SHORTFORM CATALOGUE

some words about us... Olympia Electronics was founded in 1979 by Nikolaos Lakasas and Panagiotis Arvanitidis. Throughout these 31 years, the company is active in developing innovative electronic safety systems using state of the art technology. The company, by employing approximately 130 employees, is the dominant Greek enterprise in the electronics safety systems area, with special dynamic presence in 80 countries worldwide. The company s philosophy is based on the approach "high quality competitive products with high technology in the most competitive price and customer centric orientation. PRODUCTS Emergency Lighting Emergency Lighting with LEDs Special categories of lighting (self-testing emergency luminaires, luminaires for CBS, anti-explosive type luminaires e.t.c.) Conventional Fire Detection Systems Analogue Addressable Fire Detection Systems Gas Detection Systems Burglar Alarm Systems Addressable Nurse Call System Control - Warning Units Hotel Access Control Systems - Card Switches (RFID) Electronic Room Thermostats Electric Insect Traps (HACCP) HEAD OFFICE 72nd klm. OLD NATIONAL ROAD THESSALONIKI KATERINI (Methoni) Tel.: 0030 23530 51200 Fax: 0030 23530 51486 OUR LOCATION *for English dial 12 or 58 POSTAL CODE KOLINDROS - PIERIA - GREECE P.O. BOX 60061 www.olympia-electronics.gr info@olympia-electronics.gr 03

Some words about us QUALITY «Our best product is Quality». Olympia Electronics aiming in the quality, has adopted in the last years, production and inspection procedures that have supply the market with products that are totally in accordance with European construction prototypes (ÅÍ). The production procedure of Olympia Electronics has been certified with ISO 9001 from the eminent German institute of certification TUV SAAR CERT. Also her products allocate certificates from various laboratories as : ANCO, EMV, PHOENIX TEST LAB, LS, MIKES BABT, LPCB, VdS, or countries as UAE,GOST, EURO CERT e.t.c. and CE marking. Also OLYMPIA - ELECTRONICS A.E.: conquered in 2005 the European enterprise distinction in the scope of EFQM Levels of Excellence and the certificate of conformity of model ELOT 1801 / OHSAS 18001 of EURO CERT. At the 2008 acquired the ISO 14000 System Certificate of Environmental Management. THE PROJECTS Olympic village Olympic equestrian center Olympic committee building of Athens 2004 Olympic SLALOM center Weight lifting arena Agios Cosmas sailing installations Peace and Friendship stadium Hellenic Parliament building Frankfurt airport - Germany Schwerin metro - Germany Hraklio and Thessaloniki Airports Happel Stadium - Vienna Movenpick, Éïñäáíßá, ÐÝôñá THE EXPORTS We export to 72 countries of Abroad in the following geographic regions: European Union Eastern European countries & Russia Middle East and countries of Gulf Africa U.S.A. 04

GENERAL CONTENTS EMERGENCY LIGHTING EMERGENCY LIGHTING WITH LEDs EMERGENCY LIGHTING WITH FLUORESCENT LAMPS 07 - SPECIAL CATEGORIES FIRE DETECTION SYSTEMS CONVENTIONAL FIRE DETECTION SYSTEMS ADDRESSABLE FIRE DETECTION SYSTEMS 39-56 FIRE DETECTION PERIPHERALS GAS DETECTION SYSTEMS GAS DETECTION SYSTEMS 57-60 BURGLAR ALARM SYSTEMS BURGLAR ALARM SYSTEMS 61-66 OTHER CATEGORIES CONTROL - WARNING UNITS HOTEL ACCESS RFID - CARD SWITCHES 67-81 ELECTRONIC ROOM THERMOSTATS ELECTRIC INSECT TRAPS MARKING SIGNS REPLACEMENTS - ACCESSORIES INDEX 83-92

GENERAL GUIDES EMERGENCY LIGHTING EXAMPLE OF INSTALLATION OF EMERGENCY AND INDICATION LUMINAIRES 3. Escape route emergency luminaire 2. Emergency luminaire with direction indicating legend 4. Direction indicating luminaire 5. Water proof emergency luminaire installed in external areas 1. Emergency luminaire with direction indicating legend over a door LIGHT OUTPUT OF EMERGENCY LUMINAIRES On the following pages, there are many emergency luminaires that use LEDs as light source. In order to become comprehensible the equivalence between them and the ordinary luminaires that use lamps, bellow is a list with the light output of emergency luminaires with fluorescent lamps. The stated light output is the light output produced during emergency operation. Emergency luminaire with 1x6W (T5) lamp Emergency luminaire with 1x8W (T5) lamp Emergency luminaire with 2x8W (T5) lamp Emergency luminaire with 1x11W (CFL) lamp Emergency luminaire with 1x18W (CFL) lamp Emergency luminaire with 2x20W (halogen) lamp Emergency luminaire with 2x55W (halogen) lamp Light output 50 lumen Light output 85 lumen Light output 170 lumen Light output 150 lumen Light output 210 lumen Light output 800 lumen Light output 2400 lumen NOTICE: Technical specification are subject to change after the catalog has been published. For any clarifications please come in contact with our technical department 06

EMERGENCY LIGHTING

CONTENTS EMERGENCY LIGHTING WITH LEDs EMERGENCY LUMINAIRES FOR INTERIOR USE WITH POWER LEDs WATERPROOF EMERGENCY LUMINAIRES WITH LEDs EMERGENCY INDICATION LUMINAIRES WITH LEDs LAMPS WITH LEDs RECHARGEABLE & BACK UP LIGHTING EMERGENCY LIGHTING WITH FLUORESCENT LAMPS LUMINAIRES FOR INTERIOR USE WATERPROOF EMERGENCY LUMINAIRES ANTI-EXPLOSIVE TYPE EMERGENCY LUMINAIRES SPECIAL CATEGORIES CENTRAL BATTERY SYSTEMS CBS ADDRESSABLE EMERGENCY LIGHTING EMERGENCY LUMINAIRES WITH HIGH POWER LIGHT OUTPUT COMMON TO EMERGENCY LUMINAIRES - CONVERTER

EMERGENCY LIGHTING EMERGENCY LIGHTING WITH LEDs EMERGENCY LUMINAIRES FOR INTERIOR USE WITH HIGH POWER LEDs WATERPROOF EMERGENCY LUMINAIRES WITH LEDs EMERGENCY INDICATION LUMINAIRES WITH LEDs LAMPS WITH LEDs RECHARGEABLE BACK UP LIGHTING LEDs SMALL CONSUMPTION GREAT EFFICIENCY AS POWER SOURCE RESPECT TO THE ENVIRONMENT

EMERGENCY LUMINAIRES FOR INTERIOR USE WITH LEDs LEDs Very slim profile Light sensor Self-testing Easy installation IR remote control capability Maintained and non-maintained Set of 3 colours included in the package LUMINAIRES WITH LIEDs SLIM LEDs LIGHT 2,5 cm Very slim profile GR-2000 Maintained / non-maintained / LEDs - 110/110lm 270x100x25mm 923200000 Maximum autonomous from 3 to 7 hours IRT-200 RC-15A IR remote control for the GR-2000 luminaire (ÊÇZ) 490000037 IP 20 1,5 cm *GR-2000 Registered by WIPO No. DM/ 074 490 LUMINAIRES WITH LIEDs SLIM LEDs LIGHT GR-8/2l Non-maintained / LEDs - 50lm / 2h 246x76x42mm 923008009 GR-8/9l Maintained / non-maintained / LEDs - 30/60lm, 3h 246x76x42mm 923378001 GR-8/12L Non-maintained / LEDs - 45lm / 3h 246x76x42mm 923008024 GR-9/2l Non-maintained / LEDs - 50lm / 4h 246x76x42mm 923009002 GR-9/9l Maintained / non-maintained / LEDs - 30/60lm, 6h 246x76x42mm 923009004 IP 20 ACCESSORIES FOR LUMINAIRES SLIM LEDs LIGHT S-00800 Exit sticker 215x65 mm for Slim Light 807008000 A-8/OPAL Diffuser opal for Slim LEDs Light 927008000 LUMINAIRES WITH LIEDs CLASSIC LEDs LIGHT GR-108/3L Non-maintained / LEDs - 75lm / 90min. 260x100x70mm 923108012 GR-151-3/3L Maintained / non-maintained / LEDs - 25/60lm, 3h (ships) 262x100x70mm 923151004 IP 20 COMVEX DIFFUSER MAINTAINED AND NON-MAINTAINED LUMINAIRES (OPTIONAL) SLIM CLASSIC LEDS LIGHT GR-1009/L/90 Maintained / non-maintained / LEDs - 25/45lm, 90min. GR-1009/L/180 Maintained / non-maintained / LEDs - 25/60lm, 3h. 260x100x51mm 260x100x51mm 923100905 923100900 IP 20 MAINTAINED AND NON-MAINTAINED LUMINAIRES (OPTIONAL) SLIM CLASSIC LEDs LIGHT GR-1006/9L/90 Maintained / non-maintained / LEDs - 25/45lm, 90min. 260x100x51mm GR-1006/9L/180 Maintained / non-maintained / LEDs - 25/60lm, 3h. 260x100x51mm 923100609 923100610 IP 20 LUMINAIRE FOR CBS SLIM CLASSIC LEDs LIGHT GR-1006/9L/12-24V Luminaire for CBS / LEDs - 60lm, AC/DC 260x100x51mm 923100608 IP 20 ACCESSORIES FOR LUMINAIRES SLIM CLASSIC LEDs LIGHT S-10090 Exit sticker 240x100mm for the GR-1009 luminaires 807100900 S-10060 Exit sticker 240x95mm for the GR-1006 luminaires 807100600 Self-adhesive legend contained in the package The self-adhesive legends below can be provided after order S-10090, S-10060, S-00800 10 S65L S65R S65D

EMERGENCY LUMINAIRES FOR INTERIOR USE WITH LEDs MAINTAINED / NON-MAINTAINED (OPTIONAL) LUMINAIRES WITH LEDs EASY LEDs LIGHT GR-310/12l /180 Maintained / non-maintained / LEDs - 30/75lm, 3h 350x134x45mm 923310025 IP 40 LUMINAIRES WITH POWER LEDs EASY LEDs LIGHT GR-310/4P Non-maintained / LEDs- 250lm/ 90min GR-310/6P Non-maintained / LEDs- 400lm/ 90min GR-312/4P Non-maintained / LEDs - 250lm/ 3h GR-312/6P Non-maintained / LEDs - 400lm/ 3h 350x134x45mm 350x134x45mm 350x134x45mm 350x134x45mm 923310022 923310023 923312012 923312013 IP 40 SELF-TESTING LUMINAIRES WITH POWER LEDs INTELLIGENT EASY LEDs LIGHT GR-315/4P GR-315/6P GR-316/4P GR-316/6P Self-testing, maintained / LEDs -125/250lm, 90min Self-testing, maintained/ LEDs -200/400lm, 90min Self-testing, maintained/ LEDs -125/250lm, 3h Self-testing, maintained/ LEDs -200/400lm, 3h 350x134x45mm 350x134x45mm 350x134x45mm 350x134x45mm 923315007 923315008 923316007 923316008 IP 40 EMERGENCY LUMINAIRES DOUBLE EASY LEDs LIGHT (double sided) GR-390 GR-392 GR-394 Self-testing, maintained (double sided) / LEDs- 100/100lm, 90min 350x134x60mm Self-testing, maintained (double sided) / LEDs- 100/100lm, 3h 350x134x60mm For CBS 230V (double sided) / LEDs - 100lm 350x134x60mm 923390000 923392000 923394000 IP 40 ACCESSORIES FOR EASY LEDs LIGHT & DOUBLE EASY LEDs LIGHT A-3016 A-3018 C-101 Recess mounting base Suspended ceiling mounting springs Protective metallic grid 250x460x100mm 927301600 980330180 980310100 SP-114 S-31100 Double sided marking panel (PVC 6mm) Exit sticker 280x110mm 922114000 807310000 The self-adhesive legends below can be provided after order SP-114 A-3016 S-31100/S65L S-31100/S65R S-31100/S65D Self-adhesive legend contained in the package A-3018 ACCESSORIES FOR DOUBLE EASY LIGHT A-100 Extension rod 40cm for Double Easy Light 927010000 Á-2CRV Set of two convex diffusers (& button) 927000001 Á-2CRV/OPAL Set of two convex diffusers OPAL (& button) 927000003 (After order) A-100 Extension rod 40cm 40 CEILING MOUNTED WALL MOUNTED Special accessory used for mounting and installation purposes. This accessory is included in the package. It is fastened on the suitable notches and has space for the connection terminal and cable. 11

EMERGENCY LUMINAIRES FOR INTERIOR USE WITH LEDS The luminaires of the Comfort LEDs Light series were designed to be easily recess mounted in suspended ceilings. EMERGENCY LUMINAIRES WITH POWER LEDs COMFORT LEDs LIGHT GR-408/3L GR-408/6L GR-409/3L GR-409/6L GR-414/3L GR-414/6L Non-maintained / LEDs - 75lm, 90min. Non-maintained / LEDs - 150lm, 2h Non-maintained / LEDs - 75lm, 4h Non-maintained / LEDs - 150lm, 3h For CBS (230V) / LEDs - 75lm For CBS (230V)/ LEDs - 150lm 272x122x50mm 272x122x50mm 272x122x50mm 272x122x50mm 272x122x50mm 272x122x50mm 923408004 923408005 923409003 923409006 923414003 923414006 IP 42 SELF-TESTING EMERGENCY LUMINAIRES WITH POWER LEDs COMFORT LEDs LIGHT GR-421/3L GR-421/6L GR-423/3L GR-423/6L Self-testing, maintained / LEDs - 75/75lm, 2h. Self-testing, maintained / LEDs - 75/150lm, 2h. Self-testing, maintained / LEDs - 75/75lm, 4h. Self-testing, maintained / LEDs - 75/150lm, 3h. 272x122x50mm 272x122x50mm 272x122x50mm 272x122x50mm 923421003 923421002 923423003 923423005 IP 42 ACCESSORIES Á-3018 Suspended ceiling mounting springs 980330180 SP-115 Double sided marking panel ( PVC 6mm.) 922115000 S-10800 Exit sticker 195x90mm for Comfort Light series 807108000 SP-115 Á-3018 Define during the order of the sign SP-115 the required direction: left, right or down. The self-adhesive legends below can be provided after order S-10800/S65L S-10800/S65R S-10800/S65D The base of the Weather LEDs Light series is constructed from durable 3mm ABS material and the diffuser from high-impact strength polycarbonate. WATERPROOF EMERGENCY LUMINAIRES WITH POWER LEDs WEATHER LEDs LIGHT GR-935/4P GR-935/6P GR-936/4P GR-936/6P Non-maintained / LEDs -250lm / 90min. Non-maintained / LEDs -400lm / 90min. Non-maintained / LEDs -250lm / 3h. Non-maintained / LEDs -400lm / 3h. 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 923935010 923935011 923936005 923936006 IP 65 SELF-TESTING EMERGENCY LUMINAIRES WITH POWER LEDs WEATHER LEDs LIGHT GR-9/4P GR-9/6P GR-939/4P GR-939/6P Self-testing, maintained / LEDs -125/250lm, 90min. Self-testing, maintained / LEDs -200/400lm, 90min. Self-testing, maintained / LEDs - 125/250lm / 3h. Self-testing, maintained / LEDs - 200/400lm / 3h. 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 9239003 9239004 923939007 923939008 IP 65 ACCESSORIES C-101 S-93593 Metallic protective grid 250x460x100mm Exit sticker 260x120mm (waterproof) 980310100 705693593-5 The self-adhesive legends below can be provided after order C-101 12 S-93593/S65L (705693593) S-93593/S65R (705693595) S-93593/S65D (705693594)

EDGE ILLUMINATION SIGNS WITH LEDs Special high luminosity LEDs Ideal for hung installation Great LED life span (100.000 hours) Produced in accordance with: EN 60598-1, Friendly towards the environment EN60598-2-22, EN 1836 The edge illumination signs use a technology that is friendly towards the environment. EDGE ILLUMINATION SIGNS (double sided) from the ECO LIGHT series with green background & white LEDs TYPE DESCRITPION DIMENSIONS (LxWxH) CODE PRICE MLD-28D/w Edge illum. sign, maintained / 12 LEDs - 72/72lm, 3h. 283x130x25mm 922502811 MLD-28D/w/90 Edge illum. sign, maintained / 12 LEDs - 72/72lm, 90min. 283x130x25mm 922502827 MLD-34D/w MLD-44D/w Edge illum. sign, maintained / 15 LEDs - 90/90lm, 3h. Edge illum. sign, maintained / 15 LEDs - 90/90lm, 3h. 343x200x25mm 443x250x25mm 922503426 922504417 IP 40 EDGE ILLUMINATION SIGNS (double sided) from the ECO LIGHT series with transparent background & green LEDs TYPE DESCRITPION DIMENSIONS (LxWxH) CODE PRICE MLD-28S/g Edge illumination sign, maintained / LEDs - 18/18lm / 3h. 283x130x25mm 922502800 MLD-28S/g/90 Edge illumination sign, maintained / LEDs - 18/18lm / 90min. 283x130x25mm 922502826 MLD-34S/g MLD-44S/g Edge illumination sign, maintained / LEDs - 18/22lm / 3h. Edge illumination sign, maintained / LEDs - 18/22lm / 3h. 343x200x25mm 443x250x25mm 922503400 922504400 IP 40 EDGE ILLUMINATION SIGNS FOR CBS 230V AC (double sided) from the ECO LIGHT series TYPE DESCRITPION DIMENSIONS (LxWxH) CODE PRICE DLD-28/CBS/g Edge illumination sign for CBS (230V), LEDs (green)- 18lm DLD-34/CBS/g Edge illumination sign for CBS (230V), LEDs (green)- 22lm DLD-28/CBS/w Edge illumination sign for CBS (230V), LEDs (white)- 72lm DLD-34/CBS/w Edge illumination sign for CBS (230V), LEDs (white)- 90lm 283x130x25mm 343x200x25mm 283x130x25mm 343x200x25mm 922202801 922203401 922202800 922203400 IP 40 ACCESSORIES FOR LUMINAIRES ECO LIGHT (after order) TYPE DESCRITPION CODE PRICE A-1022 A-1025 A-1026 A-1027 A-1018 A-1020 Set for ceiling installation suitable for 20 cm distance Set for ceiling installation suitable for 40 cm distance Set for ceiling installation suitable for 60 cm distance Set for ceiling installation with chain up to 50 cm Recess mounting base suitable for MLD 28, DLD 28 Recess mounting base suitable for MLD 34, DLD 34 927102200 927102500 927102600 927102700 980210180 980210200 A-1021 Recess mounting base suitable for MLD 44 980210210 A-1018 * Ìarking overlay contained in the package. See also page 14. * Accessories contained in the package. Suitable for wall and ceiling mounting.. IP 40 13

EDGE ILLUMINATION SIGNS WITH LEDs The edge illumination signs use a technology that is friendly towards the environment They can also be recess mounted on a suspended ceiling using the mounting springs contained in the package. EDGE ILLUMINATION SIGNS from the LOUNGE LIGHT series (double sided) SLD-28/SP SLD-34/SP SLD-44/SP SLD-64/SP SLD-28/CBS/SP SLD-34/CBS/SP SLD-44/CBS/SP SLD-64/CBS/SP Self-testing, maintained / 12 LEDs -72/72lm, 3h. Self-testing, maintained / 15 LEDs -90/90lm, 3h. Self-testing, maintained / 15 LEDs -90/90lm, 3h. Self-testing, maintained / 27 LEDs -160/90lm, 3h. Edge illumination sign for CBS / 12 LEDs- 72lm Edge illumination sign for CBS / 15 LEDs- 90lm Edge illumination sign for CBS / 15 LEDs- 90lm Edge illumination sign for CBS / 27 LEDs- 160lm 289x180x34mm 343x250x34mm 443x300x34mm 643x350x65mm 289x180x34mm 343x250x34mm 443x300x34mm 643x350x65mm 922028008 922034009 922044006 922064004 922028009 922034010 922044007 922064003 IP 30 SLD-28/DZ SLD-34/DZ SLD-44/DZ SLD-28/CBS/DZ SLD-34/CBS/DZ SLD-44/CBS/DZ SLD-64/CBS/DZ Self-testing, maintained / 12 LEDs -72/72lm, 3h. Self-testing, maintained / 15 LEDs -90/90lm, 3h. Self-testing, maintained / 15 LEDs -90/90lm, 3h. Edge illumination sign for CBS / 12 LEDs- 72lm Edge illumination sign for CBS / 15 LEDs- 90lm Edge illumination sign for CBS / 15 LEDs- 90lm Edge illumination sign for CBS / 27 LEDs- 160lm 289x180x34mm 343x250x34mm 443x300x34mm 289x180x34mm 343x250x34mm 443x300x34mm 643x350x65mm 922028000 922034000 922044000 922028003 922034004 922044003 922064002 IP 30 ACCESSORIES FOR LUMINAIRES LOUNGE LIGHT (after order) A-1079 10cm extension rod 508000104 A-1080 A-1081 10cm extension rod 20cm extension rod 927310800 927310810 A-1082 A-1083 40cm extension rod Connection tie 927310820 927310830 MARKING OVERLAY from the ECO LIGHT & LOUNGE LIGHT series SW28/R SW28/D SW34/R SW34/D SW44/R SW44/D Marking overlay with left / right indication for MLD 28 Marking overlay with down indication for MLD 28 Marking overlay with left / right indication for MLD 34 Marking overlay with down indication for MLD 34 Marking overlay with left / right indication for MLD 44 Marking overlay with down indication for MLD 44 *Ìarking overlay contained in the package. Please define during the order the type of sign. 812010028 812010228 812010034 812010234 812010044 812010244 Capability of extension for SLD-XX/SP Special extension rods Á-1080 (10cm), Á- 1081 (20cm), A-1082(40cm) an A-1083 (connection tie) can be used in recess or A-1081 surface mounted suspended ceiling installations, after order. A-1082 A-1083 A-1079 14

EDGE ILLUMINATION SIGNS WITH LEDs The self-testing luminaires are suitable for large modern buildings where a large number of reliable luminaires with a minimum maintenance cost are required. A very sophisticated, high technology microprocessor monitors and measures all basic operation circuitry, essential for the good operation of the luminaires. SELF-TESTING EDGE ILLUMINATION SIGNS from the ECO LIGHT series WITH ALUMINIUM PROFILE ZLD-28 ZLD-34 ZLD-44 Self-testing, maintained / 18 LEDs -110/110lm, 3h. Self-testing, maintained / 21 LEDs -125/110lm, 3h. Self-testing, maintained / 24 LEDs -145/110lm, 3h. 290x152xmm 350x222xmm 450x272xmm 922502851 922503452 922504450 IP 40 EDGE ILLUMINATION SIGNS FOR CBS from the ECO LIGHT series WITH ALUMINIUM PROFILE ZLD-28/CBS ZLD-34/CBS ZLD-44/CBS Edge illumination sign for CBS / 18 LEDs- 110lm Edge illumination sign for CBS / 21 LEDs- 125lm Edge illumination sign for CBS / 24 LEDs- 145lm 290x152xmm 350x222xmm 450x272xmm 922502852 922503451 922504451 MARKING OVERLAY Marking overlay contained in the package. Please define during the order the type of sign. *See also page 14 for the Eco Light series. Left or Right Down SW28/R ----- (for ÆLD-28) ----- SW28/D SW34/R ----- (for ÆLD-34) ----- SW34/D SW44/R ----- (for ÆLD-44) ----- SW44/D Ceiling mounting and hanging installation s capability Suitable for aircrafts, big stores, super markets and in general, large area which multifacted and long distance's visibility is required. EMERGENCY INDICATION LUMINAIRES FOR INTERIOR USE WITH LEDs from the 3D LIGHT LEDs series GR-415/4P GR-416/4P GR-424/4P Self-testing, maintained / LEDs - 125/250lm, 90min. Self-testing, maintained / LEDs - 125/250lm, 3h. For CBS (230V) / LEDs - 360lm 310x310x320mm 310x310x320mm 310x310x320mm 923415001 923416001 923424001 IP 40 15

EMERGENCY INDICATION LUMINAIRES WITH LEDs The sizes that are available renders them suitable for Alternatively they can be hung on a ceiling, using the large areas and for viewing distances ranging from 18 optional accessory which can be ordered. metres to 64 metres. (The luminaires from the LIGHT BOX LEDs series can The package contains all the accessories that are be produced with fluorescent lamps.) required so the luminaire can be flag mounted on a wall, or ceiling mounted with double sided marking capabilities. SELF-TESTING EMERGENCY INDICATION LUMINAIRES from the LIGHT BOX LEDs series GRL-514 GRL-522 GRL-526 GRL-532 GRL-534 GRL-542 GRL-544 Self-testing, maintained (double sided) / LEDs - 280/140lm, 3h. Self-testing, maintained (double sided) / LEDs - 420/210lm, 90min. Self-testing, maintained (double sided)) / LEDs - 420/210lm, 3h. Self-testing, maintained (double sided) / LEDs - 560/280lm, 90min. Self-testing, maintained (double sided) / LEDs - 560/280lm, 3h. Self-testing, maintained (double sided) / LEDs - 700/350lm, 90min. Self-testing, maintained (double sided) / LEDs - 700/350lm, 3h. 280x145x84mm 410x240x84mm 410x240x84mm 500x262x84mm 500x262x84mm 655x377x84mm 655x377x84mm 923514100 923522100 923526100 923532100 923534100 923542100 923544100 CODE IP 42 SELF-TESTING EMERGENCY INDICATION LUMINAIRES FOR CBS (230V AC) LIGHT BOX LEDs GRL-550 GRL-560 GRL-570 GRL-580 For CBS (double sided) / LEDs - 280lm For CBS (double sided) / LEDs - 420lm For CBS (double sided) / LEDs - 560lm For CBS (double sided) / LEDs - 700lm 280x145x84mm 923550100 410x240x84mm 500x262x84mm 655x377x84mm 923560100 923570200 923580200 IP 42 SPECIAL MODELS (Single sided for wall mounting) TYPE GRL-XXX/O DESCRIPTION All of the above models can be constructed as single sided luminaires with black plate ACCESSORIES (after order) Á-1121 Accessory set used for ceiling hanging 927311210 A-1079 10 cm extension rod 508000104 MARKING OVERLAY FOR LIGHT BOX LEDs (a pair contained in the package). Please define during the order the type of legend you require using the codes S65L S65R S65U S65D EXIT EXIT EXIT EXIT S60L S60R S60U S60D After order A-1079 10 cm Extension rod A-1091. Wall or ceiling mounting accessories included in the package. Á-1121 16

EMERGENCY INDICATION LUMINAIRES WITH LEDs They were designed for areas that require Their size makes them suitable for viewing at greater maintained emergency luminaires with indication distances. markings. (The luminaires from the PROJECT LEDs LIGHT They can be wall mounted or hung from the ceiling series can be produced with fluorescent lamps.) and have double sided indication marking capabilities. SELF-TESTING EMERGENCY INDICATION LUMINAIRES from the PROJECT LEDs LIGHT series GRL-822 GRL-824 GRL-832 GRL-834 GRL-842 GRL-844 Self-testing, maintained (double sided) / LEDs - 420/210lm, 90min. Self-testing, maintained (double sided) / LEDs - 420/210lm, 3h. Self-testing, maintained (double sided) / LEDs - 560/280lm, 90min. Self-testing, maintained (double sided) / LEDs - 560/280lm, 3h. Self-testing, maintained (double sided) / LEDs - 700/350lm, 90min. Self-testing, maintained (double sided) / LEDs - 700/350lm, 3h. 0x260x50mm 0x260x50mm 480x320x50mm 480x320x50mm 630x400x50mm 630x400x50mm 9222100 9224100 9232100 9234100 9242100 9244100 IP 42 SELF-TESTING EMERGENCY INDICATION LUMINAIRES FOR CBS (230V AC) PROJECT LEDs LIGHT GRL-860 GRL-870 GRL-880 For CBS (double sided) / LEDs - 420lm For CBS (double sided) / LEDs - 560lm For CBS (double sided) / LEDs - 700lm 0x260x50mm 480x320x50mm 630x400x50mm 9260300 9270100 9280100 IP 42 SPECIAL MODELS (Single sided for wall mounting) TYPE GRL-XXX/O DESCRIPTION All of the above models can be constructed as single sided luminaires with a back plate. ACCESSORIES (after order) A-1079 10 cm Extension rod 508000104 A-1081 A-1082 20 cm Extension rod 40 cm Extension rod 927310810 927310820 A-1086 Metallic ceiling-mounting rosette (device terminal) 927108600 ACCESSORIES (contained in the package) A-1090 Set accessories for installation suitable for Project Light 927109000 A-1080 Extension rod 10 cm with ceiling eyelet 927210800 A-1083 Connection tie 927310830 A-1084/SL Plastic base for flag mounting (silver) 801567864 A-1085/SL Plastic base for ceiling mounting (device terminal, silver) 801567862 A-1087/SL Plastic base for wall mounting (silver) 8019862 SELF-ADHESIVE LEGENDS FOR LUMINAIRES PROJECT LIGHT (a pair contained in the package) Please define (during the order) the required type of legend Using the codes. S65L S65R S65U S65D EXIT EXIT EXIT EXIT S60L S60R S60U S60D A-1079 A-1086 A-1082 A-1081 *A-1090 SET CONTAINED IN THE PAKCAGE. Á-1080, Á-1083, Á-1084/SL, Á- 1085/SL & Á-1087/SL ARE INCLUDED. Á-1087/SL Á-1085/SL A-1080 S-1083 Á-1084/SL A-1090 17

EMERGENCY LUMINAIRES WITH LEDs Suitable for installations in areas, where the indications must be visible from several sides and from greater distances. SELF-TESTING EMERGENCY LUMINAIRE from the RECT LIGHT LEDs series (3sided) TYPE DESCRIPTION DIMENSIONS (LxWxH) CODE PRICE GR-736/21L Self-testing, maintained / LEDs - 150/150lm, 3h. 350x127x85mm 923736021 IP 20 EMERGENCY LUMINAIRE FOR CBS from the RECT LIGHT LEDs series (3sided) TYPE DESCRIPTION DIMENSIONS (LxWxH) CODE PRICE GR-736/21L/12-24V Luminaire for CBS / LEDs - 150lm, 12-24V AC/DC 350x127x85mm 923736003 IP 20 *Self-adhesive legend contained in the package The Spot Light series consists of emergency luminaires which can be either surface or recess mounted on ceilings. They are IP 65 class rated and can be used in exterior applications. WATERPROOF, SELF-TESTING, NON-MAINTAINED CEILING MOUNTED LUMINAIRES WITH LEDs GR-90 GR-95 GR-96 Waterproof, self-testing, non-maintained / 1W LED - 60lm, 3h. Waterproof, self-testing, non-maintained / 20 LEDs - 120lm, 3h. Waterproof, self-testing, non-maintained / 40 LEDs - 240lm, 90min. 923090001 923095000 923096000 IP 65 NON-MAINTAINED CEILING MOUNTED LUMINAIRES WITH LEDs GR-90/3L Non-maintained, ceiling mounted luminaire / LEDs / 90min. 923090004 WATERPROOF CEILING MOUNTED LUMINAIRES WITH LEDs FOR CBS from the Spot Light series GR-94 Waterproof, ceiling mounted luminaire for CBS 110-240V AC-DC/1W LED - 90lm 923094000 GR-286 Waterproof, ceiling mounted luminaire for CBS 110-240V AC-DC/ 20 LEDs - 120lm 923286000 GR-287 Waterproof, ceiling mounted luminaire for CBS 110-240V AC-DC/ 40 LEDs - 240lm 923287000 IP 65 TELECOMMANDER UP TO 100 LUMINAIRES NET LIGHT The GR-51 & GR-51/A are emergency luminaire control units. They can control up-to 100 luminaires. They used to control the luminaires only during a mains power failure. All luminaires are connected on a 2 wire control line. The user can turn them OFF if required during the day, or ON when desired during a power failure. All models of emergency luminaires can be constructed to cooperate (after order) with the GR-51 & GR-51/A. Remote ON/OFF. For good emergency operation (TEST) and permanent deactivation of emergency lighting (INHIBIT). TELECOMMANDER UP TO 100 LUMINAIRES NET LIGHT GR-51 GR-51/A TYPE DESCRIPTION DIMENSIONS (LxWxH) CODE PRICE GR-51 Telecommander (up to 100 luminaires) 90x70x60mm 923051000 GR-51/Á Telecommander (up to 100 luminaires) inhibit 90x70x60mm 923051001 IP 43 18

LAMPS WITH LEDs SPOT LIGHT 12V Slave luminaire GR-82/12V with 3 LEDs (warm white) - Opening required for installation on a suspended ceiling 66mm. Suitable for installation on a suspended ceiling, with accessory contained in the package. A rossete included in the package, which is available in three types : Á-82/Ni, A-82/G or Á-82/SL. Please define during the order the desired type. (Also available as replacement parts). 12V SLAVE LUM. WITH 3 LEDs (warm white) FOR SUSPENDED CEILING & CONNECTION WITH CONVERTER GR-82/12V 12V AC/DC Slave lum. suitable for suspended ceiling & connection with converter 923082003 GR-82/12V/SQ 12V AC/DC Slave lum. suitable for suspended ceiling & connection with converter 923082008 GR-76-1 Electronic converter, input 230V AC, output 12V - 3W for the GR-82/12V lum. 960076001 IP 40 GR-82/12V SET OF GR-82/12V WITH ELEC. CONVERTER GR-76-1 & BATTERY 3.6V / 1000mA KIT-76/82 Set of GR-76-1 converter with the GR-82/12V slave luminaire with LEDs(warm white) 923082004 A SET OF 5 PCS. GR-82/12V PROVIDED WITH THE CONVERTER GR-79 KIT-79/82 A set of 5 pcs. GR-82/12V provided with the converter GR-79 923082005 CONVERTER 12V AC-DC FOR LAMPS LEDs UP TO 15W GR-79 Converter 12V AC-DC for lamps LEDs up to 15W 980307900 IP 20 ACCESSORIES - Rosettes for GR-82/12V & GR-82/12V/SQ ROUNDED TYPE A-82/G A-82/SL A-82/Ni COLOUR CODE Gold 927082000 Silver-pink pearlescent 927082001 Nickel 927082002 SQUARE TYPE A-82/G/SQ A-82/SL/SQ A-82/W/SQ COLOUR CODE Gold 927082003 Silver-pink pearlescent 927082004 White 927082005 A-82/G A-82/SL A-82/Ni *In the price of GR-82/12V included one of the rosettes above. Please define during the order the type you require using the codes. A-82/ G/SQ A-82/ SL/SQ A-82/ W/SQ GR-82/12V/SQ LAMPS WITH LEDs - CONVERTERS The lamps with LEDs can be mounted on any conventional spot lamp mounting base 50mm. 12V AC/DC LAMPS WITH LEDs OF HIGH LUMINOSITY, 51 x 30mm, from the SPOT- CONVERTER LIGHT series TYPE 9 LEDs colour Light output CODE PRICE TYPE 9 LEDs colour Light output CODE PRICE GR-85/4L white 100lm. 923085004 GR-88/R Red 7lm. 923088004 GR-88/W White 55 lm. 923088000 GR-88/Y Yellow 3lm. 923088003 GR-88/G Green 14lm. 923088001 GR-88/B Blue 5lm. 923088002 ELECTRONIC CONVERTER COMMON TO EMERGENCY LUMINAIRE WITH EXTERNAL BATTERY (e.g. GR-88) GR-76-1 GR-78 El. converter, input 230V AC, output 12V - 3W for the GR-82/12V luminaire Electronic converter for CBS for 1-8 lamps LEDs 960076001 960078000 19

RECHARGEABLE LUMINAIRES & BACK UP LIGHTING Rechargeable luminaire with Ni-MH 3.6/120mÁh battery GR-82/230V & GR-82/WP/230V. ON-OFF touch button & & 3 hours duration,. night light. Suitable for installation in standarized electrical switch boxes. RECHARGEABLE LUMINAIRE with 3 LEDs (cool white)battery 3.6V/120mAh &3 HOURS DURATION GR-82/230V Rechargeable luminaire with 3.6V/120mAh battery /3 LEDs - 20lm /3h. 923082001 GR-82/230V/SQ Rechargeable luminaire with 3.6V/120mAh battery /3 LEDs - 20lm /3h. 923082006 WATERPROOF, RECHARGEABLE with 3 LEDs (cool white)battery 3.6V/120mAh & 3 HOURS DURATION GR-82/WP/230V GR-82/WP/230V/SQ Waterproof, rechargeable with 3.6V/120mAh bat. /3 LEDs - 20lm /3h. 923082002 Waterproof, rechargeable with 3.6V/120mAh bat. /3 LEDs - 20lm /3h. 923082009 IP 40 IP 65 ACCESSORIES - Rosettes for GR-82/12V & GR-82/12V/SQ ROUNDED TYPE A-82/G A-82/SL A-82/Ni COLOUR CODE Gold 927082000 Silver-pink pearlescent 927082001 Nickel 927082002 SQUARE TYPE A-82/G/SQ A-82/SL/SQ A-82/W/SQ COLOUR CODE Gold 927082003 Silver-pink pearlescent 927082004 White 927082005 A-82/G A-82/SL A-82/Ni TYPE DESCRIPTION CODEPRICE GR-83 *In the price of GR-82/12V included one of the rosettes above. Please define during the order the type you require using the codes. Non-maintained, wall mounted, 4 LEDs white - 25lm. / 3h. A-82/ G/SQ 923083001 A-82/ SL/SQ NON-MAINTAINED, WALL MOUNTED LUMINAIRE WITH BATTERY 3,6V/120mAh & 3 HOURS DURATION A-82/ W/SQ IP 40 *Accessory contained in the package : protective grid suitable for installing the luminaires from the Weather Spot Light series, in stairs. The luminaires from the Weather Spot Light series are mounted in standardized electrical switch boxes, suitable for plaster boards. All types are water-proof with an IP rating of 65, and can be used in external areas. WATERPROOF WALL MOUNTED LUMINAIRES WITH 9 LEDs from the WEATHER SPOT LIGHT series TYPE 9 LEDs LIGHT TYPE 9 LEDs LIGHT COLOUR CODE PRICE COLOUR CODE OUTPUT OUTPUT GR-80/W White 55lm. 923080001 GR-80/G Green 14lm. 923080010 GR-80/W/SL White 55lm 923080002 GR-80/R Red 7lm. 923080011 GR-80/B Blue 5lm. 923080003 GR-80/Y Yellow 3lm. 923080009 PRICE IP 65 12V DC SLAVE WALL MOUNTED LUMINAIRES WITH 9 LEDs from the SPOT LIGHT series TYPE 9 LEDs LIGHT TYPE 9 LEDs LIGHT COLOUR CODE PRICE OUTPUT COLOUR OUTPUT GR-81/W White 55lm. 923081001 GR-81/G Green 14lm. GR-81/W/SL White 55lm 923081002 GR-81/R Red 7lm. GR-81/B Blue 5lm. 923081004 GR-81/Y Yellow 3lm. CODE 923081006 923081008 923081007 PRICE IP 40 *The GR-80/W/SL & GR-81/W/SL are in silver case The Home Light luminaires are innovative idea in domestic lighting. They can be used as emergency luminaires, as rechargeable torches and as night lights. PORTABLE RECHARGEABLE MAINTAINED LUMINAIRE from the HOME LIGHT series, with battery Ni-MH 3.6V/120mAh GR-11 Portable rechargeable maintained, 3.6V/120mAh /5 LEDs -25lm /3h. 60x24x80 mm PORTABLE RECHARGEABLE MAINTAINED LUMINAIRES from the HOME LIGHT series 923011000 GR-59 Portable rechargeable maintained / 11 LEDs- 65lm, 2h. 70x53x225 mm 923059000 GR-60 GR-60/C Portable rechargeable maintained/ 11 LEDs- 65lm, 4-14h. Portable rechargeable maintained/ 11 LEDs- 65lm, 4-14h (silver) 70x53x225 mm 70x53x225 mm 923060000 923060001 GR-68 Portable rechargeable maintained / 6 LEDs- 22lm, 2-5h. 70x53x225 mm 923068000 With extracted base 20

EMERGENCY LIGHTING EMERGENCY LIGHTING WITH FLUORESCENT LAMPS LUMINAIRES FOR INTERIOR USE WATERPOOF LUMINAIRES EMERGENCY AND INDICATION LUMINAIRES FOR INTERIOR USE ANTI-EXPLOSIVE TYPE EMERGENCY LUMINAIRES

EMERGENCY LUMINAIRES FOR INTERIOR USE EMERGENCY LUMINAIRES from the SLIM LIGHT series GR-8 GR-9 Non-maintained / fluo. 6W, 90min. Non-maintained / fluo. 6W, 3h. 246x76x42mm 246x76x42mm 923008000 923009000 IP 20 ACCESSORIES FOR LUMINAIRES SLIM LIGHT S-00800 Exit sticker 215x65 mm for the Slim Light luminaires 807008000 A-8/OPAL Diffuser opal for Slim Light 927008000 The self-adhesive legends below can be provided after order Self-adhesive legend contained in the package S-00800/S65L S-00800/S65R S-00800/S65D LOW PROFILE MAINTAINED / NON-MAINTAINED (OPTIONAL) LUMINAIRES SLIM CLASSIC LIGHT GR-1006/90 GR-1006/180 Maintained (non-maintained) / fluo. 6W, 90min. Maintained (non-maintained) / fluo. 6W, 3h. 260x100x51mm 260x100x51mm 923100605 923100606 IP 20 ACCESSORIES FOR LUMINAIRES SLIM CLASSIC LIGHT S-10060 Exit sticker 240x95mm for Slim Classic Light luminaires 807100600 The self-adhesive legends below can be provided after order Self-adhesive legend contained in the package S-10060/S65L S-10060/S65R S-10060/S65D EMERGENCY LUMINAIRES from the CLASSIC LIGHT series DIMENSIONS (LxWxH) GR-108 GR-109 GR-119 GR-151-3 GR-130 GR-105 GR-106 Non-maintained / fluo. 6W, 90min. Non-maintained / fluo. 6W, 3h. Non-maintained / fluo. 6W, 90min. (for elevators) Non-maintained / fluo. 6W, 3h. (for ships) Luminaire for CBS/ fluo. 6W, with electr. ballast (230V) Maintained / fluo. 6W, 90min. Maintained / fluo. 6W, 3h. 260x100x70mm 260x100x70mm 260x100x70mm 260x100x70mm 260x100x70mm 260x100x70mm 260x100x70mm 923108000 923109000 923119000 923151001 923130000 923105000 923106000 IP 20 Á-1015 ACCESSORIES FOR LUMINAIRES CLASSIC LIGHT Á-1015 C-102 S-10800 Recess mounting base for the Classic Light series Protective metallic grid 160x330x80mm Exit sticker 195x90mm for Classic Light & Comfort Light luminaires 927101500 980310200 807108000 The self-adhesive legends below can be provided after order Self-adhesive legend contained in the package S-10800/S65L S-10800/S65R S-10800/S65D 22

EMERGENCY LUMINAIRES FOR INTERIOR USE EMERGENCY LUMINAIRES from the EASY LIGHT series GR-310 Non-maintained / fluo. 8W, 90min. 350x134x45mm GR-310/2 Non-maintained / fluo. 2x8W, 90min. 350x134x45mm GR-312 Non-maintained / fluo. 8W, 3h. 350x134x45mm GR-312/2 Non-maintained / fluo. 2x8W, 3h. 350x134x45mm GR-313 Sustained /fluo. 8+8W, 90min. 350x134x45mm GR-313-3 Sustained /fluo. 8+8W, 3h. 350x134x45mm GR-314 Slave 12-24V AC/DC, fluo. 8W 350x134x45mm GR-315 GR-316 Maintained / fluo. 8W, 90min. Maintained / fluo. 8W, 3h. 350x134x45mm 350x134x45mm GR-324 Luminaire for CBS/ fluo. 8W, with electr. ballast (230V) 350x134x45mm GR-325 Luminaire for CBS/ fluo. 2x8W, with electr. ballast (230V) 350x134x45mm 923310000 923310001 923312000 923312001 923313000 923313001 923314000 923315000 923316000 923324000 923325000 IP 40 ACCESSORIES FOR LUMINAIRES EASY LIGHT A-3016 A-3018 C-101 Recess mounting base for the Easy Light series Suspended ceiling mounting springs for the Easy Light series Protective metallic grid for Easy LIght series 250x460x100mm 927301600 980330180 980310100 SP-114 S-31100 Double sided marking panel (PVC 6mm) for Easy Light Exit sticker 280x110mm for Easy Light 922114000 807310000 The self-adhesive legends below can be provided after order SP-114 A-3016 S-31100/S65L S-31100/S65R S-31100/S65D Self-adhesive legend contained in the package A-3018 The luminaires in the family ranges of Easy Light can be produced with two new convex diffusers, a transparent and an opal type. EMERGENCY LUMINAIRES from the EASY LIGHT CRV series, with newly designed convex diffuser GR-310/CRV/OPAL Non-maintained / fluo. 8W, 90min. 362x134x58mm 923310008 GR-310/CRV/OPAL/SL Non-maintained / fluo. 8W, 90min.(silver) 362x134x58mm 923310013 GR-312/CRV/OPAL Non-maintained / fluo. 8W, 3h. 362x134x58mm 923312006 GR-312/CRV/OPAL/SL Non-maintained / fluo. 8W, 3h. (Silver case) 362x134x58mm 923312010 IP 40 The types A-CRV and A-CRV/OPAL are suitable for the series Easy Light, Easy LEDs Light. The types A-2CRV and A-2CRV/OPAL are suitable for the series Double Easy Light. ACCESSORIES - New convex design diffusers. Transparent (CRV) and semi-transparent (OPAL) Á-CRV Á-CRV/OPAL Á-2CRV Á-2CRV/OPAL Convex diffuser (& button) Convex diffuser (OPAL) (& button) Set of two convex diffusers (& button) Set of two convex diffuser (OPAL) (& button) 927000000 927000002 927000001 927000003 Á-CRV Á-CRV/OPAL 23

EMERGENCY LUMINAIRES FOR INTERIOR USE The self-testing intelligent luminaires are suitable for large modern buildings where a large number of reliable luminaires with a minimum maintenance cost are required. A very sophisticated, high technology microprocessor monitors and measures all basic operation circuitry, essential for the good operation of the luminaires. A continuous battery test, a lamp test twice a month TEST button is used to manually active all automatic test and a half-yearly full duration test. modes, if and when required. Automatically and without any interventions, three tests are carried out. They have 3 indications LEDs used to show the luminaires operation or fault status. The incorporated SELF-TESTING EMERGENCY LUMINAIRES from the INTELLIGENT EASY LIGHT series GR-601 GR-602 GR-605 GR-606 Self-testing, non-maintained/ fluo. 8W, 90min. Self-testing, non-maintained/ fluo. 8W, 3h. Self-testing, maintained/ fluo. 8W, 90min. Sefl-testing, maintained/ fluo. 8W, 3h. 350x134x45mm 350x134x45mm 350x134x45mm 350x134x45mm *For more accessories from the INTELLIGENT EASY LIGHT series see also page 23. 923601000 923602000 923605000 923606000 IP 40 EMERGENCY LUMINAIRES from the DOUBLE EASY LIGHT series (double sided) GR-0 GR-2 GR-4 GR-6 GR-8 Non-maintained (double sided) / fluo. 8W, 90min Non-maintained (double sided) / fluo. 8W, 3h Maintained (double sided) / fluo. 8W, 90min Maintained (double sided) / fluo. 8W, 3h Luminaire for CBS, fluo. 8W, with electronic ballast (230V) 350x134x60mm 350x134x60mm 350x134x60mm 350x134x60mm 350x134x60mm 9230000 9232000 9234000 9236000 9238000 IP 40 ACCESSORIES FOR LUMINAIRES DOUBLE EASY LIGHT A-100 Extension rod 40cm for Double Easy Light 927010000 S-31100 Exit sticker for Double Easy Light 807310000 Á-2CRV Á-2CRV/OPAL Set of two convex diffusers (& button) Set of two convex diffusers OPAL (& button) 927000001 927000003 The self-adhesive legends below can be provided after order Self-adhesive legend contained in the package S-31100/S65L S-31100/S65R S-31100/S65D 40 (After order) A-100 Extension rod 40cm WALL MOUNTED CEILING MOUNTED Special accessory used for mounting and installation purposes. This accessory is included in the package. It is fastened on the suitable notches and has space for the connection terminal and cable. 24

EMERGENCY LUMINAIRES FOR INTERIOR USE The luminaires from the Comfort Light series were designed to be easily recess mounted in suspended ceilings and walls. EMERGENCY LUMINAIRES from the COMFORT LIGHT series GR-408 GR-408-2 GR-409 GR-421 GR-423 Non-maintained / fluo. 6W, 90min. Non-maintained / fluo. 6W, 2h. Non-maintained / fluo. 6W, 3h. Maintained / fluo. 6W, 90min. Maintained / fluo. 6W, 3h. 272x122x50mm 272x122x50mm 272x122x50mm 272x122x50mm 272x122x50mm 923408000 923408001 923409000 923421000 923423000 IP 42 ACCESSORIES FOR LUMINAIRES COMFORT LIGHT A-3018 Suspended ceiling mounting springs 980330180 SP-115 Double sided marking panel (PVC 6mm.) 922115000 S-10800 Exit sticker 195x90mm for the Slim Classic Light, Classic Light & Comfort Light 807108000 The self-adhesive legends below can be provided after order SP-115 A-3018 S-10800/S65L S-10800/S65R S-10800/S65D Mounting springs Á-3018 Mounting Methods Wall or ceiling mounted Recess mounting springs A-3018 Recess mounted on suspended ceiling Indication panel SP-115 Ceiling mounted with an SP-115 indication panel attached Wall mounted with the SP-115 indication panel EMERGENCY LUMINAIRES from the GLOBAL LIGHT series GR-910 GR-912 GR-912/2 GR-915 GR-916 GR-961 GR-962 GR-922 GR-963 GR-964 Non-maintained / fluo. 8W, 90min. Non-maintained / fluo. 8W, 3h. Non-maintained / fluo. 2x8W, 3h. Maintained / fluo. 8W, 90min. Maintained / fluo. 8W, 3h. Non-maintained / CFL 11W, 90min. Non-maintained / CFL 11W, 3h. Luminaire for CBS / CFL 18W,with electr. ballast (230V) Non-maintained / CFL 18W, 90min Non-maintained / CFL 18W, 3h. 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 340x140x72mm 923910000 923912000 923912001 923915000 923916000 923961000 923962000 923922000 923963000 923964000 IP 40 ACCESSORIES FOR LUMINAIRES GLOBAL LIGHT C-101 Protective metallic grid 250x460x100mm 980310100 S-91100 Exit sticker 260x120mm for Global Light 807910000 The self-adhesive legends below can be provided after order Self-adhesive legend contained in the package S-91100/S65L S-91100/S65R S-91100/S65D C-101 25

EMERGENCY LUMINAIRES FOR INTERIOR USE EMERGENCY LUMINAIRES from the PROFESSIONAL LIGHT series GR-110 GR-110/2 GR-112 GR-112/2 GR-115 GR-116 GR-124 Non-maintained / fluo. 8W, 90min. Non-maintained / fluo. 2x8W, 90min. Non-maintained / fluo. 8W, 3h. Non-maintained / fluo. 2x8W, 3h. Maintained / fluo. 8W, 90min. Maintained / fluo. 8W, 3h. Luminaire for CBS/ fluo. 8W, with electr. ballast (230V) 332x100x74mm 332x100x74mm 332x100x74mm 332x100x74mm 332x100x74mm 332x100x74mm 332x100x74mm 923110000 923110003 923112000 923112001 923115000 923116000 923124000 IP 20 Á-1014 ACCESSORIES FOR LUMINAIRES PROFESSIONAL LIGHT Á-1013 Á-1014 Recess mounting base for the Professional Light series Double sided plastic diffuser for the Professional Light series 927101300 927101400 C-100 Protective metallic grid for Professional Light series 170x400x100mm 980310000 S-11100 Exit sticker 260x80 mm for Professional Light luminaires 807110000 The self-adhesive legends below can be provided after order S-11100/S65L S-11100/S65R S-11100/S65D Self-adhesive legend contained in the package C-100 EMERGENCY LUMINAIRES from the DOUBLE LIGHT series (double sided) GR-511 GR-512 GR-515 GR-516 GR-524 Non-maintained (double sided) / fluo. 8W, 90min. Non-maintained (double sided) / fluo. 8W, 3h. Maintained (double sided) / fluo. 8W, 90min. Maintained (double sided) / fluo. 8W, 3h. For CBS,(double sided)/ fluo. 8W, with el. ballast (230V) 332x205x100mm 332x205x100mm 332x205x100mm 332x205x100mm 332x205x100mm 923511000 923512000 923515000 923516000 923524000 IP 20 ACCESSORIES FOR LUMINAIRES DOUBLE LIGHT Á-1013 S-51100 Recess mounting base for Double Light Exit sticker 310x140mm for Double Light 927101300 807510000 Á-1013 Self-adhesive legend contained in the package S-51100/S65L S-51100/S65R S-51100/S65D S-51100/S65D 26

WATERPROOF EMERGENCY LUMINAIRES WATERPROOF EMERGENCY LUMINAIRES from the HARD GLOBAL LIGHT GR-926/AL GR-927/AL GR-935/AL GR-936/AL GR-937/AL GR-9/AL GR-939/AL Waterproof, for CBS /fluo. 8W (aluminium), with el. ballast 355x160x72mm Waterproof, for CBS /fluo. 2x8W (aluminium), with el. ballast355x160x72mm Waterproof, non-maintained / fluo. 8W, 90min. (aluminium) 355x160x72mm Waterproof, non-maintained / fluo. 8W, 3h. (aluminium) 355x160x72mm Waterproof, non-maintained / fluo. 2x8W, 3h. (aluminium) 355x160x72mm Waterproof, maintained / fluo. 8W, 90min. (aluminium) 355x160x72mm Waterproof, maintained / fluo. 8W, 3h. (áluminium) 355x160x72mm 923926002 923927002 923935004 923936002 923937002 9239002 923939003 IP 65 WATERPROOF EMERGENCY LUMINAIRES from the WEATHER LIGHT GR-926 Waterproof, for CBS /fluo. 8W, with electronic ballast GR-927 Waterproof, for CBS /fluo. 2x8W, with electronic ballast GR-935 Waterproof, non-maintained / fluo. 8W, 90min. GR-936 Waterproof, non-maintained / fluo. 8W, 3h. GR-937 Waterproof, non-maintained / fluo. 2x8W, 3h. GR-9 Waterproof, maintained / fluo. 8W, 90min. GR-939 Waterproof, maintained / fluo. 8W, 3h. GR-961/WP Waterproof, non-maintained / CFL 11W, 90min. GR-962/WP Waterproof, non-maintained / CFL 11W, 3h. 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 923926000 923927000 923935000 923936000 923937000 9239000 923939000 923961001 923962001 IP 65 WATERPROOF SELF-TESTING EMERGENCY LUMINAIRES from the WEATHER LIGHT GR-641 Waterproof,self-testing,non-maintained / fluo. 8W, 90min. 355x160x72mm 923641000 GR-642 GR-643 GR-644 GR-645 GR-646 Waterproof,self-testing,non-maintained / fluo. 8W, 3h. Waterproof,self-testing,sustained / fluo. 8+8W, 90min. Waterproof,self-testing,sustained / fluo. 8+8W, 3h. Waterproof,self-testing,maintained / fluo. 8W, 90min. Waterproof,self-testing,maintained / fluo. 8W, 3h. 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 355x160x72mm 923642000 923643000 923644000 923645000 923646000 IP 65 ACCESSORIES FOR LUMINAIRES HARD GLOBAL LIGHT & WEATHER LIGHT C-101 S-93593 Protective metallic grid 250x460x100mm Exit sticker 260x120mm (waterproof) The self-adhesive legends can be provided after order 980310100 705693593-5 S-93593/S65L (705693593) S-93593/S65R (705693595) S-93593/S65D (705693594) C-101 WATERPROOF EMERGENCY LUMINAIRES from the MAXI LIGHT series LT-211/WP LT-212/WP LT-213/WP LT-214/WP LT-215/WP LT-216/WP Waterproof, non-maintained / fluo. 18W, 90min. Waterproof, non-maintained / fluo. 18W, 3h. Waterproof, maintained/ fluo. 18W, 90min. Waterproof, maintained/ fluo. 18W, 3h. Waterproof, maintained / fluo. 2x18W, 90min. Waterproof, maintained/ fluo. 2x18W, 3h. 660x100x101mm 660x100x101mm 660x100x101mm 660x160x101mm 660x160x101mm 660x160x101mm 924211003 924212002 924213001 924214001 924215001 924216001 IP 65 27

EMERGENCY INDICATION LUMINAIRES FOR INTERIOR USE The three sizes that are available renders them suitable Alternatively they can be hung on a ceiling, using the for large areas and for viewing distances ranging from optional accessories which can be ordered. 18 metres to 64 metres. The package contains all the accessories that are required so the luminaire can be flag mounted on a wall, or ceiling mounted with double sided marking capabilities. SELF-TESTING, EMERGENCY INDICATION LUMINAIRES from the LIGHT BOX series (double sided) GR-522 GR-526 GR-532 GR-534 GR-542 GR-544 Self-testing, maintained (double sided)/ fluo. 8W, 90min. Self-testing, maintained (double sided)/ fluo. 8W, 3h. Self-testing, maintained (double sided)/ fluo. 15W, 90min. Self-testing, maintained (double sided)/ fluo. 15W, 3h. Self-testing, maintained (double sided)/ fluo. 18W, 90min. Self-testing, maintained (double sided)/ fluo. 18W, 3h. 410x240x84mm 410x240x84mm 500x262x84mm 500x262x84mm 655x377x84mm 655x377x84mm 923522000 923526000 923532000 923534000 923542000 923544000 IP 42 EMERGENCY INDICATION LUMINAIRES FOR CENTRAL UNITS from the LIGHT BOX series 230V AC (double sided) GR-560 GR-570 GR-580 For CBS (double sided)/ fluo. 8W, with electronic ballast For CBS (double sided)/ fluo. 15W, with electronic ballast For CBS (double sided)/ fluo. 18W, with electronic ballast 410x240x84mm 500x262x84mm 655x377x84mm 923560000 923570000 923580000 IP 42 SPECIAL MODELS (Single sided for wall mounting) TYPE GR-XXX/O DESCRIPTION All of the above models can be constructed as single sided luminaires with black plate ACCESSORIES (after order) Á-1121 Accessory set used for ceiling hanging 927311210 A-1079 10 cm extension rod 508000104 MARKING OVERLAY FOR LIGHT BOX (a pair contained in the package). Please define during the order the type of legend you require using the codes S65L S65R S65U S65D EXIT EXIT EXIT EXIT S60L S60R S60U S60D After order A-1079 10 cm Extension rod A-1091. Wall or ceiling mounting accessories included in the package. Á-1121 28

EMERGENCY INDICATION LUMINAIRES FOR INTERIOR USE They were designed for areas that require maintained Their size makes them suitable for viewing at greater emergency luminaires with indication markings. distances. They can be wall mounted or hung from the ceiling and have double sided indication marking capabilities. SELF-TESTING EMERGENCY INDICATION LUMINAIRES from the PROJECT LIGHT series (double sided) GR-822 GR-824 GR-832 GR-834 GR-842 GR-844 Self-testing, maintained (double sided)/ fluo. 8W, 90min. Self-testing, maintained (double sided)/ fluo. 8W, 3h. Self-testing, maintained (double sided)/ fluo. 15W, 90min. Self-testing, maintained (double sided)/ fluo. 15W, 3h. Self-testing, maintained (double sided)/ fluo. 18W, 90min. Self-testing, maintained (double sided)/ fluo. 18W, 3h. 0x260x50mm 0x260x50mm 480x320x50mm 480x320x50mm 630x400x50mm 630x400x50mm 9222000 9224000 9232000 9234000 9242000 9244000 IP 42 EMERGENCY LUMINAIRES FOR CENTRAL UNITS from the PROJECT LIGHT series (double sided) GR-860 GR-870 GR-880 For CBS (double sided)/ fluo. 8W, with el.ballast (230V) For CBS (double sided)/ fluo. 15W, with el.ballast (230V) For CBS (double sided)/ fluo. 18W, with el.ballast (230V) 0x260x50mm 480x320x50mm 630x400x50mm 9260100 9270001 9280001 IP 42 SPECIAL MODELS (Single sided for wall mounting) TYPE GR-XXX/O DESCRIPTION All of the above models can be constructed as single sided luminaires with a back plate. ACCESSORIES (after order) A-1079 10 cm Extension rod 508000104 A-1081 A-1082 20 cm Extension rod 40 cm Extension rod 927310810 927310820 A-1086 Metallic ceiling-mounting rosette (device terminal) 927108600 ACCESSORIES (contained in the package) A-1090 Set accessories for installation suitable for Project Light 927109000 A-1080 Extension rod 10 cm with ceiling eyelet 927210800 A-1083 Connection tie 927310830 A-1084/SL Plastic base for flag mounting (silver) 801567864 A-1085/SL Plastic base for ceiling mounting (device terminal, silver) 801567862 A-1087/SL Plastic base for wall mounting (silver) 8019862 SELF-ADHESIVE LEGENDS FOR LUMINAIRES PROJECT LIGHT (a pair contained in the package) Please define (during the order) the required type of legend Using the codes. S65L S65R S65U S65D EXIT EXIT EXIT EXIT S60L S60R S60U S60D A-1079 A-1086 A-1082 A-1081 *A-1090 SET CONTAINED IN THE PAKCAGE. Á-1080, Á-1083, Á-1084/SL, Á- 1085/SL & Á-1087/SL ARE INCLUDED. Á-1087/SL Á-1085/SL A-1080 S-1083 Á-1084/SL A-1090 29

WATERPROOF EMERGENCY LUMINAIRES SUITABLE FOR TUNNELS WATERPROOF LUMINAIRES SUITABLE FOR TUNNELS from the TUNNEL LIGHT series (double sided) GR-577/8W/WP GR-578/8W/WP Waterproof, maintained / fluo. 8W / 90min. Waterproof, maintained / fluo. 8W / 3h. 300x200x105mm 300x200x105mm GR-577/15W/WP Waterproof, maintained / fluo. 15W / 90min. 480x480x105mm GR-578/15W/WP Waterproof, maintained / fluo. 15W / 3h. 480x480x105mm GR-577/18W/WP Waterproof, maintained / fluo. 18W / 90min. 635x635x105mm GR-578/18W/WP Waterproof, maintained / fluo. 18W / 3h. 635x635x105mm GR-576/8W/WP GR-576/15W/WP GR-576/18W/WP Waterproof, for CBS 230V /fluo. 8W Waterproof, for CBS 230V /fluo. 15W Waterproof, for CBS 230V /fluo. 18W 300x200x105mm 480x480x105mm 635x635x105mm GR-57X/XW/WP/B All the above models can be constructed with XENON beacon GR-576/XW/WP/E All models for CBS can be constructed with electronic ballast GR-57X/XW/WP/O All the above models can be constructed as single sided luminaires 923577002 923578002 923577000 923578000 923577003 923578003 923576002 923576000 923576005 IP 65 Dimensions (in mm) 105 635 480 480 635 GR-57X/15W/WP GR-57X/18W/WP Double sided luminaire, flag mounted on a wall with indication of escape point and beacon. Single sided luminaire, wall mounted with indication of distance from escape point. EMERGENCY LUMINAIRES ANTIEXPLOSIVE TYPE These luminaires were designed for operating in Hazardous environments. Certified according to CENELEC EN 500 14/18 for environments: Eex d IIC T6 ANTIEXPOSIVE TYPE EMERGENCY LUMINAIRES from the ANTIEXPLOSIVE TYPE series FSA-8202C Antiexplosive type, non-maintained / fluo. 8W, 60min. FSA-8203C Antiexplosive type, non-maintained / fluo. 8W, 3h. FSA-8352C Antiexplosive type, non-maintained / fluo. 8W, 60min. FSA-2118C Antiexplosive type, non-maintained / fluo. 18W, 60min. FSP-3236CC Antiexplosive type, sustained / fluo. 36W, 60min. 490x157x173mm 490x157x173mm 740x157x173mm 740x157x173mm 1350x157x173mm 980820200 980820300 980835200 980211800 980323601 IP 66 ANTIEXPOSIVE TYPE EMERGENCY LUMINAIRES from the ANTIEXPLOSIVE TYPE series IFA-3236 Antiexplosive type lum. for CBS (230V)/ fluo. 2x36W, (glass) 1350x157x173mm 980323602 IFA-3236P Antiexplosive type lum. for CBS (230V)/ fluo. 2x36W 230V 1350x157x173mm 980323605 IP 66 30

EMERGENCY LIGHTING SPECIAL CATEGORIES CENTRAL BATTERY SYSTEMS CBS ADDRESSABLE EMERGENCY LIGHTING EMERGENCY LUMINAIRES WITH HIGH POWER LIGHT OUTPUT COMMON TO EMERGENCY LUMINAIRE CONVERTER

CENTRAL BATTERY SYSTEMS CBS Full automatic control system with microprocessor. PC programmable installation and customer data. Network capability with up to 64 panels and sub-panels. All errors are recorded in special EEPROM and are Full control over the system (and the sub panels) from retained for 2 years. the central panel. Fully programmable via PC software. Floor standing cabinet with sheet steel and access door. Independent programming in each circuit for nonmaintained or maintained illumination. ~ 230V L GND N Êýêëùìá n Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 20 Êýêëùìá 2 Êýêëùìá 1 Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 20 ~ 230V L GND N Êýêëùìá n Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 20 Êýêëùìá 2 Êýêëùìá 1 ~ 230V L GND N Circuit n Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 20 Circuit 2 Circuit 1 Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 20 Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 20 Each sub-panel can contain from 8 to 64 lighting circuits. DC power from the main panel and AC powered from the mains power supply. The main panel contains a power supply 2.5Amp -20Amp and charger that can charge Ni-Cd batteries with 216V / 150Ah. It can also contain 8 to 64 lighting circuits. The main panel can also be connected to other panels and sub panels in a network of 64 devices. Each lighting circuit can be 3,6 or 8A and can contain up to 20 luminaires. A GR-8192 or GR- 8194 must be connected inline with every luminaire in order to permit each luminaire to have its own address. The communication between the luminaries and the panel is established using the power supply cables. During the automatic tests, each luminaries reports its condition to the panel. 32

CENTRAL BATTERY SYSTEMS CBS COMPLETE CENTRAL TABLE FOR EMERGENCY LIGHTING GR-8100 Complete central table with 8 circuits and power supply of 2.5Á 980808100 CENTRAL TABLES FOR EMERGENCY LIGHTING TYPE CIRCUITS POWER SUPPLY CODE PRICE GR-8110 8 2.5Á 980808110 GR-8111 8 5Á 980808111 GR-8112 8 7.5Á 980808112 GR-8113 16 2.5Á 980808113 GR-8114 16 5Á 980808114 GR-8115 16 7.5Á 980808115 GR-8116 24 2.5Á 980808116 GR-8117 24 5Á 980808117 GR-8118 24 7.5Á 980808118 GR-8119 32 2.5Á 980808119 GR-8120 32 5Á 980808120 GR-8121 32 7.5Á 980808121 GR-8122 32 10Á 980808122 GR-8123 40 2.5Á 980808123 GR-8124 40 5Á 980808124 GR-8125 40 7.5Á 980808125 GR-8126 40 10Á 980808126 GR-8127 40 12.5Á 980808127 GR-8128 40 15Á 980808128 GR-8129 48 980808129 GR-8130 48 5Á 980808130 GR-8131 GR-8132 GR-8133 GR-8134 GR-8135 GR-8136 GR-8137 GR-81 GR-8139 GR-8140 GR-8141 GR-8142 GR-8143 GR-8144 GR-8145 GR-8146 GR-8147 GR-8148 GR-8149 2.5Á GR-8150 48 48 48 48 56 56 56 56 56 56 56 56 64 64 64 64 64 64 64 POWER SUPPLY 7.5Á 10Á 12.5Á 15Á 2.5Á 5Á 7.5Á 10Á 12.5Á 15Á 17.5Á 20Á 2.5Á 5Á 7.5Á 10Á 12.5Á 15Á 17.5Á 20Á TYPE CIRCUITS CODE PRICE 980808131 980808132 980808133 980808134 980808135 980808136 980808137 9808081 980808139 980808140 980808141 980808142 980808143 980808144 64 980808145 980808146 980808147 980808148 980808149 980808150 SUBSTATION MODELS FOR EMERGENCY LIGHTING TYPE CIRCUITS CODE PRICE TYPE CIRCUITS CODE PRICE GR-8160 GR-8161 GR-8162 GR-8163 With 8 circuits With 16 circuits With 24 circuits With 32 circuits 980808160 980808161 980808162 980808163 GR-8164 GR-8165 GR-8166 GR-8167 With 40 circuits With 48 circuits With 56 circuits With 64 circuits 980808164 980808165 980808166 980808167 METALLIC CLOSET FOR BATTERIES TYPE DIMENSIONS CODE PRICE TYPE DIMENSIONS CODE GR-8180 90 x 45 x 60cm 980808180 GR-8182 180 x 45 x 60cm 980808182 PRICE PRINTER FOR CENTRAL BATTERY SYSTEM TYPE DESCRIPTION CODE GR-8190 Printer for central battery system 980808190 PRICE 2 CIRCUIT CARDS TYPE GR-8170 GR-8172 GR-8174 DESCRIPTION Card with 2 circuits of 3Á (2x3A) Card with 2 circuits of 6Á (2x6A) Card with 2 circuits of 8Á (2x8A) CODE 980808170 980808172 980808174 PRICE A GR-8192 or GR-8194 must be connected inline with every luminaire in order to permit each luminaire to have its Own address. (Each lighting circuit can be 3, 6 or 8A and can contain up to 20 luminaires.) ADDRESSABLE INTERFACE FOR LUMINAIRES TYPE GR-8192 GR-8194 GR-8196 DESCRIPTION Addressable module for Luminaires (CBS) Addressable module for Luminaires (CBS with Switcher) Addressable module for Luminaires (CBS) with Switcher and el.ballast 4-13W CODE 980808192 980808194 980808196 PRICE 33

CENTRAL BATTERY SYSTEMS CBS AFTER ORDER CAN BE PRODUCED LUMINAIRES FOR CBS EDGE ILLUMINATION SIGNS for CBS from the series LOUNGE LIGHT SLD-28/CBS/SP SLD-34/CBS/SP SLD-44/CBS/SP Edge illumination sign for CBS / 12 LEDs / 72lm Edge illumination sign for CBS / 15 LEDs / 90lm Edge illumination sign for CBS/ 15 LEDs / 90lm 289x180x34mm 343x250x34mm 443x300x34mm 922028009 922034010 922044007 IP 30 EMERGENCY LUMINAIRES for CBS from the series ECO LIGHT DLD-28/CBS/w DLD-34/CBS/w Edge illumination sign for CBS / 12 LEDs / 72lm Edge illumination sign for CBS / 15 LEDs / 90lm 283x130x25mm 343x200x25mm 922202800 922203400 IP 40 EMERGENCY LUMINAIRES for CBS from the series PROJECT LEDs LIGHT GRL-860 GRL-870 GRL-880 Luminaire for CBS (double sided) / LEDs - 420lm Luminaire for CBS (double sided) / LEDs - 560lm Luminaire for CBS (double sided) / LEDs - 700lm 0x260x50mm 480x320x50mm 630x400x50mm 9260300 9270100 9280100 IP 42 EMERGENCY LUMINAIRES for CBS from the series LIGHT BOX LEDs GRL-560 GRL-570 GRL-580 Luminaire for CBS (double sided) / LEDs - 420lm Luminaire for CBS (double sided) / LEDs - 560lm Luminaire for CBS (double sided) / LEDs - 700lm 410x240x84mm 500x262x84mm 655x377x84mm 923560100 923570200 923580200 IP 42 EMERGENCY LUMINAIRES for CBS from the series 3D LIGHT GR-424/4P Edge illumination sign for CBS / LEDs / 360lm 310x310x320mm 923424001 EMERGENCY LUMINAIRES for CBS from the series WEATHER LIGHT & WEATHER LEDs LIGHT GR-926 GR-927 GR-926/4P GR-927/6P GR-414/3L GR-414/6L Waterproof luminaire for CBS / fluo. 8W with el. ballast 355x160x72mm Waterproof luminaire for CBS / fluo. 2x8W with el. ballast 355x160x72mm EMERGENCY LUMINAIRES for CBS from the series COMFORT LEDs LIGHT 272x122x50mm 272x122x50mm 350x134x45mm 350x134x45mm 350x134x45mm 350x134x45mm 923926000 923927000 923926005 923927003 Luminaire for CBS / LEDs - 75lm Luminaire for CBS / LEDs - 150lm EMERGENCY LUMINAIRES for CBS from the series EASY LIGHT & EASY LEDs LIGHT 923414003 923414006 GR-324 GR-325 GR-324/4P GR-325/6P Waterproof luminaire for CBS /LEDs Waterproof luminaire for CBS / LEDs Luminaire for CBS / fluo. 8W with el.ballast Luminaire for CBS / fluo. 2x8W with el. Ballast Luminaire for CBS / LEDs Luminaire for CBS / LEDs 355x160x72mm 355x160x72mm EMERGENCY LUMINAIRES for CBS from the series DOUBLE EASY LIGHT 923324000 923325000 923324006 923325003 GR-8 Luminaire for CBS (double sided) / fluo. 8W with el. ballast 350x134x60mm 9238000 IP 40 IP 65 IP 42 IP 40 IP 40 EMERGENCY LUMINAIRES for CBS from the series SPOT LIGHT GR-286 GR-287 Waterproof lum. for CBS,ceiling mounted / 20 LEDs / 120lm Waterproof lum. for CBS,ceiling mounted / 40 LEDs / 240lm 120x120x60mm 120x120x60mm 923286000 923287000 IP 65 34

ADDRESSABLE EMERGENCY LIGHTING Batteries Ni-Cd 3,6V Construction material: Bayblend Fr3010 ï Deep-discharge and over charge battery protection Operation temperature range : 0 to 40 C ÔEST button Humidity: up-to 95% relative humidity 3 indication LEDs Produced in accordance with: ÅÍ60598-1, ÅÍ60598- Easily set luminaire address from the panel 2-22 (without micro-switches) The GR-650 is a one loop, 16 zone control panel suitable for addressable luminaires. On the loop can be connected up-to 240 points in total, 208 of which can be luminaires or isolators and the others can be input-output units. Each device that is connected to the loop must have its own address. The luminaires are addressed directly from the panel, whereas the other devices have microswitches that are used for address setting. The luminaires are tested by the panel at pre-programmed time periods. The tests are conducted per zone. In case of faulty operations, the panel shows on its display the names, addresses, type of luminaires and the type of fault, for each luminaire separately. GR-6000. Addressable adaptor for GR-6/UN and also co-operate with the panel GR-650 for luminairies 18-58W. PANEL AND PERIPHERALS from the ADDRESSABLE LIGHT series GR-650 GR-655 BSR-7070/A Control panel for addressable luminaires (240 address capability) Addressable input-output unit Addressable line isolator 923650000 923655000 921707001 GR-6000 Addressable adaptor for GR-6/UN 960006025 ADDRESSABLE EMERGENCY LUMINAIRES from the ADDRESSABLE LIGHT series GR-630 GR-632 GR-634 GR-636 Addressable, non-maintained / fluo. 8W, 90min. Addressable, non-maintained / fluo. 8W, 3h. Addressable, maintained / fluo. 8W, 90min. Addressable, maintained / fluo. 8W, 3h. 350x134x45mm 350x134x45mm 350x134x45mm 350x134x45mm 923630000 923632000 923634000 923636000 IP 40 ADDRESSABLE EMERGENCY LUMINAIRES from the ADDRESSABLE LIGHT series (double sided) GR-660 GR-662 GR-664 GR-668 Addressable, non-maintained (double sided) / fluo. 8W, 90min. Addressable, non-maintained (double sided) / fluo. 8W, 3h. Addressable, maintained (double sided) / fluo. 8W, 90min. Addressable, maintained (double sided) / fluo. 8W, 3h. 350x134x60mm 350x134x60mm 350x134x60mm 350x134x60mm 923660000 923662000 923664000 923668000 IP 40 BSR-7070/A GR-6000 GR-655 35

EMERGENCY LUMINAIRES WITH HIGH POWER LIGHT OUTPUT They were designed for areas where high power illumination or maximum duration is required. The GR-21/H3 is a waterproof (IP 65) emergency luminaire with an electrostatically painted cabinet, two 55W lamps and a 3 hour duration. GR-20 EMERGENCY LUMINAIRE WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series GR-20 S-10800 Sustained / halogen 2x20W + LEDs-700 lm, 90min. Exit sticker GR-20 300x330x97mm 923020000 807108000 IP 42 EMERGENCY LUMINAIRES WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series GR-21 Non-maintained / halogen 2x20W-700 lm, 90min. GR-21/H Non-maintained / halogen 2x55W-2400 lm, 60min. GR-28 Non-maintained / incandescent 2x18W-600 lm, 5h. GR-29 Non-maintained /halogen 2x20W-800 lm, 3h. 300x330x97mm 325x395x97mm 300x330x97mm 300x330x97mm 923021000 923021001 923028000 923029000 IP 42 GR-21/H3 WATERPROOF EMERGENCY LUMINAIRE WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series GR-21/H3 Waterproof, non-maintained / halogen 2x55W-2400 lm, 3h. 400x500x140mm 923021011 IP 65 WATERPROOF EMERGENCY LUMINAIRES WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series GR-21, GR-21/H GR-28,GR-29 GR-30 GR-31 GR-32 Waterproof, non-maintained / halogen 2x20W-700 lm, 90min. Waterproof, non-maintained / halogen 2x20W-700 lm, 3h. Waterproof, non-maintained / halogen 2x55W-2400 lm, 60min. 300x330x97mm 300x330x97mm 325x395x97mm 923030000 923031000 923032000 SELF-TESTING EMERGENCY LUMINAIRES WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series IP 65 GR-36 GR-37 GR-39 Self-testing, non-maintained/ halogen 2x20W-700 lm, 90min. 300x330x97mm Self-testing, non-maintained/halogen 2x55W-2400 lm,60min. 325x395x97mm Self-testing, non-maintained/ halogen 2x20W-700 lm, 3h. 300x330x97mm 923036000 923037000 923039000 IP 42 GR-21H, GR-32 GR-37 The self-adhesive legends below, (only for the GR-20) can be provided after order S-10800/S65L S-10800/S65R S-10800/S65D EMERGENCY LUMINAIRE WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series GR-21/LEDs Non-maintained /lamps 2x3 LEDs 270 lm, 90min. 300x330x97mm 923021031 IP 42 WATERPROOF EMERGENCY LUMINAIRE WITH HIGH POWER LIGHT OUTPUT from the POWER LIGHT series GR-30/LED Waterproof, non-maintained /lamps 2x3LEDs 190lm, 90min. 325x395x97mm 923030002 IP 65 NON-MAINTAINED EMERG. LUM. AND 18h MINIMUM AUTON. DURATION from the POWER LED LIGHT series GR-21/LED GR-22/L Non-maintained / 60 LEDs - 550lm in emergency mode, 18 minimum autonomous duration 300x97x230mm 923022100 IP 42 ACCESSORY FOR THE POWER LED LIGHT LUMINAIRE S-00800 Exit sticker 215x65 mm 807008000 GR-22/L Self-adhesive legend contained in the package The self-adhesive legends below can be provided after order S-00800/S65L S-00800/S65R S-00800/S65D 36

COMMON TO EMERGENCY LUMINAIRE - CONVERTER The CONVERTERS are mechanisms that gives us the capability of converting a common luminaire with an 18W to 58W fluorescent tube, to an emergency luminaire. They can cooperate with electronic or conventional ballasts. They have an incorporated battery charger and a change over relay, that automatically lights the lamp in emergency mode, when there is a power failure. Their autonomous duration depends on the battery type and the lamp used. CONVERTERS-COMMON TO EMERGENCY LUMINAIRES GR-4/UN/Á-966 Converter with battery Ni-Cd 3.6V/1Ah 960004043 GR-4/UN/65 GR-4/UN/66 GR-4/UN/67 GR-6/UN/61 GR-6/UN/62 Converter with battery Ni-Cd 3.6V/1.5Ah Converter with battery Ni-Cd 3.6V/3Ah Converter with battery Ni-Cd 3.6V/4Ah Converter with battery Ni-Cd 4.8V/1.5Ah Converter with battery Ni-Cd 4.8V/3Ah 960004028 960004029 960004030 960006018 960006019 GR-6/UN/64 Converter with battery Ni-Cd 4.8V/4Ah 960006020 IP 20 Autonomous duration depends on the lamp used, as you can see below. TYPE GR-4/UN/A-966 18W (T8) 36W (T8) 58W (T8) 14W (T5) 35W (T5) 18W (COMPACT) W (2D/4PIN) 36W (COMPACT) 7-9W CFL 60 min. GR-4/UN/65 GR-4/UN/66 GR-4/UN/67 90 min. 180 min. 240 min. 70 min. 60 min. 75 min. 60 min. 90 min. 70 min. 70 min. 140 min. 120 min. 150 min. 120 min. 180 min. 140 min. 140 min. 180 min. 160 min. 200 min. 150 min. 240 min. 180 min. 180 min. GR-6/UN/61 80 min. 60 min. 50 min. 75 min. 40 min. 80 min. 60 min. 70 min. GR-6/UN/62 160 min. 120 min. 100 min. 150 min. 90 min. 160 min. 130 min. 130 min. GR-6/UN/64 220 min. 160 min. 140 min. 200 min. 110 min. 220 min. 170 min. 180 min. PROGRAMMABLE COMMON TO EMERGENCY LUMINAIRE CONVERTER FOR FLUORESCENT LAMPS Ô5/Ô8 6-80W CONVERTER GR-1004. Common to emergency luminaire converter User Programmable Constant power output selection capability Suitable for T5, T8 & CFL lamps (6W-80W) Smart battery management Can accept 4,8V-8,4V batteries(1,5ah to 4Ah) Microprocessor monitored functions (MCU) Selectable power output Small height-width dimensions (21mmx31mm) Selectable autonomous duration PROGRAMMABLE CONVERTER FOR FLUORESCENT LAMPS Ô5/Ô8 6-80W GR-1004 Programmable converter for fluo. lamps 80W T5 960100400 NON PROGRAMMABLE CONVERTER FOR FLUORESCENT LAMPS Ô5/Ô8 6-80W GR-1004-A/61 Common to emergency luminaire converter 4.8V/1.5Ah, 90min. GR-1004-B/62 Common to emergency luminaire converter 4.8V/3Ah, 3h. GR-1004-C/71 Common to emergency luminaire converter 8.4V/1.5Ah, 90min. GR-1004-D/72 Common to emergency luminaire converter 8.4V//3Ah, 3h. 960100461 960100462 960100471 960100472 NON PROGRAMMABLE COMMON TO EMERGENCY LUMINAIRE CONVERTER LAMPS TYPE BATTERY 6W (Ô5) 8W (Ô5) 11W (CFL) 13W (CFL) 14W (T5) 18W (CFL) 21W (T5) 24W (T5) 24W (CFL) 28W (T5) 32W(CIRC) 32W (CFL) 35W(T5) 36W(T8) 36W (CFL) 49W(T5) 54W(T5) 55W(CFL) 58W(T8) 80W(T5) DURATION GR-1004-A/61 4,8V - 1,5Ah 90 min. GR-1004-B/62 4,8V - 3Ah 3 hours GR-1004-C/71 8,4V - 1,5Ah 90 min. GR-1004-D/72 8,4V - 3Ah 3 hours 37

EL 1x36 ngn EL 2x36 ngn EL 2x18 s EL 2x58 ngn EL 1/2x18-42 TCs ELECTRONIC BALLAST ELECTRONIC BALLAST FOR Ô8 LAMPS (18-58W 220-240V 50-60 Hz) TYPE DIMENSION CODE PRICE EL 1x18 ngn EL 1x36 ngn EL 1x58 ngn EL 4x18 ngn EL 2x18 ngn EL 2x36 ngn EL 2x58 ngn EL 1x18 s EL 2x18 s EL 1x36/40/18 s EL 2x36/40 s EL 1x58 s EL 2x58 s 2 2 2 2 2 2 2 1 3 1 3 1 3 980660100 980660101 980660102 980660103 980660104 980660105 980660106 980660300 980660301 980660302 980660303 980660304 980660305 ELECTRONIC BALLAST FOR PL LAMPS (9-42W 220-240V 50-60 Hz) WITH 4 PINS TYPE DIMENSION CODE PRICE EL 1/2x9-13 TCs EL 1/2x18 TCs EL 2x32/42 TCs EL 1/2x18-42 TCs 5 5 5 5 980661300 980661301 980661302 980661303 DIGITAL ELECTRONIC BALLAST FOR T8 LAMPS (18-58W 220-240V 50-60 Hz) WITH 0-10V DIMMER TYPE DIMENSION CODE PRICE EL 1x18sc EL 2x18sc EL 4x18sc EL 1x36sc EL 2x36sc EL 1x58sc EL 2x58sc 3 4 4 3 4 3 4 980660700 980660701 980660702 980660703 980660704 980660705 980660706 For quantities of 100 pieces or more, regardless of model, ask for a special offer. DIGITAL ELECTRONIC BALLAST FOR TCL LAMPS (55W 220-240V 50-60 Hz) WITH DALI PROTOCOL TYPE DIMENSION CODE PRICE EL 1x55iDim EL 2x55iDim ELECTRONIC BALLAST FOR Ô5 LAMPS (14-80W 220-240V 50-60 Hz) TYPE DIMENSION CODE PRICE EL 2x14-35s EL 3/4x14s EL 3/4x18s EL 1x24s EL 2x24s EL 1x39/36s EL 2x39/36s EL 1x49s EL 2x49s EL 1x54s EL 2x54s EL 1x80s EL 2x80su ELECTRONIC BALLAST FOR ÔCL LAMPS (55W 220-240V 50-60 Hz) TYPE DIMENSION CODE PRICE EL 1x55s EL 2x55s 3 3 3 1 3 1 3 1 3 1 3 1 3 1 3 980660501 980660502 980660202 980660503 980660504 980660505 980660506 980660507 980660508 980660509 980660510 980660511 980660406 980660600 980660601 DIGITAL ELECTRONIC BALLAST FOR TCL LAMPS (55W 220-240V 50-60 Hz) WITH 0-10V DIMMER TYPE DIMENSION CODE PRICE EL 1x55sc EL 2x55sc 3 4 3 4 980661102 980661104 980660800 980660801 EL 1x39sc DIMENSIONS (LxWxH) 1. 280x30x21 2. 280x30x28 3. 360x30x21 4. 430x30x21 5. 103,5x67x28 DIGITAL ELECTRONIC BALLAST FOR T5 LAMPS (14-80W 220-240V 50-60 Hz) WITH DALI PROTOCOL TYPE DIMENSION CODE PRICE EL 1x14iDim 3 980661200 EL 2x14iDim 4 980661201 EL 1x24iDim 3 980661209 EL 2x24iDim 4 980661210 EL 1x14-35iDim 3 980661200 EL 2x14-35iDim 4 980661201 EL 1x36iDim EL 2x36iDim 3 4 980661100 980661110 EL 1x39iDim 3 980661211 EL 2x39iDim 4 980661218 EL 1x49iDim 3 980661213 EL 2x49iDim 4 980661214 EL 1x54iDim 3 980661215 EL 2x54iDim 4 980661216 EL 1x80iDim 3 980661217 EL 2x80iDim 4 980661219 DIGITAL ELECTRONIC BALLAST FOR T5 LAMPS (14-80W 220-240V 50-60 Hz) WITH 0-10V DIMMER TYPE DIMENSION CODE PRICE EL 1x14sc EL 2x14sc 3 4 980660900 980660901 EL 4x14sc EL 1x21sc EL 2x21sc EL 1x28sc EL 2x28sc EL 1x35sc EL 2x35sc EL 1x24sc EL 2x24sc EL 1x39sc EL 2x39sc EL 1x49sc EL 2x49sc EL 1x54sc EL 2x54sc EL 1x80sc 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 980660902 980660903 980660904 980660905 980660906 980660907 980660908 980660909 980660910 980660911 980660912 980660913 980660914 980660915 980660916 980660917

FIRE DETECTION

CONTENTS CONVENTIONAL FIRE DETECTION SYSTEMS FIRE DETECTION PANELS WITH 2,3,4,6 & 10 ZONES from the FIRE SYS series FIRE DETECTION SET BS-619 EXPANDABLE 16-64 ZONE FIRE DETECTION SYSTEM from the DIGIT FIRE series FIRE DETECTION CALL POINTS DETECTORS FIRE DETECTION SYSTEM FOR TUNNEL USING OPTICAL FIBERS TECHNOLOGY ANALOG ADDRESSABLE FIRE DETECTION SYSTEMS FIRE DETECTION PANEL 2-8 LOOP FIRE DETECTION PANEL 1 LOOP ADDRESSABLE FIRE DETECTION DEVICES FIRE DETECTION PERIPHERALS SPECIAL PURPOSE FIRE DETECTION UNITS INDICATION & WARNING DEVICES FOR FIRE DETECTION SYSTEMS AUTONOMOUS FIRE DETECTION DEVICES

LPCB CERTIFICATION for the BSR-2104 & BSR-2114 panels The Loss Prevention Certification Board (LPCB) has been working with industry and government for more than 100 years to set the standards needed to ensure that fire and security products and services perform effectively. LPCB offers third-party approval confirming that products and services have met and will continue to meet these standards. This benefits both specifiers and manufacturers: Specifiers selecting LPCB approved products reduce fire safety and security risks and demonstrate due diligence (the use of approved products is encouraged by insurers). They also avoid wasting money on purchasing inappropriate equipment, and save time spent on searching for and assessing products and services. Manufactures gaining LPCB approval can increase the value and sales of their products, because LPCB approved products are specified world wide and recognised for their ability to conform every time. In addition, third-party approval demonstrates due diligence and reduces liability for manufacturer - and their insurers and customers. 41

VDS CERTIFICATION for the BS-636 panel As one of Germany s leading independent testing institutions for fire protection and security, VdS enjoys the trust of all groups involved in the safety and security markets. On the operational side, VdS offers an innovative range of services in the fields of fire protection, security, training and publishing. VdS is a fully owned subsidiary of the German Insurance Association (GDV) and, through its owner, has more than 100 years of experience in its core area of business, namely fire protection. VdS can call on experts in all fields of fire protection and combines the various specialists for matters of constructional fire protection and fire protection installations. Its hundred years of expertise, its focus on fire protection testing and its close cooperation with its own laboratories are unique selling points of the VdS Inspection Services. It is an internationally recognized innovation and technology leader. Numerous accreditations not only document the outstanding competence and expertise of VdS, they also reflect its independence and objective assessments. A VdS certificate therefore gives commercial and private consumers an important orientation aid in distinguishing between high-quality and mediocre products and services. Manufacturers and service providers benefit from the consumers growing need for safety, as a result of which buying decisions are becoming increasingly dependent on safety aspects. 42

FIRE DETECTION SYSTEMS CONVENTIONAL FIRE DETECTION SYSTEMS FIRE DETECTION PANELS WITH 2,3,4,6 & 10 ZONES from the FIRE SYS series FIRE DETECTION SET BS-619 EXPANDABLE 16-64 ZONE FIRE DETECTION SYSTEM from the DIGIT FIRE series FIRE DETECTION CALL POINTS DETECTORS FIRE DETECTION SYSTEM FOR TUNNEL USING OPTICAL FIBERS TECHNOLOGY

CONVENTIONAL FIRE DETECTION SYSTEMS BS-632, BS-634, BS-636. Fire detection panels with 2, 4 and 6 zones respectively. They have uniform operations,controls and indications. They all have 2 siren outputs, alarm relay, programmable telephone dialer output and a relay per zone. BS-610. 10 zone fire detection panel with the same operations and indications as the previous panels. It offers 2 outputs used for sirens, an alarm relay, fault output and 2 independent relays for zones 1 and 2 respectively. BS-633. A fire detection control panel with 2 sensor zones, one zone for call points, one siren output and one fire extinguishing output with programmable delay (suitable for petrol stations). A battery type Á-986 (12V/7Ah) is required for their operation. All operations and indication are according to the European norm ÅÍ 54. BS-634/EXT. Fire detection panel with 2 zones, 1 gas detection zone & manual extinguishing. Suitable for local extinguishing in all business areas. BS-628-1. 2 zone extinguishing panel, with a zone for manual extinguishing & cancellation. The extinguishing output is controllable and can be used for a detonator or an electrovalve. In addition, there is a siren output, an error output and an output for connection with fire detection panel. BS-633 BS-628-1 BS-620 BS-50 FIRE DETECTION PANELS WITH 2, 3, 4, 6 AND 10 ZONES from the FIRE SYS series BS-632 2 zone fire det. control panel with independent relay per zone & AUX relay 921632000 BS-633 3 zone fire det. control panel (for petrol stations) 921633000 BS-634 4 zone fire det. control panel with independent relay per zone & AUX relay 921634000 BS-634/Å Ô 4 zone fire det. control panel with 1 extinguishing output (cross zone) 921634006 *BS-636 6 zone fire det. control panel with independent relay per zone & AUX relay 921636000 BS-610 10 zone fire det. control panel 921610000 BS-6036 6 zone fire det. control panel with independent relay per zone & AUX relay 9216036001 *BS-636 Certification FIRE EXTINGUISH PANELS BS-627 Fire extinguish panel, 1 command with 4 zones 921627000 BS-628-1 Extinguishing panel, with a zone for manual extinguishing & cancellation 921628001 BS-50 FIRE DETECTION PERIPHERALS - ACCESSORIES from the FIRE SYS series BS-613 BS-620 Card with 4 zone relays for BS-610 panel Public address unit 921613000 921620000 BS-50 Microphone for BS-620 921050000 Á-632 Á-986 Metallic recess mounting base for the Fire Sys panels Lead Acid Battery Pb 12V/ 7Ah 980163200 603001270 FIRE DETECTION SET BS-619 This set contains all the devices required for installing a small fire detection system in limited areas (small shops, houses ). The BS-619 set contains: BS-632 conventional fire detection control panel. A-986 battery for the panel. BS-655 smoke detector. BS-660 heat of rise detector. BS-536 manual call point. BS-531 siren with beacon. FIRE DETECTION SET BS-619 BS-619 Fire detection set 921619000 44

CONVENTIONAL FIRE DETECTION SYSTEMS BS-114 BS-115 BS-116 BS-117 BS-118 installation. All events are shown in English and in detail. It also has a history memory. A group of 6 different units that can be interconnected and combined in various ways, to realize fire detection systems from 16 to 64 zones with capabilities of controlling fire extinguishing units, electro-valves, electromagnetic door latches and all special devices, that are required even in the most complex systems. The programing and monitoring of all the units can be done using a small control unit (BS-114), that is the only unit required to be in the control area. The system has full programming capabilities, depending on the requirements of each EXPANDABLE 16-24 ZONE FIRE DETECTION SYSTEM AND FIRE DETECTION PERIPHERALS from the DIGIT FIRE series BS-116 BS-114 BS-115 BS-117 BS-118 16 zone fire detection panel Keyboard for BS-116 panel Repeater for BS-116 panel 16 relay unit for BS-116 fire detection panel Fire extinguishing unit for BS-116 panel 921116000 921114000 921115000 921117000 921118000 ACCESSORIES from the DIGIT FIRE series Á-116 Metallic recess mounting base for the BS-116 panel 980111600 Á-986 Lead Acid Battery Pb 12V/ 7Ah 603001270 FIRE ALARM CALL POINTS BS-533 BS-534 BS-536 A-536 BS-7000 FIRE EXTINGUISHING CALL POINTS BS-536/WP Extinguishing call point Extinguishing call point with isolation lock Manual call point with TEST-RESET key BS-534 BS-536 BS-533 921533000 921534000 921536000 BS-537 WATERPROOF (IP 65) FIRE DETECTION CALL POINT BS-536/WP BS-7000 Waterproof (IP 65), fire extinguishing call point Waterproof (IP 65), fire extinguishing call point (metallic case) 921536007 980170000 CANCEL CALL POINTS TYPE DESCRIPTION CODE PRICE BS-537 Cancel call point 921537000 BS-537/634/EXT Cancel call point for the BS-634/EXT panel 921537001 ACCESSORIES A-536 Recess wall mounting base 927536000 GLASS-126 Glass for call point BS-7000 980181260 45

SMOKE, HEAT AND GAS DETECTORS Operation voltage 18-30V DC(smoke,heat)11-30V DC (gas) Activation relay(gas detectors) Activation indication LED Produced in accordance with European norms EÍ 54 BS-655. The optical smoke sensor (or smoke particle BS-660. Heat of rise detector with base. detector) is activated when the obscuration rate caused BS-661. Waterproof (IP 65), heat of rise detector. by the smoke exceeds 3% per meter. BS-657. Double technology sensor. It can be used to monitor an area of about 25-30 sqm. BS-655 BS-658 BS-660, BS-661 BS-668, BS-657 BS-685 BS-686 SMOKE,HEAT AND GAS DETECTORS BS-659 BS-655 BS-657 BS-660 Optical smoke detector with base Smoke and heat detector with base Heat of rise detector with base 921655000 921657000 921660000 BS-668 o 60 C heat detector with base 921668000 o BS-668/90 90 C heat detector with base 921668090 BS-659 Flame detector with base 980165900 Base-6024 Base with relay 24V for BS-655,BS-657,BS-660,BS-668 927600001 Base-6024 WATERPROOF HEAT AND GAS DETECTORS BS-661 Waterproof (IP 65), heat of rise detector 921661000 BS-658 Waterproof (IP 65), 11-30V DC carbon monoxide det. (capab. for double connection) 980165800 BS-685 BS-686 Waterproof (IP 65), LPG detector with relay, 10V-30DC Waterproof (IP 65), natural gas detector with relay, 10V-30DC 921685000 921686000 IP 65 BS-660/Ex ANTIEXPLOSIVE TYPE SMOKE & HEAT DETECTORS BS-655/Ex Antiexplosive type optical smoke detector 980165500 BS-660/Ex Antiexplosive type heat of rise detector 980166002 * (see also page 47: Accessories set for testing smoke & heat detectors) BS-655/Ex ï BS-668. The heat detector is activated when the temperature of the monitored area exceeds 60 C. It can be used to monitor an area of about 50 sqm. BS-685. Waterproof (IP 65) LPG detector with relay. It is activated when the gas content (propane or butane) in the monitored area exceeds 5-15% of the lower explosive level (L.E.L). The incorporated LED lights when the detector is activated. The command towards that panel is given with a voltage free relay contact. BS-686. Waterproof (IP 65) natural gas detector with relay. It is activated when the methane or alcohol content in the monitored area exceeds 5-15% of the lower explosive level (L.E.L) The incorporated LED lights when the detector is activated. The command towards that panel is given with a voltage free relay contact. Base-6024.This special base has an incorporated relay which is activated when the detector issues an alarm. It can be used to control devices (i.e. Sirens, Beacons) which must be activated in the event of an alarm condition. 46

BEAM SMOKE & FLAME DETECTORS BS-230, BS-232, BS-240, BS-242.New remote-adjusted beam detectors 8-50m and 8-100m. Up to 4 detections devices per control unit. Alignment and focus of the detection heads from the control unit (manual or automatic) The BS-230, BS-240 are state of the art in the field of beam detectors. They consist of the controller, the detector and the mirror (1 or 4). The controller can manage up to 4 detectors thus making the installation more economical. The detectors (detection heads) have a motor for the movement on the horizontal and vertical axis and a laser transceiver. With these parts they can be adjusted manually or automatically from a distance during the installation phase. REMOTE-ADJUSTED BEAM DETECTORS BS-230 50m beam detector with controller, detection head and 1 mirror 980123000 BS-232 Detection head and 1 mirror 980123200 BS-240 100m beam detector with controller, detection head and 1 mirror 980124000 BS-242 Detection head and 4 mirrors 980124200 IP 54 BS-200. 10-100 meter beam smoke detector. Consists of a transmitter, a receiver and an interface unit that is used for adjustment and connection purposes. In case of a fire, the smoke absorbs part of the I.R emission. When the quantity of the IR beam drops below a predetermined level for more than 8 to 10 seconds the detector issues an alarm signal. BS-200 BS-250. 5-50 meter beam smoke detector. Consists of 2 pieces. One piece contains an IR transmitter, receiver and a connection-control unit. The second piece is a special mirror which is mounted directly opposite from the main detector. BEAM SMOKE DETECTORS BS-200 BS-211 BS-250 Beam smoke detector 10-100m Beam smoke detector 10-100m (with mirror) Beam smoke detector 5-50m (with mirror) 980120000 980121100 980125000 BS-250 ACCESSORIES FOR WATERPROOF SMOKE, HEAT AND GAS DETECTORS BOX-3016 A-752 RSC-TESTKIT Base for installing detectors in air-ducts Spray for testing smoke detectors (150ml) Smoke capsule for TESTKIT 980130160 752000008 980600111 ACCESSORIES SET FOR TESTING SMOKE & HEAT DETECTORS TESTKIT Accessories set for testing smoke & heat detectors 980600110 * (see also page 46:Waterproof smoke, heat and gas detectors) BOX-3016 47

CONVENTIONAL FIRE DETECTION SYSTEM FOR TUNNELS USING OPTICAL FIBERS TECHNOLOGY Conventional fire detection panel for tunnels using optical Operation voltage 220-240VAC or 24VDC. fibers technology. The programing and the monitoring of the panel can be done by o Detection accuracy below 1 meter and 1 C. a PC (RS-232 or Ethernet) Produced in accordance with European norms EÍ 54. The relay outputs are fully programmable. Certificated by VDS. TEMPERATURE DETECTION PANEL FOR TUNNELS FO-10010 FO-10020 FO-10030 FO-10040 Temperature Detection Panel for Tunnel (1000m) Temperature Detection Panel for Tunnel (2000m) Temperature Detection Panel for Tunnel (3000m) Temperature Detection Panel for Tunnel (4000m) 980010010 980010020 980010030 980010040 TEMPERATURE DETECTION PANEL WITH 2 CHANNELS FOR TUNNELS FO-10012 FO-10022 FO-10032 FO-10042 Temperature Detection Panel for Tunnel, 2 channels(1000m) Temperature Detection Panel for Tunnel, 2 channels,(2000m) Temperature Detection Panel for Tunnel, 2 channels,(3000m) Temperature Detection Panel for Tunnel, 2 channels,(4000m) 980010012 980010022 980010032 980010042 FO-10000 FO-10001 FO-10002 FO-10003 FO-10004 FO-10006 FO-10007 20 output card for panel FO-100XX Ethernet card for communication with a PC Optical fiber cable with metal protection Optical fiber cable without metal protection Optical fiber cable with antivandal protection Cable set for quick response installation (24V) Cable set for quick response installation (230V) 980010000 980010001 980010002 980010003 980010004 980010006 980010007 48

FIRE DETECTION SYSTEMS ANALOG ADDRESSABLE FIRE DETECTION SYSTEMS ANALOG ADDRESSABLE FIRE DETECTION PANEL 2-8 LOOP ANALOG ADDRESSABLE FIRE DETECTION PANEL 1 LOOP ADDRESSABLE FIRE DETECTION DEVICES

ANALOG ADDRESSABLE FIRE DETECTION SYSTEMS BSR-2104 BSR-2114 ANALOG ADDRESSABLE FIRE DETECTION CONTROL PANEL WITH 2, 4, 6 OR 8 LOOPS BSR-2000 BSR-8017 BSR-5032 BSR-5032/WP Ìodern addressable fire alarm panel with 32, 64 or 96 zones Suitable for large installation such as malls, hotels, factories. 2 or 4 loops (150 points per loop). Produced in accordance with EN54-2, EN54-4. 32, 64 or 96 zone capability. 220-240V AC mains power supply. It offers 2 or 4 fully monitored siren outputs with a rating of 24V / 0,5A and 6 programmable relays as well as a built in network circuit. Incorporated power supply with a rating of 24V/100W and built-in battery charger for 24V batteries with a capacity of up-to 12Ah. The panels offer an extensive list of adjustments and characteristics for the control of the installed devices and sirens. These parameters can easily be adjusted using a PC based program. The programming of the panel can also be done using a PC. Messages can be viewed on the big LCD (320x240 pixels) whereas LEDs are used to show basic operations such as alarms, faults and isolated sections The operation is done using the built-in 16 key keypad. There is also an incorporated safety lock and a thermal printer mounting position EXPANSION UNITS BSR-5032. Addressable fire alarm siren with beacon. These sirens are powered from the loop and each loop can accept up-to 16 sirens. BSR-8017. Addressable input-output unit. It has input which is monitored for open and short circuit conditions and one output relay with a rating of 1A/30V fully programmable from the panel. 50

ANALOG ADDRESSABLE FIRE DETECTION SYSTEMS ADDRESSABLE FIRE DETECTION CONTROL PANEL 1 TO 8 LOOP from the ADDRESS FIRE series ANALOG ADDRESSABLE FIRE DETECTION CONTROL PANEL 1 TO 8 LOOP from the ADDRESS FIRE series BSR-2104 BSR-2114 Analog, addressable fire detection panel 2 loops / 96 zone Analog, addressable fire detection panel 4 loops / 96 zone 921210400 921211400 BSR-2140 BSR-2141 Expansion device 2 loops for BSR-21XX addressable panel Expansion device 4 loops for BSR-21XX addressable panel 921214000 921214100 BSR-2142 BSR-2000 BSR-8017 BSR-5032 Thermal printer for BSR-21XX Repeat-panel for BSR-21 Áddressable É/Ï unit Áddressable siren with beacon IP 42 921214200 921200001 921801700 921503200 BSR-5032/WP Waterproof IP 65, addressable siren with beacon 921503201 A-2100 Software & USB cable for BSR-21xx 921200000 BOX-2100/WP Waterproof metal box for fire det. panels BSR-2104 & BSR-2114 980210001 SPECIALIZED PROGRAM FOR THE MANAGEMENT OF FIRE DETECTION SYSTEMS BY A PC. The CMI series includes programs for independent functioning & supports individual or network panel The BMS series includes the required programs for operating the system with a central building management system.. BMS-1001 BMS-1204 BMS-1202 BMS-1203 CMI-1001 CMI-1202 CMI-1203 CMI-1204 BMS-485 Software BMS & CMI for panels BSR-2104 & BSR-2114 Basic software for connection BSR-2xxx with Gateway Software for connection BSR-21xx with BACnet protocol Software for connection BSR-21xx with Modbus protocol Software for connection BSR-21xx with OPC protocol Visual software monitor BSR-21xx Modbus protocol for CMI-1001 OPC protocol for CMI-1001 BACnet protocol for CMI-1001 Device for connection BSR-21xx with a PC The state of the art BSR-1116 fire detection control panel, is produced according to European norms ÅÍ 54-2 and ÅÍ 54-4. It is suitable for medium and large installations such as hotels, malls and factories. Each and every device connected to the panel has its own individual address and 16 character name which is user defined. The loop of the panel can accept up-to 150 addressable devices and has conventional device connection capabilities. All devices can be divided into 16 zones without any restrictions. The panel has 2 independently programmable siren outputs, where conventional sirens and bells can be connected. BSR-8018. Addressable input-output unit. It has input which is monitored for open and short circuit conditions and one output relay with a rating of 1A/30V fully programmable from the panel. Up-to 16 such units can be connected to the loop. Every unit occupies 2 addresses, one for the input and one for the relay. BSR-5031. Addressable fire alarm siren with beacon. These sirens are powered from the loop and each loop can accept upto 16 sirens. BSR-6558. Thermal printer suitable for connection with the addressable panel BSR-1116. 921100101 921120401 921120201 921120301 921100100 921120200 921120300 921120400 921485100 ANALOGUE ADDRESSABLE FIRE DETECTION CONTROL PANEL 1 LOOP FIRE DETECTION CONTROL PANEL 1 LOOP from the ADDRESS FIRE series BSR-1116 BSR-5031 BSR-5031/WP BSR-6558 BSR-8018 A-1100 1 loop analog addressable fire detection control panel, 16 zones Áddressable fire alarm siren with beacon, 100dB Waterproof IP65, addressable fire alarm siren & beacon, 100dB Thermal printer for BSR-1116 Addressable input/output unit with auxiliary relay Software for BSR-1116 & USB cable 921111600 921503100 921503101 921655800 921801800 921110000 51

ADDRESSABLE FIRE DETECTION DEVICES BSR-6055/A. Addressable optical smoke sensor. It has an BSR-8013/Á. Addressable conventional device driving unit. internal «smart» chamber with a special transmitter and This unit enables the system to accept a new or prereceiver. The sensor continuously sends digital information installed zone of conventional sensors and call points. to the panel regarding quantity of the smoke. The panel, When the panel issues an Siren Silence command then using special algorithms, decides when to issue the alarm. the BSR-8013/A and the sensor that issued the alarm will The sensor has a special connection base and micro- stay activated so they can easily be found. A Reset switches that are used to set the address. command will restore the sensors to normal operation. BSR-6057/Á. Addressable optical smoke / heat of rise Each loop can accept up-to 10 devices. detector.(the same base as BSR-6055/A) BSR-8019/Á. Addressable input unit with auxiliary relay. It ÂSR-6060/Á. Addressable heat of rise sensor. It has a is used for connected gas detectors (e.g. BS-685 and BSspecial temperature sensor that gives an output depending 686) on the loop. It has an input which is monitored for on the temperature of the monitored area. The built-in open and short circuit conditions and a relay (1A/30V) microprocessor calculates the rise rate of the temperature activated after a panel reset. and sends the digital information to the panel. The sensor BSR-7070/Á. Line isolator. It is placed between other has a special connection base and micro-switches that are addressable units and isolates any short circuits that might ADDRESSABLE FIRE DETECTION DEVICES COMPATIBLE TO PANELS BSR-2104, BSR-2114 & BSR-1116 used to set the address. BSR-5036/Á. Addressable call point. When activated, this call point informs the panel of the precise location of the event while simultaneously lighting the incorporated LED. It has micro-switches which are used to set the address. happen on the loop cables. Up-to 32 such devices can be connected on the loop. Base-6024/SB ADDRESSABLE FIRE DETECTION DEVICES BSR-5036/A Addressable fire detection call point 921503602 BSR-5036/A/WP Waterproof IP 65, addressable fire detection call point 921503603 BSR-5072 Remote detector LED (red) 921507200 BSR-6055/A Analog addressable optical smoke detector 921605502 BSR-6057/A Analog addressable optical smoke / heat of rise detector 921605700 BSR-6060/A Analog addressable heat of rise detector 921606002 BSR-7070/A Addressable line isolator 921707001 BSR-8013/A Addressable conventional device driving unit 921801301 BSR-8019/A Addressable unit input with relay 921801901 Base-6024/SB Base for addressable detector with siren & beacon 921602400 BSR-7071/A Addressable line isolator with base 921707100 BSR-5036/A PERIPHERAL ACCESSORY Á-485 Signal amplifier for RS-485 980148500 BSR-5036/A/WP BSR-8013/A BSR-8019/A BSR-6057/A BSR-6055/A BSR-6060/A BSR-7071/A A-485 BSR-7070/A 52

FIRE DETECTION SYSTEMS FIRE DETECTION PERIPHERAL DEVICES SPECIAL PURPOSE FIRE DETECTION UNITS INDICATION AND WARNING DEVICES FOR FIRE DETECTION SYSTEMS AUTONOMOUS FIRE DETECTION DEVICES

SPECIAL PURPOSE FIRE DETECTION UNITS GR-24/12-1. Stabilized power supply. It can be used to power gas detectors or sirens, when the panel s power supply is not sufficient. Requires 2x12V/7Ah lead acid battery - not included. GR-24/24-1. Stabilized power supply. It can be used to power gas detectors or sirens, when the panel s power supply is not sufficient. Requires 2x12V/7Ah lead acid battery - not included. SPECIAL PURPOSE FIRE DETECTION UNITS (Batteries are not included in the price) TYPE GR-24/12-1 GR-24/24-1 DESCRIPTION CODE PRICE 12V DC, 4 Á - output, Stabilized power supply - without battery 24V DC, 2 Á - output, Stabilized power supply - without battery 923024005 923024006 BS-162. An electro-valve driving unit suitable for activating up-to two 12V DC manually resettable electro-valves from the fire detection control panel, without requiring an external power supply. It is powered with a 12V battery and is suitable for the BS- 116, BS-632, BS-634, BS -636 fire detection control panels. BS-164. An electro-valve driving unit suitable for activating up-to four 24V DC manually resettable electro-valves from the fire detection control panel, without requiring an external power supply. It is powered with a 12V battery and is suitable for the BS- 116, BS-632, BS-634, BS -636 fire detection control panels. SPECIAL PURPOSE FIRE DETECTION UNITS TYPE BS-162 BS-164 DESCRIPTION CODE PRICE 12V Module for electro-valve unit 24V Module for electro-valve unit 921162000 921164000 BS-510/24. An electromagnetic door latch with a latching capability of 50 Kg. It is used in cooperation with fire safety doors, in order to prevent the expansion of the fire when required. The package contains the electromagnet that is placed on the wall and is powered, and the magnet placed on the door along with all the required mounting accessories. The magnet can either be permanently or swivel mounted. SPECIAL PURPOSE FIRE DETECTION UNITS TYPE DESCRIPTION CODE PRICE BS-510/24 Electromagnetic door latch (24V) 980151000 BS-680. 24 Vdc, 6bar, ½" manually reset electro-valve. The electro-valves are placed in the exterior of the BS-682. 230 Vac, 6bar, ½" manually reset electro-valve protected area, and with the arrow engraved on the body, BS-684. 12 Vdc, 6bar, ½" manually reset electro-valve. towards the direction of the gas. SPECIAL PURPOSE FIRE DETECTION UNITS TYPE DESCRIPTION CODE PRICE BS-680 24V DC electro-valve 980168000 BS-682 230V AC electro-valve 980168200 BS-684 12V DC electro-valve 980168400 54

FIRE DETECTION PERIPHERAL DEVICES BS-528 BS-542 BS-576 BS-578 BS-579 BS-572 BS-595 INDICATION AND WARNING DEVICES FOR FIRE DETECTION SYSTEMS BS-528 BS-527 Message indication sign for fire alarm 12-24VDC Indication fire alarm slave luminaire with buzzer 921528000 921527000 BS-542 BS-554 BS-572 BS-576 BS-578 BS-579 BS-595 Siren with beacon, 100dB (for BS-690, BS-691) Megaphone, siren and beacon for BS-620 Remote detector LED (red) Beacon with incandescent lamp 12V DC beacon with XENON lamp 24V DC beacon with XENON lamp 6 alarm bell for fire detection panels 921542000 921554000 921572000 921576000 921578000 921579000 921595000 Sticker contained in the BS-527 package STOP BS-530/W, BS-530 BS-531/WP, BS-531 Siren (IP 42) for fire detection control panel Siren with beacon (IP 42) for fire detection control panel. Operation voltage: 24-30 VDC. Operation voltage: 24-30V DC. 4 LEDs of high illumination. 4 LEDs of high illumination. BS-530 BS-531 Siren for fire detection panel, 100dB, IP 42 Siren with beacon for fire detection panel, 100dB, IP 42 921530000 921531000 BS-530/WP Waterproof (IP 65), siren for fire detection panel, 100dB 921530003 BS-531/WP Waterproof (IP 65), siren with beacon for fire detection panel, 100dB 921531003 55

AUTONOMOUS FIRE DETECTION DEVICES BS-520. Autonomous siren. It has Ni-Cd 2,4V/1000mA batteries and a charger circuit with a 24 hour recharge period. In cooperation with the manual call point (BS-536) it can operate as a small manually operated fire detection system with a 30 minute operation capability even when the power supply fails. It can be used in very small installations such as cafes e.t.c. BS-521. Autonomous siren and beacon. It has the same technical characteristics as the BS-520 autonomous siren and also incorporates a beacon with special high luminosity LEDs. BS-522. 24V AC Autonomous siren and beacon.(requires A-989 battery). This siren has a robust design most suitable for external use. It is used with conventional fire detection control panels. The 18W beacon blinks when the siren is activated and the very powerful megaphone (40W) produces a sound pressure level of 115dB/m. BS-577. Beacon with 3W lamp. This warning device gives a visible indication when connected to the 230 V AC power supply. BS-580. Beacon with XENON tube. This warning device gives a a very intense visible indication when connected to the 230V AC power supply. BS-590. 230V AC general purpose 8 bell. It produces a high pitched characteristic sound with a level of 100dB/m and operates with 230V ÁC. BS-3001. Autonomous siren with beacon, fire extinguishing call point and backup light with TEST button, 180 minutes duration. BS-3002. Autonomous siren with beacon & fire extinguishing call point. BS-590 BS-522 BS-577 BS-580 AUTONOMOUS FIRE DETECTION DEVICES TYPE DESCRIPTION CODE PRICE BS-520 BS-521 BS-520/WP BS-521/WP BS-522 230V AC Autonomous siren with Ni-Cd batteries, 100dB 230V AC Autonomous siren with beacon & Ni-Cd batteries, 100dB Waterproof (IP 65), autonomous siren 230V AC, (Ni-Cd), 100dB Waterproof (IP 65), autonomous siren with beacon 230V AC, (Ni-Cd), 100dB 24V AC Autonomous siren with beacon & (Pb) battery, 115dB 921520000 921521000 921520003 921521005 921522000 BS-577 BS-580 BS-590 230V AC Autonomous beacon with incandescent lamp 230V AC Autonomous beacon with XENON lamp 230V AC 8 inches fire alarm bell 921577000 921580000 921590000 BS-590/WP 230V AC 8 inches waterproof fire alarm bell 921590001 AUTONOMOUS FIRE DETECTION DEVICES TYPE BS-3001 DESCRIPTION Siren with beacon, fire ext. call point and backup light (230V) CODE 921300100 PRICE BS-3002 Siren with beacon & fire extinguishing call point, battery (3xAA) 921300200 BS-650/R. 230 V AC autonomous smoke detector with BS-665. 230 V AC autonomous heat of rise detector. It is relay output.it can monitor an area of 50 sq.m. activated when the temperature of the monitored area rises with a rate of more than 5 ïc per minute. Can be used to monitor an area of 50 sq.m (maximum). TYPE BS-650/R BS-665 DESCRIPTION CODE PRICE 230V AC Optical smoke detector with relay 230V AC Heat of rise detector 921650001 921665000 BS-97, BS-98, BS-99. These devices have an indication LED which blinks every 8 seconds in the quiescent state. When the detector is activated the internal buzzer sounds.. These devices can be installed in offices, bed rooms, kitchens, corridors e.t.c. It can monitor an area of 50 sq.m. TYPE BS-97 BS-98 BS-99 DESCRIPTION CODE PRICE 230V AC optical detector Optical smoke detector with 9V battery 230V AC dual-voltage optical smoke detector with 9V battery 980097000 980098000 980099000 56

GAS DETECTION GAS DETECTION SYSTEMS ANALOG GAS DETECTION AUTONOMOUS GAS DETECTION PERIPHERALS

GAS DETECTION SYSTEMS ANALOG GAS DETECTION BS-344. Microprocessor controlled gas detection panels light (its molecular weight is smaller that 29) then the with 4 inputs and 5 programmable outputs (open relay detectors are place above the probable leakage points. If contacts) suitable for gas detectors with ratings of 4-20mA. the detected gas is considered heavy (its molecular It can cooperate with detectors (4-20mA) that use 2 or 3 weight is above 29) then the detectors are placed below cables for connecting to the panel. It has a 16VA built-in the probable leakage points. power supply and battery charger and can accommodate The connection with the panel is done using 2 cables via a 12V/7Ah (A-986) battery. these cables. The detectors are powered and BS-370. Microprocessor controlled gas detection panels communicate with the panel. A shielded cable with a with 16 inputs and up to 16 programmable outputs (open rating of 2 x 0.5mm2 is required for distances up-to 100 relay contacts) suitable for gas detectors with ratings of 4- meters, 2 x 1mm2 for distances from 100-200 meters, 2 x 20mA.It can cooperate with detectors that use 2 or 3 1.5mm2 for distances from 200-500 meters and 2 x cables for connecting to the panel. The BS-370 can be used 2.5mm2 for distances from 500-1000 meters. as a central panel in a network with BS-375 units thus BS-390, BS-391, BS-393. The anti-explosive type gas creating a system that can accept up-to 200 gas detectors. detectors are detectors that are suitable for hazardous It has a 11VA built-in power supply and battery charger environments. They are certified for environments: II 2G and can accommodate a 12V/7Ah battery. Eex d IIC T6. They have a 4-20mÁ analog output and are BS-375. Network expansion unit for BS-370 panels. It has 8 suitable for panels and peripherals (pg. 55). inputs for detectors and slots that can accept one or two These gas detectors are mounted in a vertical position with BS-376 modules (each module contains 4 programmable the detection nozzle pointing downwards. If the detected relays). Up-to 23 units can be connected to a network thus gas is considered light (its molecular weight is smaller rendering a system that can accept up-to 200 detectors. that 29) then the detectors are placed above the probable The control, programming and indication are all done leakage points. If the detected gas is considered heavy using the central BS-370 panel. It has a 16VA built-in power (its molecular weight is above 29) then the detectors are supply and battery charger and can accommodate a placed below the probable leakage points The connection 12V/7Ah battery. with the panel is done using 3 cables.a shielded cable with BS-376. Expansion card with 4 programmable relays a rating of 3 x 1.5mm2 is required for a distance up-to 300 suitable for BS-375 units. Up-to 2 cards can be installed. meters and 3 x 2.5mm2 for distances up-to 300-600 BS-0, BS-1, BS-2, BS-3. Gas detectors which are meters. suitable for laboratories, industries, car parking stations BS-316. Expandable gas detection panel with a e.t.c.they have a 4-20mÁ analog output and are suitable microprocessor, 16 inputs for connection with gas for panels and peripherals (pg. 55). These gas detectors are detectors 4-20 ma, programmable outputs (opened relay mounted in a vertical position with the detection nozzle contacts). Cooperates with detectors 4-20 ma that are pointing downwards. If the detected gas is considered connected with 2 or 3 cables to the panel. 58

ANALOG GAS DETECTION ANALOG GAS DETECTION PANELS BS-344 BS-370 BS-375 BS-304 BS-308 BS-312 BS-316 4 input analog gas detection panel (non expandible) 16 input & 8 outputs analog gas detection panel Input external expansion panel BS-370 Analog gas detection panel 4 zones Analog gas detection panel 8 zones Analog gas detection panel 12 zones Analog gas detection panel 16 zones 921344000 980370000 980375000 921304000 921308000 921312000 921316000 EXPANSION UNITS BS-376 Expansion card (8 outputs)for BS-375 panel 980376000 Á-304 Expansion card for BS-304,BS-308,BS-312 panels 927304000 WATERPROOF IP 65 ANALOG GAS DETECTORS BS-0 BS-1 BS-2 BS-3 Waterproof IP 65, analog LPG gas detector Waterproof IP 65, analog natural gas detector Waterproof IP 65, analog carbon monoxide detector Waterproof IP 65, analog ammonia detector 9800000 9801000 9802000 9803000 IP 65 ANTI - EXPLOSIVE TYPE GAS SENSORS BS-390 Anti explosive type, analog LPG gas sensor 980390000 BS-391 BS-393 Anti explosive type, analog natural gas sensor Anti explosive type, analog ammonia sensor 980391000 980393000 TS293PX Anti explosive type, analog gas sensor for various gases 980129304 TS293PX-H Anti explosive type, analog gas sensor for various gases 980293002 TS293EO TS293ES TS293KI Anti explosive type, analog oxygen gas sensor Anti explosive type, analog sulfur dioxide gas sensor Anti explosive type, analog hydrogen gas sensor 980129300 980129305 980129306 *(Hexane, ethyl acetone, ethyl alcohol, xylene, toluene, sulfur dioxide, acetylene, methanol). BS-370 BS-316 BS-344 59

AUTONOMOUS GAS DETECTION PERIPHERALS BS-690. Autonomous LPG detector with fire detection zone. It BS-688. Waterproof autonomous natural gas detector (IP 42). is activated when the gas contents in the monitored area It has the same characteristics as the BS-687 but is suitable for exceed 5-15% of the L.E.L. (Lower Explosive Level) detecting natural gas and alcohol vapors. Conventional fire detection sensors, remote gas sensors and BS-673. Autonomous natural gas detector with battery backdifferent kinds of electro-valves, can be installed on the up. This detector has a suitable output capable of driving an special input. It has a built-in sounder, a 5A/230V relay and a electro-valve. The built-in battery enables the electro-valve good operation test button. activation even when the mains power supply fails. It can BS-691. Autonomous natural gas detector with fire detection monitor an area of 25-30 sq.m. zone. This detector has the same characteristics as the BS-690 BS-674. Autonomous LPG detector with battery back-up. It but is suitable for sensing natural gas leaks or alcohol vapors. has the same characteristics as the BS-673 but is suitable for BS-687. Waterproof autonomous LPG detector (IP 42). It is detecting propane-butane gases. activated when the gas (propane, butane) concentration level reach 5-15% of the L.E.L. (Lower explosive level. It has a 220V/5A relay and can monitor an area of 25-30 sq.m. BS-690, BS-696 BS-691, BS-697 BS-692, BS-693 BS-694 BS-695 AUTONOMOUS GAS DETECTION PERIPHERALS BS-690 Autonomous LPG detector with beacon and fire detection zone with output relay BS-691 Autonomous natural gas detector with beacon and fire detection zone BS-692 External LPG sensor for connecting with BS-690, BS-691 BS-693 External natural gas sensor for connecting with BS-690, BS-691 BS-694 BS-695 BS-696 BS-697 230V Autonomous LPG detector with output relay 230V Natural gas detector with output relay Auton. LPG detector with beacon and output for electro-valve 12V / 19W NO. Auton. natural gas detector with beacon and output for electro-valve 12V / 19W NO. 921690000 921691000 921692000 921693000 921694000 921695000 921696000 921697000 BS-687 BS-672-1 BS-688 BS-673 BS-674 BS-687 Autonomous LPG detector with relay & buzzer (IP42) BS-688 Autonomous natural gas detector with relay & buzzer (IP42) BS-673 Autonomous natural gas detector with battery for 12V electro-valve BS-674 Autonomous LPG detector with battery BS-672-1 Autonomous carbon monoxide detector with relay 230V 921687000 921688000 921673000 921674000 980672001 60

BURGLAR ALARM SYSTEMS BURGLAR ALARM SYSTEMS BURGLAR ALARM SYSTEM EURO ALARM WIRELESS BURGLAR ALARM SYSTEM OASIS

BURGLAR ALARM SYSTEM EURO ALARM Six zones with the following connection capabilities: One output for connecting a general purpose siren such as 5 IR motion detectors (radar) per zone and infinite the BS-441 siren. magnetic traps (BS-429). 5 fire alarm detectors (BS- Two outputs for connecting a BS-487 telephone dialer with 655/12orBS-660/12) on zone 6. independent messages for fire or burglar alarms. One input which operates as a 24 hour protection zone. Remote control (BS-424) installation capability One +ÔC output which also operates as a ON-OFF Up-to 4 keyboard(bs-428) connection capability. indication output if a BS-572 indication LED is connected. Connection unit for impact trap installation One output for connecting autonomous sirens such as the BS-414 siren. Produced in accordance with EN60335-1 BS-419 BURGLAR ALARM SYSTEM Contains: - 1 BS-418 burglar alarm panel with 6 zones and IR detector, smoke detector connection capabilities (Á-986 battery included). - 1 BS-414 autonomous siren for external use. (12V/1,2Ah battery included). - 2 BS-405 IR motion detectors. - 2 BS-429 magnetic traps. The BS-418 burglar alarm panel is the central panel of the system. On this unit we can connect all other devices which are used for activation (IR motion detectors, magnetic and impact traps) or indication and warning (sirens and telephone dialers) purposes. The panel can either be wall or recess (with A-632 base) mounted. BS-419 BURGLAR ALARM SET BS-419 Burglar alarm set 921419000 6 ZONE BURGLAR ALARM PANEL BS-418 6 zone burglar alarm panel 921418000 PERIPHERALS AND ACCESSORIES FOR BS-418 BURGLAR ALARM PANELS BS-428 A-986 Á-632 Keyboard for BS-418 with display Lead Acid Battery Pb 12V/ 7Ah Metallic recess mounting base for BS-418, BS-632/4/6 921428000 603001270 980163200 62

BURGLAR ALARM SYSTEMS PERIPHERAL DEVICES & ACCESSORIES SIRENS FOR BS-418 BURGLAR ALARM PANELS BS-414 Áutonomous siren & beacon for burglar alarm panel, 128dB BS-414/DM Outer shell for BS-414 siren (dummy) for decoy installations BS-441 Énterior siren for alarm panel 921414000 918141400 928144100 AUTOMATIC TELEPHONE DIALER BS-489 Automatic telephone dialer (10-30V DC) 921489000 BS-488 Automatic telephone dialer with GSM assimilation capability (12V DC) 921488000 DETECTORS FOR BS-418 BURGLAR ALARM PANELS TYPE DESCRIPTION CODE PRICE BS-405 BS-409 BASE-401 Temperature compensated IR detector /pet immune Combined (microwave-ir) detector Base for detectors BS-405, BS-409 921405000 921409000 980184011 ï BS-360 360 ceiling mounted IR detector 980136000 BS-2000 BS-3000 BS-660/12 Detector for external use (PIR & MW) Detector for external use (2 x PIR & MW) Heat of rise detector 12VDC 980120001 980130003 921660001 BS-655/12 Optical smoke detector 12VDC 921655001 BASE-6012 Base with relay for BS-655/12, BS-660/12 927600000 BS-427 BS-679 Shatter glass detector for alarm panel Flood detector 980142700 980167900 BEAM DETECTORS FOR BS-418 BURGLAR ALARM PANEL BS-210 BS-220 BS-260 BS-275 BS-276 Beam detector 60-100m (transmitter and receiver) Beam detector 10-30m (transmitter and receiver) Beam detector 30-60m (transmitter and receiver) External beam detector(for doors-windows) 10m External beam detector(for doors-windows) 40m 980121000 980122000 980126000 980127500 980127600 BASE-401 BS-409 BS-405 BS-275 BS-220 BS-260 BS-3000 BS-2000 63

BURGLAR ALARM SYSTEMS PERIPHERAL DEVICES & ACCESSORIES BS-449/B BS-429/B MAGNETIC TRAPS FOR BS-418 BURGLAR ALARM PANELS BS-429/B Magnetic trap for burglar alarm panel (brown) 980142902 BS-429/W BS-439 BS-449/B BS-449/W Magnetic trap for burglar alarm panel (white) Magnetic trap for doors Magnetic trap for BS-418 (brown) low profile Magnetic trap for BS-418 (white) low profile 980142900 980143900 980144901 980144900 BS-459 Heavy-duty metallic magnetic trap 980145900 BS-490 NCCNO Magnetic trap 980149000 BS-424 CONTROLS FOR BS-418 BURGLAR ALARM PANELS BS-423 BS-424 BS-436 RF transmitter for alarm panel RF receiver for alarm panel Manual panic button 980142300 980142400 980143600 BS-436 BS-459 BS-490 BS-439 BS-429/W The BS-418 burglar alarm panel is the central panel of the system. On this unit we can connect all other devices which are used for activation (IR motion detectors, magnetic and impact traps) or indication and warning (sirens and telephone dialers) purposes. The panel can either be wall or recess (with A-632 base) mounted. The panel fully protects the monitored area via its six zones and the 24 hour zone. The connection wires are monitored continuously for open and short circuit conditions and the ANTI-TAMPER function assures that all the peripherals are not tampered with. The radars require 4 wires for connection purposes. Two wires are used for the power supply and two for the signal. The six zones of the panel can be used for connecting the IR motion detectors (radars) and the magnetic traps. If we want to install fire detection sensors such as the BS-655/12 or BS-660/12, then zone 6 must only be set to operate as a fire detection zone. The siren requires five wires for its installation. Two wires are used for the 12 VDC power supply, 1 wire for the isolation of the siren during the installation procedure and two for the TAMPER outputs. The magnetic traps are connected to the panel with 2 wires and give an alarm signal if the wires are cut. The TAMPER outputs of the peripherals are connected to the 24 hour zone. In this way we can connect IR motion detectors or magnetic traps that will operate on a 24 hour basis. We can also connect up-to 4 BS-428 control keyboards, each one with its own access code, to the panel. The keyboard has full control capabilities over the panel. It has a 4 digit LED display as well as 9 indication LEDs. (Power, Z1,Z2,Z3,Z4,Z5,Z6,SCI and CPU). Each keyboard can be programmed: - One general access code for ON-OFF operation and zone selection - One fire detection access code - Six auxiliary codes with ON-OFF control and zone selection with automation capabilities Newly designed keyboard -Elegant appearance -New colors Feel safe 64

WIRELESS BURGLAR ALARM SYSTEM CONTAINS: BSW-450 Control panel with 50 addresses BSW-453 Keypad with LCD ïèüíç screen BSW-454 Motion detector BSW-460 Door detector BSW-452 Internal siren BSW-458 Activation & deactivation key-fob WIRELESS BURGLAR ALARM SET BSW-464 Wireless burglar alarm KIT 980108400 It is a professional electronic security system that adjusts exactly to the requirements of your house or apartment. You have an overview of everything that is happening in your household or company via your mobile phone. You already have the essential part of the security system your mobile phone. Events from the guarded area can be also reported to a security services agency that in the case of burglary or possible fire emergency ensures immediate professional intervention on the spot. Your possessions are consequently taken care of despite that fact that you are on holiday or have your phone switched off. BS-450 BSW-452 BSW-453 BSW-460 BSW-461 CONTROL PANEL BSW-450 Control panel with 50 addresses 921450000 WIRELESS BURGLAR ALARM SYSTEM BSW-453 BSW-460 BSW-452 BSW-461 Keypad with LCD screen Door detector Internal siren Outdoor siren 980108003 980108008 980108002 980108009 BSW-450. Offers 4 hard wired zones, up to 50 user codes (cards). Built-in ready BSW-451 radio module provides up to 50 addresses for wireless peripherals. Allows 2 level partial setting (or 2 partitions splitting). Records 255 events in the internal memory. Provides audible warning and 2 programmable outputs. Remote access and reporting can be done via GSM,PSTN optional communicators. BSW-453. Allows system control and programming.has a built-in RFID card reader. BSW-460 Magnetic sensor senses door (or window) opening. Provides an input for external wired magnetic sensors. BSW-452Mains powered siren to sound alarms, exit and entrance warnings, door bell signals and smoke detector triggered chimes. Signals a tamper if disconnected (by AC operation voltage). BSW-461 Wire-free siren in a robust housing. Its lithium battery lifetime is from 3 to 5 years (depends on alarm rate). 65

WIRELESS BURGLAR ALARM SYSTEM System operational capability: The control panel can: up to 50 proximity user cards be operated remotely by phone up to 50 PIN codes (codes and cards can be combined for report selected events by SMS to your phone higher security) report all details to a Signal Receiving Centre remote control by mobile phone BSW-456 BSW-459 BSW-463 BSW-454 BSW-455 BSW-456 DETECTORS BSW-454 BSW-466 BSW-459 Motion detector Motion detector with camera & flash Glass break detector 980108004 980108401 980108500 BSW-455 BSW-456 Combined detector Fire detector 980108005 980108006 BSW-463 Outdoor motion detector 980108900 ACCESSORIES BSW-457 BSW-458 GSM module Activation & deactivation key-fob 980108007 980108600 BSW-462 Voice module 980108010 BSW-465 Photo transmission module for BSW-450 980108011 BSW-467 BSW-468 Wireless doorbell button External ANTENNA for signal support of the wireless alarm system 980108402 980108403 BSW-454. PIR sensor covers up to 112 square meters. Digital signal processing provides a high immunity to false signals. Can also be used to detect a door opening. BSW-466. For visual alarm verification. Takes a sequence of still pictures and transfers them by radio. The control panel has to be equipped with a BSW-465 data module to support picture transfer. Several detectors can be installed in the system. BSW-459. A sensor which can recognize glass breaking in a radius of 9 meters. Digital signal processing provides high immunity to false signals. Can also be installed in a car. BSW-455. Motion PIR/glass break sensor combination. Digital signal processing provides high immunity to false signals. BSW-463. Detects human body movement outside the house. Built-in double-zone PIRs assure resistance to falls alarms. The detection area can be set from 2 to 12 m. BSW-456. Combines an optical smoke sensor with a heat sensor. Has a built-in siren for local audible warning. BSW-457. A communicator using a GSM network. Allows remote access by mobile phone. Can report to a monitoring station or a cell phone. BSW-462. Reports alarms via voice messages and a PSTN telephone line. Up to 6 messages can be recorded and reported to up to 4 tel. numbers. Allows reporting to a Signal Receiving Centre (Contact ID protocol). 66

Led Alert OTHER CATEGORIES

CONTENTS CONTROL - WARNING UNITS DEVICE CONTROL THROUGH SMS AUTOMATIC TELEPHONE DIALERS NUMERATORS LED ALERT ADDRESSABLE MEDICAL PERSONNEL CALL SYSTEM NURSE CALL SYSTEM MOTION DETECTORS, SIRENS HOTEL ACCESS - CARD SWITCHES HOTEL ACCESS WITH RFID TECHNOLOGY HOTEL ACCESS - CARD SWITCHES ELECTRONIC ROOM THERMOSTATS DAILY / WEEKLY PROGRAMMABLE THERMOSTATS ELECTRONIC ROOM THERMOSTATS ELECTRO-MECHANICAL ROOM THERMOSTATS ELECTRIC INSECT TRAPS ELECTRIC INSECT TRAPS WITH GLUE ELECTRIC INSECT TRAPS WITH HIGH VOLTAGE GRID

CONTROL DEVICES WARNING UNITS CONTROL DEVICES - WARNING UNITS DEVICE CONTROL THROUGH SMS AUTOMATIC TELEPHONE DIALERS NUMERATORS LED ALERT ADDRESSABLE MEDICAL PERSONNEL CALL SYSTEM NURSE CALL SYSTEM MOTION DETECTORS, GENERAL PURPOSE SIRENS

CONTROL DEVICES - WARNING UNITS Automatic telephone dialer. Compatible with all types of burglar and fire alarm Simple operation. panels. 10 telephone memories with 20 digits each. Built-in microphone and speaker. Connection with analogue or digital telephone line. Produced in accordance with European Norms: TBR-21, 2 message playback and record capability (burglar EN61000-3-2, EN 61000-3-3 alarm and fire alarm) with two independent inputs IP-20 AUTOMATIC TELEPHONE DIALER BS-489 Automatic telephone dialer (10-30V DC) 921489000 Automatic telephone dialer with GSM assimilation Prompt notification in case of an alarm using cell phone capability. technology, even if the phone line has been interrupted. Phone line connection capability - using a automatic telephone dialer (BS-489) - and GSM operation. AUTOMATIC TELEPHONE DIALER WITH GSM ASSIMILATION CAPABILITY (Connection with BS-489). BS-488 Automatic telephone dialer with GSM assimilation capability (12V DC) 921488000 Data acquisition, device and system control & Standardized 4-position mounted box from ABS, PS. operation confirmation using SMS messages Capability of using different types of GSM antennas for 4 outputs (250V AC / 5A relays) better reception. DEVICE CONTROL THROUGH SMS Wi-DAC2 Device control through SMS (230V AC) 926000100 ÁÍ-100 Antenna 2.5m for Wi-DAC2 980110001 Wi-DAC is a small, high performance two-way communication device. It can be installed on any device or system to control and monitor their functions from a distance and report their status to your mobile phone via SMS. The device is totally autonomous. It consists of a modem and a microprocessor, as well as built-in relays. This way, it can execute your control commands which are sent to the unit via SMS, while responding at the same time to predefined mobile phone numbers. After its installation, according to the instructions provided, it operates without the need for any further intervention of the user. Ét operates with a simple SIM card of any mobile phone service provider, based either on contract or pre-paid service. Wi-DAC2 SMS Device control through SMS 70

MOTION DETECTORS & GENERAL PURPOSE SIRENS MOTION DETECTORS GR-54 GR-55 GR-53 IR Motion detector (IP54) (230V AC) IR Motion detector (230V AC) O Motion detector for ceiling mounting 360 (230V AC) 980305400 923055000 980305300 GR-53 BS-505 BS-546 BS-500 BS-545, BS-540 GR-54 GR-55 GENERAL PURPOSE SIRENS BS-500 BS-540 BS-545 BS-505 BS-546 General purpose telephone siren with dimmer 230V AC), 40-105dB General purpose siren (12-24VDC) with dimmer 0-100dB General purpose siren 230VAC, 0-100dB General purpose telephone siren with beacon 230V AC, with dimmer 105dB General purpose siren with beacon 230V AC, 100dB 921500000 921540000 921545000 921505000 921546000 BS-505/WP Waterproof, general purpose telephone siren with dimmer 230V AC 921505001 NUMERATORS LED ALERT Numerator panels are suitable for hotel and rented room installations. Their purpose is to inform us of any call coming from the monitored area. Controlled via a remote BS-746 keyboard (mounted in Presence indication mode displayed on the BS-746 the reception area). keyboard Room number programming and display indication Degrees of cover protection : IP 20. Network capability with up-to 5 BS-748 panels Produced in accordance with European norms: (240 rooms in total) ÅÍ60335-1 BS-716 The numerator series consists of the following units: The BS-716 is a 6 zone panel. It can monitor up-to 16 different areas with a numeration capability. The BS-748 is a 48 zone connection panel. It can be used to monitor up-to 48 different areas and requires the BS-746 keyboard to operate. The panel informs us by using audible and visual means. The call towards the panel is implemented by pressing a common push or pull-cord button. The BS-746 keyboard cooperates with the BS-748 connection panel and is used for displaying information concerning incoming call and for controlling and programming the system. BS-748 NUMERATORS LED ALERT BS-716 BS-746 BS-748 16 zone numerator panel Keyboard for BS-748 for numerator panel 48 zone numerator panel 921716000 921746000 921748000 BS-746 71

CONTROL DEVICES - WARNING UNITS ADDRESSABLE MEDICAL PERSONNEL CALL SYSTEM NURSE CALL SYSTEM The ADDRESSABLE MEDICAL PERSONNEL CALL SYSTEM is the new and reliable proposal from Olympia Electronics for hospitals, homes for the aged and the general medical attendance field with the following capabilities. Up-to 128 call units, 16 cancellation units and 16 isolation Full data logging of calls (time, date of each call unit connection capability. independently) Digital indication and location of the call point System malfunction warning Each device that is connected to the panel has its own Full programming capabilities using a personal computer. address and 16 character name which is user defined. Friendly operation menu in English 2 wire connection between the devices from which power and communication is achieved. NURSE ADDRESSABLE CALL PANEL AND PERIPHERAL DEVICES from the NURSE CALL SYSTEM series BSR-1156/N BSR-1157/N BSR-1114/N Nurse addressable call panel Repeat panel for nurse addressable call panel Remote display unit for BSR-1156/N 921115600 921115700 921111400 BSR-1114/N ADDRESSABLE PERIPHERAL DEVICES from the NURSE CALL SYSTEM series BSR-6090/N Áddressable call unit 921609000 BSR-7070/Á Áddressable line isolator 921707001 PERIPHERALS from the NURSE CALL SYSTEM series BSR-6070/N BSR-6072/N BSR-6074/N BSR-6091/N BSR-6092/N/R BSR-6092/N/G BSR-6093/N BSR-6094/N BSR-6096/N BSR-6098/N BS-531 A-1156 A-986 Call cancellation unit - recess mounted Call cancellation unit - external Call push button with 2m. cordon Ìulti call unit for BSR-6090/N Indication red LED Indication green LED Ìulti call and acknowledge unit for BSR-6090/N Call push button - 2m. cable Call push button - 2m. cable with indication LED Socket - call push button 24V DC Siren with beacon IP 42 Software & USB cable Lead Acid Battery Pb 12V/ 7Ah 921607000 921607200 921607400 921609100 921609200 921609201 921609300 921609400 921609600 921609800 921531000 927115600 603001270 BSR-7070/Á 72

HOTEL ACCESS CARD SWITCHES HOTEL ACCESS - CARD SWITCHES HOTEL ACCESS - CARD SWITCHES HOTEL ACCESS CONTROL SYSTEMS WITH RFID TECHNOLOGY

HOTEL ACCESS RFID - CARD SWITCHES ACCESS CONTROL UNITS FOR HOTEL INSTALLATIONS USING RFID TECHNOLOGY: DOOR LOCK, LIGHTING & AIR-CONDITIONING ACCESS CONTROL UNIT RFID ACCESS CONTROL SYSTEM FOR DOOR LOCKS, The RF-52 card switch is waterproof with IP 65 cover LIGHTING AND AIR-CONDITIONER ROOM CIRCUITS protection. A self-contained system that does not require a network Additional capability to recess mount the card switch by connection with all the hotel using the (Á-42) recess mounting base. Easy installation. Built in audible and visual indicator in RF-52 units show High security protection the operation status of the units. Modern design - low profile. RF-51/T card with laser printing (hotels logos and room Capability to program up-to 10 customer cards with lighting numbers). only or lighting & air-conditioner access. The RF-54 control unit has 2 relays 230V AC/25A and 1 Capability to program up-to 10 personnel card with access output for electric door locks 12V AC/DC-0,5A. Can be to all rooms. mounted on conventional electrical box rail mounts. DOOR LOCK ACCESS, LIGHTING & AIR-CONDITIONING CONTROL CIRCUITS WITH RFID TECHNOLOGY Easy and fast programming A-42 RF-52 RF-53 RF-54 IP 65 WATERPROOF & SUITABLE FOR RECESS MOUNTING RF-51, RF-51/Ô DOOR LOCK, LIGHTING AND AIR-CONDITIONING CONTROL CIRCUITS WITH RFID TECHNOLOGY RF-51 RF-51/Ô Access card Access card with laser printing 930051000 930051001 RF-52 IP 65 waterproof, RFID card switch for RF-54 (control unit) 930052000 RF-53 RFID card switch for RF-54 (control unit) 930053000 RF-54 Door lock, lighting and air-conditioner control unit (2x25A) 930054000 RF-58 RF-58/T A-42 Presence indicator LED (red & green LED) Presence indicator LED (red & green LED) with laser printing Recess mounting base 930058000 930058001 927042000 RF-58 ACCESSORIES - Rosettes for RF-58 & RF-58/T ROUNDED TYPE A-82/G A-82/SL A-82/Ni COLOUR CODE Gold 927082000 Silver-pink pearlescent 927082001 Nickel 927082002 SQUARE TYPE A-82/G/SQ A-82/SL/SQ A-82/W/SQ COLOUR CODE Gold 927082003 Silver-pink pearlescent 927082004 White 927082005 RF-58/T A-82/G A-82/SL A-82/Ni *In the price of RF-58 & RF-58/T included one of the rosettes above. Please define during the order the type you require using the codes. A-82/ G/SQ A-82/ SL/SQ A-82/ W/SQ BS-429/B BS-429/W MAGNETIC TRAPS BS-429/B Magnetic trap for burglar alarm panel (brown) 980142902 BS-429/W Magnetic trap for burglar alarm panel (white) 980142900 74

HOTEL ACCESS RFID - CARD SWITCHES ACCESS CONTROL UNITS FOR HOTEL INSTALLATIONS USING RFID TECHNOLOGY: LIGHTING & AIR-CONDITIONING ACCESS CONTROL UNIT LIGHTING & AIR-CONDITIONING CONTROL UNITS WITH RFID TECHNOLOGY THE RFID ACCESS CONTROL SYSTEM FOR Respectively you can order cards with laser printed LIGHTING AND AIR-CONDITIONER ROOM CIRCUITS logos and room numbers by using the order codes RF- The cards used for accessing the lighting and airconditioning 51/Á/Ô êáé RF-51/Â/Ô. of a room are not programmed by the The RF-57 control unit has 2 relay outputs 230V user. During the order use the respective code AC/25A. depending on the type of card that is required. For The A/C circuit is active only if the windows are closed. lighting only access order code (RF-51/Á), and for This is accomplished only if the magnetic window lighting and air-conditioning access order code (RF- contacts are used. 51/Â). RF-58 & RF-58/T Suitable for hotels and rented rooms Suitable for installation in standardized switch boxes The room number can be laser printed in its interface Modern design, slim size RF-51/A RF-51/A/T RF-57 RF-43 RF-58/T RF-58 LIGHTING & AIR-CONDITIONING CONTROL UNITS WITH RFID TECHNOLOGY RF-43 RFID card switch for RF-57 (control unit) 930043100 RF-51/A RF-51/A/Ô RF-51/B RF-51/B/Ô RF-57 Access card for lighting Access card with laser printing for lighting Access card for lighting and air-conditioning Access card with laser printing for lighting and air-conditioning Control unit for lighting and air-conditioning 930051002 930051004 930051003 930051005 930057001 RF-58 Presence indicator LED (red & green LED) 930058000 RF-58/T A-42 Presence indicator LED (red & green LED) with laser printing Recess mounting base 930058001 927042000 ACCESSORIES - Rosettes for RF-58 & RF-58/T ROUNDED TYPE A-82/G A-82/SL A-82/Ni COLOUR CODE Gold 927082000 Silver-pink pearlescent 927082001 Nickel 927082002 SQUARE TYPE A-82/G/SQ A-82/SL/SQ A-82/W/SQ COLOUR CODE Gold 927082003 Silver-pink pearlescent 927082004 White 927082005 A-82/G A-82/SL A-82/Ni *In the price of RF-58 & RF-58/T included one of the rosettes above. Please define during the order the type you require using the codes. A-82/ G/SQ A-82/ SL/SQ A-82/ W/SQ MAGNETIC TRAPS BS-429/B Magnetic trap for burglar alarm panel (brown) 980142902 BS-429/W Magnetic trap for burglar alarm panel (white) 980142900 BS-429/B BS-429/W 75

HOTEL ACCESS - CARD SWITCHES Card-key with logo printing area. Room lighting and air-contitioning control device with Capability to print logos and room numbers on the card. 2x16Á outputs GR-44 magnetic cards for GR-43 and GR-50 units. Produced in accordance with European norms: GR-49 regular card for GR-48 units. ÅÍ60335-1 GR-43. Card switch for GR-45, GR-46 and GR-47 & GR-57 GR-50. Magnetic card switch with an output suitable for units. It has an indication LED which is lit when the unit is activating a common 230VAC relay on an electric panel. not activated, to show the units location in the dark. GR-52. Presence indication LED. It is placed outside the GR-45. Air-contioner control unit. It operates in room and is connected to the GR-46 or GR-47 units thus cooperation with a magnetic door trap. showing the presence of a person inside. GR-46. Room lighting control unit. It operates in GR-56. Room lighting control unit with 30Á output. It cooperation with the GR-43 unit. operates in cooperation with the GR-43 unit. GR-47. Room lighting and air-conditioner control unit. It GR-57. Room lighting and air-conditioner control unit operates in cooperation with a magnetic door trap and the with two 30Á outputs. It operates in cooperation with a GR-43 unit. magnetic door trap and the GR-43 unit. GR-48. Common (non-magnetic) lighting control unit with an output of 230VAC/5A. GR-56 GR-57 GR-44/T GR-49/T RF-58/T RF-58 GR-43, GR-48, GR-50 MAGNETIC CARD SWITCHES GR-43 GR-50 GR-44 GR-44/Ô Magnetic card switch for GR-45, GR-46, GR-47, GR-57 Magnetic card switch for relay connection Magnetic card for GR-43 & GR-50 Magnetic card for GR-43 & GR-50 with laser printing 930043000 930050000 930044000 930044100 CONTROL UNITS GR-45 GR-46 GR-47 GR-56 GR-57 Air-conditioner controller (1x16) Room lighting controller (1x16) A/C and lighting controller (2x16) Room lighting controller (30Á) Room lighting & air-conditioner controller (2x30Á) 930045000 930046000 930047000 930056000 930057000 GR-48 GR-52 COMMON CARD SWITCHES GR-48 GR-49 GR-49/T INDICATORS Power supply card switch Card for GR-48 Card for GR-48 with laser printing *Accessories for RF-58 & RF-58/T go to pg. 75 930048000 930049000 930049100 GR-52 Presence indicator LED 923052000 RF-58 Presence indicator LED (red & green LED) 930058000 RF-58/T Presence indicator LED (red & green LED) with laser printing 930058001 BS-429/W BS-429/B MAGNETIC TRAPS BS-429/B Magnetic trap for burglar alarm panel (brown) 980142902 BS-429/W Magnetic trap for burglar alarm panel (white) 980142900 76

ELECTRONIC ROOM THERMOSTATS ELECTRONIC ROOM THERMOSTATS DAILY / WEEKLY PROGRAMMABLE THERMOSTATS ELECTRONIC ROOM THERMOSTATS ELECTRO-MECHANICAL ROOM THERMOSTATS

ELECTRONIC ROOM THERMOSTATS Elegant appearance Power supply indication LED Easy installation Relay activation LED 220-240 AC / 50-60Hz power supply IP 20 degrees of cover protection Boiler output (BS-805, BS-817) Produced in accordance with: ÅÍ60335-1 LCD graphical display Construction material: polycarbonate Daily and weekly programming capability (BS-816, BS- 817 & BS-901). The BS-804 and BS-805 models which are electronic thermostats with digital temperature indications. The BS-805 also has a n output for boiler use. The models BS-816 and BS-817 can operate as daily or weekly programmable thermostats. They can be programmed with 10 different programs. ELECTRONIC ROOM THERMOSTATS BS-804 Electronic room thermostat with LCD display 940804000 BS-805 Electronic room thermostat - boiler output with LCD display 940805000 PROGRAMMABLE ELECTRONIC ROOM THERMOSTATS BS-816 BS-816/SL BS-817 BS-817/SL Programmable room thermostat with LCD display Programmable room thermostat with LCD display (silver) Programmable room thermostat - boiler output, LCD display Programmable room thermostat - boiler output with LCD display (silver) 940816000 940816002 940817000 940817001 BS-900 ELECTRO-MECHANICAL ROOM THERMOSTATS BS-900 BS-901 Electro-mechanical room thermostat Electro-mechanical room thermostat, boiler output 980190000 980901000 Two models are available in this series. The BS-816 thermostat with one output relay used for connecting a circulator and the BS- 817 thermostat with 2 output relays used for connecting a circulator and a boiler. Both models have a graphical LCD display and control panel. BS-816/SL, BS-817/SL Boiler operation indicator (only on BS-817) Auto program intervention indicator The display shows numerous symbols and messages used to interact with the user. The diagram below shows all existing symbols. Desired temperature Real temperature Thermostat situation SUNDAY Heating mode indicator (In cooling mode AC is shown) Proportional clock Information 78

ELECTRIC INSECT TRAPS ELECTRIC INSECT TRAPS ELECTRIC INSECT TRAPS WITH GLUE ELECTRIC INSECT TRAPS WITH HIGH VOLTAGE GRID

ELECTRIC INSECT TRAPS WITH HIGH VOLTAGE GRID Elegant appearance Research proven, UV insect attracting lighting Easy installation All models operate using special Black Light (BL) tubes Two portable models (RT-11, RT-12) UV resistant plastic parts A full range of professional models for large areas Construction material: Fire retardant ABS, electrostaticpainted Special models with mirror for wall mounting aluminum installations (RT-14/6, RT-14/7, RT-15/6, RT-15/7). Produced in accordance with: ÅÍ60335.02.59 Easy to clean insect collecting drawer ELECTRIC INSECT TRAP WITH HIGH VOLTAGE GRID RT-11 Electric insect trap - BL 2 x 8W lamp (covering 40 sq.m) 925011000 ELECTRIC INSECT TRAP WITH HIGH VOLTAGE GRID RT-12 Á-1024 Electric insect trap - BL 2 x15w lamp (covering 80 sq.m) Protective grid (transparent) for RT-12 925012000 801822012 ELECTRIC INSECT TRAPS WITH HIGH VOLTAGE GRID (SUITABLE FOR PROFESSIONAL USE) RT-14 Electric insect tr ap - BL 3 x20w lamp (covering 160 sq.m) 925014000 RT-14/2 Electric insect tr ap - BL 2 x 20W lamp (covering 160 sq.m) 925014001 SPECIAL MODEL WITH MIRROR FOR WALL MOUNTING INSTALLATIONS RT-14/7 Electric insect trap - BL 3 x 20W lamp (covering 160 sq.m) 925014005 ELECTRIC INSECT TRAP WITH HIGH VOLTAGE GRID (SUITABLE FOR PROFESSIONAL USE) RT-15 Electric insect trap - BL 3 x 40W lamp (covering 360 sq.m) 925015000 The electric insect traps are used to exterminate various disturbing insects. They have special insect attracting black light tubes used to attach insects from a greater distance. They can be used in any area where many insects exist. They have an internal grid with a high voltage (2 to 4KV depending on the model) and an external grid used for protecting humans,animals,birds that might come close. They protect us from all types of insects that are attracted by the special light (mosquitoes,flies, gnats, e.t.c.) without using any chemicals. The incorporated insect collecting drawer can be easily removed and cleaned when it is full. They are mounted on a high and visible area in order to attract as many insects as possible. 80

HACCP ELECTRIC INSECT TRAPS WITH SPECIAL GLUE Environmental friendly. No chemical induced dangers. Research proven insect attracting UV lighting. Constructed according to HACCP regulations. Does not use high voltage grids. Table mounted installation capability (special accessory) Glue trap, resistant to UV rays and high temperature. Constructional material: Fire retardant ABS, electrostatically painted aluminum. Produced in accordance with : ÅÍ60335.02.59 In the food and beverage industry it is mandatory to adhere to HACCP regulation, according to which it is prohibited to use chemicals and high voltage grids in the construction of electric insect traps. In replacement to the high voltage grid, a special factory inspected glue trap is used. The respective legislative regulation are ÔL/195/97-CE93/43 and 96/3 of European council on the 14th of June 1993. This specific legislation is mandatory for the whole of the food industry as well as the food service industry (restaurants, candy shops, bakeries, meat and super markets e.t.c). The new product RT-1 combines the use as a portable insect trap and as a night light. It s blue light has a special frequency which attracts insects and offers a special replaceable trap sheet. The coverage area is approximately one room. ELECTRIC INSECT TRAPS WITH GLUE from the DELUXE FLYTRAP series RT-30 Electric insect trap - BL 2 x 8W lamps (covering 40 sq.m) 925030000 RT-30/SL Electric insect trap - BL 2 x 8W lamps (covering 40 sq.m), silver 925030100 RT-30/HACCP Electric insect trap - BL/HACCP 2 x 8W lamps (covering 40 sq.m) 925030200 RT-30/HACCP/SL Electric insect trap BL/HACCP 2 x 8W lamps (covering 40 sq.m), silver 925030300 RT-36 RT-36/SL Electric insect trap PL 26W lamps BL (covering 60 sq.m) Electric insect trap PL 26W lamps BL (covering 60 sq.m), silver 925036000 925036100 REPLACEMENTS from the DELUXE FLYTRAP series A-1030 A-1046 A-1048 Protective bird grid (in case of external use) Glue board for Deluxe Fly (6 pieces) Glue board for Deluxe Fly (12 pieces) 980103000 927104600 927104800 ELECTRIC INSECT TRAPS WITH GLUE from the FOODY`S FLYTRAP series RT-22 RT-22/HACCP RT-24 RT-24/HACCP Electric insect trap BL 2x15W lamps (covering 80 sq.m) Electric insect trap BL/HACCP 2x15W lamps (covering 80 sq.m) Electric insect trap BL 4x15W lamps (covering 160 sq.m) Electric insect trap BL/HACCP 4x15W lamps (covering 160 sq.m) 925022000 925022100 925024000 925024100 REPLACEMENTS from the FOODY`S FLYTRAP series A-1050 Glue board for RT-22 (single sided) 927105000 A-1052 Glue board for RT-24 (double sided) 927105200 Á-1024 Protective grid (transparent) for RT-22 & RT-24 801822012 ELECTRIC INSECT TRAPS WITH GLUE from the PROFESSIONAL DELUXE FLYTRAP series RT-50/HACCP Electric insect trap BL/HACCP 1 x 20W lamps(covering 80 sq.m) 925050000 RT-52/HACCP RT-60/HACCP RT-62/HACCP Electric insect trap BL/HACCP 2 x 20W lamps(covering 160 sq.m) Electric insect trap BL/HACCP 1 x 40W lamps(covering 180 sq.m) Electric insect trap BL/HACCP 2 x 40W lamps(covering 360 sq.m) 925052000 925060000 925062000 REPLACEMENTS from the PROFESSIONAL DELUXE FLYTRAP series A-1066 A-1068 Glue board for Deluxe Fly (6 pieces) Glue board for Deluxe Fly (12 pieces) 927106600 927106800 81

SOLARIS Shopping Center, Estonia

MARKING SIGNS REPLACEMENTS ACCESSORIES INDEX