Systems and units for humidification from the manufacturer with the greatest know-how Proven features for humidification in ventilating and air-conditioning systems
Condair CP2 Consultant: We depend on hygienic processes for humidification and only untreated water is available. The answer: Condair CP2. The Condair CP2 electrical steam humidifier was developed to satisfy these very requirements described. The equipment technology is based on the familiar electrode heating of preceding models in the Condair program. Experience gained from many years of electrical steam humidification has been incorporated in development to comply in an optimum way with market requirements. The units are designed for operation with tap water. No additional water treatment is necessary. Steam capacities up to a maximum of 360 kg/h are achieved by a careful choice of unit sizes. The range is extended in the lower performance levels with 2 and 4 kg/h. All units can of course accept a continuous control signal. The Condair CP2 steam humidifier fits perfectly in your application: Simple layout Tap water operation Absolutely hygienic with steam High operating reliability Easy maintenance Case optional available in stainless steel Consistent separation of power and water sections to ensure additional operating safety User-friendly control modules Steam cylinder as required: exchangeable or cleanable. Continuous control unit for all standard commercial control signals Easy access ensures cost saving during installation and maintenance Insulated base-plate with integral connections for power and water
Condair CP2 Service Technician: Condair CP2 units are distinguished by their simple installation and consistent separation of electrical and water sections. The robust and reliable components are fitted in separat power and water sections. Easy access to the steam cylinder and the hinged electronics/control moduls permits rapid, cost-saving installation and simple unit maintenance. The M4 and M3 electronic control modules ensures a reliable and stable humidification system. The user-friendly LCD display with membrane keyboard allows simple programming of the control parameters. All relevant operating data are displayed. Summary of technical data Heating voltage 400V/3~/50...60Hz 1 ) Model Condair CP2 F5/F8 F15 F20/F33/F45 F60/F80/F90 F135 Steam output in kg/h 2 ) 5/8 15 20/33/45 60/80/90 135 Rated capacity in kw 3.8/6 11.2 15/24.7/33.8 45/60/67.5 101.3 Heating voltage 230V/1N~/50...60Hz Model Condair CP2 N2/N4 H2/H4 H5/H8 Steam output in kg/h 2 ) 2/4 2/4 5/8 Rated capacity in kw 0.75...3 0.75...3 3.8/6 Control voltage 230V/50-60Hz/1~ 230V/50-60Hz/1~ 230V/50-60Hz/1~ Fitting/dimensions Steam cylinder type A240 x x A3.../D3... x A4.../D4... x A6.../D6... x x x Remote indication relay REL 3 ) 3 ) 1 1 1 1 1 Control modules M/M4 1 1 1 1 1 1 1 Net weight in kg 6 6 14 15 20 40 60 Operating weight in kg 11 11 30 35 60 120 180 1 ) Other heating voltages on request 2 ) Higher steam outputs on request 3 ) 1 relaiscontact included Operating conditions Permissible water pressure 1...10 bar Water quality Mains water (125...1250 µs/cm) Ambient temperature max. 1...40 C Ambient humidity max. 75 % r.h. Permissible air duct pressure -0,8...1,5 kpa (-80...150 mm WS), optional up to 3 kpa Type of protection IP20 Other data Conformity CE, VDE/GS Condair internationally protected/international patent Technical data subject to modifications
Defensor Mk5 Consultant: Our water contains a high proportion of lime and we also depend on high quality control. The answer: Defensor Mk5. The Defensor Mk5 electrosteam humidifier with resistance heating element principle sets new standards: High operating reliability Rapid maintenance thanks to the patented scale management High control accuracy Steam cylinder of indestructible CrNi steel. Case optional available in stainless steel Resistance heating elements permit the use of untreated, treated or fully demineralized water The drain pump is placed above the lime scale collector container. Advantage: minerals are retained in the collector container Lime scale management: cold water zone prevents scale deposits Power semiconductors ensure high control accuracy Consistent separation of power and water sections ensures operating safety Scale collector container for amazingly simple maintenance Transport and protection strap
Defensor Mk5 Service Technician: Interruptions in operation must be short these days. Maintenance of the Mk5 units is rapid and simple, also thanks to the ingenious scale management system. High operating reliability A scale collector container is fitted below the stainless steel steam cylinder. The scale management system specific to the unit ensures that minerals precipitated during operation are continuously removed from the steam cylinder, fall into the scale collector container and are collected there. This prevents disturbances in operation by deposit of minerals in the unit. Simple maintenance Maintenance is limited to drainage of the scale collector container, which can be performed very quickly 1 to 3 times per year depending on the water quality. Summary of technical data Humidity control: Mk5 Visual On/Off Continuous Mk5 Process Continuous small large twin unit 5 8 10 16 20 24 30 40 50 60 80 max. steam capacity in kg/h Heating voltage 5.0 8.0 10.0 16.0 20.0 24.0 30.0 40.0 50.0 60.0 80.0 400V/3~/50...60Hz 4.6 7.3 9.0 14.6 18.0 21.9 27.0 36.2 45.0 54.0 72.4 220V/3~/50...60Hz 5.0 8.5 10.5 16.5 20.5 25.0 30.5 41.5 51.5 61.5 83.5 415V/3~/50...60Hz 5.0 10.5 240V/1N~/50...60Hz 5.0 10.0 230V/1N~/50...60Hz 4.0 6.0 7.0 11.5 14.5 17.5 21.5 29.0 35.5 43.0 57.5 200V/3~/50...60Hz Dimensions (w/h/d) in mm small: 500x1078x437 large: 594x1087x392 twin unit: 2x large Technical data subject to modifications
Condair GS Consultant: Steam generation employing the most efficient and environmentally-friendly method The solution: Condair GS,maximum benefit from ecological energy Regardless of which energy is used to generate steam, the quantity required remains the same. It is therefore necessary to utilise the most efficient energy if cost-effective humidification is to be achieved. Gas not only offers a unique cost-benefit ratio, but is also the best energy source from an environmental point of view. Worldwide use of natural and ecological gas is growing at a rapid rate. The efficiency of the latest generation of gas-fired steam generators from Condair has once more been considerably increased in this respect. Innovative The newly-developed 360 full circle technology employed in the combustion system ensures low emissions and enables continuous performance control from as low as 10 kg/h steam output. The thoroughly new design of the chambered heat exchanger achieves a thermal efficiency of over 90%. Safe An automatic operation control with integrated ionisation monitoring and a fault detection system with safety shutdown ensure that operation of the Condair GS is completely safe. Operational reliability is guaranteed, thanks to an intelligent water management system consisting of an external float unit, filling valve, drain pump and a drain waste water cooler. Continuously adjustable The GS can be supplied in versions with six different output capacities. In the case of the GS-240, to give an example, continuous control of steam output is possible from 10 kg/h up to a maximum output of 240 kg/h. The unit control system is controlled by microprocessor and can be actuated with all common control signals. User-friendly The GS has a user-friendly, integrated help function. The control can be linked to a building services master control system via an open transmission protocol (e.g. LON). Up to 10 humidifiers can be linked to form an integrated system. Maintenance-friendly A generously-proportioned front aperture enables comfortable servicing and cleaning of the heat exchanger.
Condair GS Servicetechniker: Unterhalt und Wartung der Befeuchter GS mit Gasbetrieb sind auch bei hohen Dampfleistungen unkompliziert und problemlos. Effective Gas is one of the cheapest sources of energy and enables average amortisation of a gas humidifying unit within less than 2 years. This means a considerably increased ROI when compared with conventional steam generation methods. Your sales partner will be more than willing to calculate the specific amortisation duration and the savings involved. Variability Numerous suitable steam distribution tubes are available for steam distribution which can be integrated in a monoblock system or a duct. Costs - Electrically-driven And these are your advantages: Maximum cost-effectiveness during operation Short amortisation duration Rapid, simple humidifier assembly and installation, thanks to an integrated frame 360 full circle burner technology for minimum emissions and maximum-accuracy continuous control Steam distribution systems for all common applications, special systems realised on request Robust stainless steel water tank and heat exchanger Integrated water management system for increased operational safety Suitable for both untreated and treated water - Gas-fired Operating time Condair GS has been tested to confirm all European standards and has been certified by Advantica (BritishGas) The most important technical data for the humidifier: Condair GS Type Humidifying output kg/h Mains power connection Maximal thermal output kw All conventional control signals Control accuracy Gas types Air duct pressure Pa Height cm Width cm Depth cm 40 10...40 80 10...80 36.5 73.0 50.8 67.3 120 160 200 240 10...120 10...160 10...200 10...240 230V, 50...60Hz 109.5 146.0 182.5 219.0 0...5VDC/1...5VDC/0...10VDC/0...20mA/4...20mA +/- 5% r.f. G20, G25-800... +1700 all Types 81.5 all Types 118 103.5 103.5 146.4 146.4 Technical data subject to modification
OptiSorp Consultant: Precarious spatial conditions make the planning of humidification more difficult. The OptiSorp system with its extremely short humidification distance is the answer for us. The OptiSorp multiple steam distribution system was developed for connection to all steam humidifiers from Axair, including Defensor Mk5, Condair CP2 and Condair GH. This fully satisfies the requirements of VDI 6022 and ensures uniform steam distribution over the entire duct cross-section. The steam is taken by the patented steam nozzles directly from the core flow of the individual steam distribution pipes and blown free from condensate into the air flow. The exactly defined pressure drop in the individual steam nozzles ensures a uniform steam output from all nozzles. This permits extremely short humidification distances even with higher humidification capacities. Steam distribution system and steam nozzles are made entirely of stainless steel and are supplied pre-assembled up to 1200 x 1200 mm for easy installation. The fitting and commissioning of the OptiSorp system is simple and fully documented by the manufacturer. OptiSorp No. of steam Steam output Duct dimensions (in mm) system connections (in kg/h) width height 1 1 45 450...2700 450...1650 2 2 90 450...2700 450...2200 3 3 135 450...2700 800...3200 4 4 180 450...2700 800...3200 Length of humidification distance (B N in m) Inlet humidity (rh) Outlet humidity (rh) 40 50 60 70 80 90 5 0.22 0.28 0.36 0.48 0.66 1.08 10 0.20 0.26 0.34 0.45 0.64 1.04 20 0.16 0.22 0.30 0.41 0.58 0.96 30 0.10 0.17 0.25 0.36 0.52 0.88 40 0.11 0.20 0.30 0.45 0.79 50 0.13 0.24 0.38 0.69 60 0.16 0.30 0.58 70 0.20 0.45
Condair OEM Design Engineer: It must be easily possible to adapt and install humidification systems for our climatic cabinets. The answer: Condair OEM. Condair OEM The modular construction system for adaptable, perfect humidification. OEM is a world-famous name when it is a matter of fitting components from a manufacturer in its own units and marketing them under this name. This is also true of the Condair OEM. This series is primarily used in air-conditioned cabinets for computers, cold storage chests or other cabinets. A compact construction was ensured to allow the units to comply with the usually confined installation requirements. The electronic control unit and evaporator form the heart of the system. All components are available in various versions. Only this modular construction makes it possible to comply with individual customer requirements. Summary of technical data Steam capacity in kg/h 1-2 4 8 13-15 20-45 Nominal output in kw 0.75-1.5 3 6 9.7-11.2 15-33.8 Heating voltage 230V/1N~/50...60Hz 230V/3~/50...60Hz (max.33kg/h) 400V/3~/50...60Hz Steam cylinder A140 A2../2..R A3../D3.. A4../D4.. A6../D6.. Control voltage 230V/50...60Hz/1~ 24V/50...60Hz/1~ Humidity control On/Off (max.13kg/h) continuous Dimensionen (wxhxd) in mm 201x330x208 201x410x208 201x496x208 263x533x253 333x623x333 Operation conditions Permitted water pressure 1...10 bar Water quality Mains water (125...1250 µs/cm) Permitted ambient temperature 1...40 C Permitted ambient humidity 75 % r.h. (not condensing) Conformity CE, according to VDE standards Technical data subject to modifications
Condair Esco Consultant: For humidification we have a permanently installed pressurized steam network available. The answer: Condair Esco. The Condair Esco steam humidification system eliminates the weak points in the steam humidification sector with a live steam supply and sets entirely new standards. The heart of the system is the complete steam connection unit with a new rotary disk valve, combined with the proven steam distribution system and patented steam nozzles. This provides an optimum system to comply with all humidification requirements of the specific installation. Design security! The humidification distances are calculated and guaranteed for the relevant operating conditions. Condair Esco in stainless steel The hygiene requirements of technical room air systems and therefore also of humidifiers are continually increasing in the market. VDI guideline 6022 defines air as a food. Steam for humidification must be of the highest purity, particularly for applications in the chemicals, pharmaceuticals and foodstuff industry, in hospitals and in the high technology sector. For this purpose humidifiers are also available made entirely from high-grade steel of material quality AISI 304. The ceramic rotary disk valve with linear characteristic is 100% steam-tight when closed.
Condair Esco Contractor: Simple installation, low fitting costs and no loss of steam - the Condair Esco satisfies these requirements. The Condair Esco steam humidification system is available in two series. They are both equally suitable for technical processes and room air systems and also for fitting in machines and equipment. The Condair Esco DL 40 series is a steam humidification system with a steam connection unit and horizontal steam distribution pipes for fitting in systems with narrow air ducts or long humidification sections. The choice is largely determined by the geometry of the humidification duct. The layout of the steam distribution pipes is individually adapted to suit design requirements. The Condair Esco DR 73 series is a complete humidification system with a steam connection unit, main distribution pipe and nozzle stems for fitting in systems with wide air ducts or short humidification sections. The steam distribution pipe is provided with patented steam nozzles for the specific system. This guarantees an equal, condensatfree steam output. Summary of technical data Rotary Steam pressure Steam capacity Rotary drive Steam distribution pipes Max. duct width steam valve bar max. kg/h Typ CA: electrical Type mm Typ P: pneumatic Esco 5 0.2-4.0 125 CA 75, CA 150(S), P 10 DL 40-10/023-10/178 2 000 Esco 10 0.2-4.0 250 CA 75, CA 150(S), P 10 DL 40 4 000 CA 150(S), P 10 DR 73 10 000 Esco 20 0.2-4.0 500 CA 150(S), P 10 DL 40 4 000 DR 73 10 000 Esco 30 0.2-4.0 1000 CA 150(S), 2 x P 10 DR 73 10 000 Technical data subject to modifications
Condair Dual Customer: We want to minimize our operating and maintenance costs while ensuring absolutely hygienic humidifier operation. This is the important thing! Our choice: Condair Dual. The Condair Dual adiabatic humidifier with its entirely new combination of the two humidifier technologies of atomizing and evaporation eliminates all previous disadvantages of adiabatic systems. Uniform atomizing and low energy consumption! In the Condair Dual the water is supplied by molecular atomizer nozzles specially adapted to individual system requirements. These generates a spray mist of finest water aerosols with a pump pressure of only 4 to 8 bar. Absolutely aerosol-free air outlet guaranteed! The following ceramic secondary evaporation elements increase the humidification efficiency and minimize the waste water volume. In addition, they prevent aerosols reaching the air flow and therefore ensure an absolutely hygienic humidifier operation. Uniform atomizing and low energy consumption! Absolutely aerosol-free air outlet guaranteed!
Condair Dual Service Technician: The absolutely hygienic operation of the Condair Dual saves us substantial servicing and maintenance costs. The use of fully demineralized spray water, a sterilizing unit and preceding fine filters reduce maintenance costs and prevent deposit of minerals with resulting damages to the following components. The perfect hygiene was checked and verified in a long-term test by the Fresenius Institute. The outstanding results are confirmed by the Fresenius Hygiene Certificate for humidification systems. Control unit with connection to the water treatment system Summary of technical data Humidification capacity Control unit connection Voltage for spray valves Control signals active Control signals passive Control accuracy Air speed in duct Construction length of case Nozzle pressure Requirement of water quality Water connection pressure 20 to 1000 l/h 200...240 VAC / 50...60 Hz 24 VDC safety voltage 0...20, 0...10, 0...8.25, 1...5, 0...5, 0...1 VDC 0...20, 4...20 ma all potentiometric humidity sensors from 140 ohms to 10 kohms +/- 4 % r.h. 4 m/s maximum 1.2 m 4...10 bar fully demineralized water without admixtures with conductivity < 15 microsiemens/cm, maximum 1000 germs/ml in feed water flow pressure 2...10 bar Technical data subject to modifications
Condair Fast Fog Consultant: Humidifying and cooling with high-pressure. The short installation dimensions are perfectly useful for retrofit projects. The answer: Condair Fast Fog. The new Condair Fast Fog humidifier is ideally suitable for high-efficient humidifying at low energyconsumption. It is especially designed for adiabatc-cooling of the exhaustair thanks to its high-pressure atomizing principle and resulting high humidification-efficiency of 95%. The humidifier is installed in an Airhandling-unit or an air duct. Special AxAir high-pressure nozzles generate a fine water mist. The unique watermist expansion elements patented by AxAir ensure that the water spray is uniformly introduced over a short humidifying sector in the unit cross section. The Condair Fast Fog is designed in every respect to stateof-the-art technological standards. Legend: 1 High-pressure pump station with PLC control 2 Supply to nozzle circuits Dry air Uniform spray-mist distribution over the duct-diametre Moist, aerosolfree supply-air 3 Modular nozzle system 4 Atomiser nozzles with steam expanders 5 Eliminator unit High-pressure pump station with integrated PLC control Nozzle system with patented expansion elements
Condair Fast Fog Service Technician: The high-pressure humidifying system is convincing due to the modular construction and the easy installation. The mist eliminator system with the special antibacterial coating Assembly and installation in modular system Essential technical data: Length of humidifying section max. 1.5 m Effective humidifying distance 0.8 1.3 m Humidifier output 20 450 l/h Pump power connection 3 x 400 V, 50/60 Hz Pump working pressure approx. 80 bar Pump power input 1.5 kw Flowing pressure of supply water prior to pump min. 1,0 bar max. 5,0 bar Temperature of supply water prior to pump maximum 35 C Control signal connection 0 10 VDC, 0 20 ma, (4 20mA) Control accuracy +/- 5% relative humidity Pressure loss throughout housing cross-section approx. 75 Pa at air velocity 2.3 m/s Supply water admittance (from osmosis) 3 15 micro-siemens/cm Required air filter class prior to humidifier min. EU (F) 6 Permissible air speed 0.5 4.0 m/s. Technical data subject to modification
Reg.No. 40002-2 Manufacturer: Axair Ltd. Systems for Air Treatment A WMH Company CH-8808 Pfäffikon (Switzerland), Talstr. 35-37, P.O. Box Tel. +41 55 416 61 11, Fax +41 55 416 62 62 Internet http://www.axair.ch, e-mail info@axair.ch The importance of optimum humidity in climatic technology is undisputed. The economic application of primary energies, as well as the efficient use of natural resources, are becoming increasingly important. As world-wide leading company for humidification techniques we consider it a challenge and our function to satisfy the ever changing market demands with new humidification technologies. We endeavour systematically to incorporate the latest developments in the fields of technology, quality and hygiene in our products for the benefit of our customers. Today and in the future. Products of the Condair and Defensor series have been in service throughout the world for decades. The manufacturer Axair vouches for market-oriented innovation and progress. And a world-wide marketing network ensures advice, sales and service in your area. 1116507 E 0112.3 (0307.2,5) http://www.ateweko.ch