when the butterly blind is narrower than 24 the operation chain will be places at the location indicated on the order form and the tilt cord will standard be placed at the opposite side from the chain. in inch inside mount mounting outside mount operation chain left right co
33 Prices roller shades BB0113