CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05 Expected action: INFO Background: Committee URL: http://cen.iso.org/livelink/livelink/open/centc207
CEN/TC 207 Doc. N. 1646 CEN/TC 207 Updated work programme May 2016 WORK ITEM pren-wg Alerts TITLE TC COMMENTS 3 year timeframe next step TD 00207175 - pren 1335-1rev. PRE-WI WG3 Office furniture - Office work chair - Part 1: Dimensions - Determination of dimensions Revision decided during the Plenary meeting of May 2005. The revision will consider ISO/TR 24496. WI Activation A group established by WG 3 will evaluate the anthropometric data sent by every country in order to find what are the essential dimensions to be considered. CEN/TR 1335-4 should be part of the revision. 00207196 FprEN 527-2Rev. WG 3 Office furniture - Work tables and desks - Part 2: Mechanical safety requirements Formal Vote will start on: 2016-07-21 TD: 2016-09-21 When published the standard will withdraw also EN 527-3 00207197 pren 527-3Rev. PRE-WI WG 3 Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure EN 527-3 should be withdrawn once the revision of EN 527-2 will be published. PRE-WI to be deleted. 00207219 pren 581-1rev. WG 4 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements CEN Enquiry closed on: 2015-10-11 TC 207 Decision to submit FprEN 581-1 to Formal Vote received 4 negative Formal Vote 2016-08-31
CEN/TC 207 Doc. N. 1646 votes. A final decision will be taken at the next plenary meeting 00207222 PRE-WI Children s and Nursery Furniture - Tables - Requirements and Test Methods Resolution N. 492 (Doc. CEN/TC 207/N 1147, 1148 and 1163) WI Activation 00207223 PRE-WI Children s and Nursery Furniture - Seating - Requirements and Test Methods Resolution N. 493 (Doc. CEN/TC 207/N 1149, 1150 and 1164) WI Activation 00207224 pren 16890 Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods CEN Enquiry closed on: 2015-10-02 2016-08-31 00207231 pren 1022rev WG 9 Domestic furniture Seating Determination of stability CEN Enquiry closed on: 2016-01-22 pren 1022rev. was not approved due to 6 negative votes 2017-03-16 00207232 FprEN 12727rev WG 5 Furniture - Ranked seating requirements for safety, strength and durability Formal Vote will start on: 2016-06-30 TD: 2016-08-30 00207233 FprEN 15372rev WG 5 Furniture - Strength, durability and safety - Requirements for non-domestic tables Formal Vote will start on: 2016-07-07 TD: 2016-09-07 00207240 pren 16955 WG 8 00207241 PRE-WI pren 13150rev WG 6 Hardware for furniture - Tapered pressure tubes for selfsupporting gas springs for the height adjustment of seating - Test methods and requirements for strength and durability Workbenches for laboratories - Dimensions, safety requirements and test methods CEN Enquiry closed on: 2016-04-14 TC 207 Secretariat circulated a CALL FOR EXPERTS 2017-10-24 00207242 PRE-WI pren 14727rev Laboratory furniture - Storage units for laboratories - Requirements and test methods The Standard should be withdraw after the modification of the scope of EN
WG 6 CEN/TC 207 Doc. N. 1646 16121 in order to "include" laboratory storage 00207245 FprEN 581-3rev WG 4 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Safety, strength and durability requirements for tables Formal Vote will start on: 2016-07-07 TD: 2016-09-07 00207247 PRE-WI pren 1130-1rev Children's and Nursery Furniture - Cribs, cradles and suspended baby beds - Part 1: Safety requirements 00207250 pren 1116rev WG 1 Kitchen furniture - Co-ordinating sizes for kitchen furniture and kitchen appliances Sent to CEN on 2016-05-04 for the submission to CEN Enquiry. 2018-05-09 00207256 FprEN 716-1rev Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements UAP Failed. Possible next steps: - 2 nd UAP - Formal Vote - CEN Enquiry + Formal Vote 2016-07-21 9 months tolerance should be requested Alert Information The negative result of a Formal Vote or UAP has been made available more than 3 months ago and a revised draft is not yet available for submission to an adoption procedure. Possible actions: TC shall make a revised draft available to CCMC (via e-trans) by 2016-07-21 or the item will be automatically deleted.
00207257 FprEN 716-2rev 00207258 pren 15939rev WG 8 00207260 - PRE-WI WG 4 00207261 PRE-WI pren 1725rev WG 1 Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods Hardware for furniture Strength and loading capacity of wall attachment devices Outdoor furniture - Seating for camping, domestic and contract use - Specific requirement concerning behaviour at high temperature Domestic furniture - Beds and mattresses - Safety requirements and test methods CEN/TC 207 Doc. N. 1646 (Delay requested: see Decision N 637) CEN Enquiry closed on: 2016-01-29 2017-02-15 00207262 pren 1335-2rev WG 3 Office furniture - Office work chair - Part 2: Safety requirements Secretariat is preparing the draft for the submission to CEN Enquiry Draft for CEN Enquiry: 2017-04-21 00207266 PRE-WI pren 15706rev WG 8 Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts 00207267 PRE-WI WG 7 Visual assessment of furniture surfaces = Alert 4 (The Work item shall respect the timing defined by the 3-year timeframe)
ONGOING TC 207 DECISIONS CEN/TC 207 Doc. N. 1646 Reference Opening date Closing date Title ADDITIONAL INFORMATION CEN/TC 252 00252082 EN 12221-1:2008+A1:2013 00252083 EN 12221-2:2008+A1:2013 Child use and care articles - Changing units for domestic use Part 1: Safety requirements Child use and care articles - Changing units for domestic use Part 2: Test methods PUBLISHED PUBLISHED PUBLISHED STANDARDS CEN/PC 364 (former BT/TF 144) "High chairs" - PUBLISHED STANDARDS 2012 EN 14988-1:2006+A1:2012 Children's high chairs Part 1: Safety requirements EN 14988-2:2006+A1:2012 Children's high chairs Part 2: Test methods Current Work programme (00364007) pren 14988 Children's high chairs Safety requirements and test methods will be submitted to 2 nd CEN Enquiry on 2016-06-09 CEN/TC 207 - PUBLISHED STANDARDS 2003/2013 EN 527-3:2003 EN 14072:2003 ENV 14443:2004 CEN/TR 14073-1:2004 CEN/TR 14699:2004 EN 1116:2004 EN 13453-1:2004 Office furniture Work tables and desks Part 3: Physical and mechanical characteristics of the structure Test methods Glass in furniture Test methods Domestic furniture - Seating - Test methods for the determination of durability of upholstery - WITHDRAWN Office furniture Storage furniture Part 1: Dimensions Office furniture Technical report on terminology for office furniture Kitchen furniture Co-ordinating sizes for kitchen furniture and kitchen appliances Furniture - Bunk beds and high beds for non domestic use - Part 1: Safety, strength and durability requirements
EN 13453-2:2004 EN 14073-2:2004 EN 14073-3:2004 EN 14074:2004 EN 13721:2004 EN 13722:2004 EN 14434:2004 EN 1022:2005 EN 14749:2005 CEN/TS 15185:2005 CEN/TS 15186:2005 CEN/TR 581-4:2005 EN 14727:2005 EN 1021-1:2006 EN 1021-2:2006 EN 581-1:2006 CEN/TR 15349:2006 EN 1729-1:2006 EN 1729-2:2006 EN 15187:2006 EN 15338:2007 CEN/TR 15588:2007 EN 14703:2007 EN 747-1:2007 EN 747-2:2007 EN 15373:2007 EN 581-3:2007 CEN/TR 15709:2008 EN 716-1:2008 EN 716-2:2008 EN 15372:2008 EN 15570:2008 EN 14434:2004/AC:2008 EN 581-2:2009 EN 1335-2:2009 EN 1335-3:2009 EN 15706:2009 EN 12720:2009 EN 12721:2009 EN 12722:2009 EN 12521:2009 CEN/TR 1335-4:2009 EN 1335-3:2009/AC:2009 EN 14434:2010 EN 15338:2007+A1:2010 CEN/TC 207 Doc. N. 1646 Furniture - Bunk beds and high beds for non domestic use - Part 2: Test methods Office furniture - Storage furniture - Part 2: Safety requirements Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts Furniture - Measurement of the surface reflectance Furniture - Assessment of the surface gloss Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods Domestic furniture Seating Determination of stability Domestic and kitchen storage units and worktops Safety requirements and test methods Furniture - Assessment of the surface resistance to abrasion Furniture - Assessment of the surface resistance to scratching Outdoor furniture - Seating and tables for camping, domestic and contract use Part 4: Requirements and test methods for durability under the influence of climatic conditions Laboratory furniture - Storage units for laboratories - Requirements and test methods Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source: Smouldering cigarette Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source: Match flame equivalent Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements Hardware for furniture Terms for extension elements and their components Chairs and Tables for educational institutions - Part 1: Functional dimensions Chairs and Tables for educational institutions - Part 2: Safety requirements and test methods Furniture Assessment of the effect of light exposure Hardware for furniture - Strength and durability of extension elements and their components Hardware for furniture - Terms for hinges and their components Furniture - Links for non-domestic seating linked together in a row - Strength requirements and test methods Furniture - Bunk beds and high beds for domestic use - Part 1: Safety, strength and durability requirements Furniture - Bunk beds and high beds for domestic use - Part 2: Test methods Furniture - Strength, durability and safety - Requirements for non-domestic seating Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Mechanical safety requirements and test methods for tables Hardware for furniture - Terms for slide fittings for sliding doors and roll fronts Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods Furniture Strength, durability and safety Requirements for non-domestic tables Hardware for furniture Strength and durability of hinges and their components Hinges pivoting on a vertical axis Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating Office furniture - Office work chair - Part 2: Safety requirements Office furniture - Office work chair - Part 3: Test methods Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts Furniture - Assessment of surface resistance to cold liquids Furniture - Assessment of surface resistance to wet heat Furniture - Assessment of surface resistance to dry heat Furniture - Strength, durability and safety - Requirements for domestic tables Office furniture Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions) Office furniture - Office work chair - Part 3: Test methods Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods Hardware for furniture - Strength and durability of extension elements and their components
CEN/TC 207 Doc. N. 1646 CEN/TR 16015:2010 Hardware for furniture - Terms for locking mechanisms EN 12520:2010 Furniture - Strength, durability and safety - Requirements for domestic seating EN 12227:2010 Playpens for domestic use Safety requirements and test methods EN 15828:2010 Hardware for furniture Strength and durability of hinges and their components Stays and hinges pivoting on a horizontal axis EN 15185:2011 Furniture - Assessment of the surface resistance to abrasion EN 527-1:2011 Office furniture - Work tables and desks - Part 1: Dimensions EN 16014:2011 Hardware for furniture - Strength and durability of locking mechanisms CEN/TS 16209:2011 Furniture - Classification for properties for furniture surfaces EN 15939:2011 Hardware for furniture - Strength and loading capacity of wall attachment devices EN 1729-2:2012 Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods EN 747-1:2012 Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements EN 747-2:2012 Furniture - Bunk beds and high beds - Part 2: Test methods EN 13759:2012 Furniture - Operating mechanisms for seating and sofa-beds - Test methods EN 15186:2012 Furniture - Assessment of the surface resistance to scratching EN 1728:2012 Furniture Seating Test methods for the determination of strength and durability EN 16122:2012 Non-domestic storage furniture Test methods for the determination of strength, durability and stability EN 1730:2012 Furniture Tables Test methods for the determination of strength, durability and stability EN 1957:2012 Domestic furniture - Beds and mattresses - Test methods for the determination of functional characteristics EN 16139:2013 Non-domestic storage furniture Requirements for the safety, strength, durability and stability EN 716-1:2008+A1:2013 Furniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements EN 716-2:2008+A1:2013 Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods EN 16337:2013 Hardware for furniture - Strength and loading capacity of shelf supports EN 16121:2013 Non-domestic storage furniture Requirements for the safety, strength, durability and stability EN 12720:2009+A1:2013 Furniture - Assessment of surface resistance to cold liquids EN 12721:2009+A1:2013 Furniture - Assessment of surface resistance to wet heat EN 12722:2009+A1:2013 Furniture - Assessment of surface resistance to dry heat EN 15939:2011+A1:2014 Hardware for furniture - Strength and loading capacity of wall attachment devices EN 1021-1:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette EN 1021-2:2014 Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent CEN/TS 16611:2014 Furniture Assessment of the surface resistance to microscratching EN 747-1:2012+A1:2015 Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements (will be published on 2015-05-27) EN 747-2:2012+A1:2015 Furniture Bunk beds and high beds Part 2: Test methods (will be published on 2015-05-27) EN 1729-1:2015 Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions EN 1729-2:2012+A1:2015 Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods EN 597-1:2015 Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 1: Ignition source smouldering cigarette EN 597-2:2015 Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 2: Ignition source: match flame equivalent EN 581-2:2015 Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating EN 12520:2015 Furniture - Strength, durability and safety - Requirements for domestic seating EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables EN 14749:2016 Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods CEN/TS 16612rev:2016 Furniture - Assessment of the surface resistance to microscratching
CEN/TC 207 Doc. N. 1646 NUMBERS 93 In the last 14 years (UNI secretariat) CEN/TC 207 published 93 standards. 11/13 At the moment there are 11 active work items and 13 pre-adopted WIs in TC 207 Work Programme. 3 3 projects currently submitted to FV procedure