VLN Product Specifications Nastro LED Garage Light W Nastro LED Garage Light EO-LN- EO-LN-T EO-LN-HV EO-LN-HVT Linear Design System Light Efficacy > LPW Easy Installation & Maintenance IP Five Years Warranty ETL, CE, RoHS, CB, WEEE PERFORMANCE LED Chip Lumen Output (IES) Power Consumption Efficacy (IES) Beam Angle Color Temperature CRI Lumen Maintenance Input Voltage Power Factor OSRAM, lm W > lm/w, / ~K (~K Optional) L>, hours (Calculated Using TM- Calculator) - VAC (/ VAC Optional) Dimming Optional. minimum Indoor Car Parking Decks Parking Garages Corridor Super Market ENVIRONMENTAL IP Rating Operating Temperature Humidity PHYSICAL Dimensions (L W H) Weight Mounting Options Fixture Material IP - to C (- to F) % to % RH mm (... in). kg (. lbs) Pendant Mount(/, / Optional) Surface Mount Aluminum Alloy WARRANTY Years
VLN DEGREE LENS m m m m m Illumination- Degree Beaming Angle Height Beam Diameter LUX φm φm φm φm φm LUX LUX LUX LUX LUX Beam Angle (% max) Field Angle (%) Luminous Flux (IES) Light Efficacy (IES) UGR Cutoff Classification DEG DEG, lm > lm/w Cutoff.~..~. Mounting Hight m, Tilt, LUX-LUX DEGREE LENS Illumination-/ Degree Beaming Angle Rectangular Light Spot m m m m LUX LUX Beam Angle (% max) Field Angle (%) Luminous Flux (IES) DEG DEG, lm m m m m m m LUX LUX LUX Light Efficacy (IES) Cutoff Classification > lm/w Cutoff.~..~. Mounting Hight m, Tilt, LUX-LUX
VLN Microwave Sensor & Dimmer Option Technical Data Operating voltage -V Standby power approx..w Switched power Max.capacitive load: W @V, W@V Warm time s Detection area ///%, can be customized Sensor principle Microwave motion detector Hold time S/S/min/min/min/min/min, can be customized Microwave frequency.ghz+/-mhz Standby period s/s/min/min/min/min/h/+ can be customized Microwave power <.mw Standby dimming level %/%/%/% can be customized Detection range Max. (φxh):m x m Daylight threshold ~lux daylight/twilight/darkness, can be customized Detection angle Operating temperature - C ~ + C IP, IP(mounting in Hytronik special box) Mounting height o ~ o Max.m Certificate ETL, FCC o IP rating o Detection Pattern Ceiling Mounting Pattern (m) Wall Mounting Pattern (m) Wall Mounting Height(m) Ceiling Mounting Height(m) area of high sensitivity area of lower sensitivity Setting Detection Area Detection area can be reduced by selecting the combination on the DIP switches to fit precisely for each specific application. Hold-time Hold-time means the time period you would like to keep the lamp on % after the person has left the detection area. Daylight Sensor The daylight threshold can be set on DIP switches, to fit for particular application. Stand-by Period (Corridor function) This is the time period you would like to keep at the low light output level before it is completely switched off in the long absence of people. Note: means on/off control; + means steps of dimming control, fixture never switch off. Stand-by Dimming Level This is the dimmed low light output level you would like to have after the hold-time in the absence of people.
VLN Infrared Sensor & Dimmer Option Technical Data / VAC, /Hz Sensitivity: None, Low, Med, Max; Default Max - Load @ VAC -W Ballast or Incandescent - Load @ VAC -W Ballast Setpoint: None, - fc, Auto; Default fc VAC, Hz; Load -W Ballast Fade Down Time: None, - sec.; Default None Relay Life Rating:, Cycles (/ VAC);, Cycles ( VAC) Operating Humidity: -% High Mode: - V; Default V Weight:. oz ( grams) Low Mode: Off, -. V; Default V IP, CE Compliant Time Delay: Sec., - min.; Default min. TUV, UL and cul Listed Cut Off Delay: None, - min. - hrs.; Default hr. Five Year Warranty Ramp up time: None, - sec.; Default None Operating Temperature: --of (--oc) Coverage Pattern L: Coverage Density and range of the coverage pattern is determined by the L lens provides a diameter coverage area when mounted at a height of. type of lens and mounting height L Low Density/Wide Range Lens. (.mm) L: Coverage ft L has a high density lens that covers a diameter area at a height of. FSP-L High Density/Reduced Range Lens. (.mm)..mm L: Coverage L is designed for mounting at heights between to. Its coverage area can be up to in diameter when mounted at...mm ft L Foot High Bay Lens. (.mm) ft Setting Refer to Dimmer&Romotion operate instruction...mm
VLN Mounting Options Pendant Mount(/, / Optional) Surface Mount EO LN GL NASTRO POWER Input Voltage COLOR TEMP. BEAM ANGLE DIMMABILITY IP RATING MOUNT POWER CORD - W T - WT HV - WHV HVT - WHVT Note:T=Tunable, W dimmable fixture, here referred as T; W fixture(v), here referred as HV; W dimmable fixture(v), here referred as HVT. - ~V AC - /V AC - ~K - ~K - ~K - - / - Non Dimmable - Microwave Sensor & Dimmer - Infrared Sensor & Dimmer - Photocell - Pendant Mount(/ NPT) - Pendant Mount(/ NPT) - Surface Mount Note: In case other mounting method required, please contact the sales/service personnel. Note:~K LEDs may cause longer delivery time - IP - m American Standard Cord - m Australian Standard Cord c/w Plug - m European Standard Cord - Others Note: In case other power cord required, please contact the sales/service personnel.