PACK TRAVEL INSTRUCTION MANUAL Specially designed for deaf and hearing impaired people.
All your products are already connected to each other. 2
Summary : 3 : The contents of your package 4-12 : Alarm Clock 13-14 : Doorbell SP14 3
The contents of your package A B D 4 C E A - Alarm Clock B - Doorbell C - Travel Kit D - Metal bracket E - 1 USB connection port F - Manual instruction in english F
Alarm Clock Q N R O S P T X W U V N - Time alarm switched on T - Date O - Doorbell alarm switched on U - USB connection port P - Snooze function activated V - Micro USB connection port Q - Battery level W - Cushion attachment cord R - Time X - Micro USB charger port S - Weekday 5
M E D F C A B L G K J 6 H I A - Power ON/OFF G - Changing time / date button B - ON/OFF alarme button H - Changing time / date button C - ON/OFF sound alarme button I - Settings button D - FL: flash only LO: flash + vibrator HI: flash + loud vibrator J - Alarm setting button K - Alarm setting time E - ON/OFF button doorbell alarm L - Plug button F - Language (EN: english / FR: french) M - Snooze button to delay the alarm for 10 minutes
Technical Specifications Wireless Rechargeable battery Works with a lithium battery (included) Weight : 132g Distance : 150 meters maximum in free fields Radio frequency : 433 Mhz Dimensions (height x width x depth) : 8,5 x 11 x 2,5 cm Autonomy : 2 weeks (depending of the use) Mounting kit supplied Installation and configuration EASY 2 years guarantee (battery 1 year) Working principle The vibrating alarm clock can function on its own or with the Jenile doorbell. Instead of an alarm ring and/ or doorbell ring, it emits flashes and/or vibrations. 7
Use Thanks to the alarm clock, you receive the signal from the Jenile doorbell. The Jenile alarm clock includes a rechargeable battery. The picture of a battery in the top right of the screen indicates its charge level : Low battery : you need to recharge the cube blue LED : battery is in charge No LED lightened up : the charge is complete Green LED & flashing : Someone rang at the door 8
Green LED & vibrating : Someone rang at the door M When you have seen your alarm clock snap you must press the snooze button (M) on your alarm clock to stop it If the green LED is blinking it is to warn you that someone rang. the green LED will continue flashing until the next doorbell to indicate that someone previously rang the doorbell. Alarm flash without green LED : It s time to wake up! Alarme vibrates without green LED: it s time to wake up! 9
Tests The alarm clock is easy to test. If the alarm clock does not work in accordance with the instructions below, we invite you to contact your seller. To test your alarm clock, set the power button to ON to turn it on, then check that your alarm button is ON as well as the button "doorbell". When the buttons are well positioned, please press on the doorbell jenile 10
If the alarm clock does not light up, please check that the battery is not empty and by putting your alarm clock in charge : V X U Insert the V port of your cable on a USB support Insert the U port of your cable in the (X) plug of your device Settings CAUTION: Your products have already been connected to each other, no manipulation is necessary. But if you want to redo the connection here are the instructions to follow 11
Settings 1. Time / Date settings : Press K. «Time» starts to flash. Press on the I button to settle in 24 hours (French time) or 12 hours (English time) use G and H to change time then press K. K I H G Press on the I button twice. Use G and H buttons to change time. Press on the I button to adjust the minutes, then the date. Always use the G and H buttons to change the settings. 2. Alarm clock settings: Press on the J button. Alarm (N) starts to flash. Press on the I button. Use G and H buttons to change time. N Press on the I button to adjust the minutes. You can register up to 5 different alarm rings. T Press on the I button to switch on the next alarm ring. The number which appears under MONTH (T) indicates the number of alarm rings. J 12 I H G Press on the I button to adjust the minutes, then the date. Always use the G and H buttons to change the settings.
3. Synchronization of the alarm clock with the doorbell: Switch on the E button doorbell to ON. With a toothpick, press down the L button, a red light on the front side will light up. Immediately press on the doorbell, the red button flashes: you succeeded to connect your alarm clock to the doorbell. E L Make a test; your alarm clock flashes in every color and a small green LED indicates that it has been triggered by the doorbell. Press snooze (M) to stop the alarm. If you don t, the green LED will continue flashing until the next doorbell to indicate that someone previously rang the doorbell. The number which appears under MONTH (T) indicates the number of alarm rings. 13
Doorbell SP14 A B C A B - Doorbell - Bracket fixing C - Battery 23A 12V Technical Specifications Dimensions (height x width x depth) : 53x34x20mm Color : white Weight : 20g Power supply : battery included 23A 12V Autonomy : 1 year Transmission frequency : 433,33 Mhz 2 years guarantee Installation fixed This button is fixed to the wall near the door, with screws and (B). 14
Working principle A signal system is composed of at least one transmitter and one receiver. When a person presses the bell button, the signal is converted into radio-frequency pulses. Those radio-frequency pulses (433 Mhz) are transmitted wireless to the flash receivers or to the Jenile vibrators. Then, they flash/vibrate in green. Use Whether your doorbell works correctly, you can see a red LED will light up when you press the doorbell. If this is not the case, it means that no more battery, so you must change (C) C - Battery 23A 12V Settings Your products are already connected to each other. If this is not the case, the connection is very simple, please look at the setting of the cube flash & Pocket vibrator.... Safety and care Respect all the using and care instructions. To clean the alarm clock, only use a soft and slightly damp cloth. Do not use any corrosive or abrasive cleaning agents. Do not bring it in contact with any liquid. 15
www.jenile.com