EXPRESS BOOM ASSEMBLY POCKETBOOK 06 HYPRO ACCESSORIES W W W.H Y PROSPR AY TIP S.COM
Why Express Boom Assembly? UPDATE OLD STYLE POLY BOOM TO ENHANCED STAINLESS BOOM Eliminate warping with a stainless steel pipe: Many of today s sprayers are equipped with Black Poly Pipe on the spray booms. Exposure to long periods of summer sun and chemicals can cause damage. Over time, soft poly pipes will sag and allow pooling inside of the boom pipe. Low spots in the boom pipe can inhibit efficient flow through the boom pipe and make a boom harder to flush. The Express Boom Assembly features a Schedule Stainless Steel pipe that eliminates the ability to warp. New nozzle bodies and express fittings: The refreshed boom plumbing includes all new nozzle bodies and Express Fittings. The Express fittings and the optimized design allow for improved sprayer performance. Improve shutoff times with Express End Caps and eliminate chemical contamination: Upgrading to Stainless Steel Express Booms will dramatically improve nozzle shut-off times by eliminating trapped air. With the Express End Caps on each end of the boom, the shut off delay can be reduced up to 0- seconds. EASY-TO-USE CONFIGURATOR Express Boom Configurator is an Easy-to-Use Tool that will step you through the process of selecting the right layout for each boom pipe section on your sprayer. (Technical Assistance is available a -800--860) CONVERTING FROM A DRY BOOM SPRAYER Many of the older Trailer Sprayers in the field have the DRY BOOM set-ups. Upgrading to the Express Booms converts the sprayer to a WET BOOM set-up. This will improve sprayer performance as it includes Express End Caps for air elimination and boom pipe flush. LOW COST OPTION TO UPDATE YOUR SPRAYER The Express Boom Assembly simplifies the manufacturing process and supply chain by reducing labor, assembly time and product numbers.it eliminates the need to stock component parts such as pipes, fittings, or nozzle bodies, by providing package options that make it convenient for standard shipping methods. (i.e FedEx, UPS, etc.) The Pre-Assembled Boom Pipe sections are Factory Pressure Tested. They can be mounted on boom sections with confidence and go to the field ready to spray. Page
Old Style Poly Boom vs. Express Boom Express Boom 6 Poly Boom (Old Style) POLY BOOM - OLD STYLE Warping of the boom causes inefficient and ineffective spray applications. Chemistry, sunlight, and hot summer temperatures will cause the black poly pipe to swell, sag and distort. The spray nozzles attached to the pipe are distorted or Torqued out of specification. Air can also be trapped in the low spots. (Similar to a plumbers P-Trap). This can cause slow shut-off times and delayed start up times when spraying. (Item ) Leak points from threaded fittings. Warped poly pipes can increase the chance of leaks at threaded connections. The Express Booms are equipped with the NEW Flanged Fittings that provide leak-proof connections. (Item ) Torqued nozzle bodies give off-target applications. As the poly pipe distorts and twists, the torqued nozzle bodies can shift and direct away from the specific target. The result of this is improper spray coverage and overlap. (Item ) EXPRESS BOOM - INNOVATIVE SOLUTION The Express Boom features Express End Caps to provide adequate boom hygiene and allow for easy boom cleanout. (Item ) (See also page ) Durable grade with Schedule Lightweight Stainless Steel pipe complete with Express Fittings, UF Clamp, and Gaskets. These upgrades provide a higher pressure rating, do not allow chemical absorption and will not sag over time. (Item 6) -way ProFlo nozzle bodies with polymer EPDM 8PSI Diaphragm Check Valve. Express Booms are ready for the NEW ProStop-E Individual Nozzle Shut-Offs. Consult Hypro Technical Services at 800--860 for more information. or 0 spacing configurations are available for your specific spraying needs. Many new spray techniques are being adopted and changes to the boom spacing is key to these new spray techniques. Dead End spaces allow chemical residue to build up at the ends of the boom pipe. Poly pipes absorb spray chemistry that make it difficult to completely clean out, which increases the chance of cross contamination when changing chemicals. (Item ) Page
Express End Cap - Improved Shut-off Time ISSUE WITH CONVENTIONAL BOOMS Trapped air in the boom will cause shut off lag. Every time you empty the spray tank, change products or flush the system, then refill the sprayer, air gets trapped in the boom lines. This trapped air causes a delayed response in nozzle shut off (up to seconds in some cases). Shut-off lag can cause overspray on unintended areas such as: grassy waterways, overlaps, end rows and boundary areas. The operator must allow for shut off lag time when turning on field ends or crossing grass waterways. SOLUTION - EXPRESS END CAP Passive feature eliminates the trapped air by allowing the air to escape through the nozzle body. Trapped air rises to the top of the boom pipes. Express End Cap vents the air out through the nozzle body when the boom is pressurized. Page
Express End Cap - Boom Hygiene and Removal of Dead Ends In traditional booms, there is a section of pipe at the end of the boom, Dead End Zones (Fig.), that allow chemical contaminate to build up (Fig. ). Express Booms with Express End Caps removes these Dead End Zones by putting the last nozzle body at the end of the pipe. A removable plug (Fig. ) is also placed at the end to allow better flow and flushing through the nozzle bodies, and eliminates the risk of chemical build up in the boom pipe. In result of this, when you go from one type of herbicide to another, there will be a lower risk of field streaking due to chemical contamination (Fig. ). CHEMICAL CONTAMINANT IN DEAD END BOOM PIPE CHEMICAL CONTAMINATION REMOVE PLUG FIELD STREAKING Page
Easy-to-Use Express Boom Configurator Opportunity With Express Booms, you can specify nozzle spacing to take advantage of new spray techniques. Over the years, 0 spacing has been very common on sprayers. Changing to spacing enables more spray pattern overlap which increases coverage. It also enables spraying over and between 0 rows when using drops. Solution: Whether its or 0 spacing, the express boom assembly can meet the needs of the grower. You can create varied configurations with the Hypro Express Boom Configurator. Spray Booms are laid out by the manufacturers to optimize folding and storage. The Boom Configuration Tool allows you to re-create the exact layout of your old boom to the NEW Express Boom System. Choose Left Branch Tee Choose Right Branch 6* 6* There are many boom plumbing configurations because of boom structure length fold and breakaway points, etc. Below is an example of a X configuration. This configuration has nozzle bodies to the left of the inlet tee and to the right. EXPRESS BOOM CONFIGURATOR TOOL The Express Boom Configurator helps you find the correct part numbers for ordering. To use the configurator tool, you will simply enter the plumbing configuration and it will select boom pipe part numbers for you to order. The tool will also designate boom pipe position on your spray boom. www.hypropumps.com/express Page 6
Frequently Asked Questions What is the pricing for the Express Boom Assembly? - Please see the price sheet for pricing of standard boom configuration. Tailored configurations will be priced separately. How does this product provide value? - It reduces labor and simplifies the manufacturing process. It allows OEM s to focus on machine assembly, and minimizes the assembly for the customer. What are the standard replacement parts for the boom assembly? - Express End Cap, Express Tee, ProFlo Nozzle Body Series. Do the boom assembly sections fit into existing boom structures on the sprayer? The boom assembly concept was designed to be a modular product. Boom sections can -vary in length and configuration to meet any existing boom structure. It is common that replacement of aged boom plumbing will be required and the ability to purchase tested and pre-fabricated boom sections will eliminate many concerns. Standard products will be available for tailored configurations and off-the-shelf applications. Spec products will be tailored to meet a specific boom design; part numbers and prints will be generated for these configurations and provided to the customer. Common Terms On-Center: Boom space alignment starting with the nozzle body at the center of the sprayer. Generally with Spacing. Off-Center: Boom space alignment starting with nozzle bodies that are equally offset from the center of the sprayer. Generally with 0 Spacing. Over the Row: Current practice is to plant 0 rows, therefore spacing aligns spray patterns on and in between each row. This is why growers use Express Boom to change from 0 to spacing. Between the Row: Spraying between crop rows. Also refers to nozzle position on the boom to spray between rows. Schedule tubing: Thin walled tubing or boom pipe. Lighter weight and allows slightly more flow. (The New Standard in Wet Boom Sprayer Applications) Used with Hypro Express Boom Assembly. Boom Hygiene: This is Hypro s slogan (not trademarked) used to promote cleanout, and mitigate crop injury. Images of clogged booms, and field stripping are well paired with Boom Hygiene. Page 7
Additional Resources WEBSITE VIDEOS-YOUTUBE CONFIGURATOR TOOLS Tee Choose Left Branch Choose Right Branch 6* 6* OIPM PRESS RELEASE BROCHURE FOR IMMEDIATE RELEASE PENTAIR LAUNCHES HYPRO EXPRESS BOOM ASSEMBLY BOOM-IN-A-BOX DESIGNED TO SAVE TIME, MONEY NEW BRIGHTON, MIN. February, 0 Pentair Ltd. (NYSE: PNR) announced today the launch of the Hypro Express Boom, a pre-assembled wet boom designed to eliminate complexity and minimize labor costs. Hypro s Express Boom Assembly saves hours of expensive labor for Distributors and OEMs by delivering a fully-assembled, performance-tested boom. The Hypro Express Boom Assembly consists of many components needed for a wet boom, and is pre-assembled in many standard configurations. The standard assembly is complete with stainless steel piping, -way ProFlo nozzle bodies and Express end-caps and fittings. Custom options are also available. BOOM-IN-A-BOX SAVES TIME, MONEY According to Gene Schellhorn, Pentair Product Manager, The Express Boom Assembly is as turn-key as it gets for wet booms. We ship a plumbed, performance-tested assembly that can be mounted in about an hour. It s essentially a boom-in-a-box, specified for a customer s precise needs. Schellhorn says the benefits to OEMs and Distributors are obvious, No drilling, no cutting, no threading. No custom tools or fixtures needed. No need to stock component parts such as pipes, fittings, or nozzle bodies. The Express Boom Assembly is a significant time and labor saver saving our customers valuable time and money. The Hypro Express Boom Assembly utilizes the award-winning Hypro Express Nozzle Body End Cap, which eliminates trapped air from the boom by allowing air to escape through the nozzle body. This reduces nozzle turn-off time by 8%, eliminates dead-ends from each pipe, and eliminates potential chemical contamination. The Express Boom also utilizes O-ring sealed joints for all wet boom fittings, eliminating the need for leakprone threaded joints and welded fittings. This also allows for lighter schedule stainless steel pipe in place of heavy schedule 0 pipe. In addition to the standard configurations offered, the Hypro Express Boom can be ordered from the factory with custom tips, piping, gaskets, nozzle bodies and spacing. More information on the Hypro Express Boom Assembly, including where to buy, can be found at www.hypropumps.com. About Pentair Ltd. Pentair (www.pentair.com) delivers industry-leading products, services and solutions for its customers diverse needs in water and other fluids, thermal management and equipment protection. With pro forma revenues of approximately $8 billion, Pentair employs more than 0,000 people worldwide. ### Pentair Media Contact: Tegan Moehn, Marketing Specialist Tel.: 6-766-677 E-mail: tegan.moehn@pentair.com SOURCE Pentair Ltd. 0 Pentair Ltd. All Rights Reserved. HSPR (0/0/) Printed in USA For more information visit: www.hyprospraytips.com/express www.youtube.com/hyprospraygroup 7 TH AVE NW, NEW BRIGHTON, MN WWW.HYPROSPRAYTIPS.COM PH: 800--9776 ORDERS FAX: 800--696 Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair Ltd. All Rights Reserved. FORM 06 (/) Printed in USA