1st March 2005 Issue 1 Declaration of conformity maintenance record No Revised date Contents Reasons Approval 1 2 3 4 5 6 7 8 9 10 Security Systems Division Matsushita Electric Industrial Co., Ltd. Yokohama Kanagawa 223 Japan
1st March 2005 Issue 1 T05-PSSD-A228-1 Part Technical Construction Document of Colour CCTV Camera Panasonic WV-CP480/G WV-CP484E WV-CP480/CH Prepared / Issued on 1st March 2005 The products comply with the essential safety and health requirement of EC council Directive 73/23/EEC as amended by 93/68/EEC, and 89/336/EEC as amended by 93/68/EEC Approved and Signed by: Signature : Printed : M. Tanaka Title : Group Manager Engineering Admini Group Security Systems Division Matsushita Electric Industrial Co., Ltd. Yokohama Kanagawa 223 Japan
1st March 2005 Issue 1 Technical Construction Document maintenance record No Revised date Contents Reasons Approval 1 2 3 4 5 6 7 8 9 10 Security Systems Division Matsushita Electric Industrial Co., Ltd. Yokohama Kanagawa 223 Japan
1st March 2005 Issue 1 Technical Construction Document Part Product identification & Description 1. Name of Product : Colour CCTV Camera, Commercial 2. Trade name : Panasonic 3. Model number 1. Basic model : WV-CP480/G 2. Similar model : WV-CP484E : WV-CP480/CH : Description of Differences Similar model Differ from Basic model WV-CP484E AC24V used instead of AC mains as power source. WV-CP480/CH Power supply cord plug is differ for China market. 4. Product Certification : EMC TUV Rheinland Japan Certificate number : Panasonic Mobile Communication Engineering (TUV subcontractor) Reference number : MYS-0401101 Safety (AC Adaptor) Products safety design is checked by TUV in German. Reference number : 500491 5. Rating (Basic model) 1. Power : main operated 2. Voltage : 220-240V 3. Frequency : 50Hz 4. Consumption : 4.6 W
6. General Appearance and name plate: CE Mark is printed in the name plate. Basic model Panasonic Panasonic Colour CCTV Camera Colour CCTV Camera Model No. WV-CP480/G Model No. WV-CP484E POWER 220-240V 50Hz 4.6W POWER 24V 50Hz 4.7W Matsushita Electric Industrial Co., Ltd. 12V==420mA Matsushita Electric Industrial Co., Ltd. Made in Japan Made in Japan Panasonic Colour CCTV Camera Model No. WV-CP480/CH POWER 220-240V 50Hz 4.6W??? Dimensions (without lens) WV-CP480/G 70 (W) x 65 (H) x 129 mm (D) WV-CP480/CH 70 (W) x 65 (H) x 129 mm (D) WV-CP484E 67 (W) x 65 (H) x 100 mm (D) Weight: WV-CP480/G 520 g (Without power cord) WV-CP480/CH 520 g (Without power cord) WV-CP484E 400 g 7. Places of manufacturer Places of manufacturer Matsushita Electric Industrial Co., Ltd. Global Factory Center 600 Saedo Tsuzuki-ku, Yokohama Japan ISO9001 registered firm. Places of manufacturer Panasonic System Solutions Suzhou Co., Ltd. 1428, Binhe Road, New District Suzhou, Jiangsu, China ISO9002 registered firm. Models produced WV-CP480/G, WV-CP484E Models produced WV-CP480/CH 8. Safety Precautions 1. These products designed for commercial and similar use. 2. Instructions for safe use details: refer to the attached sheet, which are integral parts of operating and installation manuals accompanied with each products. 3. CAUTION-to reduce the risk of electric shock, do not remove cover, no user-serviceable parts inside. Refer servicing to qualified service personnel. 4. WARNING-to prevent fire or shock hazard, do not expose this appliance to rain or moisture. 5. WARNING-this apparatus must be earthed. 6. IMPORTANT-the wire in this mains lead are coloured in accordance with the following code. Green-and yellow : Earth Blue : Neutral Brown : Live
1st March 2005 Issue 1 Technical Construction document Part Conformity assessment Product: Colour CCTV Camera Trade Name: Panasonic Model No. Part -1 : WV-CP480/G Part -2 : WV-CP484E Part -3 : WV-CP480/G T05-PSSD-A228-1-01 T05-PSSD-A228-1-02 T05-PSSD-A228-1-03
1st March 2005 Issue 1 Technical Construction document Part -1 Conformity assessment Product: Colour CCTV Camera Model: WV-CP480/G Trade name : Panasonic 2. Part 1-a (1) Comply to the safety requirements in the EC Directive. Comply to 73/23/EEC as amended by the article 13 of 93/68/EEC (2) Attach the design information and harmonized standards for complying to the essential requirements. 3. Part 1-b (1)Comply to the protection requirements in the EC Directive. Comply to 89/336/EEC as amended by 92/31/EEC and 93/68/EEC (2)Attach the design information and harmonized standards for complying to the essential requirements.
1st March 2005 Issue 1 Technical Construction document Part 1-a Design fundamentals for complying to the essential safety and health requirements prescribed in the EC council Directive 73/23/EEC as amended by the Article 13 of 93/68/EEC and each Member States' legislation's transposing those Directives Principle element of the Safety objectives Harmonized standards applied Product Designing Features and Conformity Assessment Results Annex Item 1.a)-d) 73/23/EEC Annex Item 2. a)-d) 73/23/EEC EN60065 :2002 Insulation class : Class 1 Safety Critical Components : Use N/B Recognized Components Certificate /Test Report No : SEMKO Certificate No.: 416998 CB Test Report No.: Annex Item 3. a)-c) 73/23/EEC
1st March 2005 Issue 1 Technical Construction document Part b Design fundamentals for complying to Protection requirements prescribed in the EC Directive 89/336/EEC as amended by 92/31/EEC, 93/68/EEC and each Member States' legislation's transposing those Directives. Protection requirements Article 4, (a) 89/336/EEC Harmonized standards applied EN55022:1998 +A1:2000 +A2:2003 EN61000-3-2:2000 EN61000-3-3:1995 +A1:2001 Product Designing features and Conformity Assessment Results Designed to meet protection requirement Tested at Matsushita Yokohama Site subcontracted site of TUV Rheinland (C/B) Test Report No.: MYS-0401101 Article 4, (b) 89/336/EEC EN55024:1998 +A1:2001 +A2:2003 Designed to meet protection requirement Tested at Matsushita Yokohama Site subcontracted site of TUV Rheinland (C/B) Test Report No.: MYS-0401101
Exhibit #1 Report of Measurement Ref. No. MYS-0401101 Matsushita Yokohama Site PMCE Panasonic Mobile Communication Engineering Co., Ltd. EMC Department
Index 1. Summary 1 2. EUT Configuration & operating Conditions 2-3 3. Radiated Emission (30-1000MHz)at Anechoic Chamber 4 Frequency vs. Emission Level 5 Photograph 6-7 4. Conducted Emission (0.15-30MHz) 8 Frequency vs. Emission Level 9 Photograph 10 5. Harmonic Current Emission 11 Table 1 Harmonics Currents 12 Table 2 Voltage Source Qualification 13 Photograph 14 6. Voltage Fluctuation 15-16 Photograph 17 7. Electrical Discharge Test 18-20 Photograph 21 8. Radiated Electromagnetic Field Test 22 Photograph 23-25 9. Electrical Fast Transient / Burst Test 26-27 Photograph 28 10. Surge Immunity Test 29 Photograph 30 11. Radio Frequency Conducted Immunity Test 31 Photograph 32 12. Voltage Dip/Short Interruptions Immunity Test 33 Photograph 34 13. Measuring Instruments List. 35-38
1st March 2005 Issue 1 Technical Construction document Part -2 Conformity assessment Product: Colour CCTV Camera Model: WV-CP484E Trade name : Panasonic 1. Evaluation of compliance between basic model and similar model. Basic model : WV-CP480/G Similar model : WV-CP484E (1)Reason for the evaluation of similar model are as follows. Reason : Similar model is identical to basic model except for power supply (AC 24V) (2)Details of Differences points between basic model and similar model. Item Basic model Similar model In terms of schematic diagram In terms of wiring In terms of construction ---------- Ditto except for power supply circuit ---------- Ditto ---------- Ditto In terms of components Power cord for 220-240V : Power cord for 24V :
Certification of compliance for mass production / EMC 1. Explanation of difference between "Basic model" and "Similar models" concerning EMC. *If the compliance of similar model is judged by Competent Body or by yourself insert "C" or "S" in this column respectively. Basic Model Similar Model Difference * WV-CP480/G WV-CP484E Power Supply (AC 24V) S 2. Sampling procedure for mass production Specify the period of sampling test for confirming compliance with EMC standards (days or moth etc) from the first production) and testing method (full test or simplified test). If no test is specified, explanation the reason why the model is deemed to comply with the relevant EMC standard without testing. First Sampling Second Sampling Testing Method and followings Basic Pre-Production Mass-Production products Simplified Model Products which was not enough Test and the margin. Mass-Production confirming within one year Products from mass production. Similar Mass-Production Same as above Same as above Model Products The reason of no test, if applicable:
1st March 2005 Issue 1 Technical Construction document Part -3 Conformity assessment Product: Colour CCTV Camera Model: WV-CP480/CH Trade name : Panasonic 1. Evaluation of compliance between basic model and similar model. Basic model : WV-CP480/G Similar model : WV-CP480/CH (1)Reason for the evaluation of similar model are as follows. Reason : Similar model is identical to basic model except for power supply cord plug (for China ) (2)Details of Differences points between basic model and similar model. Item Basic model Similar model In terms of schematic diagram In terms of wiring In terms of construction ---------- Ditto except for power supply cord plug ---------- Ditto ---------- Ditto In terms of components Power cord plug for Europe Power cord plug for China
Certification of compliance for mass production / EMC 1. Explanation of difference between "Basic model" and "Similar models" concerning EMC. *If the compliance of similar model is judged by Competent Body or by yourself insert "C" or "S" in this column respectively. Basic Model Similar Model Difference * WV-CP480/G WV-CP480/CH Power Supply cord plug (for China) S 2. Sampling procedure for mass production Specify the period of sampling test for confirming compliance with EMC standards (days or moth etc) from the first production) and testing method (full test or simplified test). If no test is specified, explanation the reason why the model is deemed to comply with the relevant EMC standard without testing. First Sampling Second Sampling Testing Method and followings Basic Pre-Production Mass-Production products Simplified Model Products which was not enough Test and the margin. Mass-Production confirming within one year Products from mass production. Similar Mass-Production Same as above Same as above Model Products The reason of no test, if applicable:
Exhibit #3 Photograph-Appearance Exhibit #4 Safety Precautions Copy of a part of operation and installation manual.