imple, scalable, wireless lighting control Transform existing buildings with wireless lighting controls Wireless controls and sensors imple-to-use software Remotes Centralized control and integration Occupancy and daylight sensors Vive wireless hub Lighting controllers Wired/ Ethernet Plug load controllers Demand response BACnet integration Vive Vue software Communication protocols Integrated fixture control and sensing Communicate via RF to control components Communicate via WiFi to smart devices Communicate via wired Ethernet to Vive hub 08/17 A onepar Company Viking Electric upply is a M/F/Disabled and Vet EEO/AA employer.
Contact your Viking Electric representative to place your order today Model Number Vive wireless hub HJ-0-FM HJ-1-FM HJ-1-M HJ-2-FM HJ-2-M tarter Vive wireless hub, flush mount tandard Vive wireless hub, flush mount tandard Vive wireless hub, surface mount Premium Vive wireless hub, flush mount Premium Vive wireless hub, surface mount PowPak relay module RMJ-5R-DV-B 5 A relay RMJ-5RCCO1-DV-B 5 A relay with one contact closure output RMJ-16R-DV-B 16 A relay RMJ-16RCCO1-DV-B 16 A relay with one contact closure output PowPak dimming module with 0-10 V control RMJ-8T-DV-B Controls up to 8 A of 0-10 V controlled fixtures PowPak contact closure output module RMJ-CCO1-24-B one contact closure output PowPak relay module RMJ-20R-DV-B RMJ-20OCC1DV-B 20 A general purpose switch 20 A general purpose switch with one contact closure output Individual fixture control FCJ-010 FCJ-ECO FCJ-010-BULK8 FCJ-ECO-BULK8 FC-ENOR FC-VENOR DFCJ-OEM-RF* DFCJ-OEM-OCC* 0-10 V Control Module Ecoystem Control Module 0-10 V Control Module 8-pack Ecoystem Control Module 8-pack Occupancy/Daylight ensor Vacancy/Daylight ensor Vive Integral Fixture Control (RF Only) Vive Integral Fixture Control (with ensing) * Contact your Viking Electric representative and ask for a Vive-enabled fixture or visit lutron.com/findafixture Fixture adders may vary.
imple, scalable, wireless lighting control Model Number Wireless Receptacle CAR2-15-TR 15 A plit (half switching; single pole/downstream, 120 V CAR2-15-DTR 15 A Duplex (dual switching; single pole/downstream, 120 V CAR2-20-TR 20 A plit (half switching; single pole/downstream, 120 V CAR2-20-DTR 20 A Duplex (dual switching; single pole/downstream, 120 V Maestro Wireless switches* MRF2-6AN-XX MRF2-8-DV-XX MRF2-8AN-120-XX 6 A lighting, 3 A fan (1/10 HP motor), 120 V 8 A lighting, 3 A fan (1/10 HP motor, 120 V only), spec grade 8 A lighting, 5.8 A fan (1/4 HP motor), spec grade, 120 V Maestro Wireless dimmers* MRF2-6CL-XX MRF2-6ELV-XX MRF2-6ND-120-XX 150 W dimmable CFL/LED, 600 W incandescent halogen, 600 VA MLV, 120 V, no neutral 600 W ELV, 120 V 600 W/VA incandescent/halogen/mlv, 120 V Maestro Wireless/Maestro occupancy sensing control companion devices * MA-A-XX MA-A-277-XX MA-R-XX MA-R-277-XX Multi-location companion switch, 120 V Multi-location companion switch, 277 V Multi-location companion dimmer, 120 V Multi-location companion dimmer, 277 V * (XX in the model number represents color/finish code; use WH for White) Maestro and Pico ** Colors Gloss Colors atin Colors (Prices vary from Gloss Colors) White** (WH) Hot (HT) Terracotta (TC) Palladium (PD) Ivory** (IV) Merlot (MR) Greenbriar (GB) Mocha tone (M) Almond (AL) Plum (PL) Bluestone (BG) Goldstone (G) Light Almond** (LA) Turquoise (TQ) Taupe (TP) Desert tone (D) White/Gray** (WG) ea Glass (G) Eggshell (E) tone (T) Gray (GR) Midnight (MN) Biscuit (BI) Limestone (L) Brown (BR) ienna (I) now (W) Black** (BL) VikingElectric.com
Contact your Viking Electric representative to place your order today Model Number Pico wireless remotes PJ2-2BRL-GXX-L01 PJ2-2B-GXX-L01 PJN-2B-GXX-L01 PJ2-3BRL-GXX-L01 PJ2-3B-GXX-L01 PJN-3BRL-GXX-L01 PJ2-4B-GXX-L21P PJ2-4B-GXX-L01 PJ2-4B-GXX-L31 2-button with raise/lower 2-button Nightlight 2-button 3-button with raise/lower 3-button Nightlight 3-button with raise/lower 4-button with 2 group control 4-button with zone control 4-button with scene control Pico accessories PICO-WBX-ADAPT CW-1-XX CW-2-XX CW-3-XX CW-4-XX L-PED1-XX L-PED2-XX L-PED3-XX Pico wireless remote wallbox adapter Claro 1-gang wallplate Claro 2-gang wallplate Claro 3-gang wallplate Claro 4-gang wallplate Pico wireless remote single pedestal Pico wireless remote double pedestal Pico wireless remote triple pedestal Radio Powr avr occupancy/vacancy sensors * LRF2-OCR2B-P-WH LRF2-OWLB-P-WH LRF2-OKLB-P-WH LRF2-OHLB-P-WH Ceiling-mount, 360 field-of-view, occupancy/vacancy sensor Wall-mount, 180 field-of-view, occupancy/vacancy sensor Corner-mount, 90 field-of-view, occupancy/vacancy sensor Hallway, occupancy/vacancy sensor Occupancy/vacancy sensor accessories L-CMDPIRKIT L-CRMK-WH LRF-ARM-WH L-WIRECAGE-WBX L-WIRECAGE-C L-WIRECAGE-W ensor lens masking kit for Radio Powr avr ceiling sensor Recess-mounting bracket for Radio Powr avr ceiling sensor Flexible armature mounting kit for Radio Powr avr wall, hall, corner sensors Wire guard for in-wall sensor, White Wire guard for ceiling-mount sensor, White Wire guard for wall-mount and hallway sensors, White * (XX in the model number represents color/finish code; use WH for White)
imple, scalable, wireless lighting control Model number Radio Powr avr daylight sensor LRF2-DCRB-WH Ceiling-mount daylight sensor Lamp socket wiring tester FDB-LWT-T5/T8 600 V, 100 KHz, 0.125 A max, CAT III Wallplates * CW-1-XX CW-2-XX CW-3-XX CW-4-XX Claro 1-gang wallplate Claro 2-gang wallplate Claro 3-gang wallplate Claro 4-gang wallplate ensor switches * M-OP2-XX M-OP5M-XX M-OP6M2-DV-XX 2 A lighting, 120 V PIR occ/vacancy; single pole, no neutral 5 A lighting, 120 V PIR occupancy/vacancy; 3 A fan, multi-location/3-way/single pole, no neutral 6 A lighting, 120-277 V PIR occupancy/vacancy, 3 A fan M-OP6M2N-DV-XX 6 A lighting, 120-277 V PIR occupancy/vacancy, 3 A fan M-OP6M2U-DV-XX 6 A lighting, 120-277 V PIR occupancy/vacancy, 3 A fan Dual-circuit sensor switches * M-OP6-DDV-XX 120-277 V PIR dual-circuit occupancy/vacancy; 4.4 A fan M-PP6-DDV-XX 120-277 V PIR dual-circuit partial-on occ/vacancy, 4.4 A fan Dual-technology sensor switches * * M-A102-XX M-B102-XX 6 A lighting, 120-277 V dual-tech occupancy/vacancy sensor, 4.4 A fan (120 V only); single pole, no neutral 6 A lighting, 120-277 V dual-tech occupancy/vacancy sensor, 4.4 A fan (120 V only); multi-location/3-way, neutral required Dual-technology dual-circuit sensor switches * * M-A202-XX M-B202-XX 6 A lighting per circuit, 120-277 V dual-tech occupancy/vacancy, 4.4 A fan (120 V only) per circuit; single pole, no neutral 6 A lighting per circuit, 120-277 V dual-tech occupancy/ vacancy sensor, 4.4 A fan (120 V only) 3-way, neutral required ensor dimmers * * M-Z101-XX MCL-OP153M-XX 8 A 120-277V; occ/vacancy; multi-location/3-way/single pole C L dimmer with PIR sensor; occupancy/vacancy; single pole/3-way/multi-location; 150 W CFL/LED * Vacancy models available to meet California Title 24 section 119(j) requirements. ** For dual-tech or 0-10 V vacancy models, add "-V-" before the color code (XX). VikingElectric.com
ave energy and improve building performance MAINTAIN Energy reporting Quickly view and display energy-usage information to drive decision making and demonstrate savings. Load shed Easily set lighting reduction levels that automatically respond during peak electricity usage times. chedules Use a weekly calendar to automatically adjust lights based on time of day. Light Control Directly adjust the light levels. eamlessly integrate with your building system The BACnet/IP protocol is the primary means of integration. BACnet is embedded or native in the Vive wireless hub, which means no external interfaces or gateways are required in order to communicate with other systems. Building/Energy Management ystems (BM/EM) HVAC Energy Dashboards and Analytics Packages Audio & Video IT