PNEUMATIC CONVEYING SYSTEMS AND STORAGE PELLET PRODUCTS LIST V.01eng
INDEX POSSIBLE APPLICATIONS WITH THE WX Solution A: System of pneumatic conveying of wood pellets with suction probe and local storage. Solution B: System of pneumatic conveying of wood pellets with two suction probes and local storage. Solution C: System of pneumatic conveying of wood pellets for pellet stove or thermo fireplace with silo. Solution D: System of pneumatic conveying of wood pellets with multiple suction probes and local storage. pag. 4 pag. 5 pag. 6 pag. 7 Solution E: System of pneumatic conveying of wood pellets with suction big-bag. pag. 8 Solution F: System of pneumatic conveying of wood pellets from underground storage tank. pag. 9 Solution G: System of pneumatic conveying of pellets from storage silo. pag. 10 Solution H: System of pneumatic conveying of wood for long distances pellets for high distances. PRODUCTS AND ACCESSORIES pag. 11 PNEUMATIC CONVEYOR WX5 pag. 12 PNEUMATIC CONVEYOR WX10 pag. 13 PNEUMATIC CONVEYOR WX15 pag. 14 PNEUMATIC CONVEYOR WX50-55 pag. 15 GALVANIZED STEEL SILO pag. 16 INDOOR SACK SILO pag. 17 SPARE PARTS pag. 18. Pag 2 www.denaspirazioni.com info@denaspirazioni.com
ADVANTAGES OF THE SYSTEM PNEUMATIC WX The pneumatic conveyors Dena series WX offer significant advantages over traditional power systems, the most advantageous is on the possibility to exploit the return air of the turbine that is conveyed inside the suction probe so it happens a gradual and continuous distribution of pellets in the intake circuit, it is possible to combine the WX to any type of silos or storage warehouse with flat bottom without the aid of mechanical systems of extraction. Economic With the WX can build a metal container, wood or masonry elementary building saving the cost of purchasing the storage silos. Pneumatic conveying suction Among the numerous advantages the ability to perform, complex paths, the absence of leaks or spills of material and the simplicity of the system Automatic operation The functioning of WX is fully automatic. Quick and easy installation The installation and commissioning are carried out quickly and easily. Compatible with all boilers and pellet stoves The available versions allow the application of any boiler or pellet stove on the market and any silo interior, exterior or basement. Gentle treatment During the pneumatic transport the pellets is unloaded at destination clean and perfectly intact Pag 3 www.denaspirazioni.com info@denaspirazioni.com
Solution A: Pneumatic conveying system of wood pellets with suction probe and local storage. 2 3 1 1 Suction probe art n PR0001 2 Discharge hopper WX10 art n WX1001 3 Suction motor WX10 art n WX1002 4 Hose pneumatic conveying pellets art n TB0001 5 Return air hose art n TB0001 6 Storage room Pag 4 www.denaspirazioni.com info@denaspirazioni.com
Solution B: Pneumatic conveying system of wood pellets with two suction probes and local storage 2 3 1 1 Suction probe art n PR0001 2 Discharge hopper WX10 art n WX1001 3 Suction motor WX10 art n WX1002 4 Hose pneumatic conveying pellets art n TB0001 5 Return air hose art n TB0001 6 Storage room Pag 5 www.denaspirazioni.com info@denaspirazioni.com
Solution C: Pneumatic conveying system of wood pellets for pellet stove or thermo fireplace with silo. 1 5 6 1 Discharge hopper WX5 art n WX5005 2 Storage silo of 1 m 3 art n SL001M 3 Hose pneumatic conveying pellets art n TB0001 4 Return air hose art n TB0001 5 Connection module for the suction system art n PR00ES 6 Suction motor WX10 art n WX1002 Pag 6 www.denaspirazioni.com info@denaspirazioni.com
Solution D: Pneumatic conveying system of wood pellets with multiple suction probes and local storage. 2 5 3 1 1 Suction probe art n PR0001 2 Discharge hopper WX10 art n WX1001 3 Suction motor WX10 art n WX1002 4 Return air hose art n TB0001 5 Manual changeover unit art n PR0011 6 Hose pneumatic conveying pellets art n TB0001 Pag 7 www.denaspirazioni.com info@denaspirazioni.com
Solution E: Pneumatic conveying system of wood pellets with suction big-bag. 2 1 1 Suction probe big-bag art n PR3669 2 Pneumatic conveyor WX15 art n WX1015 3 Hose pneumatic conveying pellets art n TB0001 4 Return air hose art n TB0001 Pag 8 www.denaspirazioni.com info@denaspirazioni.com
Solution F: Pneumatic conveying system of wood pellets from underground storage tank. 1 1 Pneumatic conveyor WX15 art n WX1015 2 Return air hose art n TB0001 3 Hose pneumatic conveying pellets art n TB0001 Pag 9 www.denaspirazioni.com info@denaspirazioni.com
Solution G: Pneumatic conveying system of pellets from storage silo. 2 3 1 1 Connection module for the suction system art n PR00ES 2 Discharge hopper WX10 art n WX1001 3 Suction motor WX10 art n WX1002 4 Return air hose art n TB0001 5 Hose pneumatic conveying pellets art n TB0001 6 Storage silo of 1 m 3 art n SL001M Pag 10 www.denaspirazioni.com info@denaspirazioni.com
Solution H: Pneumatic conveying system of wood for long distances pellets for long distances. 2 5 1 1 Connection module with extraction screw art n CE00WX 2 Discharge hopper WX15G art n WXG115 3 Steel pipe pneumatic conveying pellets art n TB0002 4 Steel pipe in depression art n TB0002 5 Suction motor WX55 art n WX1055 6 Storage silo of 1 m 3 art n SL001M Pag 11 www.denaspirazioni.com info@denaspirazioni.com
PNEUMATIC CONVEYOR WX5 The pneumatic conveyor WX5 is ideal for dosing granular products to automate your system with minimal expense and maintenance. IDEAL FOR PELLET STOVES AND BIOMASS BOILERS AUTOMATIC OPERATION ADAPTABLE FOR ANY SYSTEM PROGRAMMABLE BAND STANDARD EQUIPMENT Lcd control panel Cartridge filter in polyester Level sensor Exhaust valve product Cable alimentation shuko of 3 mt Cable alimentation sensor of 2 mt MODEL Unit of measure WX5 WX5-S Power W 1500 1500 Voltage V 230 230 Frequency Hz 50 50 Hopper capacity internal lt 3 3 Max. vacuum rate Mbar 2200 2200 Filter cleaning system / Manual Automatic Pressure cleanig system Air - 6 bar Structure Material Steel Steel Total weight kg 22 22 Dimensions motor mm 270 x 210 x H 420 270 x 210 x H 420 Suction inlet mm Ø 50 Ø 50 Dimensions hopper mm 153 x 273 x H 250 153 x 273 x H 250 ACCESSORIES Suction probe PR0001 Antistatic hose Ø 50 (min. 20mt) TB0001 Galvanized steel pipe Ø 50 TB0002 Support bracket for motor WX10 STWX01 90 bend steel CA5001 Hose clamp to article n TB0001 FS0001 Pag 12 www.denaspirazioni.com info@denaspirazioni.com
PNEUMATIC CONVEYOR WX10 The pneumatic conveyor WX10 is ideal for dosing granular products to automate your system with minimal expense and maintenance. IDEAL FOR PELLET STOVES AND BIOMASS BOILERS AUTOMATIC OPERATION ADAPTABLE FOR ANY SYSTEM PROGRAMMABLE BAND STANDARD EQUIPMENT Lcd control panel Cartridge filter in polyester Level sensor Exhaust valve product Cable alimentation shuko of 3 mt Cable alimentation sensor da 2 mt MODEL Unit of measure WX10 WX10-S Power W 1500 1500 Voltage V 230 230 Frequency Hz 50 50 Hopper capacity internal lt 5 5 Max. vacuum rate Mbar 2200 2200 Filter cleaning system / Manual Automatic Pressure cleanig system Air - 6 bar Structure Material Steel Steel Total weight kg 22 22 Dimensions motor mm 270 x 210 x H 420 270 x 210 x H 420 Suction inlet mm Ø 50 Ø 50 Dimensions hopper mm 280 x H 270 280 x H 270 ACCESSORIES Suction probe PR0001 Antistatic hose Ø 50 (min. 20mt) TB0001 Galvanized steel pipe Ø 50 TB0002 Support bracket for motor WX10 STWX01 90 bend steel CA5001 Hose clamp to article n TB0001 FS0001 Pag 13 www.denaspirazioni.com info@denaspirazioni.com
PNEUMATIC CONVEYOR WX15 The pneumatic conveyor WX15 is ideal for dosing granular products to automate your system with minimal expense and maintenance. IDEAL FOR PELLET BOILERS AND BIOMASS AUTOMATIC OPERATION ADAPTABLE FOR ANY SYSTEM PROGRAMMABLE BAND STANDARD EQUIPMENT Lcd control panel Cartridge filter in polyester Level sensor Exhaust valve product Cable alimentation shuko of 3 mt MODEL Unit of measure WX15 WX15-S Power W 1500 1500 Voltage V 230 230 Frequency Hz 50 50 Hopper capacity internal lt 9 9 Max. vacuum rate Mbar 2200 2200 Filter cleaning system / Manual Automatic Pressure cleanig system Air - 6 bar Structure Material Steel Steel Total weight kg 24 24 Ingombro mm 330 x H700 330 x H700 Suction inlet mm Ø 50 Ø 50 ACCESSORIES Suction probe PR0001 Antistatic hose Ø 50 (min. 20mt) TB0001 Galvanized steel pipe Ø 50 TB0002 Hose clamp to article n TB0002 FS0002 Manual changeover unit PR0011 Hose clamp to article n TB0001 FS0001 Pag 14 www.denaspirazioni.com info@denaspirazioni.com
PNEUMATIC CONVEYOR WX50-WX55 The pneumatic conveyor WX50 can pneumatically convey the granules at long distances and with the flow of material up to 400 kg/h. IDEAL FOR PELLET BOILERS AND BIOMASS AUTOMATIC OPERATION ADAPTABLE FOR ANY SYSTEM PROGRAMMABLE BAND STANDARD EQUIPMENT Electrical panel installed on the vacuum motor Filter cleaning system Level sensor Exhaust valve product Vacuum motor remote MODEL Unit of measure WX50 WX55 Power kw 2,2 3 Voltage V 230-380 230-380 Frequency Hz 50 50 Hopper capacity internal lt 9 9 Max. vacuum rate Mbar 1700 2500 Filter cleaning system / Cartuccia autopulente Automatic Pressure cleanig system Air 6 bar 6 bar Structure Material Steel Steel Total weight kg 105 110 Dimensions motor mm 600x 600 x H 1300 600x 600 x H 1300 Suction inlet mm Ø 50 Ø 50 Dimensions hopper mm Ø 280 x H 700 Ø 280 x H 700 ACCESSORIES Suction probe PR0001 Antistatic hose Ø 50 (min. 20mt) TB0001 Galvanized steel pipe Ø 50 TB0002 Hose clamp to article n TB0002 FS0002 90 bend steel CA5001 Hose clamp to article n TB0001 FS0001 Pag 15 www.denaspirazioni.com info@denaspirazioni.com
STORAGE SILO STEEL The storage silo SUM is ideal to complement all air extraction systems. QUICK CONNECTION SUCTION PROBE CONSTRUCTION GALVANIZED STEEL SUITABLE FOR ANY SYSTEM WX MANUAL FILLING WITH BAGS SUPERIOR PROTECTION Volume (m 3 ) Tonnage Height A (cm) Dimensions BxC (cm) Extraction system SL0001M 1 0,65 140 103x103 pneumatic SL0001M 1 0,65 140 103x103 screw (0,18kw) SL0015M 1.5 0,975 190 103x103 pneumatic SL0015M 1.5 0,975 190 103x103 screw (0,18kw) SL0003M 3 1,95 190 103x206 pneumatic SL0003M 3 1,95 190 103x206 screw (0,18kw) SL0005M 5 3,20 250 170x170 pneumatic SL0005M 5 3,20 250 170x170 screw (0,18kw) Assembly in series ACCESSORIES Module with pneumatic extraction PR00ES Module extension by 0,5 m 3 ES0050 Module with extraction screw PRCL01 Filler neck for pneumatic truck storz 4 BR0004 90 bend steel CA5001 Hose clamp to article n TB0001 FS0001 Pag 16 www.denaspirazioni.com info@denaspirazioni.com
STORAGE SILO TEXTILE The flexible pellet silo model SIT is fitted with an auger delivery system and suction adapter. The method of construction allows it to be taken into any room in single parts and put together. Sides and cover of the pellet store are made of flexible and durable antistatic textile material. A compact steel frame, conical base and special delivery system provide optimal and reliable conveying of pellets. QUICK CONNECTION SUCTION PROBE GALVANIZED STEEL FRAME SUITABLE FOR ANY SYSTEM WX PNEUMATIC FILLING SYSTEM MADE OUT OF ANTI-STATIC, HIGH-RESISTANCE POLYESTER Volume (m 3 ) Tonnage Height A (cm) Dimensions BxC (cm) Height D (cm) Extraction system SIT5 5 3.2 204 206x206 225 pneumatic SIT5-C 5 3.2 204 206x206 225 screw (0,18kw) SIT8 8 5.2 204 256x256 225 pneumatic SIT8-C 8 5.2 204 256x256 225 screw (0,18kw) SIT10 10 6.4 204 306x306 225 pneumatic SIT10-C 10 6.4 204 306x306 225 screw (0,18kw) ACCESSORIES Module with pneumatic extraction Articolo n PR00ES Module extension by 0,5 m 3 Articolo n ES0050 Module with extraction screw Articolo n PRCL01 Filler neck for pneumatic truck storz 4 Articolo n BR0004 90 bend steel CA5001 Hose clamp to article n TB0001 FS0001 Pag 17 www.denaspirazioni.com info@denaspirazioni.com
SPARE PARTS Single-phase motor MBP015 Cartridge filter CAR150 Selenoid valve ELE001 Sensor SENSO1 Kit motor brushes MSP015 Lcd control panel CEQ001 Pag 18 www.denaspirazioni.com info@denaspirazioni.com