Model: LV-PUR131 True HEPA Air Purifier Questions or Concerns? Please contact us Mon-Fri 9:00AM-5:00PM PST at (888)726-8520 or email support@levoit.com
Thank You. Thank you for purchasing the LV-PUR131 True HEPA Air Purifier by Levoit. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at (888)-726-8520 or by email at support@levoit.com. We hope you enjoy your new product!
Table of Contents Safety Information Main Functions Set-Up Operation Maintenance Troubleshooting Specifications Customer Support Warranty Information 3 4 5 6 8 10 10 11 12
Safety Information IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage to the product. DO NOT operate the unit if cord or plug is damaged. Doing so may result in damage to the unit or injury. DO NOT run the power cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. DO NOT ROUTE CORD UNDER FURNITURE OR APPLIANCES. Place the power cord away from high-traffic areas. Only use the air purifier as described in this manual. DO NOT handle the unit with wet hands. Thoroughly dry your hands before handling any part of the air purifier. Hair, loose clothing and body parts can get caught in the machine and may result in injury. Keep hair, loose clothing and body parts away from openings and moving parts. DO NOT unplug the air purifier by pulling on the cord. Doing so may result in electrical spark or fire. Unplug the unit by grasping and pulling the plug. DO NOT use an extension cord with this unit. Place the air purifier so that the power cord easily reaches a standard electrical outlet for a polarized plug. DO NOT place the air purifier near sources of heat, such as stove tops, ovens, radiators or computers. Unplug the appliance from the power supply before servicing. This unit should be inspected frequently. Dirt that has been collected should be removed regularly to prevent excessive accumulation that may result in flashover or fire. DO NOT use the air purifier outdoors or on wet surfaces. DO NOT use the air purifier in an enclosed space where flammable, combustible or explosive gasses are present. DO NOT use in an area where toxic vapors, flammable dust or oxygen tanks are present. DO NOT place open flames, including candles, directly in front of the air purifier. It is important to keep all objects away from the air intake grill. DO NOT remove the back cover while the air purifier is on. Doing so will automatically turn off the unit. Place the air purifier on a flat, solid, stable surface. Never place the unit on soft surfaces such as a bed or sofa. Properly position the air purifier so that dirty air is not drawn across your head or body while sitting or sleeping. Child supervision is required while the air purifier is on. Do not allow children to play on or near the air purifier. This product is suitable for use with solid-state speed controls. 3
Main Functions Function Diagram 1 2 3 4 5 6 7&8 9 7 1. LED Display 2. Touch-Control Panel 3. Dust sensor 4. Reset button vent 5. Housing 6. Activated Carbon Filter 7. HEPA Filter 8. Pre-filter 9. Back Cover 4 8
Set-up LED Display 1 2 3 1. Open the back cover of the air purifier and remove both filters from their plastic packaging. Reinstall the filters, first with the activated carbon filter (black) followed by the HEPA filter (white). Make sure the pull tabs are facing outward. 4 Carbon Filter HEPA Filter 5 6 7 3rd 2nd 1st 1. Power Symbol 2. Change Filter 3. Timer 4. Air Quality Indicator 5. Auto Mode 6. Sleep Mode 7. Fan Speed 5
2. Replace the back cover by aligning the bottom portion of the cover with the inlets on the bottom of the housing. Slowly close the cover by aligning the top portion of the back cover with the inlets at the top of the opening. Button Controls Operation On/Off button. Press the Display button to turn on or turn off the display while the air purifier is operating. NOTE: While the display is off, you can press any button to turn it back on to check the current operating status or change the purifier s settings. The display will turn off after 5 seconds of inactivity. 3. Plug the unit into an electrical outlet. The unit will chime indicating that it is connected to a power source. 4. Press the Power button to turn on the air purifier; the fan will automatically default to Low Speed. The Sleep Mode button sets the air purifier to the lowest setting possible to create a quiet environment while producing clean air. Press the Sleep Mode button to activate this function. You can press either the Sleep Mode button or the Speed button to exit out of Sleep Mode; the purifier will resume operating at its default Low Speed. NOTE: Sleep Mode is the lowest fan speed. All other functions on the air purifier cannot be used while on Sleep Mode. 6
Press the Auto button to activate and deactivate the air purifier s automatic sensor mode. The automatic sensor adjusts the air purifier s fan speed according to the current air quality to provide clean air for your living space. The air quality indicator will also illuminate on the LED display; the table below shows the different colors of the air quality indicator in correlation to both air quality & fan speed. The air purifier will return to its default Low Speed when Auto Mode is turned off. Color Air Quality Fan Speed Red Bad High Yellow Moderate Medium Green Good Low Blue Very Good Sleep Mode Press the Speed button to cycle through the unit s fan speeds: Low, Normal and High. NOTE: Fan speed cannot be adjusted while on Auto or Sleep Mode. The Timer button allows you to set the air purifier to run from 1-12 hours. To set the timer, press the Timer button to cycle through the different time settings. When you reach your desired time, the display will flash 3 times before setting. The unit will automatically power off once the timer is finished. To cancel the timer, press the Timer button until the display reads -:--, and wait until -:-- flashes 3 times. NOTE: Sleep Mode cannot be activated while on Auto Mode. Press the Auto button to exit out of Auto Mode. 7
Cleaning & Maintenance Changing and Replacing the Filters 3. Carefully remove the new filters from their plastic packaging and place them into the unit. The activated carbon filter (black) should be installed first, followed by the HEPA filter (white). Make sure the pull tabs are facing outward. 4. Replace the back cover onto the housing. The Change Filter symbol will flash when it is time to change the air filters in the air purifier. It is recommended to change the air filters every 6 months or when the air filters have become very dirty. Follow the steps below to properly install new air filters in your unit. (Scan the QR code below to purchase new air filters.) Carbon Filter HEPA Filter 1. back cover. 2. Remove both HEPA and activated carbon filters from the housing. Use the pull tabs on each filter to remove them. 3rd 8 2nd 1st
Cleaning The Dust Sensor 5. Plug in and turn the unit on. Use a pen, pencil or other small object to press the black reset button inside the reset button vent. The Remove the dust sensore cover with a tool and clean the lens with a cotton swab dipped in clean water. Immediately dry the sensor using a dry, clean cotton swab and close the cover. NOTE It is recommended to clean the dust sensor regularly. NOTE: The filters cannot be cleaned manually. If necessary, purchase new filters for the unit on Amazon.com. The back cover must be placed back on the unit in order for it to power on. It is recommended to change the air filters every 6 months. 9
Troubleshooting Problem Cause Solution Unit does not power on. Fault in power source. Check outlet to see if unit is working. Reset outlet if possible. Unit is not working. Plug not connected. Insert the plug into an electrical outlet. Faulty electrical outlet. Try another outlet. Unusual noise. Unit always show that the air quality is poor Back cover not properly placed on the unit. Foreign object inside unit. Dirty filter. Filter does not fit properly. The dust sensor does not work proprely The dust sensor lens is dirty Specifications Properly replace the back cover as noted in the Set-Up section. Contact customer service. Replace the filter. Properly place filter(s) as noted in the Set-Up and Changing the Filter sections. Contact customer service Clean the dust sensor as note in Cleaning Maintenance Power Supply AC 120V / 60 Hz Power Consumption 40W Applicable Area 30 m 2 (300 ft 2 ) Operating Conditions Temperature:-10 ~55 (14 F~131 F) Humidity: 95%RH Noise Level <52 db CADR 135CFM(230 m³/h) Standby Power <0.8 W 10 Package Contents 1 x True HEPA Air Purifier 1 x User Manual
Customer Support Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. We re here for you. Levoit Corporation 1202 N Miller Street, Suite A Anaheim, CA 92806 Toll-Free: 888.726.8520 Email: support@levoit.com Support Hours Monday - Friday: 9:00am - 5:00pm PST *Please have your order number ready before contacting customer support. 11
Warranty Information Terms & Policy Levoit warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year, effective from the date of purchase. Warranty lengths may vary between product categories. For specific warranty terms, please refer to your product s listing page. Under the limited warranty, Levoit will replace any product found to be defective due to manufacturer flaws based on eligibility; refunds are available within the first 30 days of purchase. This warranty extends only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product. This warranty is non-transferrable. Levoit is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual. ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Should your product prove defective within the specified warranty period, please return the defective unit in its original packaging with (1) an original copy of the invoice, (2) your order confirmation number, (3) and your warranty ID number. To find out more about extending your warranty, visit www. levoit.com/warranty or contact customer support. Date of Purchase: Purchased From: Order Number: This warranty does not apply to the following: Damage due to abuse, accident, alteration, misuse, tampering or vandalism. Improper or inadequate maintenance. Damage in return transit. Unsupervised use by children under 18 years of age. Levoit and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. 12
www.levoit.com