Animal and vegetable fats and oils - Sampling (ISO 5555:2001)

Similar documents
Paper and board - Determination of grammage (ISO 536:2012)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Plastic containers for intravenous injections (ISO 15747:2010)

Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version )

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Camping tents (ISO 5912:2011)

Founding - Magnetic particle testing

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

PETROLEUM AND NATURAL GAS

Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)

Water meters for cold potable water and hot water - Part 4: Non-metrological :2014)

PLASTICS - DETERMINATION OF THE MELT

Energy management systems - Requirements with guidance for use (ISO 50001:2011)

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)

ILNAS-EN ISO 2692:2006

Personal protective equipment - Safety footwear (ISO 20345:2011)

Irish Standard Recommendation S.R. CEN/TS 115-4:2015

Water quality - Determination of ph (ISO 10523:2008)

Fasteners - Hexagon head screws - Product

WATER QUALITY - CRITERIA FOR

PISTON-OPERATED VOLUMETRIC

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Office furniture - Office work chair - Part 2: Safety requirements

CLEANROOMS AND ASSOCIATED

STEELS MICROGRAPHIC DETERMINATION THE APPARENT GRAIN SIZE (ISO 643:2003) IRISH STANDARD I.S. EN ISO 643:2003. Price Code

Aerospace series - Quality systems - First article inspection requirements

ILNAS-EN ISO :2005

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV))

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

This document is a preview generated by EVS

General requirements for establishing anthropometric databases (ISO 15535:2012)

Temporary structure - Tents - Safety

Operation of electrical installations -- Part 1: General requirements

This document is a preview generated by EVS

This document is a preview generated by EVS

Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)

This document is a preview generated by EVS

Health Informatics - Harmonized data types for information interchange (ISO 21090:2011)

Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO :2012)

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations

Irish Standard I.S. EN :2011

Dentistry - Powered polymerization activators (ISO 10650:2015)

This document is a preview generated by EVS

Dentistry - Powered scaler (ISO 18397:2016)

Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004)

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

Foodstuffs - Determination of vitamin C by HPLC

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

Gas meters - Additional functionalities

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

Irish Standard I.S. EN ISO :2013

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)

Irish Standard I.S. EN ISO :2009&A1:2014. CEN 2014 No copying without NSAI permission except as permitted by copyright law.

ILNAS-EN ISO 10684:2004

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version )

Personal protective equipment - Test methods for footwear (ISO 20344:2011)

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013)

Plastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile

Irish Standard I.S. EN :2009

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

This document is a preview generated by EVS

Irish Standard I.S. EN ISO :2013

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

Stationary training equipment - Part 1: General safety requirements and test methods (ISO :2013)

This document is a preview generated by EVS

BIOLOGICAL EVALUATION OF MEDICAL

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

Bitumen and bituminous binders - Specifications for paving grade bitumens

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

ISO INTERNATIONAL STANDARD

Safety of toys - Part 2: Flammability

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code

Permanently installed outdoor fitness equipment - Safety requirements and test methods

Irish Standard I.S. EN ISO 13791:2012

CONFORMITY ASSESSMENT - SUPPLIER'S

Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kv - Part 1: General requirements

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test

Transcription:

Irish Standard I.S. EN ISO 5555:2001&A1:2014 Animal and vegetable fats and oils - Sampling (ISO 5555:2001) CEN 2014 No copying without NSAI permission except as permitted by copyright law.

I.S. EN ISO 5555:2001& A1:2014 Incorporating amendments/corrigenda/national Annexes issued since publication: EN ISO 5555:2001/A1:2014 The National Standards Authority of Ireland (NSAI) produces the following categories of formal documents: I.S. xxx: Irish Standard national specification based on the consensus of an expert panel and subject to public consultation. S.R. xxx: Standard Recommendation recommendation based on the consensus of an expert panel and subject to public consultation. SWiFT xxx: A rapidly developed recommendatory document based on the consensus of the participants of an NSAI workshop. This document replaces/revises/consolidates the NSAI adoption of the document(s) indicated on the CEN/CENELEC cover/foreword and the following National document(s): NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. This document is based on: EN ISO 5555:2001 This document was published under the authority of the NSAI and comes into effect on: 2014-08-06 Published: 2007-06-01 ICS number: 67.200.10 NOTE: If blank see CEN/CENELEC cover page NSAI 1 Swift Square, Northwood, Santry Dublin 9 T +353 1 807 3800 F +353 1 807 3838 E standards@nsai.ie W NSAI.ie Sales: T +353 1 857 6730 F +353 1 857 6729 W standards.ie Údarás um Chaighdeáin Náisiúnta na héireann

Correction Notice Reference: Title: EN ISO 5555:2001/A1:2014 Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks (ISO 5555:2001/Amd 1:2014) Work Item: 00307144 Brussels, 2014-08-27 please include the following minor editorial correction(s) in the document related to: the following language version(s) : English French German for the following procedure : PQ/UQ Enquiry 2nd Enquiry Parallel Enquiry 2 nd Parallel Enquiry Formal Vote 2 nd Formal Vote Parallel Formal Vote 2 nd Parallel Formal Vote UAP TC Approval 2 nd TC Approval Publication Parallel Publication It has been brought to our attention that this document, issued on 2014-07-16, requires modification. The reference of ISO standard ISO 5555:2001/Amd 1:2014 have been modified at the end of the titles. Forewords have been updated accordingly. Please find enclosed the updated English and French version. We apologise for any inconvenience this may cause. DEL/FO004 (April 2013) Avenue Marnix, 17 B-1000 Bruxelles Tel : +32 2 550 08 11 Fax : +32 2 550 08 19

This page is intentionally left BLANK.

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 5555:2001/A1 July 2014 ICS 67.200.10 English Version Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks (ISO 5555:2001/Amd 1:2014) Corps gras d'origines animale et végétale - Échantillonnage - Amendement 1: Citernes souples (ISO 5555:2001/Amd 1:2014) Tierische und pflanzliche Fette und Öle - Probenahme - Änderung 1: Probenahme aus Flexitanks (ISO 5555:2001/Amd 1:2014) This amendment A1 modifies the European Standard EN ISO 5555:2001; it was approved by CEN on 4 July 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 5555:2001/A1:2014 E

EN ISO 5555:2001/A1:2014 (E) I.S. EN ISO 5555:2001&A1:2014 Contents Page Foreword...3 2

EN ISO 5555:2001/A1:2014 (E) Foreword This document (EN ISO 5555:2001/A1:2014) has been prepared by Technical Committee ISO/TC 34 Food products in collaboration with Technical Committee CEN/TC 307 Oilseeds, vegetable and animal fats and oils and their by-products - Methods of sampling and analysis the secretariat of which is held by AFNOR. This Amendment to the European Standard EN ISO 5555:2001 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 5555:2001/Amd 1:2014 has been approved by CEN as EN ISO 5555:2001/A1:2014 without any modification. 3

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 5555 December 2001 ICS 67.200.10 Supersedes EN ISO 5555:1995 English version Animal and vegetable fats and oils - Sampling (ISO 5555:2001) Corps gras d'origines animale et végétale - Echantillonnage (ISO 5555:2001) Tierische und pflanzliche Fette und Öle - Probenahme (ISO 5555:2001) This European Standard was approved by CEN on 14 December 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 5555:2001 E

EN ISO 5555:2001 (E) CORRECTED 2002-01-30 Foreword This document (ISO 5555:2001) has been prepared by Technical Committee ISO/TC 34 "Agricultural food products" in collaboration with Technical Committee CEN/TC 307 "Oilseeds, vegetable and animal fats and oils and their by-products - Methods of sampling and analysis", the secretariat of which is held by AFNOR. This document supersedes EN ISO 5555:1995. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at the latest by June 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 5555:2001 has been approved by CEN as a European Standard without any modifications. 2

INTERNATIONAL STANDARD ISO 5555 Third edition 2001-12-15 Animal and vegetable fats and oils Sampling Corps gras d'origines animale et végétale Échantillonnage Reference number ISO 5555:2001(E) ISO 2001

ISO 5555:2001(E) I.S. EN ISO 5555:2001&A1:2014 PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2001 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.ch Web www.iso.ch Printed in Switzerland ii ISO 2001 All rights reserved

ISO 5555:2001(E) Contents Page 1 Scope... 1 2 Terms and definitions... 1 3 General principles... 1 4 Requirements for apparatus... 2 4.1 General... 2 4.2 Materials... 2 4.3 Examples of types of sampling instruments... 2 4.4 Ancillary apparatus... 3 4.5 Sample containers... 3 5 Sampling technique... 3 6 Methods of sampling... 4 6.1 General... 4 6.2 Sampling from vertical cylindrical land tanks... 4 6.3 Sampling from ships' tanks... 6 6.4 Sampling from tank wagons or cars and horizontal cylindrical tanks including tank containers... 6 6.5 Sampling from weigh tanks... 7 6.6 Sampling from pipelines during transfer... 8 6.7 Sampling from tanks for the determination of conventional mass per volume ( litre weight in air )... 9 6.8 Sampling from packages (small packing units) including consumer packs... 9 6.9 Preparation of laboratory samples... 12 7 Packing and labelling of laboratory samples... 12 7.1 Packing... 12 7.2 Information concerning laboratory samples... 12 8 Dispatch of laboratory samples... 13 9 Sampling report... 13 Annexes A Temperature limits... 14 B Examples of sampling instruments and ancillary apparatus... 16 Bibliography... 25 ISO 2001 All rights reserved iii

ISO 5555:2001(E) I.S. EN ISO 5555:2001&A1:2014 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 5555 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 11, Animal and vegetable fats and oils. This third edition cancels and replaces the second edition (ISO 5555:1991), which has been technically revised. Annexes A and B of this International Standard are for information only. iv ISO 2001 All rights reserved

INTERNATIONAL STANDARD ISO 5555:2001(E) Animal and vegetable fats and oils Sampling 1 Scope This International Standard describes methods of sampling crude or processed animal and vegetable fats and oils (referred to as fats hereafter), whatever the origin and whether liquid or solid. It also describes the apparatus used for this process. NOTE Methods of sampling milk and milk products, including milk fats, are specified in ISO 707. 2 Terms and definitions For the purposes of this International Standard, the following terms and definitions apply. 2.1 consignment quantity of fat delivered at one time and covered by a particular contract or shipping document NOTE It may be composed of one or more lots or parts of lots. 2.2 lot identified quantity of fat, presumed to have uniform characteristics 2.3 increment quantity of fat taken at one time from one place in a lot 2.4 bulk sample quantity of fat obtained by combining the various increments from a lot in amounts proportional to the quantities they represent NOTE The bulk sample should be representative of the lot and should take account of any contractual requirements. 2.5 laboratory sample quantity of fat, obtained from the bulk sample after suitable homogenization and reduction in size, which is representative of the lot and intended for laboratory examination 2.6 conventional mass per volume sample litre weight in air sample quantity of fat taken for the mass of fat to be calculated from the volume 3 General principles The object of sampling and of preparing samples is to obtain from a consignment (which may be in lots) a manageable quantity of the fat, the properties of which correspond as closely as possible to the properties of the consignment sampled. ISO 2001 All rights reserved 1

This is a free preview. Purchase the entire publication at the link below: Looking for additional Standards? Visit SAI Global Infostore Subscribe to our Free Newsletters Do you need to Manage Standards Collections Online? Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation Do you want to know when a Standard has changed? Create safe work processes for the workplace with our Safe Work Method Statements Learn about other SAI Global Services: LOGICOM Military Parts and Supplier Database Metals Infobase Database of Metal Grades, Standards and Manufacturers Materials Infobase Database of Materials, Standards and Suppliers Database of European Law, CELEX and Court Decisions Need to speak with a Customer Service Representative - Contact Us