Table of Contents Thank you for purchasing a Migun. Please read these instructions with care. Understanding them in whole will enable you to use this product safely and properly. It will also be helpful to keep this instruction guide handy for easy referral whenever you should need it. Thank you. Safety Warning Caution Features and Use of the Migun Mat 10 Components of the Migun Mat 11 Controller Parts and Functions - Healthy Mat 12 Product Specification 13 Safety Checklist Operation Procedures Storage and Maintainence Cleaning your Migun Mats MEMO Service Contract 14 16 17 18 20 21 Please read this section carefully prior to usage. The details here are very important and will ensure your safety. In this instruction guide, the risk level is divided into three levels: Danger Warning Caution If these 3 symbols are ignored, users could be seriously injured, or you could accidentally destroy the unit. After Service Request Warning Please do not disjoint, repair, or remodel the product unless you are a certified technician or a member of our company s After Service staff. Danger from electric shock or any number of other unexpected events could be the result of tampering with this unit. Caution Please do not perform any other repair or maintenance that is not included in this instruction guide. Failure to follow this warning may result in operation error, electric shock, or fire. The details in this guide may change without prior notice from the company to the users.
Please follow these instruction details in order to protect yourself from accidents and risk. This is the sign to make users understand the details and operation that could possibly result in danger. Please read and keep these details in order to protect yourself from facing unnecessary danger. Operational Caution Warning Power and Set-Up Warning? After Service Request 110V/60Hz The power is rated 110V/60Hz. The plug must be grounded and connected only to 110V. Failure and electric shock could occur should a short circuit happen. Please make sure the unit is plugged in properly. Please do not plug this unit in with any other electronic appliances on the same power outlet using multiple outlet adapters or extension cords. Overheating may result in fire. Please do not allow water to come into contact with the product or use the product with wet hands. Failing to do so may result in electric shock. If any errors occur in the product, please stop using it immediately and contact the dealer that you purchased the product from, or the Migun Headquarter. 110V AC more than 15A Shorter than 5m Do not pull on the electrical cord. Please pull on the plug itself at its base using your hand. Fire or electric shock may result if the cord is damaged. If an extension cord is absolutely required, please follow the power requirements mentioned above. Please do not damage, stress, or excessively bend the power cord. Please do not put place the power cord underneath heavy objects. Fire or electric shock may result should the power cord become damaged. 110V AC (Alternating current), 15A or above, 5m or shorter. Please keep the power plug clean and free from any foreign substances are present. Fire or electric shock may result if the plug is damaged or used when it has foreign substances present. Please do not plug or unplug the power plug with wet hands. Doing this may result in electric shock. Please unplug the power plug prior to cleaning or repairing the product to avoid the possibility of electric shock.
Caution Caution Power and Set-Up Please do not put the cord in an area where people can step on it. It is recommended to unplug the unit when there is lightning present. Operation and Storage Please unplug the cord when not in use. This can prevent electrical accidents such as short-circuiting or fire. Please do not allow any sharp objects to come into contact with the unit. Any damage to the product may cause electric shock. Do not put any objects on top of the product. The objects could be damaged while the product is in use. Please lower the temperature if it becomes too hot to avoid skin irritation or burns. Please do not let any paper clips, staples, or small metal objects fall into the unit. Otherwise, the product may become damaged and a malfunction could occur. Please do not put any drinks on top of the unit or near the it. Otherwise, the liquid may spill and negatively influence the product. Electric shock or shortage may even occur. Please do not use excessive force while using the product to avoid unit damage. Do not station the product near any open fire or any heating appliances. Otherwise, it may result in fire or electric shock. Please do not smoke anywhere near the product. Ashes may damage the product or cause fire to occur. Users could be burned if they sleep with on the unit at a high temperature. Therefore, when sleeping, please lower the temperature to a safe level. After Service Request After unplugging the cord, please wait at least one minute prior to re-plugging it in to avoid this product being damaged due to excessive operation. Please keep the product away from direct sunlight. Otherwise, discoloration may occur. If the unit is dropped or seriously impacted seriously, it may result in additional accidents, therefore, please return the product where you purchased it from or any A/S office. Please do not place the product near flammable objects in order to prevent a fire from igniting. Please protect and keep the product away from corrosive objects and elements to prevent errors during operation. MOONGCHI: 1998 STANDARD CO., LTD The mat is very hot. Please avoid direct contact with skin. Use a blanket or rug between your skin and the unit at all times. Please use the product after reading the manual carefully.
Caution Caution The following risks could occur if children come into contact with the product. Before using the product, please follow your doctor s prescription and/or personal instructions. Suffocation could occur to children if they wrap the cords around their necks. If children bite the cord or scratch it with a knife or sharp object, it may result in fire or electric shock. Please consult a doctor prior to use if you have any of the following health conditions: Acute disease Malignant [vicious] tumor High fever Heart problems (Especially those who use a pacemaker.) Perception difficulty Pregnant women Skin problems Artificial internal organ Artificial skeletal structure Please do not allow children to play around the product to prevent them from physical harm. If children play around the product, they could be accidentally hurt against the unit s edges. (If the table was purchased separately.) Please keep children away when using the product. Careless handling could result in fire or electric shock. Please do not use the product for any other purposes except for the original purpose designated by Migun Medical Instruments Co., LTD. Please do not use the product while laying on it improperly. For any concern that is not stated in the instruction guide, please contact a store representative or the home office prior to usage. Migun s very first concern is always the health and safety of our customers. Please follow these detailed instructions to ensure your safety and to enjoy the long-term benefits of our product.
Characteristics of the Mat Components of the Mat Operational Characteristics of the Migun Healthy Mat 1. Warming and heating functions of the healthy mat allow users to set temperature within the range of 86ºF~158ºF freely and to maintain that temperature for any duration. -You can obtain a good heating effect according to the set temperature or by selecting a certain temperature suitable for sleeping. 2. The unit is convenient to move, set up, and maintain. Anyone can manage it easily. 1) Always check the power rating before using. 2) Using this together with other medical instruments may create unnecessary risk or accidental danger. 3) If any failure of the device occurs, stop using it immediately. 4) If there is power failure, switch off the power, and stop using it immediately. 5) If you have any problems with your body that was possibly caused by the device, stop using it immediately, and consult your doctor. 6) Those who fall under any of the following conditions are recommended to consult with their doctor immediately before continuing with usage: Acute disease Malignant [vicious] tumor High fever Heart problems (Especially those who use a pacemaker.) Perception difficulty Pregnant women Skin problems Artificial internal organ Artificial skeletal structure 7) Please do not allow the mat to touch the body directly. Always place a blanket or comforter between your body and the mat to prevent skin burn. 8) Keep the mat at a proper temperature (50ºF~77ºF) and under proper humidity (within 35-80%). 9) If any questions remain after reading this instruction guide, please consult with your dealer before attempting further usage. 10) Age and sex eligible for use requirements are: Male or Female, 3 years and older but adult supervision is strongly recommended with all children 12 and younger. Healthy Mat (Queen) (Full) Manual Controller Catalog
Controller Parts & Functions - Mini Mat Controller Parts & Functions - Mini Mat Features Functions 1. Temperature Control Knob 2. Power Indication LED Controls temperature of Thermal Mat. Lights up when power is turned on. 1. Plug power cord into an AC 120V outlet. (AC 110~120V only) 3. Temperature Indication LED 4. Power Switch Lights up when Thermal Mat is being heated. Turns main power on or off. 2. Connect 6-pin power connecter on the controller to Thermal Mat. 5. Error LED Lights up when there is an error.! That's what we make Instructions 3~6 3. Turn Power switch on and turn Temperature Control Knob clockwise to turn the power on and set temperature. Power Indication LED and Temperature Indication LED will light up. 1 4 5 6 3 7 2 8 1 9 4 5 6 3 7 2 8 3,5 1 9 Temperature Temperature 2 3 Thermal heat Operation Error New MG-3600 Healthy Mat 5 Thermal heat Operation Error New MG-3600 Healthy Mat 5. Turn Temperature Control Knob to set desired temperature on the Thermal Mat. power Power 4 3,6 6. Turn Power switch off and unplug power cord from the outlet when you are not using the Thermal Mat.
Controller Parts & Functions - Healthy Mat Controller Left mat temperature dial: The dial that sets the temperature on the left mat. Left mat temperature indication lamp: The lamp will be turned on when pressing the left mat start button. Left mat start lamp: The lamp will be turned on when left mat is turned on. Left mat start button:a button to turn on power for the left mat. A dial to test whether electromagnetic waves are being blocked. A lamp to check whether electromagnetic waves are being blocked. Main power switch Right mat start button A button to turn on power for the right mat. Right mat start lamp: The lamp will be turned on when right mat is turned on. Right mat temperature indication lamp: The lamp will be turned on when pressing the right mat start button. Right mat temperature dial: The dial that sets the temperature on the right mat. Power lamp: Lights up when the power is on.
Product Specifications Preparations Before Using Model No. Product Name ED-101 (Queen), EDM-202 (Full) Heating Mat 1) Read the instruction guide carefully. 2) Spread the mat on a flat place so that it will not fold. 3) Check if the right voltage is being used. Product Authorization No. Maker HH-07136-1001C (ED-101) HH-07567-4004 (EDM-202) END Medical Instruments Co. LTD. 4) Connect the power plug to an outlet. - This product is only for the use with AC110V/60Hz - Do not fail to check the power level. 110V/60Hz Voltage/Frequency Power Consumption Heat Emitting Wire 110V, 60Hz ED-101 : 420W, EDM-202 : 240W Non-magnetic thermal wire, AC220V Operational Procedures Temperature Adjustment Method Dimension/Weight Mat Temperature Others Thermostat ED-101 : 72.75 lbs / 60Ž 80Ž EDM-202 : 47.4 lbs / 54Ž 75Ž 86ºF~158ºF 1. Built-in circuit to prevent excessive temperature inside the mat (using bimetal 205ºF) 2. Use of natural fiber and copper plate to block current from the earth and electromagnetic waves 3. Use of antibiotic and antibody natural fibers 4. Use of non-magnetic thermal wire that does not emit magnetic fields 5. Use of far infrared ray emitting a "new hundred year old stone" 1. Insert the 8P connector of the controller into the electric mat. (Full mat: Pg.6) 2. Press the ON/OFF switch. The power lamp will turn on.
Operational Procedures 3. Press the left and right warming and heating switches to turn the warming and heating lamps on. 6. When setting the temperature of the Healthy Mat, turn the dial setting for temperature adjustment to the desired temperature. 4. The left and right operation lamps will blink to operate according to the position of the temperature adjustment dial. 7. Never open or disassemble the controller. This will prevent electric shock. 5. For the electromagnetic wave selection function, select EMF lamp off to use when holding the Select button. (When the EMF lamp is on while holding the electromagnetic wave selection function means that electromagnetic waves are being emitted.) 8. Turn off the power and disconnect the plug after use.
How to Clean the Product 1) Store the electric wire and mat in a safe place after using. 2) Keep the unit away from direct sunlight. Do not allow dust and foreign substances to come into contact with the product. 1) Wipe the surface of the mat with a soft, dry cloth. Do not use any abrasives. 2) Remove dust by using a vacuum cleaner. 3) Keep the unit in a place where air is well ventilated and that a proper temperature (50ºF~77ºF) is maintained. 4) Do not drop or strike the product. 3) Keep away from water. 4) Dry fully after repair and maintenance. 5) Disconnect the power plug when cleaning this product. 5) Do not adjust or alter any internal components of this electric mat under any condition. Keeping the product clean will add longevity and continued performance to your heating mat.
M E M O M E M O
Warranty R egis tration Warranty R egis tration Product Name Grace Period Purchase Date Customer Information Written Quality Guarantee of M I G UN Heating Mat Heating Mat 1 year from the date of purchase Month Date Year Name Address Model Name Product Number Place of Purchase ED-101 / EDM-202 MIGUN USA, COR P. Service Contract Service and Coverage : To arrange service for products covered by this Service Contract, please call the store where you purchased the product. Your initial call to MIGUN (Company) will include a fault diagnosis to clarify a problem and is required prior to commencement of repair services. DO NOT SHIP OR OTHERWISE DELIVER THE PRODUCT TO THE COMPANY UNLESS YOU FIRST CHECK YOUR OWNER'S MANUAL AND TROUBLESHOOTING GUIDE AND UNLESS YOU OBTAIN SERVICE AN AUTHORIZATION NUMBER FROM A CUSTOMER SERVICE REPRESENTATIVE. Repairs will be performed at our discretion by a Company service center or by a third-party service contractor. The term of this Contract commences on the original product purchase date and expires one year thereafter. THIS CONTRACT IS MADE INSTEAD OF A MANUFACTURER'S WARRANTY. MIGUN DOES NOT MAKE ANY WRITTEN WARRANTIES AND HEREBY EXEMPTS, TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, ANY IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE. THE PRODUCT COVERED BY THIS CONTRACT IS SOLD TO BUYER AS-IS, TO THE EXTENT ALLOWABLE BY LAW, AND THE BUYER AGREES HE/SHE HAS NOT RELIED ON ANY PROMOTIONAL MATERIAL, ORAL REPRESENTATIONS OR PROMISES, OR ANY RECOMMENDATIONS MADE BY COMPANY OR ANY OF ITS REPRESENTATIVES IN RELATION TO THE PURCHASE OF THE PRODUCT. Products covered by this Contract may be repaired or replaced with a comparable product at this sole discretion of Company. In the event that the Product or components of Product must be shipped to the Company for repair or replacement, the Company at its sole discretion may direct Buyer to ship the goods to its headquarters, a Company service center, or third-party service center. All shipping, handling, shipping insurance costs, and risk of loss for shipments to and from Company shall be borne solely by Buyer. This Contract covers parts and service charges only for repair and/or replacement of Product or components of Products resulting from manufacturing defects. MIGUN USA, COR P. Service Contract Dispute Resolution: Any claims or disputes arising under this Contract shall be resolved in the following manner and sequence: (1) First by telephone consultation with a service advisor handling the Customer Service telephone number listed on this Contract, (2) Secondly by non-binding mediation conducted in the District of Columbia by a third-party mediator selected by the Company, and if non-binding mediation is not successful, (2) Finally by binding arbitration under the rules of the American Arbitration Association. Buyer and Company hereby selects the District of Columbia as the forum state for arbitration of any and all claims or disputes. Buyer hereby waives all right to a jury trial and to settlement of any claims or disputes in state or federal court. Each party is responsible for bearing its own attorney's fees, costs and expenses and for one-half of any fees and costs charged by a third party mediator or arbitrator. Purchaser Records: To obtain services under this Contract, you must have an original, fully-executed Contract by you and the Company and all original receipts. Exclusions: This Contract does not cover repairs or replacements caused by accidental or intentional physical damage, condensation, spilled liquids, misuse, abuse, altered or missing serial numbers, damage caused by nonauthorized repair personnel or by Buyer, damage caused by connection of Product in an improper electrical power source or by electrical malfunctions. Also not covered are repair or replacement costs for lost or consumable parts, normal wear and tear, age of Product, cosmetic damage and problems due to improper and/or non-factory authorized installation or repairs. This Contract is not transferable. This Contract also excludes the following circumstances: Products that are used for commercial purposes, public rental or communal use in multi-family housing. Use of a product for there purposes will void this Contract. Buyer hereby waives any consequential or incidental damages, including but not limited to, loss of use. This Contract does not cover any fees related to third party contracts. Buyer hereby agrees that this Contract is not represented as an insurance policy or a statement of warranty of any kind. This Contract shall be rendered null and void if the covered Product is used or moved outside of the continental United States. Buyer is solely responsible for all shipping and handling costs, including insurance, and bears all risk of loss for Product or components of Product shipped to or from Company. Certain consumable parts are available for purchase from the Company and are not covered by this Contract. Buyers interested in purchasing consumable replacement parts may request a current product and price list from the Company. Receipt of a Product or components of Product from Buyer shall not be construed as the Company's acceptance of such goods for coverage under this Contract. Upon receipt of such goods, Company shall perform an evaluation and provide Buyer a written work order identifying both covered and non-covered parts and services. Buyer is solely responsible for payment of Company's then current price for repair and/or replacement of non-covered parts and problems.
Migun Healthy Mat User s Manual Healthy Mat ED-101 (Queen) EDM-202 (Full) Migun means beautiful health. www.migunworld.com 1-888-660-5948 Please read this instruction guide in whole. Understanding it will assist you in using this product safely and properly. Keep this instruction guide handy at all times for easy referral whenever you need it.