AQUASNAP TM AQUASNAP LIQUID CHILLERS HEAT PUMPS 30RA/30RH AIR CONDITIONING MADE SIMPLE
BOLT DOWN, PLUG IN... READY THE IDEAL ALL-IN-ONE SOLUTION With the Aquasnap everything is included to reduce the complexity of the installation. All hydronic components are integrated: circulating pump, expansion tank, filter, safety elements etc. You only need to connect it to your system. Simple! You do not lose time selecting the hydronic components or dealing with several suppliers. No time is lost for installation and commissioning on site everything has been mounted and tested in the factory. More peace-of-mind. SIMPLE ELECTRICAL CONNECTION Child s play! The Aquasnap can be connected quickly and easily. No more complicated electrical wiring and no time lost on site. A standard main disconnect switch, a 24 V control circuit for improved safety, and a single three-phase power supply without neutral - the Aquasnap has been designed to save you time.
PEACE-OF-MIND FOR ALL SEASONS CONSTANTLY MONITORED COMPRESSORS To achieve a fast and efficient response and anticipate critical situations, the Pro-Dialog control constantly checks and analyses all compressor operating parameters: pressures, temperatures, number of start-ups. The result: the compressor always operates within the ideal operating range. In addition, a Carrier-patented auto-adaptive algorithm intelligently controls compressor start-ups and constantly adjusts to prevent excessive cycling. As the compressor is always monitored, the system water volume can be significantly reduced. With unequalled performances and exceptional technical characteristics, hot and cold water production is never interrupted. Safe operation for optimum reliability. GAS AN INNOVATIVE AND RELIABLE REFRIGERANT SYSTEM The refrigerant circuit is entirely welded for perfect and lasting leak-tightness. No capillary tubes. No check valves. Only one expansion device on the heat pump. Why complicate things, when they can be so simple? Everything has been conceived and designed for maximum reliability. The receiver/heat exchanger in the Aquasnap heat pumps ensures that the units operate with the ideal refrigerant charge, both in heating and in cooling mode. This Carrier-patented device compensates for the difference in refrigerant quantity between coil and plate heat exchanger. The result? No matter what the outside conditions are, the heat exchangers are always used to their maximum capacity, and the compressors are always protected against liquid refrigerant migration. LIQUID LOW-NOISE COMPRESSORS SUBCOOLED LIQUID SUPERHEATED GAS Fewer decibels for increased comfort. The scroll compressors used in the Aquasnap are renowned for their ultra-quiet and vibration-free operation. They are durable and reliable, and their motor is cooled by suction gas to allow up to 12 start-ups per hour. Plus: they require no maintenance. Assured peace-of-mind.
A FAN RENOWNED FOR ITS EXTREME DISCRETION Controlled noise. Aquasnap is equipped with the ultra-quiet Flying Bird fan to ensure unrivalled sound quality. The secret? A fan wheel made of a composite material with a rotating shroud that eliminates leakage between the fan blades and shroud for extremely low noise levels without peaks in the low-frequency range. A tower chassis, designed to prevent the transmission of vibrations to the rest of the structure. A two-speed motor that automatically selects the low fan speed, when outside temperature and heat load are reduced for example during the night. Noise has never been so discreet! PRO-DIALOG POWERFUL CONTROL Pro-Dialog is an ingenious control system! It manages compressor, fan and water pump operation, optimises electrical energy demands and supervises all technical parameters. It also offers several remote control facilities: start/stop, dual set point, demand limit, alarm report etc. Pro-Dialog can also control two units operating in parallel. For the Aquasnap heat pump there is an option to control a supplementary electric heater. EASY-TO-USE CONTROL SYSTEM The Pro-Dialog operator interface is clear and user-friendly: LEDs and numerical displays ensure immediate verification of the unit operating parameters. A simple push of a button on the synoptic Aquasnap diagram gives you immediate display of temperatures, pressures, set point, compressor run times and number of start-ups. Moreover, ten access menus, one especially designed to follow the fault history, ensure accurate control and precise fault diagnosis.
YEAR-ROUND EFFICIENCY FROM 10 C TO +45 C YEAR-ROUND ECONOMICAL OPERATION Whether it snows or the sun shines, Aquasnap can handle all climatic conditions. With its control algorithm that intelligently regulates fan operation, it operates reliably and safely from 10 C to +45 C, without an accessory. For increased savings, Aquasnap automatically adjusts the leaving water temperature in both heating and cooling mode. And when the building is unoccupied the chiller or heat pump operates on a second set point. In Aquasnap heat pumps change-over is automatic, based on the outside air temperature: heating or cooling for enhanced comfort in autumn and spring. Guaranteed savings! PROTECTING OUR ENVIRONMENT From now on you no longer need to choose between ecology and economy. Refrigerant R-407C has no impact on the ozone layer and complies with current and future regulations on environmental protection. And because the heat exchangers were specifically designed for the thermodynamic characteristics of R407C, the Aquasnap performances are even superior to those of R-22 - without extra cost. Less pollution and more savings everybody wins!
EUROVENT CERTIFIED PERFORMANCE Carrier actively participates in the Eurovent certification programmes. Eurovent is an independent organisation that tests products and verifies the conformance between test results and data published by the manufacturer. Eurovent certification is an important guarantee for consultants and installers. They can be sure that a product with Eurovent certification will operate in conformance with the specifications and satisfy customer requirements. The Aquasnap chillers and heat pumps come with Eurovent certification. TECHNICAL DATA 30RA/RH 040 050 060 070 080 090 100 120 140 160 200 240 TECHNICAL DATA 30RA/30RH Cooling capacity 30RA* kw 39 49 57 67 79 89 97 115 135 151 198 245 Heating capacity 30RH** kw 38 45 57 65 78 85 96 116 130 153 194 230 Cooling capacity 30RH* kw 38 44 54 66 71 83 92 106 132 142 179 210 Refrigerant No. of refrigerant circuits 1 1 1 1 1 2 2 2 2 2 2 2 Compressor: type/quantity Scroll 1 Scroll 2 Scroll 3 Scroll 4 Scroll 5 Scroll 6 Water pump: type R407C Centrifugal monocell Available pressure, water pump* kpa 141 136 133 121 147 124 114 168 147 116 195 230 Length mm 2071 2071 2071 2071 2071 2071 2071 2071 2071 2071 3351 3351 Depth mm 1081 1081 1081 1081 1081 2278 2278 2278 2278 2278 2279 2279 Height mm 1329 1329 1329 1329 1329 1329 1329 1329 1329 1329 1674 1674 Operating weight 30RA kg 526 584 597 611 631 1093 1106 1205 1212 1248 2133 2305 * Nominal Eurovent conditions: air 35 C, water 12/7 C ** Nominal Eurovent conditions: air 7 C, water 40/45 C OPTIONS AND ACCESSORIES Condenser anti-corrosion treatment for marine applications Condenser anti-corrosion treatment for industrial applications (30RA) Compressor with electronic starter (30RA/RH 040-080) Leaving water temperature down to -10 C (30RA) Hydronic module with dual water pump Unit without hydronic module Ultra low-noise unit Winter operation down to 20 C (30RA 040-160) Communication gateway with J Bus, LON or BAC net PROTOCOLS Supplementary/safety electric resistance heater control module (30RH) AQUASNAPTM THE ALL-IN-ONE RANGE 30RA/30RH COOLING ONLY/HEAT PUMPS 17-250 kw 30RY/30RYH DUCTABLE COOLING ONLY/HEAT PUMPS 17-80 kw 30RW WATER-COOLED UNITS 20-300 kw Dixit JM - RCS Lyon B 353 000 870 - Printed in France Quality Management System Approval Environmental Management System Approval Order No.: 18177-20-11/2005 Supersedes order No.: 18177-20-01/2004 Manufacturer reserves the right to change any product specifications without notice. A member of the United Technologies Corporation family