Electric Blanket Operating Instructions With Mattress Protector FOR GOLDAIR GUB SERIES ELECTRIC BLANKETS
General Care and Safety Guide To obtain maximum benefit from your Goldair Electric Blanket please read the instruction manual carefully and ensure this is understood before using the product. 1. Before using the blanket, make sure the power supply is 230-240V, AC, 50Hz. 2. Do not use an extension cord, power board or external timer with this product. 3. Do not use if the blanket has a damaged cord as this may lead to overheating or personal injury. 4. Do not use heavy or dense over blankets as they may lead to overheating of the electric blanket. 5. Do not trap or fold cords between bed slats, mattress, or springs, or against walls, headboards or bed frame as this may cause damage to the cord. 6. Do not use the blanket on a bed used by an infant, incapacitated person, paraplegic, quadriplegic, diabetic, anyone sensitive to heat or someone who can not clearly understand the instruction and/or operate the controls. 7. The product is not to be used by young children unless the controls have been preset by a parent or guardian or unless the child has been adequately instructed on how to operate the controls safely. 8. This product is not intended for medical use in hospitals. 9. If you find any damage with your blanket, disconnect the appliance from the power supply immediately and contact your nearest authorised service agent. 10. Do not use this product on a damp mattress or on a water bed. 11. Do not use on an adjustable bed. 12. Do not pinch, flex, or expose the heating wire. Damaged heating wire may cause a fire hazard or personal injury. 13. Keep the control unit away from an open window. 14. Turn off the blanket and disconnect the power cord when not in use. 15. Do not dry clean the blanket. Do not use bleach or harsh cleaning fluids as the cleaning liquid may damage the insulation of the heating element. 16. Do not use any pins, needles, safety pins or other sharp items on your electric blanket as they will damage the electric wiring. 17. Keep all dogs, cats, and other pets away from the product. 18. Do not tuck in the blanket as this may cause over heating and/or fire. 19. The blanket can be used only with the control unit provided by the manufacturer. Any other control unit may cause overheating and/or fire. 20. Do not unplug the product by the power cord while in use. Always turn the power off at the power outlet before you remove the plug. Remove by grasping the plug; do not pull on the cord. TECHNICAL SPECIFICATION Model No s: GUB-LS,GUB-Q,GUB-K Power Supply: 230-240V, 50Hz AC only Power: LS Model 60W Q/K Models 2 x 60W
Overview of your Goldair Electric Blanket Your Goldair Electric Blanket is equipped with a 3 heat control. Two controls are supplied with the Queen, and King size Electric Blanket. 3 HEAT CONTROL The control features a rotary switch to adjust the heat setting, plus a setting indicator light for easy adjustment in the dark. 1 Low, gentle heat 2 Medium Heat 3 High Heat BEFORE FIRST USE Before using your electric blanket for the first time; The blanket needs to be unfolded and laid flat before switching on. we recommend that you switch your blanket to the maximum setting for two to three hours before bedtime then reduce to your desired heat setting when sleeping. STORING YOUR BLANKET Always allow the blanket to cool before storing. Your blanket can remain on the bed all year round as a comfortable underblanket. Simply remove the controls and store until winter. If you wish to remove the blanket from your bed when not in use, roll or fold it loosely and store in a blanket bag or the bag it was supplied in. Avoid pressing sharp creases into the blanket. EVERYDAY USE With normal use your electric blanket will require 15 minutes of preheating on the maximum setting before bedtime. We recommend that you turn the blanket down to Low or off when sleeping.
Fitting your Goldair Electric Blanket FITTED BLANKETS FEATURES AND BENEFITS Fitted Design - the fitted skirt is elasticated to keep the blanket flat and taut on the mattress and makes it easier to fit and remove from the bed. Machine Washable - the detachable controls and waterproof element make your electric blanket safe to machine wash and tumble dry. For instructions on how to launder your Goldair Electric Blanket refer to Care & Cleaning section. 3 Heat Control - a choice of 3 heat settings allows you to select the desired temperature to keep you comfortable all night. Detachable Controls - remove the controls when laundering your blanket. Dual Controls - Double, Queen and King Electric Blankets feature two controls for personalised heating. FITTING YOUR GOLDAIR FITTED ELECTRIC BLANKET Place the electric blanket on the mattress with the skirt on top of the blanket. Ensure the end of the blanket with controls is at the top end of the bed. See Fig 3. Fig 3. Once the blanket is in the correct position fit the skirt over the mattress. Fig 4. Connect the control units into the socket's on the blanket and plug into a power point and turn on. The cord and control switches must be kept outside the bed and away from external heating sources, such as heaters or bedside lamps.
Care and Cleaning of your Goldair Electric Blanket CARE & CLEANING OF YOUR ELECTRIC BLANKET Your Goldair Electric Blanket with Mattress Protector comes with a removable top cover which can be washed and dried without having to remove the rest of the blanket from the bed. Taking care of your electric blanket is easy and safe as long as you follow the steps outlined below: DO NOT dry clean your blanket. Dry cleaning will damage the wiring. DO NOT use bleach or cleaning fluids. DO NOT use a wringer. DO NOT iron the blanket. DO NOT turn on the blanket until it is completely dry. DO NOT use mothballs or sprays of any kind. SPOT CLEANING Unplug and remove the control units. Wet sponge the effected area using a mild soap and lukewarm water solution. Ensure the water temperature is less than 30. Gently sponge the effected area with clean water. Use a neutral colored towel to absorb excess water. HAND WASHING Do not allow the control unit or power plug to come into contact with any water. Fold and presoak the blanket for 15 minutes in a mild soap and lukewarm water solution. Ensure the water temperature is less than 30. Gently squeeze the soap suds through for a few minutes. Rinse in fresh lukewarm water. MACHINE WASHING (BLANKETS WITH DETACHABLE CONTROLLERS ONLY) Unplug and remove the control units. Fold and presoak the blanket for 15 minutes in a mild soap and lukewarm water solution. Ensure the water temperature is less than 30. Wash in mild soap and lukewarm water on the delicate or gentle cycle for 2 minutes. Rinse in fresh lukewarm water. AIR DRYING Gently stretch the blanket to its original size. Air dry over a clothes line or shower rod. (DO NOT use clothes pegs or clips of any kind). DO NOT use the blanket until it is completely dry. PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. (Refer to back of booklet). SUPPORT AND TECHNICAL ADVICE North Shore City, Auckland, New Zealand Monday Friday 8am-5pm Phone: 0800 232 633 Website: www.goldair.co.nz
Two Year Warranty Your Goldair product has been inspected and tested and is guaranteed subject to the following for a period to two years from the date of purchase against defects in workmanship and materials. During this period, such defects will be rectified by repair or replacement of the product purchased. Your product contains no user serviceable components and this warranty becomes invalid if in our opinion the product has been misused, abused, incorrectly installed, tampered with, connected to an electrical supply not corresponding with the name plate specification, or subjected to power surges. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. Normal wear and tear is expressly excluded. If your Goldair product fails to operate satisfactorily, please return it to the retailer from whom it was purchased. To obtain a repair or replacement product under this warranty, you will need to produce satisfactory evidence of date of purchase. The completed warranty and purchase receipt must be presented with the product. The warranty should be filled out at the time of purchase. It is in your interest to make sure this is done. If the product is to be replaced (cannot be repaired) then that replacement will be of the same or similar product or accessory excluding packaging, instruction card etc. Where a replacement product is supplied, this shall be guaranteed for the balance of the original warranty period. Any model that is no longer available will be replaced by a model of a value and with such features as we consider appropriate in the circumstances. Goldair is not responsible for freight forwarding charges, losses or damage in transit. If service is required after the warranty period has expired, the product should be returned to a qualified electrical technician. Service outside of the warranty period will be at your cost. Consumers Guarantee Act (1993). In accordance with the above act consumers are advised that: The manufacturer does not undertake that repair facilities and parts are necessarily available for this product. If any of the provisions of the foregoing are contrary to any relevant legislation, then that provision shall be deemed to be excluded from the warranty and the rest of the provisions will continue to apply. IMPORTANT: Please retain this warranty card Name Address Purchased from Date of purchase. Name of product Suburb Model no