Fujikura- Single Fibre Fusion Splicer Features Core-to Core alignment, Dual Axis observation system. World s quickest splicing 6sec. / tube-heating 9sec. Minimal manual operation. Splice in 4 steps. Multi-functional carrying case with integrated work station. Absolute robustness. Six directional shock resistant. Rain and dust resistant. Automated wind-protector Automated wind-protector
Fujikura- Single Fibre Fusion Splicer SPECIFICATIONS Applicable fibres Cladding diameter Cleave length Splice mode / heating mode Splice loss Splice time / tube heating time No. of splice / heating per battery full charge Electrode life Size / weight Operating condition Resistance features Other features Terminals Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655) 80-150µm 5mm to 16mm with sheath clamp Total 100 splice modes / 30 heating modes 0.01dB (SM), 0.01dB (MM), 0.03dB (DS) and 0.03dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards Typical 6sec with SM ULTRAFAST / Typical 9sec with Slim (60mm) sleeve Splice result storage Last 20 000 splices Viewing methods / magnification 2 axis CMOS camera with 4.73 colour LCD. X / Y (320 x magnification), or both X and Y simultaneously (200 x magnification) Tension test 1.96 to 2.25N Applicable protection sleeve ACCESSORIES High precision single fibre cleaver High precision fibre cleaver Primary coat stripper Nylon jacket stripper Thermal jacket stripper Protection sleeve OPTIONAL ITEMS Fibre holder Sheath clamp Battery pack Battery charge cord DC power cord Electrodes J-Plate 60mm, 40mm and Fujikura micro sleeves Typical 200 cycles with BTR-09 5000 splices CT-06 (for single fibre) 46W x 159D x 150H (mm) / 2.7kg (including battery) Altitude: 0 to 5,000m above sea level, Wind: 15m/sec Temperature: -10 to 50 C, Humidity: 0 to 95%RH, non-dew Shock: 76cm all surface drop Dust: Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain: H=10mm/hr for 10min, IPX2 PC software upgrade / data management (Lifetime free) USB 2.0 (Mini-B type) connector for PC communication 6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply CT-30 (for single to 12 ribbon fibres) PS-02 JS-01 HJS-02, HJS-03 FP-03 / 03 (L=40) and FPS01 series FH-60-250 (coating dia. 250 μm) FH-60-900 (coating dia. 900 μm) FH-60-DC250 (coating dia. of 250μm in drop cable) FH-FC-20 (coating dia. of 900μm in 2.0mm Sheath dia.) FH-FC-30 (coating dia. of 900μm in 3.0mm Sheath dia.) FH-60-LT900 (900μm dia. loose buffer fibre) CLAMP-S70C (inc in standard package) CLAMP-S70D (900µm dia. loose buffer fibre) BTR-09 (Li-ion) DCC-18 DCC-12 (for cigar-socket) DCC-13 (with alligator clamp) JP-06 SET 2pcs STANDARD PACKAGE Waning and cautions Alcohol pot Q-/19S-E STANDARD PACKAGE SD-01 M-70 (Manual and PC software) Q-/19S-E (English) USB-01 AP-01 SD-01 USB-01 M-70 AP-01 Q'ty
Fujikura- KIT A Splicer kit with BTR-09 M-70 Q-/19S-E USB-01 AP-01 SD-01 Q-/19S-E (English) Warning and cautions AP-01 SD-01 Battery BTR-09
Fujikura- KIT B Splicer kit with CT-06A CT-06A BTR-09 M-70 Q-/19S-E USB-01 AP-01 SD-01 Q-/19S-E (English) Warning and cautions AP-01 SD-01 Battery BTR-09 CT-06A
Fujikura- Kit c combo kit Combines the world s quickest splicing machine with a OTDR famous for its ease of use Robustness - both splicer and OTDR come in a protective case Versatility - AFL M210e quad OTDR measures 850/1300/1310/1550 nm. Ideal for testing, troubleshooting and documenting enterprise, LAN/WAN, Campus and military single mode and multimode fibre networks Built in Optical Power Meter, Optical Light Source and Visual Fault Locator Combines Kit A or Kit B with the OTDR Perfect for certification M210e Q-/19S-E (English) Warning and cautions AP-01 AFL Carrying Case Hard or Soft SD-01 / CT-06A AFL Quad OTDR M210e - 25K - 01 - HC Battery BTR-09