Fire Alarm Systems FPA 5000 With Fnctional Modles FPA 5000 With Fnctional Modles www.boschsecrity.com Modlar configration allowing for easy extension nterconnection of p to 32 Panel Controllers, Remote Keypads, and OPC servers Mltiple CAN loop connection with highperformance Ethernet backbone and redndancy nstallation and ato-detection of fnctional modles by simply plgging them into the panel rail Connection to BS Bilding ntegration System via OPC server Thanks to the modlar configration, the innovative FPA 5000 Modlar Fire Panel easily adapts to local circmstances and reglations. De to the different fnctional modles, contry-specific characteristics are accommodated in the connection jst as qickly as the respective alarm handling. The fire panel is available with two different hosings: Hosing for monting directly on the wall Frame installation hosings which are fitted to the monting frame and can be swiveled. With the aid of special monting kits, the hosings can be monted in 482.6 mm (19") cabinets. All hosings can be extended with varios additional hosings for all conceivable applications. The FMR 5000 Remote Keypad offers the decentralized operation of a control panel or control panel network. Thanks to the external CAN and Ethernet interfaces, several Panel Controllers and Remote Keypads can be interconnected. Using either a single loop strctre or mltiple loop strctres with Ethernet backbone, the network can be adapted to nearly every application conditions. 1 2 CAN CAN/Ethernet Network 1 Fire panel 2 Remote Keypad Ethernet Additionally, the Ethernet interface allows for the connection to a Bilding Management System (BS Bosch Bilding ntegration System) via an OPC server. FPA 5000 systems can be connected to the Bosch UGM 2040 Universal Secrity System and ths, be integrated into a large network system. CAN CAN
MAN F AULT AUX1 AUX3 AUX2 N O U T AUX3 +- +- FAULT +- N O U T +- - OUT1 N1+ + AUX2 - - OUT2 N2+ ZONE4 ZONE3 ZONE2 ZONE1 OUT3 N3+ AUX4 OUT4+ N4+ - - - OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 N1 N2 N3 N4 N5 N6 N7 N8 a -b + a -b + AU XL1 S N AU 1 X L 2 S N 2 NC1 C1 NO1 F1 RELAS2 RELAS1 FB1 F2 FB2 NC2 C2 NO2 F ire Test City Tie City Tie Falt Grond Falt Battery Falt Power Troble Signal Silence Bypassed Spervisory? 7 8 9 PQRS TUV WXYZ * 1 ABC 2 DEF 3 4 5 6 GH JK MNO 0 # 2 FPA 5000 With Fnctional Modles The entire fire detection system is configred via a laptop sing the FSP-5000-RPS programming software. L M Batteries Remote Keypad System overview Fnctions E BCM0A +- AUX1 +- +- AUX4 +- AUX5 AUX6 NETZEN NETZSTROM BATERE1 BATERE2 +- +- BAT1 +- BAT2 FAULT BAT1 AC A OP08A C B D Operation / processing of messages The operation and the processing of all messages are easy and intitive thanks to the ergonomicallydesigned control panel with its TFT toch screen offering a men-driven handling and mlti-color display. To that end, there are permanently located keys on the right, bottom, and pper edge of the display as well as variably located virtal keys in the toch-screen area. F G P o s. A B C D E F G CZM0004A Description LSN 0 3 0 0 A A Fnctional Modles Address Cards Panel Controller Distribtor, optional Panel Rail Short AN016A RMH0002A Power Spply Bracket (installed in Frame nstallation Hosings exworks) Power Spply H Hosing (in this case: HCP 0006 A) Panel Rail Long M L H Modlar Strctre of the FPA 5000 Modlar Fire Panel De to its modlar strctre, the FPA 5000 Modlar Fire Panel provides complete flexibility and ths cstomized soltions for any application. Depending on the reqirements, the following selection can be made when planning: 1. Hosing type: Frame installation or wall-mont Selection of a basic hosing Optional Extension Hosings Optional Power Spply Hosings Optional kits for installation in 482.6 mm (19") racks 2. Operating and Display Unit with Panel Controller Selection from the varios langage variants 3. Panel Rail Selection according to hosing type and/or nmber of reqired fnctional modles 4. Fnctional modles Selection based on planning and contry-specific reqirements 5. Power spply Batteries Additional power spply facilities Power Spply Brackets are preinstalled ex-works for Frame nstallation Hosings For Wall-mont Hosings, Power Spply Brackets are selected as needed 6. Additional accessories Front Doors Printer with Frame nstallation Hosing Cable Sets for special applications Modles The fnctional modles are atonomos, encapslated nits that can be inserted into any control panel slot sing "plg-and-play" technology. Ths, the power spply and the data traffic to the control panel are indicated atomatically withot any additional settings. The modle is atomatically identified by the control panel and fnctions in the defalt operating mode. Wiring to external components is performed sing compact connector/screw terminals. After a replacement, only the connectors need to be reinserted; extensive rewiring is no longer reqired.
3 FPA 5000 With Fnctional Modles Modle BCM 0000 B AN 0016 A LSN 0300 A LSN 1500 A FPE 5000 UGM CZM 0004 A OS 0020 A OS 0232 A ENO 0000 B OP 0008 A RML 0008 A RMH 0002 A NZM 0002 A Description Battery Controller Modle modle that controls batteries and power spply Annnciator Modle with 16 red and 16 yellow LEDs, freely programmable LSN improved Modle 300 ma for the connection of an LSN loop with p to 254 LSN improved elements or 127 standard LSN elements, maximm line crrent 300 ma LSN improved Modl 1500 ma for the connection of an LSN loop with p to 254 LSN improved elements, maximm line crrent 1500 ma, or with p to 127 standard LSN elements, maximm line crrent 300 ma nterface Modle for the connection to a UGM 2020 System 4 Zone Conventional Modle for the connection of existing conventional peripherals, with for monitored conventional lines 20 ma Commnication Modle sports an S20 interface, an RS232 interface and an S1 interface for a connection with a voice alarm system Plena via RS232 RS232 Commnication Modle with two RS323 interfaces for a connection with a voice alarm system Plena, a printer or laptop Fire Service nterface Modle for the connection to fire service eqipment according to DN 14675 npt/otpt Modle with 8 digital inpts and 8 open collector otpts Relay Modle with 8 relays for low voltage applications Relay Modle with 2 relays for mains power (250 V) and with feedback inpts (can also be sed as an interface to extingishing systems) Notification Appliance Zone Modle with two monitored primary lines Networking Up to 32 Panel Controllers, Remote Keypads and OPC server can be interconnected within a network. Depending on the application reqirements, Panel Controllers and Remote Keypads can be groped, defined as network node or local node. Within a grop, only panel conditions of the same grop can be displayed. Regardless of the grops, network nodes allow for the display and handling of all panel conditions. Local nodes display the conditions of the related panel. When networking via CAN and/or Ethernet interfaces, the following connection topologies are optional: Redndant loop via CAN1 and CAN2 (max. 32 nodes) Ethernet loop (max. 32 nodes) Mltiple CAN loops with Ethernet backbone and p to 32 nodes For networking with optical fibers, yo can se varios converters. For detailed information on sitable converter types and maximm line lengths, refer to the FPA-5000 Networking Gide (available for download). Detection Points The Address Cards activate detection points. The FPA 5000 governs p to 4096 detection points. Each element and inpt which, after the programming, is able to set off an alarm reqires a detection point. npts are considered as detection points if they are programmed accordingly in the FSP 5000 RPS Programming Software. This applies to all manal call points and atomatic detectors as well as to the following modles and interfaces becase of their inpts: Modles CZM 0004 A p to 4 OP 0008 A p to 8 ENO 0000 B nterfaces FLM-420/4-CON p to 2 FLM-420-8R1-S p to 8 FLM-420-2 p to 2 FLM-420-O82-S p to 2 FLM-420-O11 p to 1 FLM-420-RLE-S p to 2 FLM-420-EOL-2W-W Detection Points reqires a detection point only if a FSE release element is connected and programmed via the FSP-5000-RPS programming software Detection Points 1 detection point for each interface The following interfaces do not reqire the allocation of detection points: FLM 420 NAC, FLM 420 RHV, FLM 420 RLV1, FLM 420 RLV8, FLM 420 O2. Signaling devices and otpts have no detection points! Certifications and approvals The provided options according to EN 54 2:1997/ A1:2006 inclde: Otpt to fire alarm devices
4 FPA 5000 With Fnctional Modles Control of fire alarm roting eqipment Otpt to fire alarm roting eqipment Alarm confirmation inpt from fire alarm roting eqipment Otpts to fire protection eqipment Otpt type A Otpt type B Otpt type C Falt monitoring of fire protection eqipment Delays to otpts Dependencies on more than one alarm signal Type A dependency Type B dependency Alarm conter Falt warning condition Falt signals from points Total loss of the power spply Otpt to falt warning roting eqipment Disabled condition Disablement of adressable points Test condition Region Certification Germany VdS-S S205106 BS FPA 4620/DT/2010 FPA-5000 Germany VdS G 205106 FPA-5000_G205106 DBt DBt Z-6.5-2027 (B) FSA 5000 LSN Z-6.5-2027 (E) FSA 5000 LSN Switzerland VKF AEA 19197 FPA-1200_FPA-5000 Brandmeldesystem Erope CE FPA-5000 CPD 0786-CPD-20818 FPA 5000 Astria PFB 007/BM-PSys/019 FPA-1200/5000 Brandmeldesystem PFB PFB 007/BM-PSys/020 FPA-1200/5000 Brandfallsteerzentrale 007/BM-PSys/021 FPA-5000 Hierarchie Belgim BOSEC TCC2-894/a FPA 1200_FPA 5000 Poland CNBOP 1793/2013 FPA-5000 Denmark DANAK 232.234 FPA 5000/1200 system certifikat EN54-13 Czech Repblic TZÚS 080-011414 FPA-5000 Hngary TMT TMT-32/2005 FPA-5000 Ukraine MOE UA1.016.0008784-11 FPA-5000 MOE UA1.016.0137711-13 FPA-5000 Singapore PSB CLS1B 13068137901 FPA-5000 nstallation/configration notes Contry-specific standards and gidelines mst be considered dring planning. Connection conditions for the regional athorities and instittions (police, fire service) mst be maintained. t is preferable to se the loop formation owing to the greater secrity of loop lines compared with stb lines. t is possible to combine LSN interface modles and LSN detectors on one loop or stb line. For a mixed connection of LSN classic elements and LSN improved elements, a maximm of 127 elements are permitted. Existing conventional detectors can be connected to a CZM 0004 A modle. A CZM 0004 A modle provides for DC primary lines (zones). n accordance with EN 54 2, control panels with more than 512 detectors / call points mst be connected redndantly. To that end, a second basic hosing with a second MPC Panel Controller is sed. For operation of the fire detection system according to EN 54 13, it is necessary to terminate every stb and T-tap with EOL-modles. General System Limits Control Panels/Remote Keypads/OPC server in network Max. nmber Redndant CAN loop 32 Ethernet loop 32 Mltiple CAN loop with Ethernet backbone Bs topology 8 Detection points / detector zones Stand-alone 4096 n network 32512 n network, per control panel 2032 Limits per Fire Panel Sets, e.g. bypass grop 128 Total nmber of modles, per control panel 46 Printer 4 Alarm conter (external, internal, revision) 3 Nmber of entries in the event database 10000 FSP-5000-RPS programming interface 1 Time control channel 20 Time control programs 19 Programming defined days 365 User 200 Access level 4 32
5 FPA 5000 With Fnctional Modles System Limits Fnctional Modles Fnctional modle Max. nmber BCM-0000-B 8 AN 0016 A 32 LSN 0300 A 32 LSN 1500 A 11 FPE-5000-UGM 4 CZM 0004 A 32 OS 0020 A 4 OS 0232 A 4 ENO 0000 B 8 OP 0008 A 32 RML 0008 A 32 RMH 0002 A 32 NZM 0002 A 8 System Limits for each LSN 0300 A Modle Up to 254 LSN improved version elements or 127 classic LSN elements can be connected Otpt crrent LSN 0300 A: p to 300 ma LSN 1500 A: p to 1500 ma Cable length LSN 0300 A: p to 1600 m LSN 1500 A: p to 3000 m Unshielded cables can be sed Notice Owing to the FSD (Fire System Designer) programming software, the planning of fire panels in compliance with the limits (e.g. concerning cable length and power spply) is qick and easy. nstallation Notes Fire panels can only be installed in dry, clean interior rooms. To ensre optimm battery service life, the control panel shold only be operated at sites with normal room temperatres. The following environmental conditions mst be noted: Permissible ambient temperatre: -5 C 50 C Permissible relative hmidity: Max. 95 %, non-condensing Operating and display elements shold be located at eye level. Frame installation hosings reqire at least 230 mm free space on the right next to the last hosing; this space is for swiveling ot the attached hosing for connection, maintenance, and service. Sfficient space shold be left nderneath and next to the control panel for any possible extensions, e.g. for an additional power spply or an extension hosing. Do not operate devices showing condensation. Only se the monting materials specified by BOSCH ST. nterference resistance cannot otherwise be garanteed. f connected to a Bilding Management System (BS Bosch Bilding ntegration System) via the Ethernet and an OPC server, please verify with the responsible network administrator that in case of a network spanning mltiple bildings the network is designed for connections across mltiple bildings (e.g. no interference by different potentials of the grond connection) all sers are assigned to the network. Ordering information BCM 0000 B Battery Controller Modle monitors the power spply of the fire panel and the charging of the batteries Order nmber BCM-0000-B AN 0016 A Annnciator Modle displays the stats of 16 individally programmable detection points Order nmber AN 0016 A LSN 0300 A LSN improved Modle 300 ma for connecting an LSN loop with p to 254 LSN improved elements or 127 classic LSN elements, with a maximm line crrent of 300 ma Order nmber LSN 0300 A LSN 1500 A LSN improved Modle 1500 ma for connecting an LSN loop with p to 254 LSN improved elements with a maximm line crrent of 1500 ma, or with p to 127 classic LSN elements, with a maximm line crrent of 300 ma Order nmber LSN 1500 A FPE 5000 UGM nterface Modle for connecting the fire panels FPA 5000 and FPA-1200 to sperordinate systems (UGM 2020, FAT 2002/RE, FSM 2000) Order nmber FPE-5000-UGM CZM 0004 A 4 Zone Conventional Modle for connecting conventional peripherals; provides for monitored conventional lines Order nmber CZM 0004 A OS 0020 A 20 ma Commnication Modle provides one interface each of S20, RS232 and S1 Order nmber OS 0020 A OS 0232 A RS232 Commnication Modle for connecting two devices, e.g. voice alarm system Plena, a laptop or a printer, via two independent serial interfaces Order nmber OS 0232 A
6 FPA 5000 With Fnctional Modles ENO 0000 B Fire Service nterface Modle for connecting fire service eqipment in compliance with DN 14675 Order nmber ENO 0000 B CPA 0000 A Cable Set AT 2000 Used to connect an AT 2000 to the MPC and the ENO 0000 B. Order nmber CPA 0000 A OP 0008 A npt/otpt Modle for individal displays or flexible connection of varios electrical devices, providing eight independent digital inpts and eight open collector otpts Order nmber OP 0008 A RML 0008 A Relay Modle provides 8 change-over contact relays (type C) for low voltage Order nmber RML 0008 A RMH 0002 A Relay Modle provides 2 change-over contact relays (type C) for high voltage, for monitored connection of external elements with feedback Order nmber RMH 0002 A NZM 0002 A Notification Appliance Zone Modle for connecting 2 separate notification appliance zone lines, provides 2 monitored primary lines Order nmber NZM 0002 A NMC 0000 A Cable HPD/NZM Used for synchronization in accordance with UL reqirements, cable length 90 cm Order nmber NMC 0000 A Accessories FLM-320-EOL2W Conventional EOL Modle 2-Wire for EN 54 13 compliant termination of conventional lines Order nmber FLM-320-EOL2W FLM-420-EOL2W-W EOL Modle LSN for EN 54 13 compliant termination of LSN stbs or T- taps Order nmber FLM-420-EOL2W-W FDP 0001 A Dmmy Cover Plate For available modle slots Order nmber FDP 0001 A PSK 0001 A Labelling Strips, Wide 20 sheets each with 6 strips, printable, for the fnctional modles BCM 0000 B, LSN 0300 A, LSN 1500 A, CZM 0004 A, NZM 0002 A, RMH 0002 A, CTM 0002 A and ENO 0000 B Order nmber PSK 0001 A PSL 0001 A Labelling Strips, Small 20 sheets each with 10 strips, printable, for the AN 0016 A Annnciator Modle Order nmber PSL 0001 A
7 FPA 5000 With Fnctional Modles Represented by: Americas: Erope, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Secrity Systems, nc. Bosch Secrity Systems B.V. Robert Bosch (SEA) Pte Ltd, Secrity Bosch (Shanghai) Secrity Systems Ltd. Robert Bosch Ltda Secrity Systems Division 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 secrity.sales@s.bosch.com www.boschsecrity.s P.O. Box 80002 5617 BA Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.secritysystems@bosch.com www.boschsecrity.com Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.secritysystems@bosch.com www.boschsecrity.asia 203 Bilding, No. 333 Fqan Road North BP Changning District, Shanghai 200335 China Phone +86 21 22181111 Fax: +86 21 22182398 www.boschsecrity.com.cn Via Anhangera, Km 98 CEP 13065-900 Campinas, Sao Palo, Brazil Phone: +55 19 2103 2860 Fax: +55 19 2103 2862 latam.boschsecrity@bosch.com www.boschsecrity.com Bosch Secrity Systems 2015 Data sbject to change withot notice 1218214923 en, V22, 07. Oct 2015