Hybrid solutions Heating systems Industrial systems Refrigeration systems
2/3 Heating with hybrid appliances future safety included There are many approaches towards energy and heating solutions, and the decision for one or the other heating system is not easy. What we do know though, is that the prices for fossil fuels and electricity are subject to considerable long-term fluctuations. It is therefore good when you don t have to coit to just one single energy source for your heating, but can be future-safe with a hybrid solution. The future-safe energy mix in one In hybrid appliances, two independent heat generators are integrated into one unit: a gas or oil condensing boiler combined with an electrical heat pump. This energy mix combines renewable with highly efficient, and the user receives the maximum freedom of being able to use the least-expensive energy source. Exactly according to the respective situation on the energy market, the control can be set so that when there are fluctuating energy prices, the most cost-effective and efficient operating method is selected. Highly efficient and renewable at the same time Regenerative heat from the environment saves valuable resources and reduces CO 2 emissions. Combined with a highly efficient condensing boiler from Viessmann, you can rely at all times on energy-reduced, economical operation. In this brochure we not only inform you about the flexibility and security provided by a gas or oil hybrid appliance from Viessmann, but also about their possible uses in the modernisation of already existing condensing boilers.
Hybrid compact appliances Hybrid compact appliances from Viessmann: the future-safe energy mix in one appliance Hybrid compact appliances combine two energy sources in one appliances: Highly efficient with a modern condensing boiler for gas or oil. Renewable due to free ambient heat with a heat pump. These days, if you want to be independent of energy providers when heating, you can t rely on just one single energy source. The best solution for this is using a heating method that provides the highest possible level of flexibility while at the same time using several energy sources with hybrid compact appliances from Viessmann. Always set for savings The hybrid appliances from Viessmann combine the benefits of a heat pump with those of a high-efficiency condensing boiler. You therefore achieve an optimal mix in consumption between regenerative energies and conventional energy sources. The intelligent control can be set individually in such a way that the more efficient heat generator is always selected. In other words, the source that is cheapest for the operator. Constantly fluctuating energy prices are thereby taken out of the equation. Free choice of energy source: gas or oil Viessmann hybrid compact appliances not only combine efficient heat pump technology with tried-and-tested gas condensing boiler technology, such as in the Vitocaldens 222-F, but also with oil in the Vitolacaldens 222-F. Using the innovative Vitolacaldens 222-F hybrid compact appliances, you have a futureproof solution for heating modernisation with oil. Because you profit from economical oil technology and always have a cost-effective alternative when energy prices fluctuate. Take advantage of these benefits Future-proof heat supply by use of two heat generators in one appliance Automatic determination of the most efficient operating mode Prepared for SmartGrid and consumption of self-produced electricity from a photovoltaic system Always according to the respective requirements for operation with gas or oil Also for retrofitting Oil condensing boiler Heat pump Vitotronic 200 control with Hybrid Pro Control energy manager Gas condensing boiler Modern heating: free energy from the environment with a heat pump plus condensing boiler for gas or oil. And all perfectly controlled by the Vitotronic 200 with the Hybrid Pro Control energy manager.
4/5 10-year warranty* on stainless-steel heat exchanger for oil/gas condensing boilers up to 150 * Requirements and overview of products at www.viessmann.de/garantie Condensing boilers for gas or oil with the stainless steel Inox-Radial heat exchanger: sustainable and efficient The condensing boiler: efficiency also through use of stainless-steel heat exchangers Condensing boiler technology provides one of the most efficient types of heat generation. The reason: This heating technology not only recovers heat from burning oil and gas. It also uses the residual heat in the flue gas for heating heat that is normally lost in the chimney when using traditional boilers. With condensing boilers from Viessmann, the stainless steel Inox-Radial heat exchangers ensure that the flue gases cool down so much before being discharged to the chimney that the water vapour contained in it can be specifically condensed, and the released heat is additionally transferred to the heating system. Condensing boilers therefore achieve a standard degree of utilization of up to 98 percent and are especially energy-saving in operation. The heat pump: efficiency by using free ambient heat Free ambient heat is used by the heat pump extremely efficiently, so it can easily cover the basic load when the system is running. The outdoor unit thereby withdraws the heat contained in the air and brings it to a flow temperature of 55 C by the heat pump process. And: heat pumps from Viessmann are especially silent and low in vibration, the compressor unit is low-maintenance and designed for reliable operation and a long service life. Free ambient heat used extremely efficiently: the heat pump in the hybrid compact appliances
Control Which energy source is the cheapest? That is easily controlled completely automatically The Vitocaldens 222-F and Vitolacaldens 222-F hybrid compact appliances and the split air/water Vitocal 250-S heat pump are equipped with the Vitotronic 200 control. The intelligent Hybrid Pro Control energy manager is already integrated. The system can always be viewed when on the road using the ViCare app Normally, heating systems are controlled based either on the room or the outside temperature. The intelligent Hybrid Pro Control energy manager goes beyond this and controls the system with variable settings. The operator can define these individually and change them at any time: Energy prices CO 2 emissions Consumption of self-produced electricity Energy efficiency Heat requirement Hybrid Pro Control: the right energy mix for efficient operation For instance, thanks to Hybrid Pro Control, the control detects when the heat pump is able to cover the entire heat requirement. If this is exceeded, then it requires support from the fuel value module. Hybrid Pro Control automatically determines this time and reacts accordingly: after the current energy costs have been entered for electricity, gas or oil, it calculates which energy source can be currently used most efficiently. Hybrid Pro Control always has an overview of the complete system. The integrated energy manager automatically determines the most efficient operating mode (economy or ecology and comfort).
6/7 Well-priced or environmentally friendly? Always convenient for sure! As the operator, you have the choice: the heating system can either function with maximum environmental friendliness or in an especially cost-effective manner. Just make the setting: Hybrid Pro Control does the rest. 1. Economy mode save up to 40 percent heating costs It couldn t be more economical: in economy mode, up to 40 percent of the heating costs can be saved, depending on the energy prices and the system design. 2. Ecology mode a gain for the environment The gain for the environment: in this setting, the system functions with the lowest CO 2 emission per h of generated heat energy. Always convenient for sure! Irrespective of whether economy or ecology mode has been selected, the Convenience mode activates the priority for water heating. Hybrid Pro Control takes care of everything. Even self-generated electricity using photovoltaics When calculating the cheapest operating method, the Hybrid Pro Control energy manager even takes self-generated electricity from a photovoltaic system into consideration. Heat pump electricity price 0.21 /h Gas price 6 ct/h Gas price 8 ct/h On the road or at home: everything is always in control! Even when you are on the road, you have access at all times to your heating and can intervene in its control using the comfort of the Internet. Via smart phone or tablet PC, the free Vitotrol Plus app provides you with secure and easy access. Outside temperature 100% 70% 80% 100% -4 C -2 C 0 C +4 C Outside temperature 20% 80% 90% 100% -4 C -2 C 0 C +4 C Intelligent energy management, for instance with Vitocaldens 222-F: Hybrid Pro Control calculates the outside temperature at which the heat pump can cover the heat requirement. Depending on the current electricity price and with a view towards the highest possible level of efficiency.
Gas or oil hybrid compact appliance
8/9 VITOCALDENS 222-F VITOLACALDENS 222-F Viessmann combines high-efficiency condensing boiler technology with the use of free ambient heat. With the two hybrid compact appliances, the optimum mix of regenerative and conventional energy sources is possible. Constantly fluctuating energy prices make it difficult for the consumer to make the right decision for a heating solution that is both economical and ecological at the same time, and that will endure tomorrow. The hybrid compact appliances now provide a futureproof solution for the modernisation of heating systems. Gas or oil: modernisation with future guarantee Irrespective of whether you previously heated using gas or oil Viessmann provides efficient hybrid compact appliances for both energy sources. Compact dimensions. Powerful for pleasant heating and DHW convenience. And above all, due to the two independent heat generators in the appliance condensing boiler and heat pump flexible enough to also be able to react optimally in the future to developments on the energy markets. You can always rely on their efficiency. For instance, the Vitolacaldens 222-F has been classified with energy efficiency label stage A ++. Energy efficiency label for Vitolacaldens 222-F Take advantage of these benefits High level of operational safety due to two independently operating heat generators Low operating costs by use of the cheapest energy source in each case Compact dimensions of the indoor unit in kitchen grid dimensions Integrated 100- or 130-litre DHW cylinder Future-proof and flexible solution by use of time-variable power tariffs High level of DHW convenience due to condensing peak load boiler Integrated energy-saving high-efficiency pumps Prepared for on-site consumption of photovoltaic current and SmartGrid
Hybrid compact appliances Indoor unit VITOCALDENS 222-F/VITOLACALDENS 222-F 1.3 to 19 /1.3 to 23.5 Heat efficiently using gas or ambient heat: gas hybrid compact appliance Vitocaldens 222-F Vitolacaldens 222-F (left) 2 1 9 1 Oil condensing module with Inox-Radial heat exchanger surface and modulating compact blue flame burner 2 Condenser 3 Vitotronic control with Hybrid Pro Control energy manager 3 4 High-efficiency heating circuit pump 5 DHW loading pump 7 6 5 4 6 3-way reversing valve 7 Heat exchanger for loading system 8 100-litre domestic water primary cylinder (Vitolacaldens 222-F), 130-litre DHW loading cylinder (Vitocaldens 222-F) 8 Vitocaldens 222-F (right) 9 Gas condensing boiler with Inox-Radial heat exchanger surface and modulating MatriX cylinder burner
Hybrid compact appliances Outdoor unit 10/11 Future-proof, economical heating by levering two heating technologies The right unit for everyone: hybrid appliances for gas and oil Hybrid compact appliances from Viessmann are available for both oil and gas: the Vitocaldens 222-F for gas and the Vitolacaldens 222-F for oil. The heat from both appliances is ensured by a powerful condensing boiler and a heat pump. Both systems alternate with each other or supplement each other. Your heating thereby decides automatically which system is more economical or eco-friendly for heating, according to the currently-entered energy prices. Depending on the operating method you have previously set. No wish left unfulfilled: DHW convenience with integrated loading cylinder The DHW loading cylinder with 130-litre volume for gas or 100-litre for oil always provides sufficient hot water even when the demand is high. In the ideal case, the hot water is generated cost-efficiently with the heat pump. Compact, convenient, efficient: indoor and outdoor units Two heat generators, water heaters and all the hydraulic components are integrated into the indoor unit with a footprint of just 0.36 square metres. The watertight outdoor unit can be set up flexibly. Thanks to its compact dimensions, it can be freely erected as required or mounted onto the outer walls. 10 11 12 Outdoor unit 10 Evaporator 11 Fan 12 Compressor
Split air/water heat pump
12/13 VITOCAL 250-S Viessmann also provides the right system for retrofitting of existing condensing boilers using free ambient heat: split air/water heat pump Vitocal 250-S for combination with a wall-mounted or freestanding condensing boiler. Supplementing a heating system for gas or oil with a heating system is ideal. Not just to be future-safe, but also to be environmentally friendly. On the one hand, you therefore use free ambient heat. On the other hand, the heating system can be operated so that the lowest heating costs are always achieved when there are fluctuating energy prices. Choose economy and future-safety Heating systems with an already existing oil or gas condensing boiler up to an output of 30 can be retrofitted with Vitocal 250-S. The Hybrid Pro Control energy manager controls the efficiency of the complete system. Depending on the reference variable selected and according to the current energy costs, either the condensing boiler or the split air/water heat pump provides the heating. Heat and cool with one system If the heat pump does the heating, the outdoor unit withdraws the heat contained in the air and brings it to a flow temperature of 55 C by the heat pump process. But the heat pump can do a lot more. For a high level of living comfort on a hot suer s day, operation of the heat pump can be reversed. Living areas can then be kept comfortable cool. Invertercontrolled compressors and an electronic expansion valve in the refrigeration circuit also ensure a high level of efficiency here. Energy efficiency label for Vitocal 250-S, HAWB-AC 252.A10 Take advantage of these benefits Attractively-priced retrofitting of existing heating systems with a heat pump High level of operational safety due to two independently operating heat generators Greater level of independence from fossil fuels and fluctuating energy prices Lowering of heating costs by the use of free environmental energy Higher level of efficiency and efficient energy utilisation CO 2 -reduced heat generation Prepared for on-site consumption of photovoltaic current and SmartGrid Integrated Vitotronic 200 control with Hybrid Pro Control energy manager automatically determines the most efficient operating method for the selected operating mode
Split air/water heat pump VITOCAL 250-S 3.0 to 11.3 Ideal for retrofitting existing condensing boilers: the Vitocal 250-S split air/water heat pump covers up to 80 % of the energy required in a detached house using free ambient heat and electricity. 1 3 2 4 Vitocal 250-S 5 6 1 Flow monitor 2 Condenser 3 High-efficiency circulation pump 4 3-way mixer 5 Heating circuit/domestic hot water reversing valve 6 Vitotronic 200 control with Hybrid Pro Control energy manager
14/15 The split air/water heat pump Vitocal 250-S supplements already existing freestanding or wall-mounted oil or gas condensing boilers up to 30. Depending on its size, the heat pump itself already outputs up to 11.3. It therefore economically provides the greatest part of the annual heating load in a detached house, up to 80 percent of the energy required for heating and hot water can therefore already be covered by free ambient heat and electricity. Hybrid Pro Control: the right energy mix ensures the highest level of efficiency The Vitotronic 200 control with the Hybrid Pro Control energy manager controls both the heat pump and the condensing boiler. To do this, first select the operating mode with the lowest operating costs or the lowest CO 2 emissions. Depending on the mode you select, the prices entered for oil or gas and electricity, or the respective primary energy factor, are used. According to the output requirements, Hybrid Pro Control optimally adjusts the Vitocal 250-S and the existing heat generators and automatically controls the energy mix. Easily and quickly retrofitted With a width of just 450, the compact indoor unit can even be installed in tight spaces or is simply fixed to the wall. Lateral clearance is not required all components required for maintenance are accessible from the front. The outdoor unit is connected via the refrigerant lines to the indoor unit. Control conveniently with an app The complete system can be controlled very conveniently via the Internet the app for this is available for free for smart phones and tablets. Even more efficient by consumption of self-produced electricity Vitocal 250-S is standard-designed for use of self-produced electricity from a photovoltaic system. The projected power curve of the photovoltaic system and the heat requirement are automatically taken into consideration. If an electricity storage system is then also integrated into the system, the electricity supply from the grid is reduced to a minimum that makes it independent of increasing electricity prices. Use of free ambient heat for heating: the outdoor unit withdraws the heat contained in the air. Vitotronic 200 control with Hybrid Pro Control: very conveniently select between operating methods especially economical or especially friendly to the environment
Technical data Hybrid compact appliances Vitocaldens 222-F gas hybrid compact appliance (Heating) Vitocaldens 222-F Voltage Rated thermal output Heat pump module as per EN 14511, A2/W35 C as per EN 14511, A-7/W35 C Output control as per EN 14511, A2/W35 C Rated thermal output range Gas condensing boiler module 50/30 C 80/60 C Refrigerant circuit Refrigerant Refrigerant charge Global warming potential (GWP) CO 2 equivalent Dimensions of indoor unit Length (depth) Width Height Weight of indoor unit Weight of outdoor unit Type V kg t kg kg HAWB-M 222.A23 230 3.0 3.2 2.0 3.8 3.2 19.0 2.9 17.2 1.20 2.51 595 600 1625 144 43 HAWB-M 222.A26 230 5.6 6.6 1.3 7.7 3.2 19.0 2.9 17.2 2.15 4.50 595 600 1625 144 66 HAWB-M 222.A29 230 7.7 8.7 4.4 9.9 3.2 19.0 2.9 17.2 2.95 6.20 595 600 1625 148 110 HAWB 222.A29 400 7.5 9.5 2.7 10.9 3.2 19.0 2.9 17.2 2.95 6.20 Cylinder capacity l 130 130 130 130 DHW output 17.2 17.2 17.2 17.2 Energy efficiency class* DHW heating: Draw-off Energy efficiency class A++/A+ L A A++/A+ L A A++/A+ L A 595 600 1625 148 113 A++/ A++ L A Vitocaldens 222-F gas hybrid compact appliance (Heating and cooling) Vitocaldens 222-F Voltage Rated thermal output Heat pump module as per EN 14511, A2/W35 C as per EN 14511, A-7/W35 C Output control as per EN 14511, A2/W35 C Cooling output data as per EN 14511 (A35/W18 C, 5 K spread) Rated cooling capacity Coefficient of performance (EER) in cooling mode Rated thermal output range Gas condensing boiler module 50/30 C 80/60 C Refrigerant circuit Refrigerant Refrigerant charge Global warming potential (GWP) CO 2 equivalent Dimensions of indoor unit Length (depth) Width Height Weight of indoor unit Weight of outdoor unit Type V HAWB-M-AC 222.A26 230 5.6 6.6 1.3 7.7 8.8 kg t kg kg 3.35 3.2 19.0 2.9 17.2 2.15 4.50 595 600 1625 144 66 HAWB-M-AC 222.A29 230 7.7 8.7 4.4 9.9 10.0 3.57 3.2 19.0 2.9 17.2 2.95 6.20 595 600 1625 148 110 HAWB-AC 222.A29 400 7.5 9.5 2.7 10.9 8.8 4.46 3.2 19.0 2.9 17.2 2.95 6.20 Cylinder capacity l 130 130 130 DHW output 17.2 17.2 17.2 Energy efficiency class* DHW heating: Draw-off Energy efficiency class A++/A+ L A A++/A+ L A 595 600 1625 148 113 A++/ A++ L A * Energy efficiency class compliant with EC Regulation No. 811/2013 Heating, average climate conditions for low-temperature use LT (35 C)/medium-temperature use MT (55 C)
16/17 Vitocaldens 222-F oil hybrid compact appliance (Heating) Vitolacaldens 222-F Voltage Nenn-Wärmeleistung Wated thermal output Heat pump module as per EN 14511, A2/W35 C as per EN 14511, A-7/W35 C Output control as per EN 14511, A2/W35 C Rated thermal output range Oil condensing boiler module 50/30 C 80/60 C Refrigerant circuit Refrigerant Refrigerant charge Global warming potential (GWP) CO 2 equivalent Dimensions of indoor unit Length (depth) Width Height Weight of indoor unit Weight of outdoor unit Type V kg t kg kg HAWB-M 222.A30 230 5.6 6.6 1.3 7.7 10.3 23.5 9.6 22.0 2.15 4.50 595 600 1625 160 66 HAWB-M 222.A33 230 7.7 8.7 4.4 9.9 10.3 23.5 9.6 22.0 2.95 6.20 595 600 1625 164 110 HAWB 222.A33 400 7.5 9.5 2.7 10.9 10.3 23.5 9.6 22.0 2.95 6.20 Cylinder capacity l 100 100 100 Energy efficiency class* DHW heating: Draw-off Energy efficiency class A++/A+ L A A++/A+ L A 595 600 1625 164 113 A++/A++ L A Heat pump for hybrid appliance Vitocal 250-S split air/water heat pump (Heating and cooling) Vitocal 250-S, Type HAWB-M-AC Vitocal 250-S, Type HAWB-AC Heating output data as per EN 14511 (A2/W35 C) Rated thermal output Coefficient of performance (COP) in heating mode Output control Heating output data as per EN 14511 (A7/W35 C, 5 K spread) Rated thermal output Coefficient of performance (COP) in heating mode Cooling output data as per EN 14511 (A35/W18 C, 5 K spread) Rated cooling capacity Coefficient of performance (EER) in cooling mode Refrigerant circuit Refrigerant Refrigerant charge Global warming potential (GWP) CO 2 equivalent Dimensions of outdoor unit Overall length (depth) Overall width Overall height Dimensions of indoor unit Overall length (depth) Overall width Overall height Total weight Outdoor unit Indoor unit HAWB-M-AC/HAWB-AC 252.A04 252.A05 252.A07 252.A10 3.0 3.3 2.0 3.8 4.5 4.64 4.2 3.72 kg t kg kg 1.20 2.51 290 869 610 360 450 905 43 60 3.7 3.5 1.3 6.5 5.4 4.79 6.3 4.14 2.15 4.50 340 1040 865 360 450 905 5.6 3.24 1.3 7.7 8.4 4.28 8.8 3.35 2.15 4.50 340 1040 865 360 450 905 7.7 3.5 4.4 9.9 10.9 4.62 10.0 3.57 2.95 6.20 340 975 1255 360 450 905 252.A10 252.A13 252.A16 7.5 4.27 2.7 10.9 10.2 5.08 8.8 4.46 2.95 6.20 340 975 1255 360 450 905 9.1 3.7 3.3 12.3 12.1 4.69 12.8 3.72 2.95 6.20 340 975 1255 360 450 905 11.3 3.7 4.6 13.4 15.5 4.10 14.2 3.43 4.20 8.80 Energy efficiency class* A++/A+ A++/A+ A++/A+ A++/A+ A++/A++ A++/A++ A++/A++ 66 60 66 60 110 65 113 65 113 65 340 975 1255 360 450 905 121 65 * Energy efficiency class compliant with EC Regulation No. 811/2013 Heating, average climate conditions for low-temperature use LT (35 C)/medium-temperature use MT (55 C)
System technology Everything from a single source 2 1 3 1 Gas hybrid compact appliance 2 Photovoltaic system 3 Outdoor unit Gas hybrid compact appliances or Vitocal 250 S: at Viessmann, all system components are perfectly matched to each other. Perfectly matched: system technology The convenient controls and the perfectly matched system technology from Viessmann provide you with maximum reliability, flexibility and efficiency. The whole is more than the sum of its parts. According to this motto, Viessmann doesn t just offer single heating components that meet Viessmann s high standards of quality, reliability and efficiency. Rather, all products are incorporated into a completely coordinated system in which all components match each other. Because only a perfect interplay of system-integrated components exhausts the entire performance potential of innovative leading-edge technology. Viessmann system technology includes everything that constitutes a reliable and economic heating system. The Vitotronic control with radio remote control and the powerful Vitocell DHW cylinder for best DHW convenience, right up to high-quality photovoltaic systems for power generation.
18/19 Photovoltaics Make the sun into your energy supplier for electricity. That pays, because solar power can be produced much cheaper now than the delivery costs of power from the grid. Easy-to-use Clear, convenient, intelligent: the Vitotronic control is designed logically and comprehensibly. It ensures perfect functions for fast and exact control of your heating system. Connectivity With Vitoconnect 100 and a smartphone, controlling Viessmann heating systems couldn't be easier. With the ViCare app, you can control simple heating systems. The Vitotrol Plus app allows you to remotely operate complicated heating systems (e.g. with floor heating and solar installations). All apps are available for mobile terminal devices with ios or Android operating systems. System accessories Radiators, pumps, expansion vessels, piping systems, filter and valves the Vitoset program provides you with a complete heating solution. Your advantage: Everything fits together and can be implemented according to your individual requirements using just one system. And with high-quality, tested materials and perfectly manufactured. Additional information on the Viessmann accessories is available here.
Service Our specialist partners In the best hands of our specialist partners Our close cooperation with our specialist partners is the basis for success for Viessmann. You also profit from their knowledge, when you decide on heating equipment from Viessmann. You receive consultation, sales, assembly and customer service exclusively from Viessmann s trade partners, who we train regularly and who have a thorough knowledge of our products. Profit from the extensive range of service of our specialist partners! German TÜV-certified: the building energy-savings check from Viessmann With the building energy-savings check, individual possibilities for modernisation and savings can be easily and quickly determined. With total objectivity. Because the calculation in this program is certified by the TÜV Rheinland, Germany. Take the quick check at www.check-energiesparen.de. Your specialist engineering company will then advise you in detail.
20/21 A glance at some examples of the service you receive from your trade partner Free, non-binding and individual consultation, even directly on-site Clear calculation of the savings in heating costs by modernisaiton of your heating system naturally also combined with solar collectors Calculation of the amortisation time after which the heating has paid for itself due to energy cost savings Determination of the actual heat and DHW requirement for your household or property Information on the economic combination of new heating and solar systems for backup heating and DHW heating Current information on state subsidy prograes from which your new heating and solar system can be subsidised Support when applying for subsidies Attractive financing: invest now and save heating costs With the financing model from Viessmann, you can start saving iediately and achieve your plans. Our unbureaucratic, fast and reliable handling facilitates your modernisation, and you remain flexible in your financial planning. Your special advantage: with Viessmann s favourable conditions, heatingcost savings are normally much higher than your costs of financing. Please note: The subsidy and financing applications must be made before purchase of the heating and/ or solar system. A subsequent subsidy or financial agreement is not possible. You can get detailed information on the Viessmann financing model from your local trade partner. Conditions that are really something special Those investing in a new heating system for their property receive a favourable financing offer from Viessmann in cooperation with the Creditplus Bank: just 3.99 percent* effective annual interest. * For a runtime of 24 months Your cost advantage: technology from Viessmann, subsidies from the state With heating systems from Viessmann, you don t just save on operating costs. Energy-saving, environmentally-friendly heating technology is financially supported at the national, federal and local level as well as by energy providers. Inform yourself therefore about the various subsidy prograes. Current information on this is available on the Internet at www.viessmann.de/foerderprograe The economic efficiency analysis for your home: the building energy savings check is available at www.check-energiesparen.de.
Viessmann Group
22/23 The company Viessmann is one of the leading international manufacturers of efficient heating, industrial energy and refrigeration systems. Acting in a sustainable manner As a family business Viessmann takes the long view and places great value on acting responsibly; sustainability is firmly enshrined in the company's principles. For Viessmann, sustainability in action means striking a balance between economy, ecology and social responsibility throughout the company; meeting current needs without compromising the quality of life of future generations. With its strategic sustainability project, Viessmann demonstrates at its own head office in Allendorf (Eder) that the energy and climate policy goals set by the German government for 2050 can in fact be achieved today with the help of coercially available technology. The Viessmann comprehensive range As environmental pioneer and technological trailblazer for the heating sector, Viessmann has for decades been supplying exceptionally clean and efficient systems for heating, refrigeration and decentralised power generation. Many of the company's developments are recognised as heating equipment milestones. Practical partnership As part of its comprehensive range, Viessmann also offers a wide selection of complementary services. These services include a comprehensive training and further development prograe for trade partners at the well equipped training facilities of the Viessmann Academy. With its new digital services, Viessmann offers innovative solutions such as the operation and monitoring of heating systems by smartphone. Users benefit from greater reassurance and convenience, whilst contractors can keep a constant eye on the systems for which they are responsible. German Sustainability Award for Production/Brand/Resource Efficiency Energy Efficiency Award Viessmann Group Company details Established in: 1917 Employees: 11,600 Group turnover: 2.22 billion euros Export share: 56 percent 22 production companies in 11 countries 74 countries with sales companies and branches 120 sales offices worldwide The comprehensive product range from the Viessmann Group Boilers for oil or gas Combined heat and power generation Hybrid appliances Heat pumps Wood combustion technology Biogas production plants Biogas upgrading plants Solar thermal Photovoltaics Accessories Refrigeration systems
Viessmann Werke GmbH & Co. KG 35107 Allendorf (Eder) Telephone +49 (0)6452 70-0 Fax +49 (0)6452 70-2780 www.viessmann.com Your trade partner: 9442 830-1 GB 02/2017 Copyright protected content Duplication and alternative use only with prior written consent. Subject to modifications.