Section 10. Shop & Service Furniture. Section 10: Suppliers: CALL:

Shop & Service Furniture Workbenches Workstations & Work Centers Wall-Mounted Cabinets Shop/Service Desks Stools & Chairs Section 10: This section features a selection of Shop and Service Furniture available through the Toyota Approved Dealer Equipment program. All product has been reviewed and approved by Toyota Motor Sales, USA. Suppliers: Borroughs Corporation Dell Corning Corporation Equipto Harloff Company Lyon Workspace Products Shure Manufacturing Corporation Snap-on Build-A-Bay 10 For additional product information or to contact a program representative CALL: 1-800-368-6787

Shop & Service Furniture Shop & Service Furniture: This is an introduction to Shop & Service Furniture. Within this section you will find Workbenches, Workstations & Work Centers, Wall-mounted Cabinets, Service/Shop Desks and Stools & Chairs. Some things to consider when shopping for furniture for your service facility, would be: Good: Open workbenches are minimal recommendations for technicians to work on various components off the vehicle. The wider the bench, the more flex encountered. Exposed shelves collect items that often send the wrong message when customers see several boxes and components gathered there. Better: Individual workbenches with doors on the front conceal components and other stored necessities from customers sight, as well as offer greater weight capacity and reduced noise from components on the counter top. Best: Technician work centers are a great way to increase technician retention as well as build customer confidence in the service department. A customers impression of clean, well lit, shiny, uniform work centers in the service department is that of a quality, professional operation. When considering a purchase of any capitol equipment, please contact your regional manager at 1-800-368-6787 for assistance in configuring the proper set-up for your environment. Workbenches supplied by: Borroughs Corporation Transmission Teardown Workbench This Transmission Teardown Workbench with painted steel top, shown with optional tier drawer, is ideal for transmission and engine repair. Includes removable plastic bin. Adjustable leg height with two rigid and two locking casters. 48 x 28 top angles to a drain. BGH11106000 - Transmission Teardown Workbench with painted steel top. BGH14865000 - Tier drawer, dimensions 15-1/4 x 20 x 7-1/4 Enclosed Workbenches Borroughs enclosed workbenches can supply all of your workbench needs with a wide range of heavy-duty equipment for your service department and maintenance areas. No exposed hardware on front, top or back. Adjustable center shelf has a 500 lb. capacity. Painted steel tops are standard, however tops are also available in stainless steel. Heavy-duty (12 gauge) steel legs and work surface. Sliding doors with key lock standard. Full-length enclosed underbench cabinet with full-length top and bottom door tracks. 300 Series Workbench BGHWCL300-48 W x 34 H x 28 D. BGHWCL300SS - 48 W x 34 H x 28 D with stainless steel top. BGHWCL302-60 W x 34 H x 28 D. BGHWCL302SS - 60 W x 34 H x 28 D with stainless steel top. BGHWCL304-72 W x 34 H x 28 D. BGHWCL304SS - 72 W x 34 H x 28 D with stainless steel top. : BGH11106-000 & BGH14865-000 Shown together BGHWTL300 10-1 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-1

Shop & Service Furniture Section 10 Workbenches supplied by: Borroughs Corporation Open Leg Workbenches Borroughs can supply all your workcenter needs with our 100, 120, 130 and 300 series Open Leg Workbenches. Now available with durable and easy to clean stainless steel tops for a high quality look. Leg height adjustment from 28 to 36 on 1 centers. 100 Series BGHWB100 - Open leg, 48 W x 28 H. BGHWB100SS - Open leg, stainless steel, 48 W x 28 H. BGHWB102 - Open leg, 60 W x 28 H. BGHWB102SS - Open leg, stainless steel, 60 W x 28 H. BGHWB104 - Open leg, 72 W x 28 H. BGHWB104SS - Open leg, stainless steel, 72 W x 28 H. 130 Series BGHWB130 - Open leg with lower shelf, back and end guards, 48 W x 28 H. BGHWB130SS - Open leg with lower shelf, back and end guards, stainless steel, 48 W x 28 H. BGHWB132 - Open leg with lower shelf, back and end guards, 60 W x 28 H. BGHWB132SS - Open leg with lower shelf, back and end guards, stainless steel, 60 W x 28 H. BGHWB134 - Open leg with lower shelf, back and end guards, 72 W x 28 H. BGHWB134SS - Open leg with lower shelf, back and end guards, stainless steel, 72 W x 28 H. 300 Series BGHWMB300 - Wall-mounted, 48 W x 28 H. BGHWMB300SS - Wall-mounted, stainless steel, 48 W x 28 H. BGHWMB302 - Wall-mounted, 60 W x 28 H. BGHWMB302SS - Wall-mounted, stainless steel, 60 W x 28 H. BGHWMB304 - Wall-mounted, 72 W x 28 H. BGHWMB304SS - Wall-mounted, stainless steel, 72 W x 28 H. 120 Series BGHWB120 - Open leg with lower shelf, 48 W x 28 H. BGHWB120SS - Open leg with lower shelf, stainless steel, 48 W x 28 H. BGHWB122 - Open leg with lower shelf, 60 W x 28 H. BGHWB122SS - Open leg with lower shelf, stainless steel, 60 W x 28 H. BGHWB124 - Open leg with lower shelf, 72 W x 28 H. BGHWB124SS - Open leg with lower shelf, stainless steel, 72 W x 28 H. BGHWB130SS Workbenches supplied by: Equipto 10-2 Closed Leg Workbenches Equipto closed leg benches combine high efficiency bench features with the important benefits of cabinet space. Rugged structured units designed for tough use. Knockouts in enclosed legs provide for safe, convenient electrical hookup. Roller suspension drawers. All legs are 34 high and all benches are 30 deep. EQG275U6 Bench Series Width Steel Top w/ Backstop 10-2 Steel Tops w/o Backstop Wood Tops w/ Hardwood Hardboard on Steel w/backstop Stainless Steel w/backstop Stainless Steel w/o backstop 275 4 EQG275U4 - EQG2754W EQG275U4M - - 275 5 - - - EQG275U5M EQG275U5SS - 275 6 EQG275U6 EQG275D6 EQG2756W - EQG275U6SS EQG275D6SS 275 8 EQG275U8 - - EQG275U8M - - 270 4 EQG270U4 - EQG2704W EQG270U4M - - 270 5 EQG270U5 - EQG2705W EQG270U5M - - 270 6 - - EQG2706W EQG270U6M - - 270 8 - - EQG2708W EQG270U8M - - FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture Workbenches supplied by: Equipto Pedestal Workbenches Equipto pedestal benches offer the perfect bench/cabinet combination and feature strong, rugged work surfaces, lower shelf space and lockable cabinets and drawers. Knockouts in legs provide safe, convenient electrical hookup. Roller suspension drawers. Door cabinets have middle shelf. All benches are 30 deep and all cabinets are 34 H x 15 W. Choice of steel or hardboard on steel tops with backstop. Width Steel Top Hardboard on Steel 4 EQG240U4 EQG240U4M 5 EQG240U5 EQG240U5M 6 EQG240U6 EQG240U6M 8 EQG240U8 EQG240U8M EQG240U6 2200 Series Open Leg Workbenches The Equipto 2200 Series open leg workbenches are a simple and convenient way to achieve efficient work space with economy and endurance. This basic unit is designed to remain strong and functional over years and years of demanding use. Knockouts in legs provide safe, convenient electrical hookup. Economical, strong, common leg for continuous row applications. Easy to anchor to floors. Available with steel tops with or without backstop, four lengths, 30 or 36 depths, and 34 height. EQG2223D5-5 W x 34 H x 30 D, steel top without backstop. EQG2223D6-6 W x 34 H x 30 D, steel top without backstop. EQG2223U4-4 W x 34 H x 30 D, steel top and backstop. EQG2223U6-6 W x 34 H x 30 D, steel top and backstop. EQG2223U8-8 W x 34 H x 30 D, steel top and backstop. EQG2233U4-4 W x 34 H x 36 D, steel top and backstop. EQG2233U5-5 W x 34 H x 36 D, steel top and backstop. EQG2233U8-8 W x 34 H x 36 D, steel top and backstop. EQG2223D6 2300 Series Open Leg Workbenches The Equipto 2300 Series open leg workbenches are as rugged as the basic open leg unit with the added feature of a spacious lower shelf. The 2300 Series provides superior strength, with built-in versatility for adapting, adding on, and custom building to match bench capability to your work needs. Exclusive universal mounting bracket simplifies mounting the bench to any wall. Knockouts in legs provide safe, convenient electrical hookup. Economical, strong common leg for continuous row applications. Available with steel tops with or without backstop, four lengths, 30 and 36 depths, and 34 height. EQG2323D5-5 W x 34 H x 30 D, steel top without backstop. EQG2323D6-6 W x 34 H x 30 D, steel top without backstop. EQG2323U4-4 W x 34 H x 30 D, steel top and backstop. EQG2323U5-5 W x 34 H x 30 D, steel top and backstop. EQG2323U6-6 W x 34 H x 30 D, steel top and backstop. EQG2323U8-8 W x 34 H x 30 D, steel top and backstop. EQG2333U4-4 W x 34 H x 36 D, steel top and backstop. EQG2333U5-5 W x 34 H x 36 D, steel top and backstop. EQG2333U6-6 W x 34 H x 36 D, steel top and backstop. EQG2333U8-8 W x 34 H x 36 D, steel top and backstop. EQG2323D6 10-3 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-3

Shop & Service Furniture Section 10 Workbenches supplied by: Equipto 2400 Series Open Leg Workbenches Carefully engineered for rugged use with three sides of the top enclosed and includes a bottom shelf. 2400 series workbenches are extremely versatile units. Completely modular, completely flexible - with variations to match any work area. Economical and strong for continuous row applications. Heavy gauge back stringer and welded legs provide rigid workcenter. Top of bench has an 1800 lb. capacity and all have steel tops with backstop. Available in 4, 5, 6 or 8 widths. EQG2421U6-6 W x 29 H x 30 D. EQG2423U4-4 W x 34 H x 30 D. EQG2423U5-5 W x 34 H x 30 D. EQG2423U6-6 W x 34 H x 30 D. EQG2423U8-8 W x 34 H x 30 D. EQG2423U5SS - 5 W x 34 H x 30 D, with stainless steel top. EQG2433U4-4 W x 34 H x 36 D. EQG2433U5-5 W x 34 H x 36 D. EQG2433U6-6 W x 34 H x 36 D. EQG2433U8-8 W x 34 H x 36 D. EQG2423U6SS - 6 W x 34 H x 30 D with stainless steel top. EQG2423U6 Teardown Workbenches Teardown workbenches help improve shop cleanliness by eliminating unsafe spills in the work area. Ideal for working on transmissions, small engines and hydraulic components. This versatile, portable teardown bench quickly helps prevent fluids from getting into work area. Top has a 3/4 high retaining lip on all sides tapering to the rear center to a 1/2 threaded and plumbed drain. 1/2 threaded drain nipple allows for connection of a hose to divert fluid to a storage container. Two heights and widths are available for comfortable and safe transfer of part from stand. EQG2311DT - Steel top, 60 W x 29 H x 30 D. EQG2313DT - Steel top, 60 W x 34 H x 30 D. EQG2311DTSS - Stainless steel top, 60 W x 29 H x 30 D. EQG2311DTSS 10-4 EQG434U6 - Iron-I Work Bench The Iron-I work bench has a steel top with backstop and includes a lower shelf. Adjusts from 34 to in 44 height. 6 W x 36 D. The top overhangs legs 1 on each side. EQG295 - Closed Leg Cabinet Bench This closed leg cabinet bench features double doors, chrome locking handle and two shelves. Ideal for small office copiers, postage meters, fax machines, etc. 36 W x 34 H x 26-3/8 D. 10-4 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture Workbenches supplied by: Lyon Workspace Products Portable Workbenches Lyon s roll-around workbenches provides bench space where you need it most. Various sizes to meet your needs. LYO2560 - Mobile workbench with steel top, 72 W x 34 H x 28 D. LYO2563 - Roll-around workbench, 60 W x 34-1/8 H x 28 D. LYO2564 - Roll-around workbench, 72 W x 34 H x 28 D. Bench Drawers Various bench drawers are available to fit all of your storage needs. LYO2788 - Bench drawer, set up, 15-3/4 W x 6-3/4 H x 20 D, 1 pack. LYO2788-4 - Bench drawer, set up, 15-3/4 W x 6-3/4 H x 20 D, 4 pack. LYO2789-4 - Bench drawer, set up, 21-3/4 W x 6-3/4 H x 20 D, 4 pack, only 2 attachment angles. LYO2790 - Bench drawer, set up, 15-3/4 W x 13-1/2 H x 20 D, 1 pack. LYO2794 - Perfect fit bench drawer, set up, 15-3/4 W x 13-1/2 H x 20 D, 1 pack. LYO2794 Workbenches with Stringer These versatile work benches will make a great addition to any work space. The heavy channel steel legs provide a sturdy base for a variety of bench work tasks. Steel cross members are welded between each upright leg to add strength and rigidity. These features will ensure a lifetime of use. 12 gauge steel, 1-3/4 thick tops. Perfect fit 9 bench drawers. Electrical knockouts on each leg offer location for duplex outputs. Base plates punched for floor bolts provide 24 square inch floor bearing surface per leg. LYO2468 - Workbench with stringer, steel top, 48 W x 34 H. LYO2502 - Workbench with stringer, 60 W x 28 H. LYO2503 - Workbench with stringer, 60 W x 34 H. LYO2504 - Workbench with stringer, 72 W x 28 H. LYO2505 - Workbench with stringer, 72 W x 34 H. LYO2522 - Workbench with stringer and shelf, 60 W x 28 H. LYO2523 - Workbench with stringer and shelf, 60 W x 34 H. LYO2524 - Workbench with stringer and shelf, 72 W x 28 H. LYO2525 - Workbench with stringer and shelf, 72 W x 34 H. LYO2474 - Workbench with stringer and shelf, 48 W x 28 H. Wall-Mounted Stationary Benches Steel top wall-mounted workbenches. LYO2502W - Wall-mounted bench, 60 W x 28 D. LYO2503W - Wall-mounted bench, 60 W x 34 D. LYO2504W - Wall-mounted bench, 72 W x 28 D. LYO2505W - Wall-mounted bench, 72 W x 34 D. 10-5 Cabinet Benches Securely store all of your work equipment in this heavy-duty cabinet bench. These durable pieces of work furniture provide adequate work space and convenient storage within its shelved cabinet. The heavy steel top allows mounts for small grinders, vises or office machines. Lockable storage area offers 12 sq. ft. of space with center shelf adjustable on 1-1/2 centers. Swinging doors feature 3-point locking device. Back and end stops, 2 high, are part of top, may be inverted if flat service is desired. LYO3000 - Cabinet bench, 36 W x 36 H x 24 D. LYO3001 - Mobile cabinet bench, includes 3-1/2 Dyna-Tred casters, 2 swivel footbrakes, 36 W x 36 H x 24 D. LYO2832 - Cabinet bench, steel top, 60 W x 34 H x 28 D. LYO2834 - Cabinet bench, steel top, 72 W x 34 H x 28 D. FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-5 LYO3001

Shop & Service Furniture Section 10 Workbenches supplied by: Shure Manufacturing Corporation Custom Stationary Workbenches Custom Series workbenches are equipped with a large storage area that can be provided as open with two sliding doors, or two sliding doors with two drawers. The 60 bench top is available in 2 work surfaces: painted steel and hardwood maple. Stainless steel over wood core work surfaces are also available. Engineered for durability and versatility. Powder coat paint finish-choose from 22 Shure signature colors. Dimensions: 60 W x 34 H x 24 D.\ Optional accessories include ShureGuard mats, locks, vises and tool boards. SHU811001 - Steel top, open. SHU811002 - Wood top, open. SHU811004 - Steel top, two sliding doors. SHU811005 - Wood top, two sliding doors. SHU811007 - Steel top, two drawers with doors. SHU811008 - Wood top, two drawers with doors. SHU811005 10-6 ShureShop Workbenches ShureShop workbenches combine heavy-duty steel construction with all-welded, adjustable height legs (29 H - 40 H) to increase strength and rigidity. Painted steel bench top. (Hardwood maple and stainless steel tops are also available). Two bench depths (29 & 34 ) and three widths (48, 60 & 72 ) are available. Portable benches include accessory kit (left and right ends stops, back stop and lower shelf) and heavy-duty swivel locking casters. Powder coat paint finish-choose from 22 Shure signature colors. Optional accessories include ShureGuard mats, drawers, tool boards, heavy duty vises and bench risers. Contact your program representative for information. SHU811062 - Portable, steel top, 48 W X 29 D. SHU811063 - Portable, steel top, 60 W X 29 D. SHU811064 - Portable, steel top, 72 W X 29 D. SHU811066 - Portable, steel top, 60 W X 34 D. SHU811086 - Wall-mount, steel top, 48 W X 29 D. SHU811087 - Wall-mount, steel top, 60 W X 29 D. SHU811090 - Wall-mount, steel top, 60 W X 34 D. SHU811039 - Stationary, steel top, 60 W x 29 D SHU811042 - Stationary, steel top, 60 W x 34 D SHU811043 - Stationary, steel top, 72 W x 34 D Portable Wall-Mount Stationary 10-6 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture Workbenches supplied by: Shure Manufacturing Corporation Custom Series Workbenches Custom Series configurations include portable or wall-mounted. Custom workbenches have many options available related to work surface, storage requirements, color and style so that you can create your own workbench to best suit your needs and your dealership s image. The large storage area can be provided as open, two sliding doors or two sliding doors and two drawers. The 60 bench top is available in 3 work surfaces, painted steel, hardwood maple or stainless steel over wood core. Portable dimensions: 60 W x 34 H x 24 D. Wall-mount dimensions: 60 W x 24 D. Optional accessories include ShureGuard mats, locks, vises and tool boards. Powder coat paint finish-choose from 22 Shure signature colors. SHU811010 - Portable, steel top, open. SHU811011 - Portable, wood top, open. SHU811013 - Portable, steel top, two sliding doors. SHU811014 - Portable, wood top, two sliding doors. SHU811016 - Portable, steel top, two drawers with doors. SHU811017 - Portable, wood top, two drawers with doors. SHU811018 - Portable, steel top, Two drawers with doors and optional stainless steel top and optional locks. SHU811019 - Wall-mount, steel top, open. SHU811020 - Wall-mount, wood top, open. SHU811022 - Wall-mount, steel top, two sliding doors. SHU811023 - Wall-mount, wood top, two sliding doors. SHU811025 - Wall-mount, steel top, two drawers with doors. SHU811026 - Wall-mount, wood top, two drawers with doors. SHU811016 ShureTech Portable Workbenches SHURETECH Bench Systems integrate tool and part storage with a large work surface and 400lb. drawer capacity. Combine SHURETECH benches to customize your desired bench length. Concealment skirt and four swivel casters on portable units. Benches can be combined to form a larger workstation. Stainless steel top cap (optional stainless steel backstop). Powder coat paint finish-choose from 22 Shure signature colors. SHUTS7091 - Series 4 ShureTech portable bench. 4 drawers - 43-1/2 W x 35-9/16 H x 28-1/8 D. SHUTS7092 - Series 5 ShureTech portable bench. 6 drawers - 58-5/8 W x 35-9/16 H x 28-1/8 D. SHUTS7093 - Series 6 ShureTech portable bench. 11 drawers - 70 W x 35-9/16 H x 28-1/8 D. 10-7 Shuretech Tops Shuretech stainless steel over wood core tops in three available sizes. SHU800203 - Series 4 top, 43-1/2 W x 1-5/32 H x 29 D. SHU800204 - Series 5 top, 58-5/8 W x 1-5/32 H x 29 D. SHU800205 - Series 6 top, 70 W x 1-5/32 H x 29 D. SHUTS7093 Shuretech Backstops Stainless steel backstop in three available sizes. SHU800119 - Shuretech Series 4 stainless steel backstop, 43-1/2 W SHU800120 - Shuretech Series 5 stainless steel backstop, 58-5/8 W SHU800121 - Shuretech Series 6 stainless steel backstop, 70 W. FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-7

Shop & Service Furniture Section 10 Workbenches supplied by: Shure Manufacturing Corporation SHU800086 - Realiti Workbench The Realiti Workbench contains a high quality stainless steel top and custom backstop with an attractive accent color decal available in 4 colors. Two large drawers and four swing-out doors provide quick and easy access to large storage area. Locks are standard. 60 W x 34 H x 24 D. Tear Down Benches Shure s versatile and heavy-duty Tear Down and Fluid Containment Benches ease the task of working with fluidsaturated components. These benches assist in eliminating unsafe spills involved with working on transmissions, small engines and hydraulic systems. A stainless steel top insert is also available. Heavy-duty reinforced steel top or stainless steel top with a 1/2 lip on all sides and an offset drain. Include all welded adjustable height legs and four heavy-duty swivel casters with brake. Oversized Tear Down Benches include a storage drawer and a 12 deep lower shelf is available. SHU800023 - Tear Down Bench with painted steel top, 48 W x 32 D x Adjustable Height (29 H - 40 H). SHU811100 - Tear Down Bench with stainless steel top upgrade, 48 W x 32 D x Adjustable Height (29 H - 40 H). SHU811098 - Oversized Tear Down Bench, 60 W x 32 D x Adjustable Height (29 H - 40 H). SHU811098 10-8 Trans Max Workbenches Trans Max benches offer a large 6 ft. sloped working surface and includes a full-length trough draining system with drain pipe, two stringers, four heavy-duty swivel casters on portable models and an optional 12 inch deep lower shelf. Stationary models are available as well as a stainless steel top insert. Trans Max benches offer a large 6 ft. sloped working surface and includes a full-length trough draining system with drain pipe. Specifications: 73-1/2 W x 34-1/4 D x Adjustable Height (29 H - 40 H). Storage drawer with optional lock is standard. Powder coat paint finish-choose from 22 Shure signature colors. SHU811101 - Trans Max bench - stationary. SHU811102 - Trans Max bench - portable. SHU800083 - Optional 12 deep lower shelf for Trans Max bench. SHU811102 10-8 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture WORKSTATIONS & Work Centers supplied by: Equipto Production Booster Production boosters can be used on any work bench. They offer hands off use for manuals and instruments, shelves that adjust to any angle, toward front or back, safely holds expensive test equipment and can triple work surface. EQG452T60 - Production Booster - 24 high unit for use with 5 bench. EQG452T72 - Production Booster - 24 high unit for use with 6 bench. EQG452T72 EQG387R-5T - 387 Series Workcenter This is the most flexible technical workcenter available. Designed ergonomically for the 21st century. 12 gauge steel, 5 work surface with one cabinet that contains one 3 high drawer, three 4-1/2 high drawers, and one 12 high hanging file drawer. Pedestal leg has UL approved fused electrical outlets. Includes bottom shelf and cabinet lock. EQG466P5 - Aerial Shelf Aerial shelf assembly workcenter accessories offer two riser supports, shelf and back panel. Plastic laminate top without electricity. 14 W x 5 H x 13-1/2 D. WORKSTATIONS & Work Centers supplied by: Harloff Company Mobile Technology Workstations PCs and service equipment are a huge investment, why risk damage. Harloff offers a variety of different workstations, several accessory options, and any available color or color combination at no extra charge, allowing you to choose the perfect match for your service bay. Rugged, high-quality steel. Electrostatic powder coated paint for durability, available in 13 colors. Universal monitor mount stabilizes CRT and LCD monitors. Arrives completely assembled. Made in the U.S.A. Keyboard tray. Printer shelf. HARA4810-28-1/2 W x 41-1/2 H x 23 D, 3 drawers and enclosed storage area. HARA4811-21 W x 51 H x 21 D, 2 drawers and enclosed storage area. HARA4812-29-3/4 W x 43-3/8 H x 22 D, 1 drawer and enclosed storage area. HARA4813-29-3/4 W x 43-3/8 H x 22 D, 1 drawer and open storage area. HARA4811 10-9 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-9

Shop & Service Furniture Section 10 WORKSTATIONS & Work Centers supplied by: Shure Manufacturing Corporation Hybrid Workstation Hybrid Systems are extremely versatile and can be customized in numerous configurations. The Hybrid System allows for increased under bench storage and is ideal for an existing or re-model facility. Choose between a 10 Hybrid (Double Bay) or a 5 Hybrid (Single Bay). Technology Center in center of upper storage area includes upper binder cabinets, 2 monitor enclosure with door and articulating keyboard stand with mousepad. Lower kick plate to prevent items from being stored under the bench. Heavy-duty painted steel bench top. Sliding doors with locks. Add-on inground lift control cabinets for clean integrated look. SHU822001-5 Hybrid System - stationary with lift control. SHU822002-5 Hybrid System - stationary without lift controls. SHU822003-10 Hybrid System - stationary with dual-end lift controls. SHU822004-10 Hybrid System - stationary without lift controls. SHU822003 SHU800085 - Realiti Work Center Realiti Workcenters include all the features of the workbench plus a stainless steel tool board with work order holder, 60 flip front locking upper storage cabinet with gas spring shocks, a slim fluorescent Technician Task Light to illuminate the work surface and free-standing uprights to secure the tool board and upper storage cabinet. Realiti Workcenter features two large drawers and four swing-out doors along with a powder coat paint finish and your choice of 22 Shure signature colors. 10-10 TC3 Sink Stations Shure s Technician Sink Stations are designed to match Shure s workbenches and are intended to be installed in the technician service / repair work area or restroom. Single, double or quadruple stations are available. Stationary or wall-mounted sink stations are available. Quick, efficient means to keep hands and customer s cars clean. Paper towel dispenser, soap dispenser, mirror and trash container hole are standard on deluxe models. Powder coat paint finish-choose from 22 Shure signature colors. SHU800026 - TC3 Stationary Single Sink Station 36 W x 24 D x 58-7/8 H. SHU800127 - TC3 Wall-Mount Single Deluxe Sink Station 36 W x 24 D x 58-7/8 H. SHU800116 - TC3 Wall-Mount Double Deluxe Sink Station 72 W x 24 D x 58-7/8 H. SHU800117 - TC3 Wall-Mount Quadruple Deluxe Sink Station 144 W x 24 D x 58-7/8 H. SHU800117 10-10 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture WORKSTATIONS & Work Centers supplied by: Shure Manufacturing Corporation TC3 Workbench System Customize your TC3 System! Shure s TC3 System (Technician Customer Care Center) integrates ALL of the essential workspace, storage, tools and equipment that a busy service technician needs to maximize their efficiency and productivity. Stationary, wall-mount, upper and lower units are available along with multiple configurations for your specific shop requirements. Concealed, retractable reels can be mounted inside workbench. In-ground lift power units can be mounted to workbench and concealed. Matching tool storage cabinets with full extension 400 lb. drawer capacity. Workstations available in single or double bay configuration. Upper storage cabinet with a centralized computer station. Powder coat paint finish-choose from 22 Shure signature colors. SHU791389 - TC3 6 Lower, one 5 cabinet with left overhang. SHU791387 - TC3 10 Lower, two 3 cabinets with left and right overhang. SHU791434 - TC3 10 Lower, two 5 cabinets, no overhang. SHU791446C - TC3 10 Lower, two 4 cabinets with center overhang. SHU791446E - TC3 10 Lower, two 4 cabinets with left and right overhang. SHU791442 - TC3 3 Upper binder cabinet. SHU791457 - TC3 4 Upper binder cabinet. SHU791443 - TC3 5 Upper binder cabinet SHU791405 - TC3 10 Upper storage, two 4 cabinets with 2 centralized monitor enclosure. SHU791406 - TC3 6 Upper storage, one 4 cabinet with 2 lefthand monitor enclosure. TC3 Modular Tool Storage Shure s TC3 System (Technician Customer Care Center) integrates ALL of the essential workspace, storage, tools and equipment that a busy service technician needs to maximize their efficiency and productivity. Stationary and wall-mount units are available along with multiple configurations for your specific shop requirements. Stationary or portable units with 4 swivel casters and a concealment skirt. Full extension drawer slides, 400 lb. drawer capacity. Stainless steel top cap, locks and drawer liners. Powder coat paint finish-choose from 22 Shure signature colors. SHUTS6835 - TC3 Tool Storage. 16 drawers - 58-5/8 W x 50-11/16 H x 28-1/8 D. SHUTS6860 - TC3 Tool Storage. 16 drawers, 1 full width top drawer - 58-5/8 W x 52-13/16 H x 28-1/8 D. SHUTS6864 - TC3 Tool Storage. 16 drawers, 1 full width top drawer - 46-3/4 W x 52-13/16 H x 28-1/8 D. SHUTS6880 - TC3 Tool Storage. 15 drawers - 58-5/8 W x 50-11/16 H x 28-1/8 D. 6 TC3 Workbench System and Modular Tool Storage Unit 10-11 10 TC3 Workbench System and Modular Tool Storage Units FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-11

Shop & Service Furniture Section 10 WORKSTATIONS & Work Centers supplied by: Shure Manufacturing Corporation SHURETECH Bench System Pre-Configured Workstations The SHURETECH Bench System integrates tool and parts storage for any shop environment. Various lengths are available to meet any shop s individual needs. Combine SHURETECH cabinets to customize your desired bench length, add upper binder cabinets and add additional matching shop equipment available from Shure. Stainless steel utility chase panels. Locks for upper storage cabinets, lower storage cabinets and tool cabinets. Note: Can be keyed alike upon request. Stainless steel over wood core bench top. Stainless steel utility chase panel. Technician task lights. Shureguard 1/4 rubber mat. Retractable door for 2 monitor enclosure. Single Bay 8 Workstation SHUSTSS1 - Single Bay 8 Workstation. Components: (2) 3 upper binder cabinets, (1) 2 monitor enclosure, (1) 58-5/16 W tool cabinet, (1) 36 W storage cabinet. SHUSTSS2 - Single Bay 8 Workstation. Components: (2) 3 upper binder cabinets, (1) 2 monitor enclosure, (2) 36 W storage cabinets, (1) 24 W storage cabinet. SHUSTSS3 - Single Bay 8 Workstation. Components: (2) 3 upper binder cabinets, (1) 2 monitor enclosure, (2) 45-3/4 W tool cabinets. SHUSTSS4 - Single Bay 8 Workstation. Components: (2) 3 upper binder cabinets, (1) 2 monitor enclosure, (1) 45-3/4 W tool cabinet, (1) 24 W storage cabinet, (1) 24 W trash cabinet. SHUSTSS5 - Single Bay 8 Workstation. Components: (2) 3 upper binder cabinets, (1) 2 monitor enclosure, (1) 23 W tool cabinet, (1) 36 W storage cabinet, (1) 24 W reel cabinet, (1) 12 W lift power unit. SHUSTSS6 - Single Bay 8 Workstation. Components: (2) 3 upper binder cabinets, (1) 2 monitor enclosure, (1) 23 W tool cabinet, (1) 36 W storage cabinet, (1) 24 W cart locker, (1) 12 W lift power unit concealment cabinet. SHUSTSS5 SHUSTSD8 10-12 Double Bay 16 Workstation SHUSTSD1 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 58-5/16 W tool cabinets, (2) 36 W storage cabinets. SHUSTSD2 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 58-5/16 W tool cabinets, (2) 24 W storage cabinets, (1) 24 W trash cabinet. SHUSTSD3 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 23 W tool cabinets, (2) 36 W storage cabinets, (2) 24 W reel cabinets, (2) 12 W lift power unit concealment cabinets. SHUSTSD4 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 23 W tool cabinets, (2) 36 W storage cabinets, (2) 24 W cart lockers, (2) 12 W lift power unit concealment cabinets. SHUSTSD5 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (1) 52 W tool cabinet, (6) 23 W tool cabinets. SHUSTSD6 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (4) 36 W storage cabinets, (2) 24 W storage cabinets. SHUSTSD7 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 29-1/4 W tool cabinets, (2) 48 W storage cabinets (1) 36 W sink cabinet. SHUSTSD8 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 29-1/4 W tool cabinets, (2) 30 W storage cabinets (2) 36 W reel cabinets. SHUSTSD9 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (1) 58-5/16 W tool cabinet, (2) 29-1/4 W tool cabinets (2) 36 W storage cabinets. SHUSTSD10 - Double Bay 16 Workstation. (1) 2 monitor enclosure, (2) 23 W tool cabinets, (2) 24 W cart lockers, (2) 24 W reel cabinets, (1) 24 W trash cabinet, (2) 12 W lift power unit concealment cabinets. 10-12 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture WORKSTATIONS & Work Centers supplied by: Snap-on build-a-bay Build-a-Bay Custom Storage Solutions Build-a-Bay by Snap-on is an innovative custom-designed concept for your service department. By taking the service area to a new level, Build-a-Bay helps build your brand. It increases customer confidence and builds employee loyalty and organizational pride and profit. Build-a-Bay is a way of making sure every new customer becomes a repeat customer. Build-a-Bay does more than simply organize things. It helps build the organization. It helps define and brand who you are to your customers and to your employees. Build-a-Bay identifies you as being a professional shop, with all its pieces in place. It s good for morale. It s good for customer relations. It s good for productivity and your bottom line. It s good for the whole organization. Benefits Improve CSI. Increase productivity. Improve technician recruiting/retention. Custom design for your service area. More than 30 colors available to meet your OE requirements. Incorporate in-bay lift controls and fluid inventory controls. Tool storage boxes and workbench cabinets can all be keyed alike. Freestanding unit designed to hide electrical, plumbing and other unsightly issues. Docker Locker Tool Storage System with technician roll cart in both full-size and under-counter models. Workbenches from 18" - 144" wide. Extra deep stainless steel top available. Custom back splash available with electrical outlets and data ports. Separate computer station units available. 10-13 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-13

Shop & Service Furniture Section 10 Wall-Mounted Cabinets supplied by: Borroughs Corporation Wall-Mounted Storage Cabinets Borroughs Wall-Mounted Storage Cabinet with optional angle top mounts conveniently over tech bench and features a key lock for security and adjustable center shelf. 36 W x 27 H x 13 D with swing doors. BGH11114000 - Wall-mounted storage cabinet. BGH11125000 - Angled top kit. BGH11114-000 & BGH11125-000 Shown Together Wall-Mounted Cabinets supplied by: Lyon Workspace Products LYO3020 - Hanging Cabinet When floor space is at a premium, this hanging cabinet is a perfect choice for your workspace. This cabinet is perfect for keeping tools or supplies within reach. Sides and back punched every inch for two 1/2 pegs, 2-point latching device with padlock attachment (padlock not included), shelf, socket tray, and 18 pegs included. Dimensions: 24 W x 35 H x 12 D. Wall-Mounted Cabinets supplied by: Shure Manufacturing Corporation 10-14 SHU800030 - Wall-Mounted Cabinet Shure s sliding door cabinets have two sliding doors and can be wall-mounted or upright that mounts to a workbench system. Powder coat paint finish-choose from 22 Shure signature colors 48 W x 30 H x 15 D. Shop/SERVICE Desks supplied by: Borroughs Corporation BGH14804-000 Service Writer Desk Borroughs Service Writer Desk features a sloping top, compartmentalized ledge, and a large enclosed storage area with front hinged door under hinged writing surface. 33 W x 40 H x 30 D 10-14 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture Shop/SERVICE Desks supplied by: Harloff Company Service Advisor Podium Desk Harloff Service Write-up Desk line manages the interface between customer and service professionals in a cleanly designed, attractive mobile package. Printouts and other documents can be organized and displayed, while computer equipment is arranged out of sight. Accommodates a PC, monitor and printer all in one versatile, sturdy, mobile desk. Professional presentation to better serve your customers. Steel construction available in 13 powder coat paints. Standing style podium with full wrap-around laminate top, optimizes customer working area. Writing area has matching laminate and rounded front edge for smooth work surface. Full counter top for flat screen monitor. Keyboard tray with premium quality ball-bearing drawer slides. Ships completely assembled. HARP4944-44 W x 29 D x 46-1/2 H. HARP4944SA - 44 W x 29 D x 46-1/2 H. HARP4945-44 W x 29 D x 46-1/2 H. HARP4945SA - 44 W x 29 D x 46-1/2 H. HARP4944 Shop/SERVICE Desks supplied by: Lyon Workspace Products Lyon Shop Desks These rugged steel shop desks are built for years of industrial service. They are constructed of heavy gauge steel tops, slides and legs. Sloping work surface. Convenient storage compartments. Adjustable bottom shelf on all except wall desk. LYO2250 - Shop desk, 34-1/2 W x 53 H x 30 D. LYO2251 - Rugged steel cabinet desk, chrome plated handle with built in three point locking device, 34-1/2 W x 53 H x 30 D. LYO2253 - Wall desk, attaches to any wall space, building column or shelving rack end, 24-1/2 W x 12 H x 23 D. LYO2254 - Mobile shop desk, outfitted with 2-1/2 casters for added mobility, 34-1/2 W x 56 H x 30 D. LYO2251 10-15 Modular Shop Desks The heavy-duty construction throughout and hasps on drawers that accept padlocks ensure that your workspace is both durable and secure. These rugged steel shop desks are built for years of industrial service. Four compartment risers for work surface organization. Base and end support assembly. Dimensions: 33 W x 53 H x 20 D. LYO2255 - Four drawer modular shop desk - two low profile drawers and two double height drawers. LYO2257 - Four drawer modular shop desk - one low profile drawer and three double height drawers. LYO2258 - Five drawer modular shop desk - one low profile, one double height and three perfect fit drawers. LYO2259 - Three drawer modular cabinet/shop desk - three low profile drawers. LYO2258 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-15

Shop & Service Furniture Section 10 Shop/SERVICE Desks supplied by: Shure Manufacturing Corporation SHU510202 - Advisory Information Module (AIM) The AIM unit offers an inset countertop for a computer monitor and a lower shelf for the hardware and printer. The AIM unit is portable with locking casters. Deluxe utility stools (SHU610049) and keyboard mounting unit (SHU900595) are also available. Dual level writing surfaces (48 and 38 ) and lower inside storage shelf and powder coat paint finish-choose from 22 Shure signature colors. 42 W x 27 D x 48-1/2 H overall. SHU800016 - Transaction Service Cabinet Customer service oriented cabinet. An entire PC system can be contained in this unit. Includes shelves for storing supplies and components. Doors swing open to provide access to internal compartment. Powder coat paint finish-choose from 22 Shure signature colors. 48 W x 33 D x 38-7/8 H. chairs & Stools supplied by: Dell Corning Corporation 10-16 Counter Stools A sturdy attractive stool, the height is just right for comfortable counter work and the extra-wide base provides plenty of support. Heavy plated tubular steel construction and rubber feet will take years of rough use. Ring type foot rest adds strength and support. Full 360 degrees pivoting seat eliminates torque and stress on legs and prolongs life of unit. Available with or without back. Tough vinyl. Extra wide base. Sturdy foot rest. DLC80108 - Counter stool with back. DLC80107 - Counter stool no back. DLC80109 - Replacement cushion. DLC80108 CHAIRS & StoolS supplied by: Equipto EQG1426-05 - Stool Steel seat, 26 high, with rubber feet that eliminates noise and slippage. 10-16 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651

Shop & Service Furniture chairs & Stools supplied by: Lyon Workspace Products LYO2026 - Multi-Function Industrial Chair Multi-Function Industrial Chair with extra large contoured seat features a new 19 W x 17-1/2 D self-skinning foam seat, large padded backrest 15-1/2 W x 12-1/2 H and a three level footrest. LYO2092 - Sit Stand Increase the productivity of workers who are on their feet all day. This sit stand stool is an ergonomically designed support device that allows the user to work in an upright, standing position while most of their weight rests on the padded seat. Seat swivels 16 degrees in either direction, automatically centers, tilts forward up to 20 degrees and height is adjustable from 22-3/4 to 32-3/4. chairs & Stools supplied by: Shure Manufacturing Corporation SHU610049 - Deluxe Utility Stool Designed to maximize basic industrial ergonomic requirements, the Deluxe Utility Stool features a simple height adjustable seat and backrest on a durable gas cylinder. The polyurethane foam seat and backrest promote air circulating comfort and withstands light acids. 10-17 FOR MORE INFO OR TO ORDER CALL: 1-800-368-6787 / FAX: 1-800-892-9651 10-17