Wet/dry vacuum. - This single-motor wet/dry vacuum is equipped with a fully automatic filter cleaning system. - The product also has an equipment socket with automatic switch on/off. - Vacuum up even volumes of fine dust with a constant suction. - The speed can be steplessly adjusted. - Anti-static system. - Can also be used as a wet vacuum. - The vacuum automatically switches off when the maximum filling capacity is reached. - The vacuum comes equipped with accessories (integrated vacuum hose and accessory holder), making it ready to use. - Dimensions (LxWxH in mm): 520x380x580. - Voltage: 220 240 V. - Container capacity: 35 l. - Air displacement: 61 l/s. - Weight: 12.5 kg. - Cable length: 7.5 m. - Container material: plastic. - Sound level: 67 db(a). - Vacuum hose 2.5 m. - Vacuum tube, metal 2 x 0.5 m - Wet/dry floor nozzle, 300 mm. - Filter bag, paper, crevice tool. - Coupling bush for electric tools. - Automatic switch-off when full capacity reached. - Automatic switch on/off for electric tools. - Eco-filter system, flat-fold filter. - Anti-static system. - Elbow, stop castor. - Tact filter clean. - Maintenance free vacuum turbine, 1 x. - Safety class I. Part number 81 53 2 333 962 National Company (NSC) or your Building and Equipment Consulting, BV-74 1
Scrubber. - This machine has an operating width of 400 mm and a tank volume of 10 l. - It also comes equipped with additional transport wheels and a brush pressure adjusting mechanism. - Flexible in use. - Low-noise scrubbing and vacuuming possible in both directions. - Fold-down push bar and removable tanks (with locked carrying handle). - Brushes and suction lips can be changed quickly and without tools. - Low ground clearance (easy cleaning under furniture thanks to fold-down push bar). - Dimensions (LxWxH in mm): 520x470x380. - Voltage: 220 240 V. - Clean/dirty water tank: 10 l/10 l. - Weight: approx. 30 kg. - Speed: 1100 rpm. - Working width when brushing and vacuuming: 400 mm each. - Maximum surface performance: 400 m²/h. - Input power: 2,710 W. - Brush pressure: 100 200 g/cm². - Roller brush. - 2-tank system. - Mains operation. - Variable pressure. - Transport wheels. - 2 vacuum bars, straight. Part number 81 55 2 333 965 National Company (NSC) or your Recommended accessories. Accessories are listed in and can be ordered from the catalogue. Building and Equipment Consulting, BV-74 2
Autogenic burner fittings. - This transportable welding rig is used for general welding and heating work and for tinning. - Handle piece with shaft and union nut. - 5 welding inserts (0.5 mm to 9.0 mm). - Wing cutting insert. - 3 block nozzles (3 mm to 100 mm). - Guide cart with circular guide. - Nozzle cleaning set. - Gas igniter. - Construction wrench. Part number 81 42 2 336 613 National Company (NSC) or your Accessories. Oxygen pressure reducer. Part number 81 42 2 336 614 National Company (NSC) or your Building and Equipment Consulting, BV-74 3
Acetylene pressure reducer. Part number 81 42 2 336 615 National Company (NSC) or your Oxygen & acetylene hose package. - Length: 10 m. Part number 81 42 2 336 618 National Company (NSC) or your Storage and canister cart. - Large wheels for safe and simple transport. - Excellent stability and manoeuvrability thanks to third standing steering wheel - Storage capacity for all components. Part number 81 42 2 336 619 National Company (NSC) or your Building and Equipment Consulting, BV-74 4
Welding safety wall. - This mobile welding curtain cart satisfies the requirements for separating workstations during welding and grinding work. - The radiation protection required by occupational safety legislation against welding arcs during steel and aluminium welding is also guaranteed. - Stable rectangular tubular frame (30 x 30 mm), powder-coated. - Low centre of gravity. - Large industrial steering wheels (diameter 100 mm) with parking brake. - Central joint, allowing the welding curtain to be swivelled and fixed in place on both sides by 90. - Fixed slats with an overlap of 70 mm. This ensures that a closed wall without gaps is always guaranteed. - Extra-long slats stretching almost down to the floor, gap between the floor and the slats approx. 90 mm. - Dimensions (L x W x H in mm: 4,050 x 750 x 3,100). - Weight: approx. 58.6 kg. - Chassis, powder-coated, not preassembled (dimensions L x W x H in mm: 2,000 x 750 x 3, 100). - 8 protective slats, made from polyethylene (dimensions L x W in mm: 3,000 x 570; thickness: 1 mm). - Installation material. Part number 81 42 2 208 809 National Company (NSC) or your Misprints, errors and colour changes reserved. Building and Equipment Consulting, BV-74 5