Rol van ISSeP als sectoraal operator

Similar documents
BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

WORK PACKAGE 4 DELIVERABLE D.T4.1.4

BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY

Security Standardisation - Mandate M/487 Jolien van Zetten

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations

Confused by standards Standards for social alarms

Particle Tracking Analysis for particle counting

Test procedure/ method identification IP 100 (ISO 9096, ČSN EN )

EU Best practice of Technical Committees and benefits that could be achieved

Cooperation between EGRC and ISO/TC 82, Mining. A subject worth exploring

Why participate in standardization work?

BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 142 WOODWORKING MACHINES SAFETY EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 159 HEARING PROTECTORS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY

BUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 249 PLASTICS

International comparison of validation methods for dust concentration measurement

INTERNATIONAL STANDARD

Porcelain (Vitreous) Enamel: European and International Standardization

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

healthy comfort Indoor Air Quality Solutions

Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY

Report on the activities of the ATEX consultant. Xavier Lefebvre. Contract : CENELEC/NA Consultant/2013-1

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

BSI the UK voice into European and national standards

Role of Standards in Exploiting Technology and Research

CEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:

BUSINESS PLAN CEN/TC 239 RESCUE SYSTEMS EXECUTIVE SUMMARY

Standards for nanotechnologies

Introduction to ISO and ISO membership

Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7

CEN System Delegated Decisions Dispatch 33:2016

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

Many different instruments Many different operating principles including: May sample many different gases & vapour From relatively simple to complex

Ramon 2.2 Radon-Monitor

Update on European Standardization Work

CEN strategies and plans for a global acceptance of the Eurocodes

BUSINESS PLAN CEN/TC 191 FIXED FIREFIGHTING SYSTEMS EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD

Australian/New Zealand Standard

BUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices

ACTIVITIES OF THE MEASURING GROUP

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

Relevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages

BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012

Lloyd s Register Type Approval System Test Specification Number 3

BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY

International and European standardization of Nanomaterials

Fibre Optic Connector and Component Standards Developments & Key Issues in IEC & CENELEC. Philip C Longhurst Corporate Fibre Optic R & D Manager

ISA 18.2 WG8. Purpose Definitions Status. By: Lieven Dubois, Co-chair

CEN/TC 442 Decisions taken /16

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

Certificate: / 29 April 2014

Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK

ISO/TS TECHNICAL SPECIFICATION

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 215 RESPIRATORY AND ANAESTHETIC EQUIPMENT EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 260 FERTILIZERS AND LIMING MATERIALS

Technical standards to support the evolution of technology enabled care services

ISO INTERNATIONAL STANDARD

This document is a preview generated by EVS

EU flammability standards and ENFIRO

Healthy Climate Indoor Air Quality Solutions. Solutions that fit your unique needs

Fundamentals is subdivided into Sources of Radiation, Biological Effects, Mathematics, Chemistry, Physics, and Units and Terminology.

BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY

ISO/CEN ACTIVITIES. EURL-Campylobacter workshop 2018 Hanna Skarin

A new model for CEN/TC 89 Thermal performance of buildings and building components

ISO INTERNATIONAL STANDARD. Hydrogen generators using fuel processing technologies Part 1: Safety

INTERNATIONAL STANDARD

Glenside Environmental Services Ltd

ISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests

This document is a preview generated by EVS

WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA

ISO INTERNATIONAL STANDARD

ISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly

BS 7913 Launch event. 10 March 2014 Somerset House, London

Introducing the most technically advanced indoor air treatment system

LASER SAFETY TRAINING CATALOG LASER INSTITUTE OF AMERICA S MAKE LASER SAFETY YOUR PRIORITY LASER

BUSINESS PLAN CEN/TC 231 MECHANICAL VIBRATION AND SHOCK EXECUTIVE SUMMARY

ISO/TS TECHNICAL SPECIFICATION. Fire detection and alarm systems Part 9: Test fires for fire detectors

BUSINESS PLAN CEN/TC 145 PLASTICS AND RUBBER MACHINES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 194 USTENSILE IN CONTACT WITH FOOD EXECUTIVE SUMMARY

A Notification under Article 12 of Regulation (EU) No 1025/2012 1

BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY

Name title. Event Date Venue

Safety standard developments within ASHRAE 15 and ISO UNEP workshop on safety standards, Bangkok

Gas Temperature Measurements with High Temporal Resolution

Transcription:

Rol van ISSeP als sectoraal operator B. Bergmans TC146 TC264 ISSEP : CORE BUSINESS ISSeP : Main activity RISK EVALUATION ENVIRONMENTAL MONITORING ENVIRONMENTAL MONITORING Air Water soil RESEARCH & TECHNOLOGY 1

ISSEP : CORE BUSINESS ISSeP : Main activity ENVIRONMENTAL MONITORING RISK EVALUATION Air Water soil RESEARCH & TECHNOLOGY ENVIRONMENTAL MONITORING Air Water soil ISSEP : CORE BUSINESS ISSeP : Main activity ENVIRONMENTAL MONITORING RISK EVALUATION Air Water soil RESEARCH & TECHNOLOGY RISK EVALUATION 2

ISSEP : CORE BUSINESS ISSeP : Air quality department ENVIRONMENTAL MONITORING Air AIR MONITORING - Ambient air network - Mobile laboratories - Emission monitoring REFERENCE LABORATORY - Audit RW - Sector operator (NBN) TECHNICAL ADVISE RESEARCH FACILITIES - Pilot installation - Research program WHAT IS A STANDARD Definition of a Standard? A standard is a technical document designed to be used as a rule, guideline or definition. It is a consensus-built, repeatable way of doing something. A standard is not always the best solution! 3

WHAT IS A STANDARD Definition of a Standard? A standard is a technical document designed to be used as a rule, guideline or definition. It is a consensus-built, repeatable way of doing something. Harmonized way of doing Same rule in 33 countries WHAT IS A STANDARD Definition of a Standard? A standard is a technical document designed to be used as a rule, guideline or definition. It is a consensus-built, repeatable way of doing something. Lobbying is part of the game 4

WHAT IS A STANDARD Definition of a Standard WHAT IS A STANDARD General procedure for developing a standard 5

WHAT IS A STANDARD General procedure for developing a standard ROLE OF ISSEP AS SE Role of NBN AND ISSEP National Standardization Bodies (NSB) All European countries have a National Standardization Body For Belgium = NBN assisted by ISSeP as Sector operator -Promotes the Normalization -Enables measure of consultation and support at national level -Ensures consensus at national level -Appointing experts to Technical Committee and working group -Obligation of commenting and Voting - Sales publishing standard - withdraws any conflicting national standards 6

ROLE OF ISSEP AS SE PASSIF MEMBER : Description PASSIF MEMBER OF A COMMISSION Access : - No special condition required just prove interest Prerogative and obligation - Access to all N-doc of the commission. - Can submit informative comments - Can submit informative votes - No obligation except not circulating documents Financial cost : -100 /year per TC and SC ROLE OF ISSEP AS SE PASSIF MEMBER : N-doc consultation 7

ROLE OF ISSEP AS SE PASSIF MEMBER : N-doc consultation ROLE OF ISSEP AS SE PASSIF MEMBER : N-doc consultation 8

ROLE OF ISSEP AS SE ACTIF MEMBER : Description ACTIF MEMBER OF A COMMISSION Access : -Being a passive member of the commission -Prove technical skills, interest and define links with commercial companies Prerogatives and obligations -Access to all intern document of the WG -Possibility to represent Belgium at TC level -Possibility to chair a WG -Obligation to take active part to the work of the WG -Obligation of votes / comments on all N-Doc related to the WG -Obligation to take part to WG meeting regularly -Financial cost : -50 /year per WG. -Free for academic and Government agency ROLE OF ISSEP AS SE ACTIF MEMBER : WG document consultation 9

ROLE OF ISSEP AS SE ACTIF MEMBER : WG document consultation Way of voting ROLE OF ISSEP AS SE 10

Way of voting ROLE OF ISSEP AS SE ROLE OF ISSEP AS SE National mirror committee - Maximum 3 Belgian expert per WG - Meeting organize if difference of view - Designation of heat of delegation 11

ROLE OF ISSEP AS SE Other tools available to help in the normalization process OTHER TOOLS AVAILLABLE : -Room available for meeting -Organization of web conference - BELGIAN EXPERT FOR AIR Actual CEN normalization SC/WG Title CEN/TC 264/WG 1 Dioxins - emissions CEN/TC 264/WG 2 Air quality - Determination of odour concentration by dynamic olfactometry CEN/TC 264/WG 3 HCl Emission - manual method CEN/TC 264/WG 4 Total gaseous organic carbon (emissions) CEN/TC 264/WG 5 Total dust at low concentrations (emissions) CEN/TC 264/WG 8 Measurement of total mercury emissions CEN/TC 264/WG 9 Quality assurance of automated measuring systems CEN/TC 264/WG 11 Ambient air quality - Diffusive samplers for the determination of gases and vapours - CEN/TC 264/WG 12 Reference method for determination of SO2/NO2/O3/CO in ambient air CEN/TC 264/WG 15 Particulate Matter (PM10/PM2,5) CEN/TC 264/WG 16 Reference measurement methods for NOx, SO2, O2, CO and water vapour emissions CEN/TC 264/WG 18 Open path optical methods for the measurement of ambient air quality CEN/TC 264/WG 21 Measurement method for B(a)P in Ambient Air CEN/TC 264/WG 26 Emissions into indoor air CEN/TC 264/WG 27 Air quality - Determination of odour exposure in ambient air by using field inspection CEN/TC 264/WG 28 Measurement of bioaerosols in ambient air and emissions CEN/TC 264/WG 29 Ambient air - Monitoring of genetically modified organisms (GMO) CEN/TC 264/WG 30 Biomonitoring methods with flowering plants CEN/TC 264/WG 31 Biomonitoring methods with mosses and lichens CEN/TC 264/WG 32 Air quality - Determination of the particle number concentration CEN/TC 264/WG 33 Greenhouse gas (GHG) emissions in energy-intensive industries CEN/TC 264/WG 34 Standard method for measurement of NO3, SO42-, CL-, NH4+, Na+, K+, MG2+ and Ca2+ CEN/TC 264/WG 35 EC/OC in PM CEN/TC 264/WG 36 Measurement of stack gas emissions using FTIR instruments CEN/TC 264/WG 37 Predictive Emission Monitoring systems CEN/TC 264/WG 38 Determination of fugitive VOC emissions CEN/TC 264/WG 39 Sampling and analysis of airborne pollen grains and fungal spores Belgian experts in 24 WG on 27, but half of them with only one expert! 12

BELGIAN EXPERT FOR AIR Actual ISO normalization SC/WG ISO/TC 146/SC 1/WG 25 ISO/TC 146/SC 1/WG 26 ISO/TC 146/SC 1/WG 27 ISO/TC 146/SC 1/WG 28 SO/TC 146/SC 2/WG 1 ISO/TC 146/SC 2/WG 2 ISO/TC 146/SC 2/WG 3 ISO/TC 146/SC 2/WG 4 ISO/TC 146/SC 2/WG 5 ISO/TC 146/SC 2/WG 7 ISO/TC 146/SC 2/WG 8 ISO/TC 146/SC 2/WG 9 ISO/TC 146/SC 2/WG 10 ISO/TC 146/SC 3/WG 1 ISO/TC 146/SC 3/WG 8 ISO/TC 146/SC 4/WG 2 ISO/TC 146/SC 5/WG 1 ISO/TC 146/SC 5/WG 3 ISO/TC 146/SC 5/WG 4 ISO/TC 146/SC 5/WG 5 ISO/TC 146/SC 5/WG 6 ISO/TC 146/SC 6/WG 4 ISO/TC 146/SC 6/WG 6 ISO/TC 146/SC 6/WG 10 ISO/TC 146/SC 6/WG 13 ISO/TC 146/SC 6/WG 16 ISO/TC 146/SC 6/WG 17 ISO/TC 146/SC 6/WG 18 ISO/TC 146/SC 6/WG 19 ISO/TC 146/SC 6/WG 20 ISO/TC 146/SC 6/WG 21 ISO/TC 146/SC 6/WG 22 Title Greenhouse gases - Automated Measuring Systems (GHG-AMS) Biomass and fossil derived CO2 Selenium Ammonia Particle size-selective sampling and analysis Inorganic particulate matter Gases Organic vapours Inorganic fibres Silica Assessment of contamination of skin and surfaces from airborne chemicals Sampling pump performance Terminology and Quality Control in Workplace Air Determination of asbestos fibre content Determination of ozone - UV method Uncertainty of air quality measurements Wind vanes and rotating anemometers Test methods for comparing the performance of radiation shields and definitions of important Evaluation methods for atmospheric dispersion models Remote atmospheric boundary layer profiling - Test methods for ground based equipment Lidar Asbestos - Mineral fibres Ventilation rate measurement Fungi Joint between ISO/TC 146/SC 6 and ISO/TC 22 WG: Determination of volatile organic Test methods for VOC detectors Sensory testing of indoor air Flame retardants Investigation of constructions Determination of phthalates Strategies for the measurement of airborne particles Brominated flame retardants Belgian experts in only 10 WG on 24 most of the time with only one expert! BELGIAN EXPERT FOR AIR Why do not take part to the normalization process? As a active lab you have a lot of experience, why do not share this knowledge by taking part to the normalization process? - Put your field experience in standard - Represent your country as an expert - Meet other experts and learn for their experience -Create a new network of peoples -Valorised your work true international publication -Money is available for some validation (mandates) -Be inform of future trend and normative imposition -Be reactive to future change in equipment -Passive membership is really affordable 13

THANK YOU FOR YOUR ATTENTION 14