SASH WINDOWS
01 david salisbury Species Engineered Siberian Larch Engineered Red Grandis Engineered European Oak Idigbo Colour/Finish Three coats of Microporous Teknos Paint Wide Range of Standard Colours Translucent Finishes RAL Code Matching Glazing Toughened safety glass double glazing is standard. Low emissivity, tinted, obscure and laminated glass are all available as options at an additional cost. Trickle Vent TFF Slimline 1250, 2500, 5000 Sizes Frame Depth = 144mm or 160mm Sash Depth = 56mm Sash Stile Width = 55mm Mechanism Pre-Tensile Spiral Balance springs; or, Counter Balanced Lead Weights
david salisbury 02 Sash Windows Our bespoke sliding sash windows are supplied with traditional weights and pulleys, or modern spiral balanced mechanisms. Spiral balances are neatly concealed behind a timber trim meaning no un-sightly mechanism is on display. With years of manufacturing experience, we have produced a comprehensive range of vertical sliding windows including semi-circular heads and bow fronted windows. Our Sash Windows are suitable for new-build, refurbishment and commercial projects. Beautiful design with precision manufacture gives our sliding sash windows a traditional appearance with superior modern performance Traditional lead weights and pulleys or modern spiral balances with concealed mechanisms Timber from sustainable sources Factory finished in an automated paint plant, with three coats of micro-porous paint Factory glazed with concealed glazing pins Curved or square head windows Choice of mouldings and architraves
03 david salisbury
david salisbury 04 SASH WINDOWS, LANCASHIRE This 17th century farmhouse in the Lancashire countryside has been lovingly restored by its owners with a complete rennovation. This was part of a larger project which included replacing all windows with modern timber sliding sash and to the rear of the home, a beautiful large orangery extension was added. The sash windows are perfectly inkeeping with the home and the raw hessian colour blends well with the pale brickwork.
05 david salisbury Our beautifully crafted sash windows are available with both traditional counterbalanced lead weights or concealed spring balances. Whichever option you decide, you will be presented with a smooth operating window that will enhance the look of your property for many years to come. Weatherproofing Gasket Our window gasket system is designed to provide you with a draught-free weather seal, while our frames are designed to allow any excess water to drain off. Lead Weights Lead weighted windows are the traditional system for vertical sliding windows. The weight of the opening sash is counterbalanced by lead weights that provide just the right amount of counter balance to support the sash, but not too much so that the window can be smoothly opened. We only use the highest quality sash cord within our windows. Spiral Balances Spiral balance operation gives a modern and cost effective alternative to traditional lead weights. Using a pre-tensioned spring system, they are designed to counter balance the sash, holding it in any position. Whilst balances aren t designed as a mechanical opening device, they do give some level of assistance when opening the window. Unlike many suppliers currently on the market, our spiral balances are hidden within the window framework meaning you do not see any unsightly, plastic tubing in our windows. Frame Types As well as the two different lift systems, we also have two different frame types to choose from. Our standard frame depth of 160mm is suitable for most situations; however we also have a slimmer 144mm depth heritage sash window. This sash window is popular in period buildings and can accommodate slimlite glass and single glazing. Moulds We offer a range of sash moulds allowing you to further customise your windows. Internal sash moulds are available in Ovolo, Lambs Tongue or Square. Horns Moulded sash horns are available to top and bottom sashes. Simply specify your preference when requesting a quotation. Specials Our experience and advanced manufacturing techniques allow us to produce extremely varied designs including products such as curved glass windows. Where practical, we can alter rail or style widths to suit the design requirements. Variations of glass specification, finish and ironmongery options can all accommodated. Our expertise and flexibility allow us to deliver a quality product whilst still giving the ability to customise your joinery. Nosings External sill nosings are fitted on site into a pre-machined groove in the framing. These come in a range of projection sizes: 30mm (stub), 80mm (standard), 107 or 137 (extended). We can also supply internal painted windowboards on request. These are available in MDF or Hardwood and slot into a pre-machined grove on the internal face of the frame sill.
david salisbury 06 Below are standard CAD section details for our Sash Windows. CAD drawings can be produced on request in order to support you when specifying our products. 160mm Spiral Balance 160mm Lead Weights
07 david salisbury Timber David Salisbury has carefully selected the best timber for each application within our product range. Our frames, sashes and roof timbers are manufactured from Engineered Siberian Larch where a solid colour finish is required unless otherwise specified. Engineered Red Grandis and Idigbo are utilised in decorative fascia and pilaster applications.where a translucent finish is required, we will manufacture from Idigbo only.where requested, we are also able to offer FSC certified products sourced from responsibly managed forest. Glazing bead and bonded bar sets are manufactured from Qwood where the product is non-translucent and does not have any curved beading or bars. Qwood is a composite derived from timber sourced in sustainably managed forests. For any product requiring a translucent finish or curved beading or bars, Idigbo will be used. Selected timber sections are used for a combination of strength, durability, machining flexibility and an ability to accept a wide range of finishes.These timbers are naturally resistant to wood rot and fungal attack and the natural oils present in the timber make it resistant to moisture penetration. SPECIES HARDNESS (JANKA TEST) DENSITY RUPTURE SHRINKAGE Siberian Larch 1100 lbf 575 kg/m³ 15,050 lbf/in² Radial: 3.9%, Tangential: 6.8%, Volumetric: 10.5% Idigbo 850 lbf 530 kg/m³ 12,000 lbf/in² Radial: 3.5%, Tangential: 5.2%, Volumetric: 9.0% Eucalyptus Grandis 1060 lbf 560 kg/m³ 15,640 lbf/in² Radial: 5.9%, Tangential: 10.1%, Volumetric: 15.5% Oak 675 kg/m³ 14,100 lbf/in² Radial: 4.7%, Tangential: 8.4%, Volumetric: 13.0% 1120 lbf *We reserve the right to use alternative timbers without notice depending on design, supply and market conditions. **Any translucent finish will be manufactured from the same timber throughout.
david salisbury 08 Factory Glazing The casement windows are all glazed in our workshop by our highly skilled team of glaziers. The external beading profile is designed to replicate the look of a traditional bead while utilising modern manufacturing techniques and a concealed pin system which ensures a blemish-free surface to the glazing bead. A full range of glass specifications are available. Glass We offer a full range of glass units including slight-lite units, internal blinds, triple glazing and switchable glass. We can supply various other options to improve U-values, reduce heat gain or to ensure greater security. Etched or patterned glazing can also be supplied. 24mm double glazed sealed units manufactured to a 4-16-4 configuration. Conforms to BS5713* Toughened safety glass as standard Factory glazed using a fully sealed system Low emissivity, solar control, tinted, easy-clean, obscure and laminated glass are all available as options at an extra cost * A summary of the relevant British Standard can be found on www.bsonline.techindex.co.uk Fenestration A choice of 18mm bonded bars or 44mm (34mm or 24mm with slim-light glazing) through bars allow a full range of fenestration options, from Georgian multi-pane units to semi-circular or Gothic beading configurations. Our highly skilled craftsman and precision engineering allow us to create very complex fenestration designs to an extremely high standard. Bonded (Applied) Bars Through Bars
09 david salisbury Hardware for Sash Windows All ironmongery available is available in a range of finishes. INCLUDED AS STANDARD: Locking Brighton Fasteners Sash Lifts Brass Polished Chrome Optional Extras Locking Fitch Fasteners Quadrant Fasteners Locking Hook Fasteners Ring Pulls & Pole Push Ventlock Push Ventlock Available in Brass, Polished Chrome & Satin Chrome
david salisbury 10 Paint Timber is treated with three coats of factory applied micro-porous paint or translucent stain providing a fully finished product. Our fully automated finishing plant provides a high build, uniform paint finish. All paint, primers and finishes are micro-porus, allowing the timber to breathe naturally. A choice of standard paint colours are available. Special colours can also be produced to match any sample or RAL reference number. We can also provide a combination of two-tone internal/external*. ANCHOVY EAGLE SIGHT LIMESTONE PAVILION SAND SMUDGE BARLEY WHITE FLAGSTONE MENDIP GREY PEBBLE WHITE SATIN GREEN SOMERSET CREAM BATH STONE GREEN SLATE MUD FLATS PHAROAH SHAKER CREAM SOUFFLÉ BIRCH HARVEST YELLOW MUSHROOM QUANTOCK S QUEST SHOWER BLUE THATCH BRENDON S BLUE INNER SELF NOAH S WHITE RAW HESSIAN SLIPPER WHITE WATER LILY CORN WHITE LICHEN OLD BOAT SAGE GREEN STONE WHITE * Two-tone finish cannot be applied to any stain COLOUR CHART TO BE USED AS A GUIDE ONLY
SLIDING/FOLDING (BIFOLD) DOORS CASEMENT WINDOWS LANTERN ROOFS SASH WINDOWS DOORS CONSERVATORIES & ORANGERIES David Salisbury Joinery Ltd, Bennett Road, Highbridge, Somerset, TA9 4PW Telephone: 01278 764446 E-mail: commercial@davidsalisbury.com www.davidsalisburycommercial.co.uk