HG Home Guardian Advanced Home Energy, Safety and Security Management

Product Sheet CT2.12 Controller Type HG HG Home Guardian Advanced Home Energy, Safety and Security Management EH Home Guardian TM is an intelligent control and monitoring unit for your house or holiday home. Home Guardian combines uniquely heating/cooling and hot water controls, fire alarm, intruder alarm, gas leak detection, water leak detection and mains power monitoring. Additional auxiliary channel is provided to control any equipment remotely or via a time schedule. This can be used for example for garden sprinkler or lighting control. Home Guardian can be fully controlled from your mobile phone using text messages or using state-of-the-art graphical user interface on Symbian Series 60 picture phones (e.g. Nokia 3650, 6600, 7650, Siemens SX-1). In case of fire alarm, intruder alarm, panic alarm, water leakage or low temperature alarm Home Guardian will automatically send you a text message to notify on the alarm, providing you 24 hours a day access to your home wherever you are. Home Guardian has built-in time and holiday programs for heating, HWS and for auxiliary channel (e.g. garden sprinkler). Unique mobile phone control feature allows to change any Home Guardians settings remotely from your mobile phone. Home Guardian uses accurate temperature sensors to monitor the room temperatures and control heating accordingly. Built-in low temperature protection safeguards the house from frost damages. Remote setpoint adjuster feature is provided for changing easily the set-point. Home Guardian is supplied in number of packs complete with all necessary accessories. Fourteen different colour options are available for the Home Guardian control panel. Model Types Model Description HG1-BRO HG1-SIL HG1-GOL HG1-PLA HG1-DIA Options Part Number Option Description HG-COL-MET-TIT Metallic Titanium Colour Option HG-COL-WAL English Walnut Colour Option HG-COL-BLK Toner Black Colour Option HG-COL-WHT Cloud White Colour Option HG-COL-RED Geranium Red Colour Option HG-COL-BRG Classic Burgundy Colour Option HG-COL-GRN-VEN Venetian Green Colour Option HG-COL-GRN-RAC Racing Green Colour Option HG-COL-BLU-SKY Sky Blue Colour Option HG-COL-BLU-JAZ Jazz Blue Colour Option HG-COL-YEL Corn Yellow Colour Option HG-COL-CHR Soft Chrome Colour Option HG-COL-GLD Antique Gold Colour Option Home Guardian Bronze Pack with Accessories for Temperature and Hot Water Control, Metallic Slate Colour Home Guardian Silver Pack with Accessories for Temperature and Hot Water Control, and for Water Leak Detection and Mains Water Shut- Off, Metallic Slate Colour Home Guardian Gold Pack with Accessories for Temperature and Hot Water Control, and for Smoke Detection, Metallic Slate Colour Home Guardian Gold Pack with Accessories for Temperature and Hot Water Control, Intruder Alarm and Smoke Detection, Metallic Slate Colour Home Guardian Gold Pack with Accessories for Temperature and Hot Water Control, Intruder Alarm, Gas Leak and Smoke Detection, and for Water Leak Detection and Mains Water Shut-Off, Metallic Slate Colour Online Store: www.syxthsense.com Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 1/8

Functions User Interface Options Intruder alarm motion detection, building shell monitoring (window and door contacts) Panic alarm Heating control (combi boilers, traditional boilers) Hot water control Smoke detection Water leak detection Gas leak detection (natural gas) Auxiliary control (general purpose remote and timed control output) Power supply and battery monitoring Home Guardian has 10 built-in LEDs to indicate the current operation of the device. Home Guardian can be used with any text message capable mobile phone, or with Symbian Series 60 enabled mobile phones that have graphical colour user inteface. The graphical user interface software is provided freeof-charge. Graphical User Interface (Symbian S60 enabled mobile phones) Home Guardian can be controlled through graphical user interface making daily interactions very easy. The alarms are automatically sent to your phone, and the system can be interrogated easily remotely from anywhere in the World. The graphical user interface works with Symbian S60 enabled mobile phones. The following phones have been tested with the Home Guardian: Nokia 6600, 6630, 7650, 9210i, 9500, 3650, 7610 and Siemens SX-1. Traditional Text Message Use (any mobile phone) Home Guardian can be interrogated using traditional text messages. In the event of alarm Home Guardian will also send an alarm message to selected phone number. Up to four phone numbers are available as alarm destinations: FIRE, SECURITY, USER and BACK-UP numbers. To interrogate Home Guardian, simply send a text message with the relevant KEYWORD prefixed with the Device ID (security number). Home Guardian will return a relevant answer back as a text message. If any settings are required to be changed, simply send a relevant setting change to the device. If you forget the KEYWORDS, just simply ask the Home Guardian to send you a list of KEYWORDS. Home Guardian Options Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 2/8

Technical Data Power Supply 230Vac, 50Hz -Home Guardian Battery Back-Up Protection Class Ambient Temperature 0 50 C Storage Temperature Weight Mounting Dimensions 12Vdc 2.5Ah Battery Supplied with Home Guardian IP30 Home Guardian -20 70 C 3.5kg - Home Guardian Flush Mounting 320W x 255H -Home Guardian Flush Mounting Panel Cover Inputs Input Home Guardian Connection PANIC Panic Alarm Button KEYPAD Intruder Alarm Activation Keypad (Remote Keypad) CONDEN Condensation Sensor SMOKE Smoke/Gas Detectors DET S.P. Remote Temperature Set-Point Adjustment TEMP Room Temperature Measurement P.I.R Intruder Alarm PIR and Door Contacts Loop TAMPER External Tamper Alarm Contacts Outputs Output Home Guardian Connection HEAT (R1) Heating Output, 230Vac 10A (Fused 2A) HWS (R2) Hot Water Output, 230Vac 10A (Fused 2A) COOL (R3) Cooling Output, 230Vac 10A (Fused 2A) AUX (R4) Auxiliary Channel (Garden Lights / Sprinkler etc.), 230Vac 10A (Fused 2A) WATER (R5) Water mains shut-off valve (Water Leak Monitoring), 230Vac 10A (Fused 2A) LOW TEMP (R6) SOUND BELL Low Temperature Alarm Output, 230Vac 10A (Fused 2A) External Sounder Connection (Sound Bomb, 12Vdc) Intruder Alarm Bell Box (Negative Trigger Voltage) User Overrides (Outputs) Override Operation Heating Permanently On Permanently Off - Automatic Hot Water Permanently On Permanently Off - Automatic Sounder Silence Built-In Sounder: Silenced or Normal Service Overrides (Outputs) Override Operation Cooling Permanently On Permanently Off - Automatic Auxiliary Permanently On Permanently Off - Automatic Water Permanently On Permanently Off - Automatic Supply Valve Low Temp Alarm Permanently On Permanently Off - Automatic Communication Supported Mobile Networks EMC Directive Interference Emissions Low Voltage Directive Safety Built-In Mobile Phone Interface; text messaging or graphical Symbian S60 application Any 89/336/EEC, 92/31/EEC EN50082-1 EN50081-1 72/23/EEC EN60730-1 Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 3/8

Heating Controls Home Guardian has been designed to provide heating controls for regular and combi boilers. The heating control module measures the room temperature (TEMP). When the room temperature drops below the set-point, the heating output is switched on (R1 - HEAT). Home Guardian has built-in time clock that enables switching between DAY and NIGHT MODES. Up to 14 switching points are available to provide flexible but simple ways to control to the required temperature. For example, the controller can be easily configured to switch Mon-Fri heating to DAY SETPOINT from 07:00hrs to 10:00hrs and 17:00hrs to 22:00hrs, Saturday 07:00hrs to 13:00hrs and 18:00hrs to 23:hrs, and on Sunday 09:00hrs to 23:00 hrs. Home Guardian has built-in calendar function for switching the heating system to NIGHT MODE for example during the holidays. In addition using a Special Day feature temporary switching times can be assigned to multiple dates. In DAY MODE the Home Guardian controls to a DAY SETPOINT (adjustable, default 21 C) and in the NIGHT MODE to NIGHT SETPOINT (adjustable, default 9 C), offering energy efficient control. When the heating output is on, HEATING REQUEST LED is lit. The DAY set-point can be adjusted from the room sensor by turning the set-point knob clockwise (increases set-point up to 5 C) or counter-clockwise (degreases set-point up to 5 C). Home Guardian has built-in low room temperature monitoring. This feature switches the low room temperature relay (LOW TEMP R6) ON when the temperature drops below the setpoint of 5 C (adjustable). In case of low temperature alarm, an alarm text message is sent to the USER number, HEATING REQUEST LED is flashing and low room temperature relay (LOW TEMP - LT.A) is switched on. Typically LOW TEMP relay is connected to an external electric heater to provide auxiliary heating in case of low temperature. Heating can be switched via mobile phone (text messages or graphical application) permanently to DAY MODE (MAN ON), permanently to NIGHT MODE (MAN OFF) or to Automatic Control (AUTO). The DAY and NIGHT modes can also be overridden ON to a specified time (timer control). In addition, out of time program ON periods e.g. 10:00 to 04:00 an external Heating Advance Switch is provided to override the heating and hot water services permanently ON. Home Guardian Room Sensor with Setpoint Adjustment Pump Mid-Position Valve Figure 1. Home Guardian with Regular Boilers Cooling Controls Home Guardian has been designed to provide cooling controls for direct expansion equipment. The cooling controls module measures the room temperature (TEMP). When the room temperature increases above the set-point, the cooling output is switched on (R3 - COOL). Home Guardian has built-in time clock that enables switching between DAY and NIGHT MODES for cooling. The time clock is shared with the heating control. Please see heating controls for further details. In DAY MODE the Home Guardian controls to a DAY SETPOINT (adjustable, default 22 C) and in the NIGHT MODE to NIGHT SETPOINT (adjustable, default 26 C), offering energy efficient control. When the cooling output is on, COOLING REQUEST LED is lit. The DAY set-point can be adjusted from the room sensor by turning the set-point knob clockwise (increases set-point up to 5 C) or counter-clockwise (degreases set-point up to 5 C). Temperature control can be switched via mobile phone (text messages or graphical application) permanently to DAY MODE (MAN ON), permanently to NIGHT MODE (MAN OFF) or to Automatic Control (AUTO). The DAY and NIGHT modes can also be overridden ON to a specified time (timer control). Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 4/8

HWS Control Home Guardian has independent time program for the Hot Water Services. When the time schedule is in ON the HWS relay is energised, and HOT WATER REQUEST LED is lit. Using a built-in calendar function the hot water can be switched OFF, for example, during the holidays. Special Day feature enables temporary hot water ON switching periods on designated dates. Hot water can be switched via mobile phone (text messages or graphical application) permanently ON (MAN ON), permanently OFF (MAN OFF), to Automatic Control (AUTO) or to a timed ON (e.g. for 3 hours). In addition, using an external Hot Water Advance Switch hot water services can be permanently switched ON. Intruder Alarm Intruder alarm feature of Home Guardian monitors the building for unwanted visitors. Home Guardian can be connected to motion detectors (PIR) and/or door/window contacts (PIR input). In the event of alarm, Home Guardian will send an alarm message to the SECURITY and USER numbers, and INTRUDER ALARM LED starts flashing. A bell box connected to the BELL output is activated and optional sounder/siren connected to SOUNDER output are also activated. The Home Guardian built-in sounder follows the SOUNDER output. The intruder alarm feature is activated through the KEYPAD contact, which is linked to the remote intelligent keypad (supplied with two wireless keyfobs). The intruder alarm can be activated remotely from a mobile phone user with secure access code. Once the intruder alarm has been activated, the alarm can be acknowledged either by entering the security code through the keypad, or by sending acknowledgement message from the mobile phone. Acknowledging the alarm silences the alarm outputs (BELL and SOUNDER outputs). If not acknowledged, the sirens remain active for an alarm time period (default for 10 minutes). The intruder alarm has built-in entry (30s default), exit delay (30s default) and alarm time (10min default) settings. Once the intruder alarm has been activated and a motion detector detects movement or door/window contact is opened, the INTRUDER ALARM LED starts flashing for the entry delay time. After the entry delay the intruder alarm is activated. By activating the intruder alarm through the remote keypad, the Home Guardian enters to exit delay mode. In this mode the INTRUDER ALARM LED is off until exit delay has expired. This allows the user sufficient time to exit the property. Panic Alarm Home Guardian has a panic alarm function. When the panic alarm input is opened, the Home Guardian will send an alarm message to the SECURITY and USER numbers, the INTRUDER ALARM LED starts flashing, the built-in sounder and the external bell box are activated. Optional sounders can be connected to the SOUNDER output. Sounder and bell box outputs will switch off after alarm time period has elapsed (5 minutes) and or if the alarm is acknowledged by a text message. Gas Leak Detection Home Guardian can also be used with Gas Detectors to monitor for potential gas leaks. When Home Guardian detects gas (contact SMOKE opens normally closed), the FIRE/GAS ALARM LED is lit, and alarm message is sent to the FIRE and USER numbers. In addition, the SOUNDER output and the builtin sounder is switched on. Fire Alarm Home Guardian has been designed according to BS5839-6 to meet the requirements of Grade E fire alarm system (Grade B available as an upgrade). The smoke detectors within the premises are connected to the HG. In case of fire, the FIRE/GAS ALARM LED starts flashing, and an alarm message is sent to the FIRE and USER numbers. In addition, the internal sounder, smoke alarms (requires interconnect wires) and additional sounders are switched permanently ON until the fire condition does not exist. HG Control Panel has a SILENCE button to silence the smoke alarms and sounders for false alarms. If the silence button is left ON, the Home Guardian beeps every 10 minutes to warn of the silencing of the smoke detectors. Note: To comply with fire regulations the smoke detectors that are used with Home Guardian must have built-in sounder. Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 5/8

Water Leak Detection Home Guardian has water leakage detection feature for protecting the building from water damage e.g. from leaking washing machine. When a water leak is detected, an alarm message is sent to USER number, the relay WATER R5 is opened, and WATER LEAK DETECTED LED is lit. WATER relay is connected to a shut off valve to cut the mains water supply in order to minimise the damage. Auxiliary Channel (Sprinkler / Lights Control) Home Guardian has also an auxiliary output (AUX R4) that can be controlled by time program or from mobile phone. This feature can be used, for example, to control garden sprinkler or lights. When AUX relay is switched on, AUXILIARY CHANNEL LED is lit. Time Program can have up to 14 switching points enabling the flexible control of the auxiliary output. Calendar function is provided to switch the output ON during the specified dates and times. The auxiliary output can also be set ON to a timed period from a mobile phone. For example the output can be switched ON for 30 minutes. Power Supply Monitoring Home Guardian has built-in power monitoring circuit. In case of power failure an alarm text message is sent to USER number and the unit is switched to operate on battery. Note: When the unit is operating from battery, it will continue monitoring its inputs for alarm conditions, and sending alarm text messages. The control outputs are disabled to maximise the battery operational time. Accessories HG-KEYFOB Wireless Access Keyfob HG-SEN-COND 2m Tape Water Leakage Detector HG-SMOKE-ION 12Vdc Ionisation Smoke Detector HG-SMOKE- HEAT 12Vdc Heat Detector HG-SMOKE-OPT 12Vdc Optical Smoke Detector HG-PIR-STD Digital Motion Detector HG-PIR-QUAD Motion Detector with Pet Immunity HG-MC-F Magnetic Door Contact (Flush) HG-MC-S Magnetic Door Contact (Surface) Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 6/8

Home Guardian Control Panel Overview Home Guardian control panel is a complete package with intelligent electronics, built-in GSM interface for mobile connectivity and manual override switches. The control panel consist of two major parts: Home Guardian main board for low-voltage wiring the base board for the mains voltage wiring. Home Guardian Base Board Overview Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 7/8

Dimensions All measurements are in mm. Enquiries: T: 0870 20 80 100 F: 0870 20 80 200 PS CT2.12 8/8