Global Tech LED 8901 Quality Rd Bonita Springs, FL, 34135 1.877.748.5533 www.globaltechled.com Fuel Station Lighting Solutions
Fuel Station Lighting Why convert to LED? Site lighting of gas stations and truck stops should enhance the visual process of users while providing the following: appropriate illuminance levels, reasonable uniformity ratios, minimal glare and light trespass, and enhance the security of patrons. Clean lighting attracts customers Highlight the main product Fuel Superior lighting provides comfortable and welcoming atmosphere Global Tech LED Lighting Systems for Gas Stations: Conversion to LED saves up to 75% in lighting cost Qualify for utility and government incentives and rebates 10 year warranty Made in the USA Drastically reduced maintenance LED Retrofit kits available for all fixture types New LED fixtures available for all lighting applications Average ROI less than two years Balanced Light Levels Meets Illuminance level guidelines for Gas Stations and Parking Lots as specified by the Illumination Engineering Society of North America (IESNA) Minimal Direct and Reflected Glare Minimal light trespass over property lines meets IESNA vertical and horizontal illuminance standards
Did You Know? Washington State University Energy Program Report showed: Sites that use LED lighting have higher levels of light and attract more customers. Sharper light cutoffs accentuate the site leading to a further aesthetically pleasing appearance. Illuminating the zone between the store entrance and canopy is important to potential customers when choosing between fuel stops. Illuminating the pumps and pillars make them more attractive to potential patrons at a distance portraying a safe, bright, welcoming atmosphere. Attract more customers
Lighting Applications Canopy Average horizontal illuminance does not exceed 30 footcandles conforming to IESNA recommended standards Custom light distribution reduces glare and light trespass High CRI ensures accurate color rendering Various wattage LED modules ensure perfect lighting from standard height canopies to the highest truck canopies LED retrofit kits and new fixtures available Popular Fixtures Popular Retrofits GTL-CP80 30W - 135W Yoke Retrofit 30W-135W GTL-SM019 30W - 135W Canopy Plate Retrofit 30W-135W
Lighting Applications Parking Lot and Site Lighting Custom light distribution ensures proper cut off and no light spillage over property lines Average horizontal illuminance at grade conforms to IESNA standards Smooth and even light distribution across the lot High CRI available for increased nighttime visual acuity and thus safety for automobiles and pedestrians High Mast LED retrofits featuring powerful Solstice LED modules and custom optical distribution ensures even illuminance and meets footcandle requirements on poles up to 150 off the ground while using up to 70% less energy compared to existing HID lamps LED retrofit kits and new fixtures available Popular Fixtures Popular Retrofits Parking/Area GTL-FL70 75W - 270W Parking/Area Plate Retrofit 75W-270W Parking/Area GTL-FL90 270W - 405W Highmast Plate Retrofit 270W-405W
Lighting Applications Building Mounted Lighting Complies with full cut off standards as dictated by IESNA LED retrofit kits and new fixtures available for all applications from recessed fixtures to wallpacks Popular Fixtures Popular Retrofits GTL-WP15 30W - 135W Yoke Retrofit 30W-135W GTL-WP25 30W - 135W Wallpack Plate Retrofit 30W-135W Eco Plate Retrofit 30W-40W
Global Tech LED Solstice Features Life Sync Smart Technology Under Voltage Protection For power outage or brownout. Lumen Depreciation Maintenance Software automatically adjusts current and forward voltage to LED s to guarantee the integrity of the module and no light degradation for 70,000Hrs. Module Temperature Protection Continual self temperature awareness allows our modules to check their temperature in a hot environment and ramp the amperage consumption down in small increments until a safe operating temperature is obtained. They will then continually attempt to ramp amperage up until they reach an equilibrium. DIP Switch Settings 4 DIP Switch settings on board Allows for adjustment of wattage to increase or decrease wattage. On Board Function Settings 5-6-1 Energy Saver Program (save) Operates at 100% output for the first 5 hours of operation, dims to 50% for 6 late evening hours, then ramps back up for the last hour of the evening. This function saves 3 hours of operation per night which results in the equivalent savings of about 1,100 hours per year. Dimm Sync Used when a motion sensor or dimming switch are using a dimming driver to provide the 10V power to the motion sensor or dimming switch Dimm Source Used when a motion sensor or dimming switch are using the LED module to provide the 10V power to the motion sensor or dimming switch. LED Chips Philips Lumiled Luxeon T Chips Deliver high efficacy with high flux density to enable tight beam control in directional and high lumen applications. Thermal Management Mag Lev Fan Zero friction, super quiet, magnetic levitation fan cools unit to help regulate temperature of the LED Modules to prolong the life of the unit. Kelvin Temperature Options 5700K (Green) 5000K (Brown) 4100K (Yellow) 4000K (Blue) 3500K (Red) 3000K (Purple) 2700K (Orange) Optic Options 8 different optical distribution lensing options 10D, 25D, 50D, 75D, 360, 360s, Type II, and Type III optics available. Operating Temperature -45ºC to 85ºC Warranty - 10 year warranty on actively cooled Solstice Modules - 5 year warranty on Eco Boards
Global Tech LED 8901 Quality Rd Bonita Springs, FL 34135 1.877.748.5533 www.globaltechled.com