Test Report issued under the responsibility of: TEST REORT IEC 60825-1, 2 nd Edition art 1: Equipment classification and requirements Report Reference No....: EFSH15041135-IE-01-L01 Date of issue...: May 28, 2015 Total number of pages... 13 page Testing Laboratory...: Address... : Applicant s name...: Address... : Eurofins roduct Testing Service(Shanghai) Co.,Ltd No. 395 West Jiangchang Road, Zhabei District, Shanghai, China SHENZHEN BECEN OTOELECTRONICS SCITECH CO., LTD 6RD FLOOR 1 BUILDING, HUAFENG TECHNOLOGY ARK, FENGTANG ROAD, FUYONG, BAOAN, SHENZHEN, CHINA Test specification: Standard... : Test procedure... : Non-standard test method..: EN 60825-1 : 2007 (2nd Edition) Test Report Test Report Form No.... : Test Report Form(s) Originator... : IEC60825_1D Intertek Semko AB Master TRF... : Dated 2007-06 Copyright 2007 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. Test item description... : Trade Mark...: Manufacturer...: Model/Type reference...: Ratings... : LASER OINTER BECEN Same as applicant BC-L# # CAN BE 01-29, 01-09 RED, 10-19 URLE, 20-29 GREEN DC 1.5*2 by battery
Testing procedure and testing location: Testing Laboratory: Testing location/ address...: Associated CB Laboratory: age 2 of 13 Report No. EFSH15041135-IE-01-L01 Eurofins roduct Testing Service (Shanghai) Co., Ltd No. 395 West Jiangchang Road, Zhabei District, Shanghai, China Testing location/ address... : Tested by (name + signature)... : Approved by (+ signature)... : Keith Wei Jerry Hu Testing procedure: TM Tested by (name + signature)...: Approved by (+ signature)...: Testing location/ address...: Testing procedure: WMT Tested by (name + signature)...: Witnessed by (+ signature)...: Approved by (+ signature)...: Testing location/ address...: Testing procedure: SMT Tested by (name + signature)...: Approved by (+ signature)...: Supervised by (+ signature)...: Testing location/ address... : Testing procedure: RMT Tested by (name + signature)...: Approved by (+ signature)...: Supervised by (+ signature)...: Testing location/ address...:
age 3 of 13 Report No. EFSH15041135-IE-01-L01 Copy of marking plate Summary of testing: Tests performed (name of test and test clause): 4. Engineering specifications 5. Labeling 6. Other informational requirements 7. Additional requirements for specific laser products 8. Classification 9. Determination of the accessible emission level Testing location: Eurofins roduct Testing Service(Shanghai) Co.,Ltd No. 395 West Jiangchang Road, Zhabei District, Shanghai, China Summary of compliance with National Differences: Group difference (there is no difference). Test item particulars:
age 4 of 13 Report No. EFSH15041135-IE-01-L01 Classification of installation and use... : Red light and green light is classified as Class 3R urple light is classified as Class 3B Supply Connection... : Battery... :... : ossible test case verdicts: - test case does not apply to the test object...: - test object does meet the requirement...: (ass) - test object does not meet the requirement...: F (Fail) Testing...: Date of receipt of test item...: April 24, 2015 Date (s) of performance of tests...: April 24, 2015 to May 28, 2015 General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma is used as the decimal separator. General product information: The products covered in this test report are laser pointers for indoor only. All models are same appliances except different model name and different laser color. BC-L# # CAN BE 01-29, 01-09 RED, 10-19 URLE, 20-29 GREEN
age 5 of 13 Report No. EFSH15041135-IE-01-L01 4 ENGINEERING SECIFICATIONS 4.1 General remarks Modification 4.2 rotective housing 4.2.1 General 4.2.2 Service 4.2.3 Removable laser system 4.3 Access panels and safety interlocks 4.3.1 Access panels of protective housing roduct Class... : Accessible emission during removal of access panel... : The removal of the panel gives access to laser radiation levels designated by X in the table Accessible emissions after removal... : 4.3.2 Deliberate override mechanism 4.4 Remote interlock connector 4.5 Manual reset 4.6 Key control 4.7 Laser radiation emission warning 4.7.1 Class 3R (λ<400 nm; λ>700 nm), 3B and 4 4.7.2 Audible or visible warning 4.7.3 Operational control and laser aperture 4.7.4 Laser emission distributed through more than one output 4.8 Beam stop or attenuation 4.9 Controls 4.10 Viewing optics a) Human access to laser radiation in excess of Class 1M prevented when the shutter is opened or attenuation varied b) Opening of the shutter or variation of the attenuation prevented when exposure to laser radiation in excess of Class 1M is possible 4.11 Scanning safeguard 4.12 Walk-in access
age 6 of 13 Report No. EFSH15041135-IE-01-L01 a) Means provided so that any person inside the housing can prevent activation of a Class 3B or 4 laser hazard b) A warning device provides adequate warning of emission to any person within the housing c) Where walk-in access during operation is intended or reasonably foreseeable, emission of laser radiation that is equivalent to Class 3B or Class 4 while someone is present inside the enclosure of Class 1, Class 2 or Class 3R product shall be prevented by engineering means 4.13 Environmental conditions - climatic conditions - vibration and shock 4.14 rotection against other hazards 4.14.1 Non-optical hazards (product safety standard) - electrical hazards; - excessive temperature; - spread of fire from the equipment; - sound and ultrasonic; - harmful substances; - explosion; 4.14.2 Collateral radiation 5 LABELLING 5.1 General LASER RODUCT CLASS... : Class 3 Labelling location (roduct / User instruction / ackage) Warning label Hazard symbol (Figure 1) Explanatory label (Figure 2) roduct 5.2-5.6 Text on explanatory label... : LASER RADIATION AVOID DIRECT EYE EXOSURE CLASS 3R LASER RODUCT for purple light LASER RADIATION AVOID EXOSURE TO BEAM CLASS 3B LASER RODUCT for red and green light 5.7 Aperture label
age 7 of 13 Report No. EFSH15041135-IE-01-L01 5.8 Radiation output and standards information Max output of laser radiation... : ulse duration... : Emitted wavelength(s)... : The name and publication date of the standard... : Green light: 534.7nm Red light: 658.6nm urple light: 404.6nm 5.9 Labels for access panels 5.9.1 a) f) Warning wording used... : CAUTION CLASS 3 LASER LIGHT WHEN OEN DO NOT STARE INTO THE BEAM 5.9.2 Labels for safety interlocked panels Warning wording used... : 5.10 Warning for invisible laser radiation... : 5.11 Warning for visible laser radiation... : 6 OTHER INFORMATIONAL REQUIREMENTS 6.1 Information for the user a) adequate instructions for proper assembly, maintenance and safe use and description of the classification limitations, if appropriate b) warning for Class 1M and 2M c) laser beam parameters for radiation above the AEL of Class 1 Wavelength... : Beam divergence... : ulse duration... : Maximum power or energy output... : d) embedded laser products and other incorporated laser products e) ME and NOHD for Class 3B and Class 4 laser products For collimated beam Class 1M and 2M lasers the extended NOHD (ENOHD) f) information for the selection of eye protection g) reproduction of labels h) location of laser apertures i) listing of controls, adjustment of procedures and warning statement
j) information about laser energy source if not incorporated in the manual age 8 of 13 Report No. EFSH15041135-IE-01-L01 6.2 urchasing and service information a) safety classification of each laser product stated in descriptive material b) adequate instructions for servicing available 7 ADDITIONAL REQUIREMENTS FOR SECIFIC LASER RODUCTS 7.1 Applicable other parts of the standard series IEC/EN 60825 IEC 60825-2 (Safety of optical communication systems) IEC 60825-4 (Laser guards) IEC 60825-12 (Safety of free space optical communication systems used for transmission of information) Further information may be found in: IEC/TR 60825-3 (Guidance for laser displays and shows) IEC/TR 60825-5 (Manufacturer s checklist for IEC 60825-1) IEC/TR 60825-8 (Guidelines for the safe use of laser beams on humans) IEC/TR 60825-9 (Compilation of maximum permissible exposure to incoherent optical radiation) IEC/TR 60825-10 (Application guidelines and explanatory notes to IEC 60825-1) IEC/TR 60825-13 (Measurements for classification of laser products) IEC/TR 60825-14 (A user s guide) IEC 62471 (CIE S 009) (hotobiological safety of lamps and lamp system) 7.2 Medical laser products Class 3B and Class 4 medical laser products comply with IEC 60601-2-22 7.3 Laser processing machines Comply with IEC/ISO 11553-1 7.4 Electric toys Comply with IEC 62115 7.5 Consumer electronic products Complying with IEC 60950 or IEC 60065
age 9 of 13 Report No. EFSH15041135-IE-01-L01 8 CLASSIFICATION 8.2 Classification responsibilities 8.3 Classification rules 8.3a Radiation of a single wavelength Single wavelength 8.3b Radiation of multiple wavelengths 1) Laser product emission two or more wavelengths in spectral regions shown as additive in Table 5.. : 2) Laser product emission two or more wavelengths in spectral regions not shown as additive in Table 5... : 8.3c Radiation from extended sources... : Value of angular subtense (mrad)... : 8.3d Non-uniform retinal image radiance profile, noncircular and multiple sources 8.3e Time basis 1) 0.25s Class 3B 2) 100s Class 3R 3) 30000s 8.3f Repetitively pulsed or modulated lasers 1) Exposure from any single pulse not exceeding the AEL for a single pulse 2) Average power for a pulse train 3a) Constant pulse energy and pulse duration 3b) Varying pulse widths or varying pulse durations 9 DETERMINATION OF ACCESSIBLE EMISSION LEVELS 9.1 Tests Single fault eliminated Housing material withstanding degradation Fault detection 9.2 Measurement conditions... : 20-30 C Measured laser radiation... : See table measured laser radiation, calculations and comparison with AEL limits 9.3 Measurement geometry 9.3.1 General, evaluation scheme a) Simplified (default) method
age 10 of 13 Report No. EFSH15041135-IE-01-L01 b) Increased AEL by parameter C 6 9.3.2 Default (simplified) evaluation Condition applied... : Condition 2, Condition 3 Aperture stop diameter (mm)... : 7mm Measurement distance (mm)... : 70mm, 100mm 9.3.3 Extended sources C 6... : 1 9.3.3a Aperture diameters Condition applied... : Condition 2, Condition 3 Aperture stop diameter (mm)... : 7mm Angular subtense of the apparent source... : Green light: <1.5mrad Red light: <1.5mrad urple light: <1.5mrad 9.3.3b Angle of acceptance Condition applied... : Condition 2, Condition 3 1) hotochemical retinal limits... : 1.5mrad Angel of acceptance... : 1.5mrad 2) All other retinal limits... : Angel of acceptance... :
Measured laser radiation, calculations and comparison with AEL limits: age 11 of 13 Report No. EFSH15041135-IE-01-L01 1. Measuring condition - The radiant power is measured under normal and fault condition. - Measurement condition 1 is not measured, because it is obviously less severe than measurement condition 2 and condition 3. 2. Measured Results - Measured angular subtense: <1.5mrad Model Wavelength Normal condition Fault condition Using 7mm apertures stop at 70mm from source Green light 534.7nm 3.12mW - Red light 658.6nm 1.4mW - urple light 404.6nm 21.8mW - 3. AEL (Accessible Emission Limit) Every single AEL Emission duration Wavelength Radiant power AEL Class 100s 534.7nm 3.12mW 5.0 10-3 C6W = 5 10-3 W = 5mW 3R 100s 658.6nm 1.4mW 5.0 10-3 C6W = 5 10-3 W = 5mW 3R 0.25s 404.6nm 21.8mW 500mW 3B Remarked: <1.5mrad,C6=1 4. Classification green light and red light are is classified as Class 3R,urple light is classified as class 3B 5. Measuring Instrument Name Maker Model Serial No. Date expired Laser power meter Detector Newport Newport 1930-C 918-UV A0705478 A0705479 2016-04-23 Laser spectrum analyzer Newport OSM-400-UV-NIR A0705480 2016-04-27
Group difference age 12 of 13 Report No. EFSH15041135-IE-01-L01 National Differences for (country name) There is no special requirement
hoto: age 13 of 13 Report No. EFSH15041135-IE-01-L01 hoto 1 Overall view hoto 2 Internal view --------------------------------End of report--------------------------------