healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Blanket and Solution Warming Cabinets NEW temperature monitoring system now available as an option. Requires no additional software. Download automatically begins when a USB flash drive is inserted into the front control panel. Data is then ready to be analyzed on any computer. Simple and user friendly. CMP has been building high quality warming cabinets for over 65 years and has become the industry standard for hospital and emergency room blanket and solution storage. CMP stainless steel Warming Cabinets can be found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty. Features: Stainless Steel Construction Many Standard Sizes Available Custom Sizes Electric Heated Compartments Microprocessor Control System Digital Display Over Temperature Alarm Customizable Temperature Settings/Limits UL/CUL Listed Separately Controlled Chambers Wire Shelves/Baskets to maximize airflow ± 2 F Accuracy Temperature Adjusting Lockout Removable Pilaster Strips for easy cleaning Uniform Heating Optional Quick-Temp USB temperature monitoring system Optional Pass-Through Feature Available Optional Wi-Fi and Ethernet connectivity Optional ¾ thick Thermopane Glass Doors Optional Casters Made in the USA Continental Metal Products Co., Inc. 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com sales@continentalmetal.com
healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Blanket and Solution Warming Cabinets Models: All models are available with optional thermopane glass doors, casters, pass-through feature and Quick-Temp USB temperature monitoring system. See page five for all available options. UL/CUL Listed DSW3AE-18-A (18 W) DSW3AE-18 DSW1AE-24 DSW2AE-2-24 with casters & glass doors DSW2AE-2-24-PT with pass-through feature DSW1AE-24-FH (74 H) Model Outside Dimensions Compartment Dimensions Volume Weight Compartments Shelves DSW1AE-18 30 W x 45 H x 21 D (762 x 1143 x 533 26.56 W x 25.88 H x 17.50 D (675 x 657 x 445 7.0 cu. ft. 180 lbs (82 kg) 1 1 fixed, 1 DSW1AE-18-FH (74 H) DSW1AE-24 DSW1AE-24-FH (74 H) DSW2AE-1-18 DSW2AE-1-24 DSW2AE-2-18 DSW2AE-2-24 DSW3AE-18 DSW3AE-18 (18 W) DSW3AE-24 30 W x 74 H x 21 D (762 x 1880 x 533 30 W x 45 H x 27 D (762 x 1143 x 686 30 W x 74 H x 27 D (762 x 1880 x 686 30 W x 74 H x 21 D (762 x 1880 x 533 30 W x 74 H x 27 D (762 x 1880 x 686 30 W x 74 H x 21 D (762 x 1880 x 533 30 W x 74 H x 27 D (762 x 1880 x 686 30 W x 26 H x 21 D (762 x 660 x 533 18 W x 26 H x 21 D (457 x 660 x 533 30 W x 26 H x 27 D (762 x 660 x 686 26.56 W x 54.87 H x 17.50 D (675 x 1394 x 445 26.56 W x 25.88 H x 23.50 D (675 x 657 x 597 26.56 W x 54.87 H x 23.50 D (675 x 1394 x 597 26.56 W x 21.75 H x 17.50 D (Top) (675 x 552 x 445 26.56 W x 30 H x 17.50 D (Bottom) (675 x 762 x 445 26.56 W x 21.75 H x 23.50 D (Top) (675 x 552 x 597 26.56 W x 30 H x 23.50 D (Bottom) (675 x 762 x 597 26.56 W x 21.75 H x 17.50 D (Top) (675 x 552 x 445 26.56 W x 30 H x 17.50 D (Bottom) (675 x 762 x 445 26.56 W x 21.75 H x 23.50 D (Top) (675 x 552 x 597 26.56 W x 30 H x 23.50 D (Bottom) (675 x 762 x 597 26.56 W x 14.25 H x 17.50 D (675 x 362 x 445 14.56 W x 14.25 H x 17.50 D (370 x 362 x 445 26.56 W x 14.25 H x 23.50 D (675 x 362 x 597 Custom Sizes Available 14.8 cu. ft. 390 lbs (177 kg) 9.4 cu. ft. 200 lbs (91 kg) 19.8 cu. ft. 410 lbs (186 kg) 13.9 cu. ft. 400 lbs (181 kg) 18.7 cu. ft. 420 lbs (191 kg) 13.9 cu. ft. 400 lbs (181 kg) 18.7 cu. ft. 420 lbs (191 kg) 3.8 cu. ft. 160 lbs (73 kg) 2.1 cu. ft. 140 lbs (64 kg) 5.2 cu. ft. 180 lbs (82 kg) 1 1 fixed, 4 1 1 fixed, 1 1 1 fixed, 4 1 heated, 1 unheated 1 heated, 1 unheated 2 fixed, 3 2 fixed, 3 2 2 fixed, 3 2 2 fixed, 3 1 1 fixed 1 1 fixed 1 1 fixed Continental Metal Products Co., Inc. 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com sales@continentalmetal.com
healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Blanket and Solution Warming Cabinets Specifications: Continental Metal Products Warming Cabinets are constructed of 18 gauge (1.2, type 304 stainless steel with a No. 4 finish. The heating chamber shall be insulated with 1 ½ (38 thick fiberglass insulation. DSW1AE models contain one wire shelf and DSW2AE models contain three wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾ (19 thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a pass-through feature, enabling loading of the Warming Cabinet from either side of unit. The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 F hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet. All temperature settings and limits can be customized utilizing the buttons on the front control panel. Users can adjust limit alarm setpoint, delta alarm setpoint, low range setpoint and high range setpoint. A lockout feature is standard and can be enabled to prevent any adjustments to the current settings. An optional USB port can be provided on the front control panel for easy access to temperature history data utilizing a USB flash drive. Service Requirements: DSW1AE-18 or -24 120V, 60HZ, 1PH, 7 Amps DSW1AE-18 or -24 (74 H) 120V, 60HZ, 1PH, 12.5 Amps DSW2AE-1-18 or -24 (One Compartment Heat) - 120V, 60HZ, 1PH, 7 Amps DSW2AE-2-18 or -24 (Two Compartment Heat) - 120V, 60HZ, 1PH, 12.5 Amps DSW3AE-18 or -24 120V, 60HZ, 1PH, 7 Amps DSW3AE-18 (18 W) 120V, 60HZ, 1PH, 7 Amps UL/CUL Listed Units are also available for 220/240V, 50/60HZ Continental Metal Products Co., Inc. 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com sales@continentalmetal.com
healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Blanket and Solution Warming Cabinets NEW Automatic Temperature Monitoring System Option Blanket and Solution Warmer Temperature Log Temperature Log Reporting Made Simple No More Handwritten Logs Over temperature audible alarm and light Digital display with dual temperature adjusting controls Model DSW2AE-2-24-GD Shown (with optional Thermopane glass doors) * Fully customizable temperature range settings using the front control panel (adjust limit alarm setpoint, delta alarm setpoint, low range setpoint & high range setpoint) * Temperature adjusting lock-out standard * Optional Quick-Temp Temperature Data Logging utilizing USB flash drive * Optional Wi-Fi and Ethernet connectivity Removable panel with fan 200 F Thermal disc for additional overheat protection Perforated heater guard with 750 watt strip heater for faster heat up time Temperature sensors Easy open magnetic latch to secure door ¾ thick Thermopane glass door secured in stainless steel frame Wire shelves or baskets for increased air circulation Pilaster strips for shelf adjustment Heat resistant door gasket Type 304 stainless steel construction Chrome plated edgemount hinges Optional Casters (not shown) Recessed toe kick UL/CUL Listed Continental Metal Products Co., Inc. 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com sales@continentalmetal.com
healthcare division CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR Proudly Made in the USA for over 65 years Blanket and Solution Warming Cabinets Options: 18 or 24 deep (inside dimensions) Left or right side door hinging Freestanding or recessed mounting Pass-through feature Clear Thermopane glass doors 74 high DSW1AE Keyed door lock Casters for mobility NEW Temperature Monitoring System USB Flash Drive support for temperature data logging (requires no software one year temperature history) Keypad or card reader operated electronic security door lock Lower heated or unheated chamber for DSW2AE Stainless steel base for DSW1AE or DSW3AE Seismic anchoring Stainless steel or epoxy coated baskets Available with drawer slides Available on all models Many sizes available Wi-Fi and Ethernet temperature monitoring Stainless steel table (many sizes available) Custom sizes Electronic interlock system for optional pass-through feature Available with or without casters Prevents door from opening when the opposing door is open Continental Metal Products Co., Inc. 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com sales@continentalmetal.com