PUBLIC AUCTION Automotive Part Injection Molding Facility Plant Cloed ENGINEERED PLASTIC COMPONENTS 300 Shellhoue Drive Rantoul, Illinoi 61866 THEATER STYLE AUCTION: Thurday, July 13 10:00 am CDT to be held at: The Linden 224 Wheat Avenue, Rantoul, IL INSPECTION: Wedneday, July 12 9:00 am - 4:00 pm CDT at the plant location 300 Shellhoue Drive Rantoul, Illinoi 61866 Injection Molding Machine Granulator Rein Equipment Cooling Water Equipment Crane Forklift Die Flipper Burn-off Furnace Paint Kitchen Finihing Equipment Air Compreor Inpection Equipment Crib Storage Repair Part Scrap MORE! 105 Revere Drive, Suite C Northbrook, Illinoi 60062 Phone: 224.927.5320 ale@pplauction.com www.pplauction.com BID ONSITE or ONLINE AT Buyer Premium 15% Onite, 18% Online PPL Licene No. 444.000322 David Mulin Licene No. 441.001650 Joel Berh Licene No. 441.000826 Michael L. Ackerman Licene No. 440.000539
(6) Cincinnati Milacron 3000 Ton Molding Machine HPM 1650 Ton Molding Machine INJECTION MOLDING MACHINES Cincinnati Milacron 3000 Ton, 362 oz. Platic Injection Molding Machine Model VL3000-362, S/N 3926A01/91-6 (1991), 119 x 99 Platen, 84 x 64 Between Tie Bar, Allen Bradley Pro-Set 700 PLC Control (#101) Cincinnati Milacron 3000 Ton, 362 oz. Platic Injection Molding Machine Model VL3000-125MM, S/N 3926A01/92-2 (1992), 119 x 99 Platen, 84 x 64 Between Tie Bar, No Control (#102) Cincinnati Milacron 3000 Ton, 362 oz. Platic Injection Molding Machine Model VL3000-362, S/N 3926A01/92-7 (1992), 119 x 99 Platen, 84 x 64 Between Tie Bar, No Control (#104) Cincinnati Milacron 3000 Ton, 288 oz. Platic Injection Molding Machine Model VL3000-288, S/N 3926A01/92-9 (1992), 119 x 99 Platen, 84 x 64 Between Tie Bar, Ber Power Panel PLC Control (#105) Cincinnati Milacron 3000 Ton, 288 oz. Platic Injection Molding Machine Model VL3000-288, S/N 3926A21/93-5 (1993), 119 x 99 Platen, 84 x 64 Between Tie Bar, Ber Power Panel PLC Control (#106) Cincinnati Milacron 3000 Ton, 288 oz. Platic Injection Molding Machine Model VL3000-288, S/N H26A0193002 (1993), 119 x 99 Platen, 84 x 64 Between Tie Bar, Sepro Model 1882 Robot, Camac VEL Control (#107) HPM 1650 Ton, 260 oz. Platic Injection Molding Machine Model H1650WP-260, S/N 96380 (1997), 98.3 x 79.5 Platen, 72.8 x 53.8 Between Tie Bar, AEC Model 2635 Robot, HPM Command 9000 Control (#127) 2 PPL Auction Phone: 224.927.5320 www.pplauction.com
Van Dorn 1500 Ton Van Dorn Caliber Serie 1430 Ton Van Dorn Caliber Serie 1100 Ton (2) Van Dorn 1000 Ton INJECTION MOLDING MACHINES Van Dorn 1500 Ton, 165 oz. Platic Injection Molding Machine Model 1500HP1650277, S/N 277 (1998), 76 x 76 Platen, 52 x 52 Between Tie Bar, No Control (#130) Van Dorn Caliber Serie 1430 Ton, 165 oz. Platic Injection Molding Machine Model 1430CA165001, S/N 1 (1999), 83.1 x 74 Platen, 61.8 x 51.2 Between Tie Bar, Wittman Robot, Pathfinder 5000 Control (#131) Van Dorn Caliber Serie 1100 Ton, 139 oz. Platic Injection Molding Machine Model 1100CC68000124, S/N 124 (2000), 68.9 x 59.1 Platen, 55.1 x 45.3 Between Tie Bar, Wittman Robot, Pathfinder 5000 Control (#126) Van Dorn 1000 Ton, 165 oz. Platic Injection Molding Machine Model 1000RS165FVBLPVV, S/N 184 (1985), ATTEND or BID ONLINE at 73 x 65 Platen, 52 x 44 Between Tie Bar, Wittman Robot, Plant Star Control (#116) Van Dorn 1000 Ton, 125 oz. Platic Injection Molding Machine Model 1000HRS125FXLP, S/N 377 (1993), 65 x 65 Platen, 44 x 44 Between Tie Bar, Wittman Robot, Pathfinder Control (#203-17) PPL Auction Phone: 224.927.5320 www.pplauction.com 3
Van Dorn 730 Ton Van Dorn 500 Ton Tohiba 500 Ton Van Dorn 275 Ton Cincinnati 120 Ton INJECTION MOLDING MACHINES Van Dorn 730 Ton, 89.6 oz. Platic Injection Molding Machine Model 730HP4300-0038, S/N 0038 (2000), 60 x 58 Platen, 42.5 x 39.5 Between Tie Bar, Wittman Robot, Pathfinder 3000 Control Van Dorn 500 Ton, 89.6 oz. Platic Injection Molding Machine Model 500HT4300-0533, S/N 533 (1998), 47.8 x 47.8 Platen, 32.5 x 32.5 Between Tie Bar, Wittman Robot, Pathfinder 5000 Control (#123) Tohiba 500 Ton, 63 oz. Platic Injection Molding Machine Model 1SG500V10-34, S/N 952205 (1999), 48.43 x 45.67 Platen, 34.25 x 31.89 Between Tie Bar, Wittman Robot, Injectvior V10 Control (#121) Cincinnati Milacron Vita VT 440 440 Ton, 54 oz. Platic Injection Molding Machine Model VT440-54, S/N T39A0398053 (1999), 39.4 x 39.4 Platen, 28.9 x 28.9 Between Tie Bar, Camac 486C Control (#120) Tohiba 390 Ton, 40.9 oz. Platic Injection Molding Machine Model 1SGS390V10-19, S/N 89503 (2000), 40.2 x 40.2 Platen, 28.7 x 28.7 Between Tie Bar, Wittman Model W621-W633 Robot, Injectvior V10 Control (#119) Van Dorn 275 Ton, 30 oz. Platic Injection Molding Machine Model 275H30FLP, S/N 161 (1994), 34 x 34 Platen, 23 x 23 Between Tie Bar, AEC Robot, Pathfinder 5000 Control (#132) Van Dorn 230 Ton, 25.4 oz. Platic Injection Molding Machine Model 230HT1220-1292, S/N 1292 (2000), 32 x 32 Platen, 22 x 22 Between Tie Bar, Pathfinder 3000 Control (#118) Cincinnati Milacron Sentry 120 Ton, 7.6 oz. Platic Injection Molding Machine Model VS120-7.6, S/N S90A0499016, 26.5 x 26.5 Platen, 17 x 17 Between Tie Bar, Ranger Robot, Camac VSX Control (2) Aorted Wittman Robot GRANULATORS Conair 24 x 36, 100 HP Granulator Model CK-2436, S/N 10620, in Sound Houing, w/ Power Belt Feed Conveyor, Dut Sytem, Vacuum Pump (2) Aorted AEC 30 HP & 40 HP Portable Granulator Nelmor 25 HP Portable Granulator, in Sound Houing (3) Nelmor 20 HP & 30 HP (et.) Portable Granulator (3) Maverick 5 HP & 15 HP Portable Granulator Nelmor 5 HP Portable Granulator 4 PPL Auction Phone: 224.927.5320 www.pplauction.com
RESIN EQUIPMENT (2) Imperial Indutrie Rein Storage Silo Model 60-40-12X30-0 High, S/N 1796-1, 1796-2, 2266 cu. ft., 45.3 Ton Cap., 40 lb./cu. ft. Max. Denity (2) Schuld Mfg. Rein Storage Silo Model 12X5645-40, S/N 68444-2, 68444-1, 109.2 Ton Capacity (6) Conair Franklin 2000 lb. (et.) Surge Bin, with Hopper (#15, #16, #17, #18, #19, #20) (3) 2000 lb. (et.) Surge Bin, with Hopper (#21, #22, #23) (4) 62 x 67 x 72 (et.) Overhead Rein Surge Bin 500 Aorted Aluminum Rein Ditribution Pipe, with Valve & Acceorie (4) Conair Franklin Portable Digital CompuDry Rein Dryer Model D06A4101310A or D06A4101310110, S/N ID0113, IDO114, D30689, D30517 (6) Novatec Portable Rein Dryer Model MPC-750, S/N 12-700J-1979, 12-700J-1980, 12-700J-1984, 12-700J-1981, 12-700J-0299, 12-700J-1982 (3) Conair Franklin Compu-Dry Portable Rein Dryer Model D01H4000300000, S/N D31847, D31829, 1D0098, with 300 lb. Hopper Conair Portable Dehumidifying Rein Dryer Model D200A611, S/N 300625, with 800 lb. (et.) Hopper (3) Aorted Novatec Portable Dehumidifying Rein Dryer, with 800 lb. (et.) Hopper Novatec NovaDrier Rein Dryer with 600 lb. Hopper Model 10A2188, S/N 0989 (3) Aorted Conair Franklin Compu-Dry Portable Rein Dryer DriAir Indutrie Rein Dryer Model Arid-X100PDII, S/N D10542 Novatec Twin Tank Rein Dryer Model MPC-750, S/N 10A-2186 (#3140) (3) Novatec 2000 lb. (et.) Rein Drying Hopper (5) Novatec 1000 lb. (et.) Rein Drying Hopper (3) Conair Franklin Vacuum Pump, with Filter (6) 5 HP & 10 HP Vacuum Pump COOLING WATER EQUIPMENT AEC Cooling Water Holding Tank Model Tank T1100D, S/N 93G1270, with (2) 25 HP Pump Cooling Water Holding Tank, with (2) 25 HP Pump Conair Tempro Cooling Water Holding Tank, with (5) Pump (two motor miing) Trane Serie Chiller Model PTAA1004XJ01A300BDG, S/N 497H04682 (2) Evapco Platform Mounted Single-Fan Cooling Tower AEC Platform Mounted Single-Fan Cooling Tower (3) Baltimore Air Coil Platform Mounted Galvanized Cooling Tower (2) AEC Platform Mounted Fibergla Cooling Tower (10) Conair, Sentra & Cincinnati Milacron Portable Temperature Controller Innovative Water Technologie Tower Klean Cooling Tower Water Cleaning Sytem PPL Auction Phone: 224.927.5320 www.pplauction.com 5
CRANES FORKLIFTS DIE FLIPPER BURN-OFF FURNACE Demag 40 Ton x 46.5 Span Twin Girder Bridge Crane, S/N 91025, Radio Control Dehazo 20 Ton x 46.5 Span Twin Girder Bridge Crane, Radio Control Wolverine 14 Ton x 30 (et.) Radio Controlled Bridge Crane, with 100 (et.) Self Supporting Runway Nian 4400 lb. LP Forklift Model MCP1E2A25LV, S/N CP1F2-9P0463, Solid Tire, Overhead Guard, 187 Lift of 3-Stage Mat Clark 4225 lb. LP Forklift Model GCS25MB, S/N G138MB-0334-6072FA, Solid Tire, Overhead Guard, 188 Lift of 3-Stage Mat Dooan 2400 lb. LP Forklift Model GC155-3, S/N PI-00300, Solid Tire, Overhead Guard, 187 Lift of 3-Stage Mat, Side Shift (30) Aorted Forklift LP Tank Caldwell 30 Ton Die Flipper Pollution Control Product Ga Fired Controlled Pyrolyi Inert Ga Double-Door Burn-Off Furnace Model PRC 2905119, S/N N/A, 800,000 BTU, 8 x 10 (et.) Overall SPRAY PAINT FINISHING LINES (to be offered a line & a component) Mezzanine Mounted Conveyor Spray Paint Finihing Line (for removal with mezzanine), with (2) ABB Robot Spray Booth (with partial 3rd robot), Manual Spray Booth, (2) Single Pa Infrared Bake Oven, (2) Light Duty Overhead Finihing Conveyor, Control, 65 x 75 Mezzanine Mezzanine Mounted Conveyor Spray Paint Finihing Line (for removal with mezzanine), with (2) ABB Robot Spray Booth, (2) Manual Spray Booth, (2) Single Pa Infrared Bake Oven, (2) Light Duty Overhead Finihing Conveyor, Control, 65 x 100 Mezzanine Graco Spray Paint Finihing Line w/(2) ABB Robot Spray Booth, (2) Black Body Infrared Bake Oven, Light Duty Overhead Finihing Conveyor, Control PAINT KITCHENS FINISHING CONVEYOR (2) Self Contained Paint Kitchen, with (8) Drum Mixer, Valve, Piping, Air Conditioned Room (for removal) 1000 (et.) Very Light Duty Overhead Finihing Sytem Conveyor with Hanger on 6 Center, with Drive Attend or Bid Online at 6 PPL Auction Phone: 224.927.5320 www.pplauction.com
AIR COMPRESSORS BALER INSPECTION EQUIPMENT Ingeroll Rand 250 HP Rotary Air Compreor Model SSR-EPE250-2S, S/N EE1724U98302, 990 CFM, 125 PSIG, Intelliy Control Ingeroll Rand 200 HP Rotary Air Compreor Model SSR-FPE200-2S, S/N EF1576U98279, 990 CFM, 125 PSIG, Intelliy Control Ingeroll Rand Refrigerated Air Dryer Model TM1400-TW, S/N 98KTM509, Intelliy Control Ingeroll Rand Refrigerated Air Dryer Model TM1125-TW, S/N 98JTM479, Intelliy Control Wenzel 72 x 120 x 72 (et.) Coordinate Meauring Machine Model RS1618, S/N RS941041, 72 x 120 Granite Bae, with CPU 36 x 60 x 6 Granite Surface Plate CRIB STORAGE MOLDING MACHINE REPAIR PARTS SCRAP 200 (et.) Matching Crib Part Storage Shelving, Multi-Drawer Storage Cabinet, Wood Top Benche $200,000 (et.) Original Cot Injection Molding Machine Repair Part Large Electrical Salvage & Scrap Opportunity including: Heavy Duty Electrical Ditribution Panel, Electrical Wire, Switch Gear, 3000 Ton Injection Molding Machine, Scrap Steel & More MISCELLANEOUS EQUIPMENT PowerBo LP Rider Floor Scrubber Model TSS/82-HD, S/N 7281104 Miller 300 Amp MIG Welder Model 330A/BP Miller 200 Amp Portable MIG Welder Model Millermatic 200 Weco 1000 lb. Puh-Around Electric Stacker Lift (15) Aorted Cutom Automation Technologie Aembly Station Wilton 6 x 12 Belt/Dic Sander, with Tilt Table (25) 45 x 47 x 33 Deep Molded Platic Drop Front Stackable Tote (7) Aorted 36 Portable Belt Conveyor (2) Vertical Oil Storage Tank PPL Auction Phone: 224.927.5320 www.pplauction.com 7
105 Revere Drive, Suite C Northbrook, Illinoi 60062 www.pplauction.com PUBLIC AUCTION ENGINEERED PLASTIC COMPONENTS 300 Shellhoue Drive Rantoul, Illinoi 61866 THEATER STYLE AUCTION: Thurday, July 13 10:00 am INSPECTION: Wedneday, July 12 9:00 am - 4:00 pm CDT Automotive Part Injection Molding Facility ATTENTION: PLANT MANAGER OR MACHINERY BUYER PUBLIC AUCTION ENGINEERED PLASTIC COMPONENTS Theater Style Auction: Thurday, July 13 10:00 am INSPECTION: Wedneday, July 12 9:00am - 4:00pm CDT Auction Term & Condition REGISTRATION & BIDDING: Everything will be old to the highet bidder for cah, in accordance with the auctioneer normal Term of Sale, which are available at the ite or by requet at 224-927-5320. A 15% Buyer Premium will be added to the final bid price. All bid are in US dollar. An 18% Buyer Premium will be added to online bid. Your bid i a contract: Place a bid only if you re eriou about buying the item. If you are the high bidder, you will enter into a legally binding contract with PPL Auction. PAYMENT: All ucceful Bidder agree to make full payment to PPL Auction at the concluion of the ale. Only Bank Wire Tranfer, Bank Check or Cahier Check payable to PPL Auction will be accepted. Firm and peronal check accepted only if accompanied by a letter from your bank guaranteeing your fund. If you are uing a wire tranfer your bank may wire the fund the day after the ale. All ale are ubject to ale and/or local taxe unle a igned exemption form i preented at the time of the purchae. Payment will be made in US dollar only. VERIFY DESCRIPTIONS: Note: Although all information ha been obtained from ource deemed reliable, the auctioneer and eller make no warranty or guarantee, expreed or implied, a to the accuracy of the information contained in the auction brochure, lot catalog or ale web page. Buyer agree to accept aet purchaed per tandard auction term, AS IS, WHERE IS, WITH ALL FAULTS WITHOUT ANY REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER PERSON. THERE ARE NO EXPRESSED OR IMPLIED REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. REMOVAL & RIGGING: Removal and Rigging i the reponibility of the buyer. Anyone, either a buyer or a rigger, who ue a powered vehicle to remove anything from the auction ite, will be required to preent a certificate of inurance. Removal may begin when the auction ha completed and payment in full ha been made. ISSUANCE OF TITLE: Title relative to titled aet purchaed will be mailed to the purchaer addre on file after payment i received and cleared. All invoice mut be paid in full at end of auction. Any merchandie not paid for at thi time will be conidered abandoned and may be reold by auctioneer, any lo incurred in the reale to be borne by the original buyer. UNABLE TO ATTEND? Bid online in real time at ON-LINE BIDS SUBJECT TO 18% BUYER S PREMIUM Scan with your phone to link to our webite 105 Revere Drive, Suite C Northbrook, Illinoi 60062 Ph: 224.927.5320 Fax: 224.927.5311 ale@pplauction.com www.pplauction.com PPL Licene No. 444.000322 David Mulin Licene No. 441.001650 Joel Berh Licene No. 441.000826 Michael L. Ackerman Licene No. 440.000539