2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17065:2012 to provide product conformity certification Wonersh House The Guildway Old Portsmouth Road Guildford Surrey GU3 1LR Contact: Mr Iman Bagheri Tel: +44 (0)1483 302130 Fax: +44 (0)1483 302230 E-Mail: iman.bagheri@ul.com Website: www.ul-europe.com Locations where certification activities covered by the above Accreditation Standard are undertaken. 220 Cygnet Court Centre Park Warrington WA1 1PP Manager: GC Page 1 of 17
DETAIL OF ACCREDITATION Product Standard Specific requirements for the assessment of fire protection to structural steel elements BS ISO 834-11:2014 UL EU Voluntary Mark for Products Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance). Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing). EN 12150-2:2004 EN 14179-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 CCN: ENCB, ENCC, ENCD, ENCE EN 12150-2:2004 EN 14179-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 CCN: ENCB, ENCC, ENCD, ENCE Fire stopping, fire sealing and fire protection products ETAG 026-1 ETAG 026-2 Version 08/2011 ETAG 026-3 Version 08/2011 CCN: ENCG Fire Protective Products ETAG 018-1 ETAG 018-2 (2011) ETAG 018-3 (2013) ETAG 018-4 (2012) CCN: ENCF Fire Resistance Classification BS EN 13501-2:2007+A1:2009 BS EN 13501-3:2005+A1:2009 CCN: ENDB, ENDC Manager: GC Page 2 of 17
Product Standard Building Hardware related to doors, gates and windows EN 1125:2008 EN 1154:1996/A1: 2002 EN 1154:1996/A1: 2002/AC: 2006 EN 1155:1996/A1: 2002/AC: 2006 EN 1155:1997/A1: 2002 EN 1158:1997/A1: 2002 EN 1158:1997/A1: 2002/AC: 2006 EN 12209:2003 EN 12209:2003/AC: 2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC: 2003 END Manager: GC Page 3 of 17
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, ISO17021 and ISO17025 EN 12094-1:2003 EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 EN 54-16:2008 EN 14604:2005 EN 14604:2005/AC:2008 EN 54-3:2014 EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 EN 54-10:2002 EN 54-10:2002/A1:2005 * EN 54-12:2015 Manager: GC Page 4 of 17
EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 EN 54-11:2001 EN 54-11:2001/A1:2005 EN 54-17:2005 EN 54-17:2005/AC:2007 EN 54-18:2005 EN 54-18:2005/AC:2007 Manager: GC Page 5 of 17
EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-21:2006 * EN 54-22:2015 EN54-23:2010 Manager: GC Page 6 of 17
EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012 * EN54-26:2015 * EN54-27:2015 Manager: GC Page 7 of 17
EN54-28:2016 * EN54-29:2015 * EN54-30:2015 Manager: GC Page 8 of 17
* EN54-31:2014 and explosion suppression products : - Smoke and heat exhaust ventilation systems-kits (fire safety). * EN 15650:2010 * EN 12101-8:2011 Manager: GC Page 9 of 17
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes). EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003 * EN 16034:2014 * EN 1303:2015 * EN 14351-1:2006 (Excluding those with fire or smoke resistence) * PREN 14351-2:2009 (Excluding those with fire or smoke resistence) * EN 14846:2008 2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance). EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004 Manager: GC Page 10 of 17
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as antibullet, or anti-explosion glazing). EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004 2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance). EN 1279-5:2005+A2:2010 2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing). EN 1279-5:2005+A2:2010 98/213/EC Internal partition kits (1/5) ETAG 003 Manager: GC Page 11 of 17
99/454/EC Fire stopping, fire sealing and fire protection products (1/2) ETAG 026-1 ETAG 026-2 Version 08/2011 ETAG 026-3 Version 08/2011 ETAG 018 1 Version 27-06-2013 ETAG 018 2 Version 06-12-2011 ETAG 018 3 Version 27-06-2013 ETAG 018 4 Version 11-01-2012 99/454/EC Fire stopping, fire sealing and fire protective products (2/2) ETAG 026-1 ETAG 026-2 Version 08/2011 ETAG 026-3 Version 08/2011 EN 12259-1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06 EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002 EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005 97/808/EC Floorings (2/2) : - Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses). EN 14041:2004 EN 14041:2004/AC:2006 Manager: GC Page 12 of 17
97/808/EC Floorings (2/2) : - Rigid flooring products<br>(a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products (for internal uses including enclosed public transport premises). EN 14342:2005+A1:2008 Fixed fire fighting systems: Pillar fire hydrants EN14384:2005 Smoke and Heat Control Systems. Part 7: Smoke Duct Sections EN 12101-7:2011 Fire Classification of Products and Building Elements. Part 4: Classification using data from fire resistance tests on Components of Smoke Control Systems. EN 13501-4:2016 Manager: GC Page 13 of 17
As a Technical Body (TAB) for developing European Documents Annex IV Product Areas 2 Doors, windows, shutters, gates and related building hardware 10 Fixed fire fighting (fire alarm/detection, fixed fire fighting, fire and explosion suppression product) 21 Internal and external wall and ceiling finishes. Internal partition kits 30 Flat glass, profiled glass and glass block products 35 Fire stopping, fire sealing, fire protective products and fire retardant products Manager: GC Page 14 of 17
Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) (EU) 2016/425 Personnel Protective Equipment Regulation Articles: 10 EC typeexamination 11A EC quality control system for the final product 11B System for ensuring EC quality of production by means of monitoring Module B EU-type examination Module C2 to type based on internal production control plus supervised product checks at random intervals Equipment providing face protection Equipment providing eye protection Equipment providing foot and Leg protection Equipment providing general body protection (clothing) Equipment providing hand and arm protection Equipment providing head protection Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation. Module D to type based on quality assurance of the production process against biological agents against drowning and buoyancy aids against falls from height Manager: GC Page 15 of 17
Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) Articles: 10 EC typeexamination 11A EC quality control system for the final product 11B System for ensuring EC quality of production by means of monitoring against cold [cold > -50 C] against cold [extreme cold < -50 C] against heat [heat > 100 C and fire flame] Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation. (EU) 2016/425 Personnel Protective Equipment Regulation Module B EU-type examination Module C2 to type based on internal production control plus supervised product checks at random intervals against heat [heat < 100 C] against mechanical risks Module D to type based on quality assurance of the production proces clothing against static electricity clothing for use in potentially explosive atmospheres against knife cuts Manager: GC Page 16 of 17
(EU) 2016/425 Personnel Protective Equipment Regulation clothing for firemen for firemen Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation. Machinery Directive (2006/42/EC) Implemented in UK Law by: Supply of Machinery (Safety) Regulations 2008 (SI 2008/1597) Annex IX: EC typeexamination Annex X: Full quality assurance 19. Protective devices designed to detect the presence of persons. 20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11. 21. Logic units to ensure safety functions. Marine Equipment Directive 2014/90/EU (as amended) Implemented in UK Law by: The Merchant Shipping (Marine Equipment) Regulations 2016* Chapter 4, Article 15 & Annex II Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: Product Verification Life Saving Appliances MED 1.1 MED 1.4 to MED 1.7 ** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU Process 27-MD-P0852 Fire Protection MED 3.3 MED 3.5 Note: The inspection of items marked thus * are subject to legislative requirements including the appointment of persons or bodies to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation END Manager: GC Page 17 of 17