Λευκωσία, 14 Ιουνίου ΘΕΜΑ: May 2016 Notification Procedure 1025/2012. Κυρία/Κύριε,

Λευκωσία, 14 Ιουνίου 2016 ΠΡΟΣ Όλα τα Μέλη ΘΕΜΑ May 2016 Notification Procedure 1025/2012 Κυρία/Κύριε, Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό ιοίκησης και ιεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Αναπλ. ιευθυντής Τμήματος Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα ιγενή 38 & εληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail meropi@ccci.org.cy, Ιστοσελίδαwww.ccci.org.cy

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Register issued on 2016-06-03 A list of subsectors can be found at the end of this document.

Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector A SERVICES Register issued on 2016-06-03

Subsector A01 TOURIST SERVICES Page 3 Subsector A01 Registration Date 2016-05-27 UNMZ Draft Issue Date 2016-05-31 Czech Republic Latest Date for Comments 2016-06-30 ID 76000416/0001 ICS Tourism services - Classification of accommodation establishments - Category hotel, hotel garni, pension, motel and boatel (accommodation in cabins of the permanent mooraged passenger ship) This standard establishes condition for classification of accommodation establishment (category hotel, hotel garni, pension, motel and boatel). The requirements for classification are in conformity with requirements of other European countries. After the first stage of system functioning in the years 2010-2012, it was necessary to assess possible improvements. Based on this assessment, it was decided to make partial modifications in the classification for category of pension REV/AMD CSN 76 1110(2013) Subsector A03 POSTAL SERVICES Subsector A03 Registration Date 2016-05-27 ISS Serbia Latest Date for Comments 2016-07-26 ID 00048883/0001 Draft for public enquiry ICS nasrps A.L3.0012016 Address system - Model for data exchange This standard defines the general principles of address system at the national level. Standard defines the content and structure of the addressing style for the exchange, which ensures that data on the physical address exchange in a unique way. This standard defines the basic rules and procedures for the establishment of harmonized data sets on physical addresses, which provides unambiguous identification of objects and / or part of an object in space. This standard is general and is applicable to all organizations and all stakeholders of the social system of information that the scope of its work provide components address register, keep records of the physical address or data users address system. The standard allows easier exchange of address information between entities. Subsector A06 BUILDING AND CONSTRUCTION SERVICES Subsector A06 Registration Date 2016-05-04 SNV Draft Issue Date 2016-05-02 Switzerland Latest Date for Comments 2016-06-24 ID CH160005/0001 Draft for public enquiry

Page 4 ICS 91.010.01 prsn 506500 Building cost classification BCC REV/AMD SN 506 5002001; SN 506 5042003 Subsector A99 UNDETERMINED Subsector A99 Registration Date 2016-05-30 UNI Italy ID 01601752/0001 ICS 03.040 UNI1601752 Non regulated professions Operators working in planning and compliance of companies, associations and bodies of banking, financial and insurance sectors Knowledge, skill and competence requirements The standardization activity is aimed at defining, for each professional profile identified, the requirements of the compliance officer, i. e. the knowledges, skills and competences necessary to carry out the profession, which involves the whole company activity. ** End of Sector **

Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector B BUILDING AND CONSTRUCTION Register issued on 2016-06-03

Subsector B01 FIRE PROTECTION Page 6 Subsector B01 Registration Date 2016-05-02 AFNOR France ID 00196022/0001 ICS PR NF S 61-111 Fire fighting hose assemblies - Assembling requirements for hoses and couplings and tests Subsector B01 Registration Date 2016-05-02 AFNOR France ID 00196023/0001 ICS PR NF S 61-112 Fire-fighting hoses - Flexible delivery hoses of diameters 25-45 - 70-110 - 152 Subsector B01 Registration Date 2016-05-17 DIN Germany ID 03101049/0001 ICS 01.080.20 DIN 14033/A1 Symbolic abbreviations for fire brigade; Amendment A1 Subsector B02 STRUCTURES Subsector B02 Registration Date 2016-05-23 ASI Austria ID 00026801/0001 ICS 91.010.30 ÖNORM B 1600/A Accessible built environment - Design principles The provisions of the present Standard shall be applied to new constructions, rebuildings and annexes intended to provide barrier-free buildings and installations.

Page 7 Subsector B02 Registration Date 2016-05-02 AFNOR France ID 00195915/0001 ICS PR NF DTU 58.1 P1-1 Building works - Suspended ceilings - Part 1-1 Contract bill of technical model clauses Subsector B02 Registration Date 2016-05-02 AFNOR France ID 00195916/0001 ICS PR NF DTU 58.1 P2 Building work - Suspended ceilings - Part 2 Contract bill of special administrative model clauses Subsector B02 Registration Date 2016-05-02 AFNOR France ID 00195917/0001 ICS PR NF DTU 58.1 P1-2 Building works - Suspended ceilings - Part 1-2 General criteria for selection of materials Subsector B02 Registration Date 2016-05-02 AFNOR France ID 00196203/0001 ICS PR NF P94-261/A1 Geotechnical design Shallow foundations

Subsector B03 CONCRETE Page 8 Subsector B03 Registration Date 2016-05-02 LVS Draft Issue Date 2016-05-05 Latvia Latest Date for Comments 2016-07-07 ID 00058718/0001 ICS 91.100.30 LVS 156-1 Concrete - National annex of Latvian standard to European standard EN 2062013 Concrete - Specification, performance, production and conformity The standard contains national provisions for the concrete specifications, which have to be considered assessing suitability of the concrete for the construction in climatic conditions of Latvia. The provisions of the standard are based on the provisions of the European Standards for concrete as well as constituent materials and it shall be used together with those standards. This standard is only operable together with LVS EN 206. This standard contains test methods for determination of the freeze/thaw resistance. The standard contains provisions for the conformity assessment of the concrete in Latvia. REV/AMD LVS 156-1 Subsector B03 Registration Date 2016-05-17 DIN Germany ID 00517707/0001 ICS 00517707 Sealing of joints in concrete with waterstops Subsector B03 Registration Date 2016-05-30 PKN Poland ID 27401119/0001 ICS 91.100.30 prpn-b-06265p Concrete - National Annex to PN-EN 2062014-04 This document sets out additional requirements for the constituent materials of concrete cement, aggregate, water and additives. It also specifies the additional requirements and tests for hardened concrete - ordinary freeze/thaw resistance, freeze/thaw resistance in the presence of de-icing salts, resistance to penetration of water under pressure. Additional concrete consistency classes and exposure classes for risk of abrasion were also specified Subsector B05 FIRE TESTS

Subsector B05 Registration Date 2016-05-09 NEN Netherlands ID 50001963/0001 ICS 29.240.01, 91.140.50 NTA 82202016 Concept nl Periodical fire risk assessment of low voltage electrical installations and work equipment Periodical fire risk assessment of low voltage electrical installations and work equipment Page 9 Subsector B06 GYPSUM Subsector B06 Registration Date 2016-05-25 BDS Bulgaria Latest Date for Comments 2016-07-15 ID BG004003/0001 Draft for public enquiry ICS 91.100.10 Gypsum rocks for manufacture of gypsum binders and cement Specifications and test methods The standard refers to the characteristics, requirements and classification of gypsum rocks represented mainly by gypsum used as raw material in the production of gypsum binders or as an additive in the production of cement and other binders. The standard includes test methods for determining the characteristics of gypsum rocks and terms of delivery. International Modified ISO 15871975 Subsector B08 DOORS AND WINDOWS Subsector B08 Registration Date 2016-05-02 AFNOR France ID 00196123/0001 ICS PR NF P26-329 Building hardware - Handling and/or closing devices for doors and door height windows Subsector B09 THERMAL MATTERS Subsector B09 Registration Date 2016-05-17 DIN

Page 10 Germany ID 00517693/0001 ICS 00517693 Thermal insulation and energy economy in buildings - Part 4 Hygrothermal design values Subsector B14 GEOTECHNICS Subsector B14 Registration Date 2016-05-17 DIN Germany ID 00517716/0001 ICS 00517716 Subsoil - Calculation of earth-pressure Subsector B15 SANITARY APPLIANCES Subsector B15 Registration Date 2016-05-30 SNV Draft Issue Date 2016-05-17 Switzerland Latest Date for Comments 2016-08-31 ID CH160006/0001 Draft for public enquiry ICS 13.060.30 prsia 190 Sewerage systems REV/AMD SIA 1902000 Subsector B15 Registration Date 2016-05-30 SNV Draft Issue Date 2016-05-17 Switzerland Latest Date for Comments 2016-08-31 ID CH160007/0001 Draft for public enquiry ICS 13.060.30 prsia 118/190 General conditions for sewerage systems REV/AMD SIA 1902000

Subsector B17 LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Page 11 Subsector B17 Registration Date 2016-05-30 UNI Italy ID 01601781/0001 ICS 17.180.20, 93.080.40 UNI1601781 Light and lighting - Road tunnel lighting The standard specifies the requirements for road tunnel lighting installations in order to ensure the driver, both in daytime and in night-time, the entry, passing through and exit of the covered stretch at the maximum allowed speed, with safety degrees not lower than those of the pertinent road and in adequate visual comfort conditions. REV/AMD UNI 110952011 Subsector B17 Registration Date 2016-05-17 DIN Germany ID 05800816/0001 ICS 17.180.20 DIN 5032-7 Photometry - Part 7 Classification of illuminance meters and luminance meters Subsector B17 Registration Date 2016-05-17 DIN Germany ID 05800817/0001 ICS 17.180.20 DIN 5032-8 Photometry - Part 8 Data-sheet for illuminance meters Subsector B17 Registration Date 2016-05-09 NEN Netherlands ID 50001965/0001 ICS 93.080.40 NPR 132012016 nl Public lighting - Part 1 Quality criteria In this NPR 13201 classifications for public lightning are defined in relation to the visual needs of road users. The classifications are linked with technical aspects of road use and traffic behaviour in different traffic situations. Also esthetical aspects, visual comfort and

Page 12 environmental aspects are treated in a separate chapter. Subsector B20 DRAINAGE EQUIPMENT Subsector B20 Registration Date 2016-05-23 ASI Austria ID 00026794/0001 ICS 13.060.30, 93.030 ÖNORM B 5016 Earthworks for water and sewage pipelines for community systems and industry - Quality assurance of compaction works This standard is applicable for the quality assurance of compaction works during earthworks for pipes in pipe trenches and dams and in a soil replacement (according to ÖNORM B 2503 and ÖNORM B 2538 and ÖNORM EN 805, ÖNORM EN 1610 and ONR CEN / TR 1046). In particular the standard applies to the quality assurance of the compaction in the embedment. Subsector B25 GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector B25 Registration Date 2016-05-30 UNI Italy ID 01601648/0001 ICS 91.060.40 UNI1601648 Gas plants for civil use fed by network distribution Systems for evacuation of combustion products, connected to gas appliances Evaluation criteria, renewal and renovation. This standard defines criteria for functionality evaluation of gas plants for civil use fed by network distribution, connnected to gas appliances. This standard specifies criteria for renewal and renovation of existing systems for evacuation of combustion products. REV/AMD UNI 108452000 Subsector B25 Registration Date 2016-05-09 NEN Netherlands ID 50001964/0001 ICS 23.040.20, 75.200,

Page 13 91.140.40 NEN 7244-22016 Concept nl Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2 Specific functional requirements for polyethylene (MOP up to and including 10 bar) Describes the specific functional recommendations for polyethylene (PE) pipelines in addition to the general functional recommendations of EN 12007-1 focussed on the Dutch situation. Subsector B26 ROAD BUILDING AND MAINTENANCE Subsector B26 Registration Date 2016-05-19 UNMS Slovakia ID 73602116/0001 ICS 19.060 Evaluation of skid resistance of pavement surface This revision of national standard specifies the requirements for skid resistance parameters of pavements surface (asphalt concrete and cement concrete) in connection with the European standards series EN 13036 introduced into the system of Slovak technical standards, as well as applicable national law. This standard supersedes the national standard STN 73 6195 1974 and amendment STN 73 6195/Z1 2006. REV/AMD STN 75 6195 Subsector B27 WATERPROOFING MATERIALS Subsector B27 Registration Date 2016-05-12 UNMZ Draft Issue Date 2016-05-30 Czech Republic Latest Date for Comments 2016-06-30 ID 73007913/0001 Draft for public enquiry ICS Designing of roofs - Basic provisions This standard specifies the technical requirements and design principles for roof. REV/AMD ČSN 73 1901 Subsector B28 FLOOR COVERINGS Subsector B28 Registration Date 2016-05-02 AFNOR

France ID 00195918/0001 ICS PR NF DTU 54.1 P1-1 Building works - Cast in situ synthetic resin flooring - Part 1-1 Contract bill of technical model clauses Page 14 Subsector B29 AGGREGATES Subsector B29 Registration Date 2016-05-02 AFNOR France ID 00196052/0001 ICS PR NF X46-020 Asbestos survey - Survey of materials and products containing asbestos in buildings - Mission and methodology Subsector B32 PRECAST CONCRETE PRODUCTS Subsector B32 Registration Date 2016-05-23 ASI Austria ID 00026802/0001 ICS 91.090, 91.100.30 ÖNORM B 3260 Precast concrete products - Precast concrete garages - Requirements for monolithic reinforced concrete garages or reinforced concrete garages composed of room elements - National specifications to ÖNORM EN 13978-1 The following ÖNORM has to be applied together with ÖNORM EN 13978-1 for precats concrete garages. For the CE-Marking the rules accordung ÖNORM EN 13978-12005, annex ZA are applicable. The provisions of this ÖNORM will be used together with the requirements of EN 13978-1 ÖNORM for testing and tendering. Subsector B99 UNDETERMINED Subsector B99 Registration Date 2016-05-17 DIN Germany

Page 15 ID 00517726/0001 ICS 00517726 Waterproofing for indoor applications - Part 5 Waterproofing with waterproofing materials in panel-shaped form in conjunction with tiles and paving Subsector B99 Registration Date 2016-05-03 BSI United Kingdom ID 01601174/0001 ICS BS 1722-14 Fences. Part 14 Specification for open mesh steel panel Subsector B99 Registration Date 2016-05-30 SN Norway ID NOT16005/0001 Draft for public enquiry ICS 13.220.20 prns 3961 Voice alarm systems Design, installation, commissioning, operation and maintenance Design, installation, commissioning, operation and maintenance of voice alarm systems ** End of Sector **

Information procedure Page 16 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector C CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on 2016-06-03

Subsector C01 Food products Page 17 Subsector C01 Registration Date 2016-05-02 AFNOR France ID 00195945/0001 ICS PR NF V29-001 Soya derivatives. Soya juice and soya juice based products Subsector C01 Registration Date 2016-05-30 UNI Italy ID 01601753/0001 ICS 67.060 UNI1601753 Rice Determination of vitreous and non vitreous kernels (with pearl) This standard specifies a method for the determination of vitreous kernels. The method is applicable to non-parboiled milled rice. The Annex also contains a criteria for the classification of nonvitreous kernels, assessing the type of pearl present in them. Subsector C01 Registration Date 2016-05-02 MSZT Hungary ID 60301601/0001 ICS 67.040, 67.040 MSZ 6950-3 Mircoscopical examination of honey REV/AMD MSZ 6950-31977 Subsector C01 (Secondary Subsector) MSZT Hungary ID 60301601/0001 ICS 67.040, 67.040 MSZ 6950-3 Mircoscopical examination of honey Registration Date 2016-05-02

Page 18 REV/AMD MSZ 6950-31977 Subsector C01 Registration Date 2016-05-02 MSZT Hungary ID 61201601/0001 ICS 67.240, 67.240 MSZ 9681-2 Sensory analysis of ground paprika REV/AMD MSZ 9681-21984 Subsector C01 (Secondary Subsector) MSZT Hungary ID 61201601/0001 ICS 67.240, 67.240 MSZ 9681-2 Sensory analysis of ground paprika Registration Date 2016-05-02 REV/AMD MSZ 9681-21984 Subsector C01 Registration Date 2016-05-02 MSZT Hungary ID 61201602/0001 ICS 67.240, 67.240 MSZ 157 Sensory analysis of honey REV/AMD MSZ 1571982 Subsector C01 (Secondary Subsector) MSZT Hungary ID 61201602/0001 ICS 67.240, 67.240 MSZ 157 Sensory analysis of honey Registration Date 2016-05-02

Page 19 REV/AMD MSZ 1571982 Subsector C01 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0045735/0001 Draft for public enquiry ICS PNE 195006 Responsible fishing tuna This standard establishes the requirements for freezer tuna seiner vessels, whether Spanish or foreing flag, in tuna responsable fishing. Subsector C01 (Secondary Subsector) Registration Date 2016-05-10 ID t0109668/0001 ICS 55.040, 67.240 Sensory analysis Testing of packaging materials and packages for food products This standard specifies a sensory analysis method for packaging materials and packages for food products to assess their compatibility with food products. European Identical to DIN 109552004 Subsector C02 PAINTS AND RELATED PRODUCTS Subsector C02 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0045713/0001 Draft for public enquiry ICS PNE 48295 Paints and varnishes. Micaceous-oxide undercoat epoxy paint. This standard describes a top coating to protect structural steel. REV/AMD UNE 482952003 Subsector C02 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18

Page 20 ID P0045715/0001 Draft for public enquiry ICS PNE 48278 Paints and varnishes. Tar free high built-epoxy coating. It describes a coating for protection of structural steel and concrete. REV/AMD UNE 482782005 Subsector C02 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0045716/0001 Draft for public enquiry ICS PNE 48277 Paints and varnishes. Zinc rich epoxy primer. It describes a zinc rich epoxy primer for protection of structural steel. REV/AMD UNE 482772005 Subsector C02 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0045717/0001 Draft for public enquiry ICS PNE 48272 Paints and varnishes. Repaintable undercoat epoxy paint. It describes the requirements of a coating suitable as an undercoat to protect steel. REV/AMD UNE 482722003 Subsector C03 CHEMISTRY Subsector C03 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0044992/0001 Draft for public enquiry ICS PNE 84097 Cosmetic raw materials. Sodium alkyl ether sulfate 70%. This standard includes the specifications required by the sodium alkyl ether sulfate 70% in cosmetics uses. REV/AMD UNE 840972007

Page 21 Subsector C03 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0044993/0001 Draft for public enquiry ICS PNE 84096 Cosmetic raw materials. Sodium alkyl ether sulfate 27%. This standard includes the specifications required by the sodium alkyl ether sulphate 27% in cosmetics uses. REV/AMD UNE 840962007 Subsector C03 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0044997/0001 Draft for public enquiry ICS PNE 84137 Cosmetic raw materials. Coconut monoethanolamide. This standard includes the specifications required by the Coconut monoethanolamide in cosmetics uses. REV/AMD UNE 841372008 Subsector C03 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0045462/0001 Draft for public enquiry ICS PNE 84076 Cosmetic raw materials. Ethanol. Quantification of mixtures of synthetized and fermented ethyl alcohol. Radiometric method. This standard includes the specifications required by the Ethanol, the quantification of mixtures of synthetized and fermented ethyl alcohol by the radiometric method. REV/AMD UNE 840761992 Subsector C03 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0045765/0002 Draft for public enquiry ICS PNE 84070 Cosmetic raw materials. Ethyl alcohol This standard sets the general characteristics and specifies the assay methods corresponding to ethanol used as a raw material in cosmetic formulations. This standard is applicable to

Page 22 ethanol without any kind of denaturant. REV/AMD UNE 840701992 Subsector C06 ESSENTIAL OILS Subsector C06 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0044988/0001 Draft for public enquiry ICS PNE 84006 Cosmetic raw materials. Glyceryl stearate. This standard includes the specifications required by the Glyceryl stearate in cosmetics uses. REV/AMD UNE 840062003 Subsector C18 ADHESIVES Subsector C18 Registration Date 2016-05-30 UNI Italy ID 01601751/0001 ICS 83.180 UNI1601751 Adhesives Determination of water-soluble chromates in cement-based adhesives by ion chromatography The standard specifies a method to determine water-soluble hexavalent chromium [Cr(VI)] by ion chromatography between 0,01 mg/kg (ppm) and 20 mg/kg (ppm) REV/AMD UNI 112272008 Subsector C21 COSMETICS Subsector C21 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0044589/0002 Draft for public enquiry ICS PNE 84762 Cosmetic raw materials. Plant extracts. Determination of triterpene derivatives by HPLC The purpose of this standard is to describe the analytical procedure available for identification of triterpens by HPLC.

Page 23 REV/AMD UNE 847622009 Subsector C99 UNDETERMINED Subsector C99 Registration Date 2016-05-20 EVS Estonia ID 00090875/0001 ICS 67.060 prevs 727 Cereal products - Determination of metallomagnetic admixture This Estonian standard specifies a methods for the determination of magnetic metal admixture in cereal products (flour, groats and brans). Subsector C99 Registration Date 2016-05-20 EVS Estonia ID 00090876/0001 ICS 67.060 prevs 730 Cereal products - Determination of particle size, admixture content and sound kernels in croats This Estonian standard specifies a method for the determination of particle size in flours, brans, groats (including polished pea) and admixture and sound kernels in groats. ** End of Sector **

Information procedure Page 24 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector F FUNDAMENTAL STANDARDS Register issued on 2016-06-03

Subsector F02 UNITS & SYMBOLS Page 25 Subsector F02 Registration Date 2016-05-23 ASI Austria ID 00026795/0001 ICS 01.060, 17.180.01 ÖNORM A 6437 Quantities and units - Light and other optical radiations - Supplementary provisions to ÖNORM EN ISO 80000-7 This ÖNORM specifies terms, symbols and definitions of quantities and units for light and other optical radiations and terms of colorimetry determined which are not part of ÖNORM EN ISO 80000-7. Subsector F04 SIEVES Subsector F04 Registration Date 2016-05-23 ASI Austria ID 00026808/0001 ICS 19.120 ÖNORM ISO 3310-2 Test sieves - Technical requirements and testing - Part 2 Test sieves of perforated metal plate This ÖNORM specifies the technical requirements and corresponding test methods for test sieves of perforated metal plate. It applies to test sieves having round holes, with sizes from 125 mm down to 1 mm, or square holes, with sizes from 125 mm down to 4 mm, in accordance with ISO 565. Subsector F05 MEASURING INSTRUMENTS Subsector F05 Registration Date 2016-05-30 UNI Italy ID 01601650/0001 ICS 91.140.40 UNI1601650 Gas meters with metering pressure not greater than 0,07 bar Criteria for metrological verification The standard defines a) the requirements to carry out metrological verification of the meter in the laboratory and at the end user; b) the technical operational procedure to be applied to carry out metrological verification of the meter at the end customer and the method of calculating the measurement error;

Page 26 c) the characteristics of the measuring equipment necessary to carry out the metrological verification; d) the procedure for removal and transport to the laboratory; e) the requirements of laboratories in which to effect the metrological verification of the meter. It applies to all meters for measuring gas of the second and third family, performing the measurement at a pressure not greater, respectively of 0.04 bar (0.4 kpa) for natural gas, and 0.07 bar (0.7 kpa) for mixtures of LPG. REV/AMD UNI 110032013 Subsector F12 INFORMATION PROCESSING SYSTEMS Subsector F12 Registration Date 2016-05-02 AFNOR France ID 00196116/0001 ICS PR NF P99-200/A2 Road traffic control - Road traffic lights - Technical specifications - Part R12PPS Subsector F12 Registration Date 2016-05-02 AFNOR France ID 00196117/0001 ICS PR NF P99-050 Road traffic control. Traffic signalled juction. Principles of maintenance Subsector F12 Registration Date 2016-05-02 AFNOR France ID 00196119/0001 ICS PR NF P99-060 Road traffic control. Traffic signalled junction. Implementation conditions of equipment

Subsector F14 GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES Page 27 Subsector F14 Registration Date 2016-05-17 DIN Germany ID 01700029/0001 ICS 37.100.01 DIN 16611 Printing technology - Measures for screen printing Subsector F14 Registration Date 2016-05-17 DIN Germany ID 01700030/0001 ICS 01.040.37 DIN 16528 Printing technology - Terms for gravure printing Subsector F14 Registration Date 2016-05-17 DIN Germany ID 01700031/0001 ICS 01.040.37 DIN 16610 Printing technology - Porous printing - Terms for screen printing Subsector F20 QUALITY ASSURANCE Subsector F20 Registration Date 2016-05-02 AFNOR France ID 00196120/0001 ICS PR NF V01-005 Quality management system for agricultural activities - Model for the control of reciprocal commitments between producers and an organized agricultural production structure

Subsector F20 Registration Date 2016-05-02 AFNOR France ID 00196121/0001 ICS PR NF V01-007 Quality and environmental management system for agricultural activities - Model for the control of reciprocal commitments between producers and an organized agricultural production structure Page 28 Subsector F99 UNDETERMINED Subsector F99 (Secondary Subsector) Registration Date 2016-05-09 NEN Netherlands ID 50001963/0001 ICS 29.240.01, 91.140.50 NTA 82202016 Concept nl Periodical fire risk assessment of low voltage electrical installations and work equipment Periodical fire risk assessment of low voltage electrical installations and work equipment ** End of Sector **

Information procedure Page 29 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector H PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on 2016-06-03

Subsector H04 SPORTS EQUIPMENT Page 30 Subsector H04 Registration Date 2016-05-23 ASI Austria ID 00026810/0001 ICS 03.080.30, 03.180, 97.220.10 ÖNORM S 1150/A Requirements for the training of qualified bath supervisors These Austrian Standard defines requirements for the training of bath personnel. This ÖNORM contains the training- and exam standards, the teaching areas and contents and the qualification of teachers. Subsector H04 Registration Date 2016-05-30 UNI Italy ID 01601819/0001 ICS 97.220.10 UNI1601819 Swimming pools - Requirements for swimming pool water circulation, filtration, disinfection and chemical treatment The standard provides a swimming pool classification and specifies design requirements, construction and management of water treatment installations. The standard also gives indications regarding tests and inspections to ensure swimming pool water quality suitable for bathing water. REV/AMD UNI 106372015 Subsector H11 HEATER CONTROLS Subsector H11 Registration Date 2016-05-17 DIN Germany ID 04111887/0001 ICS 04111887 Statistics on meteorological data for calculating the energy requirement for heating and air conditioning equipment Subsector H99 UNDETERMINED

Page 31 Subsector H99 Registration Date 2016-05-17 DIN Germany ID 11201166/0001 ICS 03.100.30 DIN 79161-2 Playground inspection - Qualification of playground inspectors - Part 2 Examination and certification Subsector H99 Registration Date 2016-05-17 DIN Germany ID 11201167/0001 ICS 03.100.30 DIN 79161-1 Playground inspection - Qualification of playground inspectors - Part 1 Training and education ** End of Sector **

Information procedure Page 32 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector I MECHANICAL ENGINEERING Register issued on 2016-06-03

Subsector I01 SCREW THREADS Page 33 Subsector I01 Registration Date 2016-05-10 ID t1026-90/0001 ICS 21.060.20 Fasteners-Shouldered Hexagon Nuts-Section 90 Metric Fine Pitch Thread-Metric Rounded Acme Thread- Product Grade A This standard covers metric rounded acme fine pitch thread shouldered hexagon nuts. European Modified DIN 303872007 Subsector I01 Registration Date 2016-05-10 ID t1026-92/0001 ICS 21.060.20 Fasteners-Hexagon Nuts-Section 92-Collar Nuts Metric Coarse Thread With A Height of 1,5 d This standard covers metric coarse pitch thread hexagon nuts with collar, with a heigh of 1,5 d European Modified DIN 63312003 Subsector I01 Registration Date 2016-05-10 ID t1026100/0001 ICS 21.060.20 Fasteners-Hexagon Nuts-Section 100-Cap Nuts With Metric Coarse and Fine Thread- Product Grade A This standard covers metric coarse and fine pitch thread hexagon cap nuts assigned European Modified DIN 9172015 Subsector I01 Registration Date 2016-05-10 ID t1026101/0001 ICS 21.060.20 Fasteners-Hexagon Nuts-Section 101-Dommed Cap Nuts With Metric Coarse and Fine Pitch Thread-Product Grades A and B

Page 34 This standard covers metric coarse and fine pitch thread hexagon domed cup nuts assigned to product grades A and B European Modified DIN 15872014 Subsector I01 Registration Date 2016-05-02 ID tst61-98/0001 ICS 21.040.30 Screw threads Buttress threads - Part 98 0,8 mm to 2 mm pitch Dimensions and limit sizes This standard specifies dimensions and limit sizes of buttress threads having 0,8 mm to 2 mm pitch European Modified DIN 204012004 Subsector I02 FASTENERS Subsector I02 Registration Date 2016-05-10 ID t1026-77/0001 ICS 21.060.20 Fasteners-Hexagon Nuts-Section 77-Prevailing Torque Type Domed Cap Nuts With Non Metallic Insert-Property Classes 5,6,8 and 10-Product Grades A and B This standard covers metric coarse and fine pitch thread prevailing torque type domed cup hexagon nuts with non-metallic insert. European Modified DIN 9862013 Subsector I05 IRON PIPES Subsector I05 Registration Date 2016-05-23 ASI Austria ID 00026809/0001 ICS 23.040.10 ÖNORM B 2560 Ductile iron pipes - Finishing paints of polyurethane or epoxy materials - Requirements and tests This ÖNORM contains requirements and test applied of finishing layer made during the manufacturing process - of polyurethane ("PU") or epoxy resin ("EP") for pipes made of ductile cast iron with factory-applied zinc coating ÖNORM B 2555 according to the

Page 35 ÖNORMEN EN 545, EN 598 and EN 969 This finishing layer is suitable for pipes, which are both above and below the water level installed in the soil with a soil resistance of more than 1500 O cm. In differentiated assessment of the soil in accordance with the procedures contained in ÖNORM B 5013-1 tubes with this finishing layer can be used to a rating number of 15. Subsector I09 SMALL TOOLS Subsector I09 Registration Date 2016-05-02 ID t11761-2/0001 ICS 21.040.10 Wire thread inserts for ISO metric screw threads Part 2 Tapped holes for thread inserts, thread tolerances This standard specifies limits of size and tolerances for tapped holes receiving wire thread inserts designed to provide 2 mm to 52 mm diameter internal threads European Modified DIN 8140-22005 Subsector I09 Registration Date 2016-05-02 ID t11761-3/0001 ICS 21.060.99 Wire thread inserts for ISO metric screw threads Part 3 Gauges and gauge sizes The document specifies dimensions of gauges for testing wire threads inserts for ISO-metric screw threads. European Modified DIN 8140-31993 Subsector I09 Registration Date 2016-05-10 ID tst03796/0001 ICS 25.140.30 Wrenches for pipes This standard covers adjustable metric wrenches for pipes, bolts and nuts.this standard doesnit cover swedish pattern wrenches for pipes.

Page 36 European Modified DIN 52341992 Subsector I09 Registration Date 2016-05-10 ID tst03796/0001 ICS 25.140.30 Wrenches for pipes This standard covers adjustable metric wrenches for pipes, bolts and nuts.this standard doesnit cover swedish pattern wrenches for pipes. International Modified JIS B 46061995 Subsector I11 MACHINE TOOLS Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 102009 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 1382003 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 37 Reamers This standard covers reamers. European Modified DIN 18952007 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 2041996 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 2051996 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 2062008 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 38 Reamers This standard covers reamers. European Modified DIN 212-22011 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 212-32011 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 2172-12013 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 2172-22007 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 39 Reamers This standard covers reamers. European Modified DIN 228-11987 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 228-21987 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 80112007 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 80501997 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 40 Reamers This standard covers reamers. European Modified DIN 8093-12013 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 8093-22013 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Modified DIN 91996 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 14201966 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 41 Reamers This standard covers reamers. European Not Equivalent to DIN 18091961 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 2081981 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 212-11979 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 21791975 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 42 Reamers This standard covers reamers. European Not Equivalent to DIN 21801975 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 2191981 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 3111975 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 80511979 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 43 Reamers This standard covers reamers. European Not Equivalent to DIN 80541979 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 80891979 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 80901981 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. European Not Equivalent to DIN 80941979 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 44 Reamers This standard covers reamers. International Modified ISO 22382011 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. International Modified ISO 22502009 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. International Modified ISO 236-22013 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. International Modified ISO 34662016 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10

Page 45 Reamers This standard covers reamers. International Modified ISO 34672016 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. International Not Equivalent to ISO 236-11976 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. International Not Equivalent to ISO 24021972 Subsector I11 Registration Date 2016-05-10 ID tst00078/0001 ICS 21.100.10 Reamers This standard covers reamers. International Not Equivalent to ISO 34651975 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 46 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49501962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49511962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49521962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49531962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 47 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49541962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49551962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49601962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49611962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 48 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49631962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 4964-11962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49651962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49711980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 49 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49721980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49731980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49751980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49761980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 50 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49771980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49781980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49801980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 49811980 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 51 Turning tools This standard covers turning tools. European Not Equivalent to DIN 65801985 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 65811985 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 770-11962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. European Not Equivalent to DIN 770-21962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 52 Turning tools This standard covers turning tools. European Not Equivalent to DIN 7711962 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. International Modified ISO 2411994 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. International Modified ISO 2422014 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. International Modified ISO 2432014 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10

Page 53 Turning tools This standard covers turning tools. International Modified ISO 5132012 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. International Modified ISO 5142014 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. International Modified ISO 8832013 Subsector I11 Registration Date 2016-05-10 ID tst00095/0001 ICS 21.100.10 Turning tools This standard covers turning tools. International Not Equivalent to ISO 5041975 Subsector I12 PULLEYS & BELTS Subsector I12 Registration Date 2016-05-02

Page 54 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts European Modified DIN 22151998 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts European Modified DIN 7753-11998 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 10812014 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 117492014 Subsector I12 Registration Date 2016-05-02

Page 55 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 240352014 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 27902004 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 52872003 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 84192004 Subsector I12 Registration Date 2016-05-02

Page 56 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified ISO 99821998 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified JASO E 1072001 Subsector I12 Registration Date 2016-05-02 ID tst00198/0001 ICS 21.220.10 V belts This standard specifies V belts International Modified JASO E 1092011 Subsector I19 NUCLEAR ENERGY Subsector I19 Registration Date 2016-05-17 DIN Germany ID 08000277/0001 ICS 11.040.50 DIN 6809-4 Clinical dosimetry - Part 4 X-ray therapy with X-ray tube voltages between 10 kv and 300 kv

Subsector I19 Registration Date 2016-05-17 DIN Germany ID 08000282/0001 ICS 11.040.50 DIN 6827-1 Recording in medical application of ionizing radiation - Part 1 Therapy with electron accelerators as well as X-ray and gamma-ray therapy systems Page 57 Subsector I27 EARTH MOVING AND CONSTRUCTION EQUIPMENT Subsector I27 Registration Date 2016-05-03 BSI United Kingdom ID 01601276/0001 ICS BS 5607 Code of practice for the safe use of explosives in the construction industry Subsector I31 VALVES Subsector I31 Registration Date 2016-05-17 DIN Germany ID 00300638/0001 ICS 00300638 Stainless steel fittings for the food and chemical industry - Part 3 Hygienic clamp pipe connection, short type Subsector I31 Registration Date 2016-05-17 DIN Germany ID 00300639/0001 ICS 00300639 Stainless steel fittings for the food and chemical industry - Part 1 Hygienic screwed pipe connection, short type

Page 58 Subsector I31 Registration Date 2016-05-17 DIN Germany ID 00300640/0001 ICS 00300640 Stainless steel fittings for the food and chemical industry - Part 2 Hygienic flanged pipe connection, short type ** End of Sector **

Information procedure Page 59 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector M METALLIC MATERIALS Register issued on 2016-06-03

Subsector M08 LIGHT ALLOYS Page 60 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046132/0001 Draft for public enquiry ICS PNE 38336 Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5052/EN AW- AlMg2,5. This standard specifies, for the alloy EN AW-5052 [EN AW-AlMg2,5] of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383362003 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046135/0001 Draft for public enquiry ICS PNE 38339 Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5754/EN AW- AlMg3. This standard specifies, for the alloy EN AW-5754 [EN-AW-AlMg3] of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383392003 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046136/0001 Draft for public enquiry ICS PNE 38340 Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5083/EN AW- AlMg4,5Mn0,7 This standard specifies, for the alloy EN AW-5083 [EN-AW-AlMg4,5Mn0,7] of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383402004 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046137/0001 Draft for public

Page 61 enquiry ICS PNE 38341 Wrought aluminium and aluminium alloys. 5000 series. AlMg. Alloy EN AW-5086/EN AW- AlMg4 This standard specifies, for the alloy EN AW-5086 [EN-AW-AlMg4 of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383412004 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046138/0001 Draft for public enquiry ICS PNE 38342 Wrought aluminium and aluminium alloys. 6000 series. AlMgSi. Alloy EN AW-6061/EN AW-AlMg1SiCu. This standard specifies, for the alloy EN AW-6061[EN-AW-AlMg1SiCu] of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383422000 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046190/0001 Draft for public enquiry ICS PNE 38312 Wrought aluminium and aluminium alloys. 2000 series. AlCu. Alloy EN AW-2017A, EN AW-AlCu4MgSi(A). This standard specifies, for the alloy EN AW-2017A [EN AW-AlCu4MgSi(A)] of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383121999 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046191/0001 Draft for public enquiry ICS PNE 38313 Wrought aluminium and aluminium alloys. 2000 series. AlCu. Alloy EN AW-2014/EN AW- AlCu4SiMg. This standard specifies, for the alloy EN AW-2014 [EN AW-AlCu4SiMg] of wrought

Page 62 aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user. REV/AMD UNE 383132000 Subsector M08 Registration Date 2016-05-09 AENOR Spain Latest Date for Comments 2016-06-18 ID P0046192/0001 Draft for public enquiry ICS PNE 38314 Wrought aluminium and aluminium alloys. 2000 series. AlCu. Alloy EN AW-2024, EN AW-AlCu4Mg1. This standard specifies, for the alloy EN AW-2024 [EN AW-AlCu4Mg1] of wrought aluminium, its chemical composition and mechanical properties according to the European standards. In the Annex A (Informative) there are some other data of interest for the user REV/AMD UNE 383142000 ** End of Sector **

Information procedure Page 63 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector N NON-METALLIC MATERIALS Register issued on 2016-06-03

Subsector N01 PAPER AND BOARD Page 64 Subsector N01 Registration Date 2016-05-18 ID t3011668/0001 ICS 55.040 Paper Towels This standard specifies characteristics, types, sampling, inspection and marking of paper towel which are made from soft tissue paper and tissue products European Modified BS 14391992 Subsector N01 Registration Date 2016-05-18 ID t3011668/0001 ICS 55.040 Paper Towels This standard specifies characteristics, types, sampling, inspection and marking of paper towel which are made from soft tissue paper and tissue products International Modified SANS 1887-42015 Subsector N01 Registration Date 2016-05-10 ID tst11668/0003 ICS 55.040 Paper Towels This standard specifies characteristics, types, sampling, inspection and marking of paper towel which are made from soft tissue paper and tissue products European Modified BS 14391992 Subsector N01 Registration Date 2016-05-10 ID tst11668/0003 ICS 55.040 Paper Towels This standard specifies characteristics, types, sampling, inspection and marking of paper

Page 65 towel which are made from soft tissue paper and tissue products International Modified SANS 1887-42015 Subsector N02 SOLID FUELS Subsector N02 Registration Date 2016-05-23 SIST Draft Issue Date 2016-07-01 Slovenia Latest Date for Comments 2016-09-01 ID 00005504/0001 ICS 75.160, 75.160.20 osist 10202016 Liquid Petroleum Products - Determination of mark indikator content in Fuel Oil Extra Light and petroleum In this standard are test methods for determination of mark indicator content in Fuel Oil Extra Light and petroleum. Subsector N04 REFRACTORIES Subsector N04 Registration Date 2016-05-25 BDS Bulgaria ID BG007001/0001 ICS 81.080 prbds 13018 Aluminosilicate refractory mortars The standard refers to aluminosilicate refractory mortars, which consist of refractory mixtures of ground fireclay or fireclay scrap, refractory clays and unwashed (raw) kaoline. Aluminosilicate refractory mortars are used to fill gaps in the performance of refractory masonry with aluminosilicate refractory products. REV/AMD BDS 130181983 Subsector N05 TEXTILES Subsector N05 Registration Date 2016-05-03 BSI United Kingdom ID 01601101/0001 ICS BS 28191990+A2 Methods for determination of Bow, skew and lengthway distortion in woven and

knitted fabrics. Amendment Page 66 Subsector N06 RUBBER Subsector N06 Registration Date 2016-05-02 ID ts2810-1/0001 ICS 91.100.50 Elastomeric waterstops for sealing joints in concrete Part 1 Shapes and dimensions This standard covers elastomeric waterstops with and without steel stripes for sealing joints in concrete. European Modified DIN7865-12015-02 Subsector N06 Registration Date 2016-05-02 ID ts2810-2/0001 ICS 91.100.50 Elastomeric waterstops for sealing joints in concrete Part 2 Material specifications and testing This standard covers elastomeric waterstops with and without steel stripes for sealing joints, partly or fully embedded in concrete. This standard is valid for sealing joints against natural water according to TS 3440. European Modified DIN7865-22015-02 Subsector N07 SAWN TIMBER Subsector N07 Registration Date 2016-05-23 ASI Austria ID 00026803/0001 ICS 79.080 ÖNORM B 3013 Wooden raw profiles for windows - Requirements and test specifications This Standard specifies requirements for timber blanks and semi-finished profiles for nonstructural uses, including glued laminated and glued finger jointed products and the necessary testing and measurement methods

Page 67 Subsector N09 PLASTICS Subsector N09 Registration Date 2016-05-23 ASI Austria ID 00026805/0001 ICS 59.100.10 ÖNORM ISO 1887 Textile glass - Determination of combustible-matter content This International Standard specifies a method for the determination of the combustiblematter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped Strands, milled fibres, fabrics, and continuous-filament mats and other glass reinforcements. Subsector N09 Registration Date 2016-05-23 ASI Austria ID 00026806/0001 ICS 59.100.10 ÖNORM ISO 2559 Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications This International Standard provides a basis for specifications which is applicable only to textile glass mats that are made from chopped or continuous strands bonded together by chemical or mechanical means and that are used for the reinforcement of plastics. Subsector N09 Registration Date 2016-05-23 ASI Austria ID 00026807/0001 ICS 83.080.01 ÖNORM ISO 11359-1 Plastics - Thermomechanical analysis (TMA) - Part 1 General principles This part of ISO 11359 specifies the general conditions for the thermomechanical analysis of thermoplastics and thermosetting materials, filled or unfilled, in the form of sheet or moulded parts.

Page 68 Subsector N09 Registration Date 2016-05-30 UNI Italy ID 01601663/0001 ICS 13.030.50, 83.080.01 UNI1601663 Plastic raw-secondary materials - Part 1 Generality on plastic raw-secondary materials and plastics by-products The standard classifies the plastic raw-secondary materials obtained from the recovery and recycling of plastic waste and refers to plastics by-products. REV/AMD UNI 10667-12010 Subsector N14 PLASTICS PIPES Subsector N14 Registration Date 2016-05-23 ASI Austria ID 00026796/0001 ICS 23.040.20, 23.040.45 ÖNORM ISO 18488 Polyethylene (PE) materials for piping systems - Determination of Strain Hardening Modulus in relation to slow crack growth -- Test method This Standard specifies a method for the determination of the strain hardening modulus which is used as a measure for the resistance to slow crack growth of polyethylene. The strain hardening modulus is obtained from stress-strain curves on compression moulded samples. This Standard describes how such measurement is performed and how the strain hardening modulus shall be determined from such a curve. Details of the required equipment, precision, and sample preparation for the generation of meaningful data are given. This Standard provides a method that is valid for all types of polyethylene, independent from the manufacturing technology, comonomer, catalyst type, that are used for pipes and fittings applications. ** End of Sector **

Information procedure Page 69 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector S HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on 2016-06-03

Subsector S01 ACOUSTICS AND SOUND INSULATION Page 70 Subsector S01 Registration Date 2016-05-17 DIN Germany ID 00100918/0001 ICS 17.140.01 DIN 45682 Acoustics - Thematic maps in the field of sound immission protection Subsector S01 Registration Date 2016-05-30 UNI Italy ID 01601688/0001 ICS 17.140.20, 93.080.30 UNI1601688 Acoustics - CE marking of road traffic noise reducing devices The technical report is intended as a guideline for the application of the CE marking in accordance with current legislation on construction products that constitute the road traffic noise reduction devices according to the tests listed in Appendix ZA of new EN 143882015 harmonized to Directive 89/106 / EEC on construction products (CPD). This technical report applies to all types of anti-noise systems defined by UNI 11160. REV/AMD UNI/TR 113382009 Subsector S04 PROTECTIVE CLOTHING AND EQUIPMENT Subsector S04 Registration Date 2016-05-02 AFNOR France ID 00195921/0001 ICS PRNF S74-604 Protective clothing - Determination of the availability of the energy absorption ability of airbags Subsector S07 ANAESTHETIC AND RESPIRATORY EQUIPMENT Subsector S07 Registration Date 2016-05-26 UNMZ Czech Republic ID 85001016/0001 Draft for public

Page 71 ICS enquiry Terminal units for medical gas pipeline systems - Dimensional requirements This standard specifies requirements for probes (quick connectors) used with pipeline systems for medical gases, including air, oxygen, nitrous oxide, carbon dioxide, and for vacuum. This standard does not apply to components used for non-clinical purposes, within medical equipment or on the patient side. Subsector S08 AIR QUALITY Subsector S08 Registration Date 2016-05-30 PKN Poland ID 15901399/0001 ICS 13.040.30 prpn-z-04481 Air purity protection -- Determination of tetrahydrofuran in workplaces by gas chromatography with flame-ionization detection This standard gives a method for the determination of the content of tetrahydrofuran (CAS 109-99-9) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of tetrahydrofuran which can be determined by the method in the sampling and determination conditions specified in the standard is 15 mg/m3 Subsector S08 Registration Date 2016-05-30 PKN Poland ID 15901400/0001 ICS 13.040.30 prpn-z-04482 Air purity protection -- Determination of N,N -bis(2-aminoethyl)ethylenediamine in workplaces by high performance liquid chromatography with spectrophotometric detection This standard gives a method for the determination of the content of N,N - bis( 2- aminoethyl)ethylenediamine (CAS 112-24-3) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of N,N -bis(2- aminoethyl)ethylenediamine which can be determined by the method in the sampling and determination conditions specified in the standard is 0,1 mg/m3

Page 72 Subsector S08 Registration Date 2016-05-30 PKN Poland ID 15901401/0001 ICS 13.040.30 prpn-z-04483 Air purity protection -- Determination of acetic anhydride in workplaces by high performance liquid chromatography with spectrophotometric detection This standard gives a method for the determination of the content of acetic anhydride (CAS 108-24-7) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienicsanitary conditions. The lowest concentration of acetic anhydride which can be determined by the method in the sampling and determination conditions specified in the standard is 1,2 mg/m3 Subsector S08 Registration Date 2016-05-30 PKN Poland ID 15901402/0001 ICS 13.040.30 prpn-z-04484 Air purity protection -- Determination of 1,1-dichloroethene in workplaces by gas chromatography with flame-ionization detection This standard gives a method for the determination of the content of 1,1-dichloroethene (CAS 75-35-4) in workplace air by gas chromatography with flame-ionization detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of 1,1-dichloroethene which can be determined by the method in the sampling and determination conditions specified in the standard is 0,8 mg/m3 Subsector S08 Registration Date 2016-05-30 PKN Poland ID 15901403/0001 ICS 13.040.30 prpn-z-04485 Air purity protection -- Determination of 2-methyl-4,6-dinitrophenol in workplaces by high performance liquid chromatography with spectrophotometric detection This standard gives a method for the determination of the content of 2-methyl-4,6- dinitrophenol (CAS 534-52-1) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienicsanitary conditions. The lowest concentration of 2-methyl-4,6-dinitrophenol which can be determined by the method in the sampling and determination conditions specified in the standard is 0,005 mg/m3

Page 73 Subsector S08 Registration Date 2016-05-30 PKN Poland ID 15901404/0001 ICS 13.040.30 prpn-z-04486 Air purity protection -- Determination of acrylamid in workplaces by high performance liquid chromatography with spectrophotometric detection This standard gives a method for the determination of the content of acylamide (CAS 79-06-1) in workplace air by high performance liquid chromatography with spectrophotometric detection. The method is applicable during control of the hygienicsanitary conditions. The lowest concentration of acrylamide which can be determined by the method in the sampling and determination conditions specified in the standard is 0,007 mg/m3 Subsector S09 WATER QUALITY AND WATER SUPPLY Subsector S09 Registration Date 2016-05-23 ASI Austria ID 00026798/0001 ICS 13.060.50 ÖNORM ISO 6333 Water quality -- Determination of manganese -- Formaldoxime spectrometric method This Standard includes a procedure the Determination of manganese in surface and drinking water. The procedure is applicable to concentrations between 0,01 mg/l and 5 mg/l. Concentrations above 5 mg/l may be determined after suitable dilution of the sample. Subsector S09 Registration Date 2016-05-27 UNMZ Draft Issue Date 2016-06-30 Czech Republic Latest Date for Comments 2016-09-30 ID 75000716/0001 ICS Water quality Rapid method for determination of gross alpha activity This standard applies for the rapid determination of grossl alpha activity in the waters. The method is intended primarily for use in a radiological emergency

Subsector S18 STERILIZATION OF EQUIPMENT Page 74 Subsector S18 Registration Date 2016-05-02 AFNOR France ID 00195858/0001 ICS PR NF S98-002 Requirements for the development, validation and routine control of a sterilisation process for medical devices using hydrogen peroxide Subsector S27 WASTE - CHARACTERIZATION, TREATMENT AND STREAMS Subsector S27 Registration Date 2016-05-23 ASI Austria ID 00026800/0001 ICS 13.030.40, 91.040.01 ÖNORM B 3151 Dismantling of buildings as a standard method for demolition The present ÖNORM describes the measures needed for the planning and execution of the dismantling of buildings and specifies separation principles for the different materials in regard to recovery or disposal. The dismantling objective is to obtain mono-material mostly free of harmful substances and impurities. If ecologically appropriate, technically possible and not unreasonably cost-intensive, the waste products of the dismantling process shall be recovered. Harmful substances and impurities have to be examined and separated to obtain recyclable mono-fraction demolition materials. The present ÖNORM describes the dismantling in structural and civil engineering including line construction works and paved area. ** End of Sector **

Information procedure Page 75 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector T TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on 2016-06-03

Subsector T02 AEROSPACE Page 76 Subsector T02 Registration Date 2016-05-17 DIN Germany ID 13115613/0001 ICS 13115613 Aerospace series - Powder for additive manufacturing with powderbed process - technical delivery specification Subsector T14 PACKAGING Subsector T14 Registration Date 2016-05-30 UNI Italy ID 01601820/0001 ICS 55.160 UNI1601820 Wood packages and special packages - Audit - Principles, criteria and management The standard defines the management criteria for the inspection of wooden packaging and special packaging. REV/AMD UNI 109862002 Subsector T14 Registration Date 2016-05-30 UNI Italy ID 01601854/0001 ICS 55.160 UNI1601854 Wood packaging - Guidelines for foldable wooden boxes construction The technical report gives indications for design and manufacturing of foldable wooden boxes. Subsector T14 Registration Date 2016-05-17 DIN Germany ID 11501206/0001 ICS 11501206

Page 77 Transportation chain for meat and meat products - Part 6 Pallet made from polyethylene, 800 mm 1200 mm 160 mm; Construction, requirements and test Subsector T14 Registration Date 2016-05-10 ID t0109668/0001 ICS 55.040, 67.240 Sensory analysis Testing of packaging materials and packages for food products This standard specifies a sensory analysis method for packaging materials and packages for food products to assess their compatibility with food products. European Identical to DIN 109552004 Subsector T18 ELEVATING PLATFORMS Subsector T18 Registration Date 2016-05-03 BSI United Kingdom ID 01601277/0001 ICS BS 8460 Safe use of MEWPS. Code of practice Subsector T18 Registration Date 2016-05-03 BSI United Kingdom ID 01601327/0001 ICS BS 6037-1 Planning, design, installation and use of permanently installed access equipment. Code of practice. Part 1 Suspended access equipment Subsector T20 TRAM- AND RAILWAY ENGINEERING Subsector T20 Registration Date 2016-05-02

Page 78 AFNOR France ID 00196115/0001 ICS prnf F19-481 Railway rolling stock - self adhesive marks Subsector T20 Registration Date 2016-05-17 DIN Germany ID 08701250/0001 ICS 08701250 State of railway vehicles - Brake - Part 6 Magnetic track brake Subsector T20 Registration Date 2016-05-17 DIN Germany ID 08701251/0001 ICS 08701251 State of railway vehicles - Brake - Part 8 Tightness and efficiency Subsector T20 Registration Date 2016-05-17 DIN Germany ID 08701252/0001 ICS 08701252 State of railway vehicles - Brake - Part 9 Function of driver's brake valve, control devices and indicators in driver's cabs Subsector T20 Registration Date 2016-05-17 DIN Germany ID 08701253/0001

ICS 08701253 State of railway vehicles - Brake - Part 10 Function of emergency brake equipment and emergency brake override Page 79 Subsector T99 UNDETERMINED Subsector T99 Registration Date 2016-05-17 DIN Germany ID 06003623/0001 ICS 06003623 Platform scales - Part 5 Design loads for bridges of road weighbridges Subsector T99 Registration Date 2016-05-17 DIN Germany ID 06003624/0001 ICS 06003624 Platform scales - Part 6 Design loads for rail weighbridges and combined rail and road weighbridges bridges ** End of Sector **

Information procedure Page 80 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector X UNDETERMINED STANDARDIZATION AREA Register issued on 2016-06-03

Subsector X01 UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL) Page 81 Subsector X01 Registration Date 2016-05-27 NSAI Ireland ID 00000901/0001 ICS 67.020, 67.020 I.S. 342201x Guide to good hygiene practice for the food processing industry in accordance with the Council Directive 93/43/EEC on the hygiene of foodstuffs This Irish Standard is a guide to good hygiene practice, which meets the requirements of Council Directive 93/43/EEC on the hygiene of foodstuffs, which has been approved by the Department of Health. It shall apply to all food processing companies, with the exception of the Meat, Dairy and Fish processing sectors which are required to comply with specific community food hygiene rules. This Standard shall only apply to those food-related activities under the direct control of the food processing company. Food processing companies complying with the requirements of this Standard also comply with the requirements of the Council Directive 93/43/EEC. The scope of this Standard is limited to - Buildings where the maximum number of storeys is four and the maximum height from the external ground level to the top floor level is 10 m; - Buildings where the maximum fire resistance is 60 minutes; - Buildings where timber materials are subject to either service classes 1 or 2; - Stud centres up to a maximum of 610 mm; - Panels manufactured using mechanical fasteners; - Buildings that have an outer leaf of masonry or timber cladding with a drained and ventilated cavity behind the outer leaf. Other external claddings, where a drained and ventilated cavity is provided, are allowed by this Standard provided they have an approval certificate. The on-site fabrication of timber frame wall panels is outside the scope of this Irish Standard. REV/AMD I.S. 342201x ** End of Sector **

Information procedure Page 82 Monthly Notifications Register Notifications registered at CCMC from 2016-05-01 to 2016-05-31 Sector Z INFORMATION TECHNOLOGY Register issued on 2016-06-03

Subsector Z99 UNDETERMINED Page 83 Subsector Z99 Registration Date 2016-05-30 UNI Italy ID 01601822/0001 ICS 35.020 UNI1601822 Unregulated professional activities - ICT professional profiles - Part 7 Geographic Information professional profiles This proposal aims to use the tools provided by the related part 1 "Methodology for the construction of professional profiles based on the e-cf system" in order to define the thirdgeneration professional profiles concerning the professionalism in the field of geographic information. Subsector Z99 Registration Date 2016-05-30 UNI Italy ID 01601856/0001 ICS 35.020 UNI1601856 Unregulated professional activities - Professions in the ICT domain - Elements for the assessment and validation of learning outcomes The standard defines the elements for the assessment and validation of learning outcomes as well as the ethical aspects applicable to the knowledge, ability and competence of the professional profiles in the ICT field defined in UNI EN 16234-1. The standard defines the certification procedures against the UNI 11621 multi-part standard. REV/AMD UNI 115062013 ** End of Sector **

List of non-electrotechnical subsectors 2011-06 Sector A Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete 71 104; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures 165 124 B11 Metal structures 167 135 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134 B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

Sector C Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 401 C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C22 Bio-Based products / 411 C99 Undetermined / 386

Sector F Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369; 402

Sector I Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74 I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics 61 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

Sector S Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS ;377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150; 324 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2016 Issued on 3 June 2016

Page 1 Information Procedure on Standards Notifications registered at CCMC during May 2016 Sector V ELECTRONIC ENGINEERING Register issued on 3 June 2016

Subsector V28 FIBRE OPTICS Page 2 Subsector V28 Registration Date 2016-05-02 AFNOR France ID 00196118/0001 ICS XP C93-539 Test on fire-resistant optical fibre cables under fire conditions ** End of Sector **

Page 3 Information Procedure on Standards Notifications registered at CCMC during May 2016 Sector W ELECTRICAL ENGINEERING Register issued on 3 June 2016

Subsector W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR Page 4 Subsector W33 Registration Date 2016-05-03 BSI United Kingdom ID 01601290/0001 ICS BS 45731970+A5 Specification for 2-pin reversible plugs and shaver socket-outlets. Amendment ** End of Sector **

Page 5 Information Procedure on Standards Notifications registered at CCMC during May 2016 Sector X UNDETERMINED STANDARDIZATION AREA Register issued on 3 June 2016

Subsector X01 UNDETERMINED STANDARDIZATION AREA (NON-ELECTRICAL) Page 6 Subsector X01 Registration Date 2016-05-27 NSAI Ireland ID 00000901/0001 ICS 67.020, 67.020 I.S. 342201x Guide to good hygiene practice for the food processing industry in accordance with the Council Directive 93/43/EEC on the hygiene of foodstuffs This Irish Standard is a guide to good hygiene practice, which meets the requirements of Council Directive 93/43/EEC on the hygiene of foodstuffs, which has been approved by the Department of Health. It shall apply to all food processing companies, with the exception of the Meat, Dairy and Fish processing sectors which are required to comply with specific community food hygiene rules. This Standard shall only apply to those food-related activities under the direct control of the food processing company. Food processing companies complying with the requirements of this Standard also comply with the requirements of the Council Directive 93/43/EEC. The scope of this Standard is limited to - Buildings where the maximum number of storeys is four and the maximum height from the external ground level to the top floor level is 10 m; - Buildings where the maximum fire resistance is 60 minutes; - Buildings where timber materials are subject to either service classes 1 or 2; - Stud centres up to a maximum of 610 mm; - Panels manufactured using mechanical fasteners; - Buildings that have an outer leaf of masonry or timber cladding with a drained and ventilated cavity behind the outer leaf. Other external claddings, where a drained and ventilated cavity is provided, are allowed by this Standard provided they have an approval certificate. The on-site fabrication of timber frame wall panels is outside the scope of this Irish Standard. REV/AMD I.S. 342201x ** End of Sector **

Page 7 Information Procedure on Standards Notifications registered at CCMC during May 2016 Sector Z CCMC/CEN/CLC Register issued on 3 June 2016