VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 1. 2010 do 31. 1. 2010 dop dátum vydania: dátum, dokedy musí byť EN prebraná na národnej úrovni vydaním identickej národnej normy alebo oznámením dow dátum zrušenia: dátum, dokedy musia byť zrušene národne normy, ktoré sú v rozpore s EN Zoznam technických komisii CEN sa nachádza na webovej stránke. Označenie dokumentu Názov v angličtine Dop Dow Technická komisia EN 15743 Supersulfated cement - Composition, specifications and conformity 31.7.2010 31.7.2010 CEN/TC 51 criteria EN 196-6 Methods of testing cement - Part 6: Determination of fineness 31.7.2010 31.7.2010 CEN/TC 51 CEN/TR 15985 Thermal insulating products - Factory made products of expanded CEN/TC 88 polystyrene (EPS) - Voluntary certification of the raw material CEN/TS 12390-11 Testing hardened concrete - Part 11: Determination of the chloride CEN/TC 104 resistance of concrete, unidirectional diffusion EN 1708-1 Welding - Basic welded joint details in steel - Part 1: Pressurized 31.7.2010 31.7.2010 CEN/TC 121 components EN ISO 9539 Gas welding equipment - Materials for equipment used in gas welding, 31.7.2010 31.7.2010 CEN/TC 121 cutting and allied processes (ISO 9539:2010) EN 14250 Timber structures - Product requirements for prefabricated structural 31.7.2010 31.7.2010 CEN/TC 124 members assembled with punched metal plate fasteners EN 15649-4 Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices 31.7.2010 31.7.2010 CEN/TC 136 EN 838 EN 15856 EN 15857 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid Non-destructive testing - Acoustic emission - Testing of fibre-reinforced polymers - Specific methodology and general evaluation criteria 31.7.2010 31.7.2010 CEN/TC 137 31.7.2010 31.7.2010 CEN/TC 138 31.7.2010 31.7.2010 CEN/TC 138 Strana 1
CEN ISO/TS 22367 Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) CEN/TC 140 CEN/TS 13001-3-5 Cranes - General design - Part 3-5: Limit states and proof of CEN/TC 147 competence of forged hooks EN 13000 Cranes - Mobile cranes 31.7.2010 31.7.2010 CEN/TC 147 EN 1459:1998+A2 Safety of industrial trucks - Self-propelled variable reach trucks 31.7.2010 31.7.2010 CEN/TC 150 EN 14957:2006+A1 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements 31.7.2010 31.7.2010 CEN/TC 153 EN 14404:2004+A1 Personal protective equipment - Knee protectors for work in the kneeling 31.7.2010 31.7.2010 CEN/TC 162 position EN 15796 Chemicals used for treatment of swimming pool water - Calcium 31.7.2010 31.7.2010 CEN/TC 164 hypochlorite EN 15797 Chemicals used for the treatment of swimming pool water - Iron based 31.7.2010 31.7.2010 CEN/TC 164 coagulants EN 15798 Products used for the treatment of swimming pool water - Filter media 31.7.2010 31.7.2010 CEN/TC 164 EN 15799 EN ISO 15752 Products used for treatment of swimming pool water - Powdered activated carbon Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010) 31.7.2010 31.7.2010 CEN/TC 164 31.7.2010 31.7.2010 CEN/TC 170 EN ISO 12625-12 Tissue paper and tissue products - Part 12: Determination of tensile 31.7.2010 31.7.2010 CEN/TC 172 strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) EN 15845 Paper and board - Determination of the cytotoxicity of aqueous extracts 31.7.2010 31.7.2010 CEN/TC 172 EN 1313-1 Round and sawn timber - Permitted deviations and preferred sizes - Part 31.7.2010 31.7.2010 CEN/TC 175 1: Softwood sawn timber EN 1315 Dimensional classification of round timber 31.7.2010 31.7.2010 CEN/TC 175 EN 287-6 Qualification test of welders - Fusion welding - Part 6: Cast iron 31.7.2010 31.7.2010 CEN/TC 190 EN 13415 Test of adhesives for floor covering - Determination of the electrical 31.7.2010 31.7.2010 CEN/TC 193 resistance of adhesive films and composites EN 1804-1:2001+A1 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements 31.7.2010 31.7.2010 CEN/TC 196 Strana 2
EN 1804-2:2001+A1 EN 1804-3:2006+A1 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems 31.7.2010 31.7.2010 CEN/TC 196 31.7.2010 31.7.2010 CEN/TC 196 EN 1829-1 High pressure water jet machines - Safety requirements - Part 1: 31.7.2010 31.7.2010 CEN/TC 197 Machines EN 14434 Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods 31.7.2010 31.7.2010 CEN/TC 207 EN ISO 7396-1:2007/A1 Medical gas pipeline systems - Part 1: Pipeline systems for compressed 31.7.2010 31.7.2010 CEN/TC 215 medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses (ISO 7396-1:2007/Amd 1:2010) EN 15037-4 Precast concrete products - Beam-and-block floor systems - Part 4: 31.7.2010 31.10.2011 CEN/TC 229 Expanded polystyrene blocks EN 15843 Water quality - Guidance standard on determining the degree of 31.7.2010 31.7.2010 CEN/TC 230 modification of river hydromorphology EN 14353:2007+A1 Metal beads and feature profiles for use with gypsum plasterboards - 31.7.2010 31.7.2010 CEN/TC 241 Definitions, requirements and test methods EN ISO 105-A01 Textiles - Tests for colour fastness - Part A01: General principles of 31.7.2010 31.7.2010 CEN/TC 248 testing (ISO 105-A01:2010) EN 1991-1-4:2005/AC Eurocode 1: Actions on structures - Part 1-4: General actions - Wind CEN/TC 250 actions EN 14695 Flexible sheets for waterproofing - Reinforced bitumen sheets for 31.7.2010 31.10.2011 CEN/TC 254 waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics EN 14067-6 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment 31.7.2010 31.7.2010 CEN/TC 256 EN 15723 Railway applications - Closing and locking devices for payload protecting 31.7.2010 31.7.2010 CEN/TC 256 devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling CEN/TR 15983 Stationary source emissions - Guidance on the application of EN 14181:2004 CEN/TC 264 Strana 3
CEN/TS 28701 Road transport and traffic telematics - Public transport - Identification of fixed objects in public transport EN 12817 LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³ EN ISO 19115-2 Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009) EN 14701-4 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges CEN/TR 14383-5 Prevention of crime - Urban planning and building design - Part 5: Petrol stations EN ISO 9261 Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004) EN 14961-1 Solid biofuels - Fuel specifications and classes - Part 1: General requirements CEN/TS 15963 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen EN 3228 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 235 C EN 3435 Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 C CEN/TC 278 31.7.2010 31.7.2010 CEN/TC 286 31.7.2010 31.7.2010 CEN/TC 287 31.7.2010 31.7.2010 CEN/TC 308 CEN/TC 325 31.7.2010 31.7.2010 CEN/TC 334 31.7.2010 31.7.2010 CEN/TC 335 CEN/TC 336 EN 3653 EN 3750 Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 C Aerospace series - Nuts, anchor, self-locking, fixed, 90 corner, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 C EN 3763 Aerospace series - Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Strana 4
EN 3834 EN 4125 EN 4126 EN 4645-001 Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Aerospace series - Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 C Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification EN 2240-003 Aerospace series - Lamps, incandescent - Part 003: Lamp, code 44 - Product standard EN 2240-004 Aerospace series - Lamps, incandescent - Part 004: Lamp, code 47 - Product standard EN 2240-010 Aerospace series - Lamps, incandescent - Part 010: Lamp, code 84 - Product standard EN 10305-1 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes EN 10305-2 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes EN 10305-3 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes EN 10305-5 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes CWA 16073-0 Business Interoperability Interfaces for Public procurement in Europe - Part 0: Introduction CWA 16073-1 Business Interoperability Interfaces for Public procurement in Europe - Part 1: Profile overview Strana 5
CWA 16073-2 Business Interoperability Interfaces for Public procurement in Europe - Part 2: Convergence and gap analyses CWA 16073-3 Business Interoperability Interfaces for Public procurement in Europe Part 3: Toolbox Requirements CWA 16073-4 Business Interoperability Interfaces for Public procurement in Europe Part 4: Evaluation guidelines for testing and piloting CWA 16076 ECTS Information Package/Course Catalogue MLO Application Profile CWA 16077 Educational Credit Information Model CWA 16078 Curriculum Exchange Format Strana 6