WOOD > FIREPLACES WOOD
TECHNOLOGIES OYSTER The new clean technology for the houses of the future. ACQUAPLUS An easy and inexpensive system for recovering all the heat in your fireplace. ACTIVE Smart technology where the stove or fireplace decide for themselves the best way to run. COMFORT AIR A wood and pellet burning heating system that stands out from the rest. 4 5
COMFORT AIR SLIM/BASIC Pat. Pend. n. PN2008U000004 ALUTEC HOT AIR OUTLETS CAN BE POSITIONED UP TO 8 METRES AWAY, AS YOU WISH. Comfort Air can effectively carry the warm air into other rooms up to a maximum distance of 8 real metres with an output temperature of up to 80 C. Unlike traditional systems in which the hot air outlets must be positioned at the top, the Comfort Air outlets can be positioned as you wish, with obvious architectural and aesthetic advantages. EASY INSTALLATION AND MAINTENANCE. Thanks to the use of significantly lower diameters (60 mm and 100 mm) compared to the market standard, Comfort Air provides easier insertion of the ducting into the wall, limiting the necessary masonry work, which often takes time and can be very invasive. Moreover, the maintenance of fans is easy, since they are located in the hot air outlets (Basic) or between the glass-fronted fireplace and the hot air outlets (Slim). TOTAL CONTROL OF AIR CIRCULATION. Thanks to the two independent electrically adjustable fans (in stoves) and the electronic control unit that can control up to two ducts (in glass-fronted fireplaces), Comfort Air allows precise control of heat distribution between the different rooms where the air is ducted. MORE LIGHT FOR THE FLAME. Alutec is an MCZ patented material widely used in the fire boxes of stoves and glass-fronted fireplaces. The light-coloured mixture with a high aluminium oxide content gives great luminosity to the flame and increases the power of the reflected heat. What s more, by storing up heat, it also makes for excellent combustion. REMOTE CONTROL. Many of MCZ's pellet products are GSM READY, in other words designed for activation via remote connection to the modem on your GSM mobile phone. RELAX > This is the solution which foresees a remote control with few keys and a host of preset programmes (switch on and switch off). In addition, a room thermostat has been incorporated into the remote control to allow greater temperature control. EASY > A simplified solution featuring a control panel located on the stove, with easy and intuitive functions. GREATER EFFICIENCY WITH LOWER CONSUMPTION LEVELS. Comfort Air from MCZ extracts the heat produced by the glass-fronted fireplaces with greater efficiency by means of an extractor located in the glass-fronted fireplace outlet. Compared to traditional systems, Comfort Air allows you to increase the heat introduced into the room by 30%. This provides rapid, uniform distribution and allows you to save fuel. CLEAN AND SCENTED WARM AIR. (In this glass-fronted fireplace application) The Comfort Air system filters the entering air drastically limiting the entry of dust into the room. The filter is easy to extract and clean. The hot air outlets can be positioned as desired for rational air distribution, choosing among the various Slim and Basic models. (When applied to a fireplace) a tank located inside the Flip, Float, Ghost and Mono 20 hot air outlets contains water that vaporises when the hot air exits the system. This ensures correct humidification of the room. Fragrances and essences can be added to the tank for a pleasant aromatherapy effect. MORE AIR, LESS NOISE. Greater efficiency than traditional systems in terms of air released into the room and a significantly lower noise level. SYMBOLS USED Nominal heat output Efficiency Diameter of smoke outlet pipe Right corner Left corner Right corner with bench Left corner with bench ACTIVE Weight Dimensions - width x depth x height Wall with right-hand bench Wall with left-hand bench PELLET TYPE IS NO LONGER A PROBLEM. Because the stoves equipped with the Active system adapt automatically to any pellet length and with a diameter of 6-8 mm. BURNING THE BEST, ALWAYS. Thanks to the extremely reliable and accurate sensor inside the stove, the combustion air is constantly adjusted according to the quantity of pellets present in the grate, thus ensuring effective and efficient combustion, which translates into lower consumption, lower emissions and much less frequent cleaning. FACILITATED INSTALLATION. The combustion is effective and efficient regardless of the type of flue pipe connection which with conventional systems can be a problem during installation. Fluid heat output Minimum room volume Wall Semi-recessed wall 45 corner 11 12 1 10 2 Hourly consumption 9 3 8 4 7 6 5 45 corner with right-hand bench OYSTER Fire box dimensions 45 corner with left-hand bench FULLY WATERTIGHT. Products built with Oyster technology, due to their fully watertight structure, do not draw on the oxygen inside the room. Instead, they draw air from the outside and can therefore be fitted in any properly insulated homes and in passive houses. SAFE AND SECURE ENVIRONMENT. This technology eliminates all risk of smoke being released into the room. VENTILATION GRILLES NO LONGER REQUIRED. Forget the annoying flow of cold air that makes the room less comfortable, compromising the overall efficiency of the system and, in some cases, ruining the aesthetic "cleanliness" of the walls. 6 7
STRIPE Overnight 7112201 1.800,00 secondary air combustion control system with push/pull system. Heat accumulation system with refractory material. Rear smoke outlet pipe also available. Self closing door. Cast iron: door, fire bed Stripe Black metal_303 6912001 450,00 Aluminium metal_315 6912002 450,00 Rear smoke outlet 90 elbow Rear smoke outlet closing plug included. 4012001 80,00 STUB Stub 7112203 1.700,00 VERSION WITH TOP SMOKE OUTLET PIPE secondary air combustion control system with push/pull system. Self White ceramic_102 6912006 550,00 closing door. Black ceramic_107 6912003 550,00, door Concrete grey_117 6912022 600,00 Ceramic: sides, front panels kw 7 81 % Ø cm 15 kg 190 cm 53,8 x 45,6 x 145 kw 7 81 % Ø cm 15 kg 140 cm 51,5 x 51,5 x 116,5 86 87
Stub 7112203 1.700,00 Stub 7112203 1.700,00 White ceramic_102 6912024 600,00 White ceramic_102 6912008 1.150,00 Black ceramic_107 6912023 600,00 Black ceramic_107 6912005 1.150,00 Concrete grey_117 6912025 650,00 Concrete grey_117 6912027 1.200,00 STUB STUB Overnight VERSION WITH REAR COMBUSTION AIR INLET AND/OR REAR SMOKE OUTLET PIPE secondary air combustion control system with push/pull system. Self closing door. Ceramic: sides, front panels DUCTED REAR COMBUSTION AIR VERSION secondary air combustion control system with push/pull system. Heat accumulation system with refractory material. Self closing door. Ceramic: cladding kw 7 81 % Ø cm 15 kg 140 cm 51,5 x 55,5 x 116,5 Stub 7112203 1.700,00 kw 7 81 % Ø cm 15 kg 230 cm 51,5 x 55,5 x 158 Stub 7112203 1.700,00 White ceramic_102 6912007 1.100,00 White ceramic_102 6912008 1.150,00 Black ceramic_107 6912004 1.100,00 Black ceramic_107 6912005 1.150,00 Concrete grey_117 6912026 1.150,00 Concrete grey_117 6912027 1.200,00 Rear smoke outlet 90 elbow Rear smoke outlet closing plug included. 4012001 80,00 STUB Overnight STUB Overnight UPPER SMOKE OUTLET AND DUCTLESS COMBUSTION AIR VERSION secondary air combustion control system with push/pull system. Heat accumulation system with refractory material. Self closing door. Ceramic: cladding REAR SMOKE OUTLET AND DUCTED COMBUSTION AIR VER- SION secondary air combustion control system with push/pull system. Heat accumulation system with refractory material. Self closing door. Ceramic: cladding kw 7 81 % Ø cm 15 kg 230 cm 51,5 x 55,5 x 158 kw 7 81 % Ø cm 15 kg 230 cm 51,5 x 55,5 x 158 88 89
Bahr 7111201 1.280,00 Veld 7111203 1.590,00 White ceramic_102 6911003 150,00 White ceramic_102 6911009 530,00 Warm grey ceramic_113 6911004 150,00 Warm grey ceramic_113 6911010 530,00 Bordeaux ceramic_105 6911005 150,00 Bordeaux ceramic_105 6911011 530,00 Black ceramic_107 6911006 150,00 Black ceramic_107 6911012 530,00 Air ventilation kit Complete with switch and probe. 250 m 3 /h 4011014 165,00 BAHR Sealed wood-burning stove with natural convection. Rear smoke outlet pipe also available. Ceramic: top Cast iron: door, fire bed VELD Sealed wood-burning stove with natural convection. Designed for integration with tangential fan. Ceramic: sides, front panels Cast iron: door, top, base, fire bed kw 7 84,7 % Ø cm 15 kg 135 cm 55 x 47,4 x 101,1 kw 7 84,7 % Ø cm 15 kg 135 cm 53,5 x 45,5 x 112,4 Kasai 7111202 1.450,00 Sava 7111204 2.300,00 Black metal_303 6911007 440,00 White ceramic_102 6911013 680,00 Aluminium metal_315 6911008 440,00 Warm grey ceramic_113 6911014 680,00 Air ventilation kit Complete with switch and probe. 250 m 3 /h 4011014 165,00 Bordeaux ceramic_105 6911015 680,00 Black ceramic_107 6911016 680,00 Air ventilation kit Complete with switch and probe. 250 m 3 /h 4011014 165,00 KASAI Sealed wood-burning stove with natural convection. Designed for integration with tangential fan or with Comfort Air kit. Rear smoke outlet pipe also available. Aluminium: front frame Cast iron: door, front panel, fire bed Comfort Air ducting kit To duct hot air to rooms adjacent to the room in which the stove is installed. It includes: radial fan, potentiometer, housing, probe and switch. Pipes and hot air outlets not included. > p. 100 4012026 215,00 SAVA Sealed wood-burning stove with natural convection equipped with an oven. Ceramic: sides, front panels Cast iron: door, top, base, fire bed kw 9 84,5 % Ø cm 15 kg 150 cm 53,6 x 47,2 x 112 kw 7 84,7 % Ø cm 15 kg 165 cm 53,5 x 45,5 x 145,5 90 91
Nogal 7111205 1.390,00 Pulsar 360085 1.950,00 White ceramic_102 6911017 150,00 Red ceramic_108 367135 610,00 Serpentino_240 6911018 180,00 Salt and pepper ceramic_110 367136 540,00 Bordeaux ceramic_105 6911019 150,00 Sand ceramic_109 367137 540,00 Black ceramic_107 6911020 150,00 Bordeaux ceramic_105 367138 540,00 Air ventilation kit Complete with switch and probe. 250 m 3 /h 4011014 165,00 NOGAL PULSAR Sealed wood-burning stove with natural convection. Designed for integration with tangential fan. Rear smoke outlet pipe also available. Ceramic: top (also available in soapstone) Cast iron: door, fire bed Wood-burning stove with natural convection. Ceramic: sides, top WHILE STOCKS LAST kw 7 84,7 % Ø cm 15 kg 135 cm 51,5 x 48 x 98 kw 8 85,3 % Ø cm 15 kg 140 cm 54,8 x 46,8 x 111,5 VERSIONS Chari 7111206 1.450,00 Black ceramic_107 (top) Silver metal_313 (sides) 70230 2.100,00 White ceramic_102 6911021 430,00 Warm grey ceramic_113 6911022 430,00 Soapstone_202 (top) Black metal_303 (sides) 70231 2.200,00 Bordeaux ceramic_105 6911023 430,00 Old amber ceramic_111 6911024 430,00 Air ventilation kit Complete with switch and probe. 250 m 3 /h 4011014 165,00 CHARI NADIR Sealed wood-burning stove with natural convection. Designed for integration with tangential fan or with Comfort Air kit. Rear smoke outlet pipe also available. Ceramic: top, front and side tiles Cast iron: door, base, fire plane Comfort Air ducting kit To duct hot air to rooms adjacent to the room in which the stove is installed. It includes: radial fan, potentiometer, housing, probe and switch. Pipes and hot air outlets not included. > p. 100 4012026 215,00 Wood-burning stove with natural convection. Painted metal: sides Ceramic/Soapstone: top kw 9 84,5 % Ø cm 15 kg 150 cm 51,6 x 47,6 x 116 kw 8 85,3 % Ø cm 15 kg 140 cm 52 x 48,7 x 111,5 92 93
ceramic Quasar 360031 1.800,00 Venus 360017 1.380,00 Bordeaux ceramic_105 367066 680,00 Cream ceramic_104 367046 480,00 Salt and pepper ceramic_110 367067 680,00 Bordeaux ceramic_105 367048 480,00 Sea blue ceramic_114 367068 680,00 Sea blue ceramic_114 367074 480,00 Sand ceramic_109 367069 680,00 Sand ceramic_109 367075 480,00 Soapstone_202 367062 700,00 Ventilation kit 170 m 3 /h 40160207 130,00 QUASAR ceramic Wood-burning stove with natural convection. Ceramic: sides, top kw 7,9 78,3 % Ø cm 15 kg 180 cm 53,5 x 48 x 112,4 VENUS Wood-burning stove with natural convection (optional: forced ventilation kit). Ceramic/soapstone: sides, top, ash retainer, riddling grate kw 7,4 84,6 % Ø cm 15 kg 170 cm 54 x 46,2 x 102 WHILE STOCKS LAST steel Quasar 360030 1.990,00 Zenit 360009 1.650,00 Black ceramic_107 367089 50,00 Cream ceramic_104 367026 115,00 Bordeaux ceramic_105 367028 115,00 Sea blue ceramic_114 367076 115,00 Soapstone_202 367090 170,00 QUASAR steel Wood-burning stove with natural convection. Ceramic/soapstone: front top kw 7,9 78,3 % Ø cm 15 kg 180 cm 52,4 x 49 x 111 ZENIT Wood-burning stove with natural convection. Equipped with a food warming compartment. Ceramic: front top, food warming surface Metal: sides, riddling grate kw 7,4 84,6 % Ø cm 15 kg 170 cm 52 x 44,7 x 124,2 WHILE STOCKS LAST 94 95
WOOD > MODULO VERSIONS Black metal_303 70055 1.700,00 ALPHA Wood-burning stove with natural convection., riddling grate kw 7,4 84,6 % Ø cm 15 kg 140 cm 50 x 42,3 x 115,5 WHILE STOCKS LAST Myria 360003 2.450,00 Black metal_303 367012 340,00 Inox metal_310 367011 540,00 Salt and pepper ceramic_110 367081 570,00 Sand ceramic_109 367080 570,00 CITY Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. Absolute Black_201: front cladding CITY WOOD City wood cladding Upper hole cover For Modulo wood if used with wall-mounted smoke discharge. Absolute Black granite_201 616015 1.600,00 3.380,00 40140203 27,00 Bordeaux ceramic_105 367008 570,00 Soapstone_202 367010 500,00 kw 12 87,6 % Ø cm 15 kg 215 cm 90 x 51,5 x 150 MYRIA Wood-burning stove with natural convection. Equipped with a large food warming compartment. Ceramic/Serpentine stone/stainless steel/metal: sides, food warming compartment base, riddling grate, base Upper hole cover kit in 304 stainless steel. Heat disperser Heat disperser complete with 2 black painted pipes (1 x 50 cm + 1 x 25 cm - Ø 15) and nickel-plated spiral. Storage drawer kit Drawer head in 304 stainless steel and painted drawer. 40140141 49,00 40140142 160,00 40140140 120,00 kw 11 87,6 % Ø cm 15 kg 250 cm 59,4 x 59,4 x 115 WHILE STOCKS LAST 96 97
WOOD > MODULO WOOD > MODULO REFLEX WOOD VERTIGO WOOD Reflex stainless steel wood cladding Inox metal_310 616001 750,00 Vertigo stripes metal w. cladding Stripes metal_307 616030 950,00 2.530,00 2.730,00 Reflex rust colour wood cladding Copper metal_309 616025 750,00 2.530,00 Upper hole cover For Modulo wood if used with wall-mounted smoke discharge. 40140203 27,00 Upper hole cover For Modulo wood if used with wall-mounted smoke discharge. 40140203 27,00 REFLEX Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. Copper metal_309/stainless steel metal_310: front cladding VERTIGO Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. Stripes metal_307: front cladding kw 12 87,6 % Ø cm 15 kg 215 cm 90 x 51,5 x 150 kw 12 87,6 % Ø cm 15 kg 215 cm 90 x 51,5 x 150 SQUARE WOOD CUSTOMISABLE MODULO WOOD Square soapstone cladding (as in photo) Soapstone_202 616004 1.600,00 Customisable wood frame Black metal_303 616007 270,00 3.380,00 2.050,00 Upper hole cover For Modulo wood if used with wall-mounted smoke discharge. 40140203 27,00 Upper hole cover For Modulo wood if used with wall-mounted smoke discharge. 40140203 27,00 SQUARE Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. Soapstone_202: front cladding CUSTOMISABLE FRAME Fireplace-stove with steel structure for hot air production and heat convection/forced convection. Pellet- or wood-burning available. The front cladding is customisable. Black metal_303: structure kw 12 87,6 % Ø cm 15 kg 215 cm 90 x 51,5 x 150 kw 12 87,6 % Ø cm 15 kg 200 cm 90 x 51,5 x 150 98 99
WOOD > COMFORT AIR STOVES > ACCESSORIES WOOD > COMFORT AIR STOVES > ACCESSORIES VERSIONS AVAILABLE/CODE VERSIONS AVAILABLE/CODE COMFORT AIR DUCTING KIT Ø 60 mm Y UNION The kit allows you to duct the hot air to rooms adjacent to the room in which the stove is installed. It includes: radial fan, potentiometer, housing, probe, switch and 60 mm union. Pipes and hot air outlets not included (the kit 4011044 or any of the accessories shown hereafter can be used). 4012026 215,00 Union to divert the flow of hot air in 2 ducts. Kit contents: One (1) Y union Three (3) clamps 4009009 10,00 Ø 60 mm DUCTING KIT Ø 60 mm 90 CURVE Complete kit for ducting air up to 1.5 m. Kit contents: One (1) 90 union One (1) flex pipe L = 1.5 m Four (4) clamps One (1) Ø 60 fan/pipe union 4011044 75,00 Kit contents: One (1) 90 union Three (3) clamps 4009011 9,00 Choose the hot air outlets to complete the kit FLIP HOT AIR OUTLET FLEX PIPE Ø 60 L = 8 m Complete with two lamps and air humidifier. White 4012017 190,00 4009017 35,00 FLOAT HOT AIR OUTLET FLEX PIPE Ø 60 L = 1.5 m Complete with two lamps and air humidifier. White Black/white (as in photo) 4012018 4012019 210,00 210,00 4009003 11,00 MULTI 12 HOT AIR OUTLET INSULATED FLEX PIPE Kit contents: One (1) 120x120 mm multi-directional hot air outlet One (1) frame One (1) Ø 60 flange One (1) Ø 60 plug Four (4) screws One (1) clamp 4009010 26,00 Ø 60 mm interior/ 110 mm exterior L= 3 m 4010004 42,00 Ø 60 mm STRAIGHT UNION Ducting connection union. Kit contents: One (1) Ø 60 straight union Two (2) clamps 4009008 4,00 100 101