uel Manager Diesel uel iltration M, M0, M00 and M000 Complete Systems, s, Parts and Pricing uel Manager diesel fuel filter/water separator systems are used globally in a wide variety of diesel engine powered applications. As a modular system, optional uel Manager features can be selected to address specific operating requirements. This versatility allows the user to have the optimum fuel system filtration combined with exceptional economy. The uel Manager series includes: M, M0, M00 and M000. ach of these uel Manager types serve specific engine power ratings for engines from 7.3 to 447 kw (0 to 600 BHP). All uel Manager elements are fuel/water separators with provisions for draining coalesced water. Systems are for use with diesel fuel and bio-blended diesel fuel, and are not for use with gasoline or other volatile fuels. ach member of the fuel manager series is described herein with details regarding complete filtration systems, modular components, service parts and general installation and operational information. A glossary of terms is provided to assist in clarifying some of the nomenclature used in this publication. or additional filtration information reference uel Manager Brochure 99889, uel Manager Cross Reference Guide 99642 and the uel Manager uel ilters/water Separators Brochure 99966. IMPORTANT! The elements and header assemblies listed herein are considered to be for Service use and are not compatible with uel Manager components used by our OM customers. CLARCOR ngine Mobile Group. 4400 ast Highway 30, Kearney, N 68847; www.clarcorems.com 99920B
Glossary of Terms Air Vent Plug: ach M system has a vent plug incorporated into the header assembly that is turned /2 3/4 turn to activate the air egress process and lightly tightened once complete. nhanced Retention System (RS): A unique shape and indexing arrangement that provides superior element retention while augmenting Stanadyne s patented Key Track system. nhanced Retention System RS Identification Key Track System Unique Shape ilter Location or Use: The ideal diesel fuel supply system should contain a pre-filter (primary) and a separate final (secondary) filtration system, as shown in the igure below. Pre-filters are typically rated as 50, 30, 0 microns where final filters are either 5 or 2 microns. Some situations may require the use of only one filter. In these cases an optional, serviceable pre-filter screen is available. ilter Location or Use low Direction: uel flow through the header and element assembly are classified into two types: Normal and Reverse. A Normal flow header assembly has one inlet and one outlet port on each side, where internally the fuel flows thru the center tube then through the media. A Reverse flow header assembly has both inlet ports in the front and both outlet ports in the rear (toward the mounting flange). Internally the fuel flows thru the media first then out thru the center tube. ilter systems with optional electric lift/supply pumps must use a reverse flow type of system to ensure fuel is filtered prior to entering the pump. Top Load: A type of M00 systems where the element is serviced thru the top of the header assembly instead of from underneath, as shown in the illustration below. low Direction M00 Top Load Service Thru Top of Header Lock Ring uel Water Header Media: Most of the media used in our replacement elements is wet laid material, unless specified as High fficiency (H) in the Micron Rating column. - -
M ngine power rating: 0 to 55 HP (7.5 to 4 kw) Max. fuel flow rate: 25 US gallons/hour (95 liters/hour) Max. operating pressure: 20 P.S.I. (38 kpa) Integral 8mm barbed fittings for flex hose use Corrosion resistant polymer header assembly Configurations for Pre-ilter and inal ilter usage Patented Twist on element retention design Ideal for smaller On-Off Road, Agricultural and Industrial applications. All systems and replacement elements are Reverse low configuration. M Complete ilter/separator Systems System Part No. Use Micron Rating Components M Service Replacement s Part No. Pkg. Length Dim. A 2 Dim B 2 Qty. 40074 inal ilter 5 Air Vent Plug 40072 3.6 (9.4) 5.9 (49.6) 5.3 (33.6) 4467 inal ilter 5 Water Collection Bowl, Air Vent plug 40072 3.6 (9.4) 7.6 (93.0) 7.0 (78.2) 4245 Pre-ilter 30 Air Vent Plug 4240 3.6 (9.4) 5.9 (49.6) 5.3 (33.6) Part No. Use Micron Rating Length Pkg. Qty. 40070 inal ilter 5 2.8 (7.) 2 40072 inal ilter 5 3.6 (9.4) 2 40096 inal ilter 5 4.3 (09.2) 2 4239 Pre-ilter 30 2.8 (7.) 2 4240 Pre-ilter 30 3.6 (9.4) 2 424 Pre-ilter 30 4.3 (09.2) 2 M Components B Header Assembly C (See Table Above) H J G A D Water Collection Bowl Seal Kit G I M Service Parts Component Reference Description Part No. Pkg. Qty. A Complete Water Collection Bowl Kit 29899 B Plastic Air Vent Plug 2869 6 C O-Ring - Air Vent Plug 3494 0 D Water Collection Bowl Seal Kit (Contains 6 each of seals,, H, J ) 30448 O-Ring - ilter element to water collection bowl header 059 0 Sealing Washer - Three Lobed seal for all plastic drain valves 3200 5 G O-Ring - Plastic drain valve Only available Separately 2920 5 H O-Ring - Water collection bowl to water collection bowl header 3498 5 I Plastic Drain Valve Kit 32003 J O-Ring - Collection bowl draw bolt 309 5 Reference Glossary of Terms on page. 2 Reference M Dimensions on page. - 2 -
M0 M0 Complete ilter/separator Systems System Part No. Use Micron Rating low Direction ngine power rating: 0 to 200 HP (7.5 to 50 kw) Max. fuel flow rate: 50 US gallons/hour (90 liters/hour) Max. operating pressure: 30 P.S.I. (200 kpa) Integral 8mm barbed fittings for flex hose use Corrosion resistant polymer header assembly or use as a inal ilter Patented Twist on element retention design conomical and environmentally friendly Components Part No. Pkg. Length Dim. A 2 Dim B 2 Qty. 3669 inal ilter 5 Normal Air Vent Plug 36682 2.8 (7.) 6.6 (67.6) 4.7 (9.4) 36996 inal ilter 5 Normal Air vent plug 35746 4.3 (09.2) 8. (205.7) 6.2 (57.5) 37865 inal ilter 5 Normal Water Collection Bowl, Air vent plug 36682 2.8 (7.) 8.5 (27.7) 6.6 (69.5) M0 Service Replacement s Part No. Use Micron Rating low Direction Length Pkg. Qty. 38680 Pre-ilter 30 Normal 3.6 (9.4) 2 36682 inal ilter 5 Normal 2.8 (7.) 2 35746 inal ilter 5 Normal 4.3 (09.2) 2 36995 inal ilter 5 Reverse 5. (29.5) 2 38640 inal ilter 5 Reverse 6.0 (52.4) 2 36994 inal ilter 2 Reverse 6.0 (52.4) 2 Reference Glossary of Terms on page. 2 Reference M0 Dimensions on page. M0 Components C K Header Assembly B H (See Table Above) J G A D Water Collection Bowl Seal Kit G I M0 Service Parts Component Reference Description Part No. Pkg. Qty. A Complete Water Collection Bowl Kit 29899 B Plastic Air Vent Plug 2869 6 C O-Ring - Air Vent Plug 3494 0 D Water Collection Bowl Seal Kit (Contains 6 each of seals,, H, J ) 30448 O-Ring - ilter element to water collection bowl header 059 0 Sealing Washer - Three Lobed seal for all plastic drain valves 3200 5 G O-Ring - Plastic drain valve Only available Separately 2920 5 H O-Ring - Water collection bowl to water collection bowl header 3498 5 I Plastic Drain Valve Kit 32003 J O-Ring - Collection bowl draw bolt 309 5 K Header Assembly, Kit 3837 Reference Glossary of Terms on page. 2 Reference M Dimensions on page 2. - 3 -
M 00 ngine power rating: 50 to 350 HP (37 to 26 kw) Max. fuel flow rate: 80 US gallons/hour (300 liters/hour) Max. operating pressure: 60 P.S.I. (43 kpa) Top Load: Max. ngine power 325 HP (243.75 kw), max. fuel flow 75 g/h (283 l/h) Water separation efficiency: Up to 95% of whole water separation Heavy duty aluminum header assemblies with a variety of threads sizes and port configurations available Optional modular features (Heaters, Primer Pumps, WI Sensors, etc.) s available in different sizes and micron ratings MARIN systems and components have enhanced corrosion resistant coatings and conform to U.S.C.G. regulations NOT: nhanced Retention System (RS) elements are not compatible with other elements or headers. M00 Complete ilter/water Separator Systems System Use Micron low Port Size Components Dim. A 2 Dim B 2 Pkg. 35599 Pre- 50 N 3/8-8 NPT Air Vent Plug 3649 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 33640 Pre- 50 N 3/8-8 NPT Collection Bowl, Air Vent Plug 3369 3.6 (9.4) 8. (205.7) 6.2 (57.5) 3487 Pre- 50 N M2 x.5 Collection Bowl, Air Vent Plug 3369 3.6 (9.4) 8. (205.7) 6.2 (57.5) 3488 Pre- 50 N M4 x.5 Collection Bowl, Air Vent Plug 3369 3.6 (9.4) 8. (205.7) 6.2 (57.5) 3386 Pre- 30 N /4-8 NPT Collection Bowl, Air Vent Plug 3865 4.3 (09.2).3 (286.5) 9.4 (239.0) 40954 Pre- 30 R /4-8 NPT Collection Bowl, Air Vent Plug 3504 4.3 (09.2).3 (286.5) 9.4 (239.0) 42093 Pre- 30 N /4-8 NPT Collection Bowl, Air Vent Plug 3863 3.6 (9.4) 0.6 (269.0) 8.7 (22.6) 43097 Pre- 30 N /4-8 NPT Coll. Bowl, Air Vent Plug, RS 4306 4.3 (09.2).3 (286.5) 9.4 (239.0) 39452 Pre- 30 N 3/8-8 NPT Collection Bowl, Air Vent Plug 3865 4.3 (09.2).3 (286.5) 9.4 (239.0) 3364 Pre- 30 N 3/8-8 NPT Air Vent Plug 3865 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 3489 Pre- 30 N M2 x.5 Air Vent Plug 3865 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 434 Pre- 30 R M2 x.5 Collection Bowl, Air Vent Plug 3504 4.3 (09.2).3 (286.5) 9.4 (239.0) 34820 Pre- 30 N M4 x.5 Air Vent Plug 3865 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 40253 Pre- 30 R M4 x.5 Air Vent Plug - RS 37294 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 42049 Pre- 30 N M4 x.5 Collection Bowl, Air Vent Plug 3865 4.3 (09.2).3 (286.5) 9.4 (239.0) 4343 Pre- 30 R M4 x.5 Collection Bowl, Air Vent Plug 3504 4.3 (09.2).3 (286.5) 9.4 (239.0) 43698 Pre- 0 R /4-8 NPT Collection Bowl, Air Vent 43697 4.3 (09.2).3 (286.5) 9.4 (239.0) 29367 inal 5 N In:3/8 (90 ) Top Load, 00 Watt Heater, 2 372 3.6 (9.4) 2.3 (32.4) 7.9 (200.6) 3048 inal 5 N In: 3/8 (0 ) Top Load, 00 Watt Heater, 2 372 3.6 (9.4) 2.3 (32.4) 7.9 (200.6) 35726 inal 5 N /4-8 NPT Collection Bowl, Air Vent Plug 3368 2.8 (7.) 9.7 (248.4) 7.9 (20.0) 44760 inal 5 N /4-8 NPT Collection Bowl, Air Vent Plug 387 3.6 (9.4) 0.6 (269.0) 8.7 (22.6) 38630 inal 5 N /4-8 NPT Hand Primer, Air Vent Plug 3368 2.8 (7.) 7.8 (98.4) 5.9 (50.9) 33642 inal 5 N 3/8-8 NPT Air Vent Plug 3873 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 3482 inal 5 N M2 x.5 Air Vent Plug 3873 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 34822 inal 5 N M4 x.5 Air Vent Plug 3873 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 43374 inal 5 N M4 x.5 Collection Bowl, Air Vent Plug 43373 3.6 (9.4) 0.6 (269.0) 8.7 (22.6) 36694 inal 2 N /4-8 NPT Air Vent Plug 36693 2.8 (7.) 7.8 (98.4) 5.9 (50.9) 42050 inal 2 R M4 x.5 Collection Bowl, Air Vent Plug 3602 6.0 (52.4) 2.2 (309.8).2 (284.5) 42533 inal 2 N /4-8 NPT Collection Bowl, Air Vent Plug 36693 2.8 (7.) 9.8 (249.9) 8.0 (202.6) 43098 inal 2 N /4-8 NPT Coll. Bowl, Air Vent Plug, RS 4307 4.3 (09.2).3 (286.5) 9.4 (239.0) M00 MARIN ilter/water Separator Systems 33643 Pre- 50 N 3/8-8 NPT Marine Drain Valve, Vent plug 32200 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 40957 Pre- 30 R /4-8 NPT Marine Drain Valve, Vent plug 40958 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 33644 Pre- 30 N 3/8-8 NPT Marine Drain Valve, Vent plug 3277 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 4342 Pre- 30 R M2 x.5 Marine Drain Valve, Vent plug 40958 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 4344 Pre- 30 R M4 x.5 Marine Drain Valve, Vent plug 40958 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) 33645 inal 5 N 3/8-8 NPT Marine Drain Valve, Vent plug 3278 4.3 (09.2) 9.3 (236.5) 7.4 (89.4) - 4 -
M 00 With lectric Lift Pump (see page 8 & 9 for available lift pump kits) inal filter assemblies for aftermarket use where an electric lift pump and higher fuel flow rates are desired. or ngine Sizes from 50 to 350 Horsepower (37 to 26 kw) Typically, Includes a Water Collection Bowl with plastic drain valve. Heavy-Duty aluminum headers with anti-corrosion coating. Reverse low for extended pump life. Lift Pump Requirements: Power: 2 Volt, 4 Amp Circuit: used, Switched (Key On = constant power). Includes; five feet (.5m) of 8 gauge wire harness (2 wire) with mating terminal connector. Two Types of Lift Pump Assemblies Available: (Brush or Brushless) Maximum System low up to 80 gallons per hour. Assemblies contain a Non-Adjustable Internal Pressure Regulator NOT direct replacements for OM uel Manager systems. M00 ilter/water Separator Systems with lectric Lift Pumps System Part No. Use Micron Rating low Port Size Components 33945 inal 5 R /4-8 NPT 39359 inal 5 R M4 x.5 M6 x.5 4775 inal 5 R /4-8 NPT 42468 inal 5 R /4-8 NPT 42946 inal 2 R 3/8-8 NPT 42963 inal 2 R /2-20 UN Lift Pump (Brush), 40 gph flow, 8 psi pressure regulator Collection Bowl, Vent Plug Lift Pump (Brush), 40 gph flow, 7 psi pressure regulator Collection Bow, Vent Plug Lift Pump (Brushless), 80 gph flow, 0 psi pressure regulator, Collection Bowl, Vent Plug Lift Pump (Brushless), 80 gph flow, 7 psi pressure regulator, Collection Bowl, Vent Plug Lift Pump (Brushless), 80 gph flow, 7 psi pressure regulator, Vent Plug Lift Pump (Brushless), 80 gph flow, 0 psi pressure regulator, Vent Plug Part No. Pkg. Length Dim. A 2 Dim B 2 Qty. 33959 4.3 (09.2).3 (286.5) 9.4 (239.0) 39442 6.0 (52.4) 2.9 (328.7). (28.2) 33959 4.3 (09.2).3 (286.5) 9.4 (239.0) 33959 4.3 (09.2).3 (286.5) 9.4 (239.0) 42944 6.0 (52.4) 2.9 (328.7). (28.2) 42944 6.0 (52.4) 2.9 (328.7). (28.2) Reference Glossary of Terms on page (N = Normal, R= Reverse, H = High fficiency media). 2 Reference M00 Dimensions on page 2. M00 Service Replacement s Part No. Use Micron Rating low Direction Length Retention Pkg. Qty. 3369 Pre-ilter 50 Normal 3.6 (9.4) Original 2 3649 Pre-ilter 50 Normal 4.3 (09.2) Original 2 3648 Pre-ilter 50 Normal 6.0 (52.4) Original 2 33962 Pre-ilter 50 Reverse 3.6 (9.4) Original 2 33963 Pre-ilter 50 Reverse 4.3 (09.2) Original 2 33965 Pre-ilter 50 Reverse 6.0 (52.4) Original 2 39870 Pre-ilter 50 Reverse 4.3 (09.2) RS 2 3863 Pre-ilter 30 Normal 3.6 (9.4) Original 2 3865 Pre-ilter 30 Normal 4.3 (09.2) Original 2 3867 Pre-ilter 30 Normal 5. (29.5) Original 2 3869 Pre-ilter 30 Normal 6.0 (52.4) Original 2 37079 Pre-ilter 30 Normal 3.6 (9.4) RS 2 3680 Pre-ilter 30 Normal 4.3 (09.2) RS 2 4306 Pre-ilter 30 Normal 4.3 (09.2) RS 2 34878 Pre-ilter 30 Reverse 3.6 (9.4) Original 2-5 -
M00 Service Replacement s (continued) Part No. Use Micron Rating low Direction Length Retention Pkg. Qty. 3504 Pre-ilter 30 Reverse 4.3 (09.2) Original 2 35632 Pre-ilter 30 Reverse 5. (29.5) Original 2 35634 Pre-ilter 30 Reverse 6.0 (52.4) Original 2 37294 Pre-ilter 30 Reverse 4.3 (09.2) RS 2 37296 Pre-ilter 30 Reverse 5. (29.5) RS 2 37302 Pre-ilter 30 Reverse 6.0 (52.4) RS 2 43225 Pre-ilter 0 (H) Reverse 6.0 (52.4) RS 2 43950 Pre-ilter 0 (H) Reverse 4.3 (09.2) RS 2 37258 Pre-ilter 0 Reverse 4.3 (09.2) Original 2 37255 Pre-ilter 0 Reverse 6.0 (52.4) Original 2 37300 Pre-ilter 0 Reverse 6.0 (52.4) RS 2 43697 Pre-ilter 0 Reverse 4.3 (09.2) Original 2 372 inal ilter 5 Normal 3.8 (96.0) Top Load 2 3368 inal ilter 5 Normal 2.8 (7.) Original 2 387 inal ilter 5 Normal 3.6 (9.4) Original 2 3873 inal ilter 5 Normal 4.3 (09.2) Original 2 3875 inal ilter 5 Normal 5. (29.5) Original 2 3877 inal ilter 5 Normal 6.0 (52.4) Original 2 37290 inal ilter 5 Normal 2.8 (7.) RS 2 37292 inal ilter 5 Normal 4.3 (09.2) RS 2 37299 inal ilter 5 Normal 6.0 (52.4) RS 2 43373 inal ilter 5 Normal 3.6 (9.4) Original 2 33957 inal ilter 5 Reverse 2.8 (7.) Original 2 33958 inal ilter 5 Reverse 3.6 (9.4) Original 2 33959 inal ilter 5 Reverse 4.3 (09.2) Original 2 33960 inal ilter 5 Reverse 5. (29.5) Original 2 3396 inal ilter 5 Reverse 6.0 (52.4) Original 2 3985 inal ilter 5 Reverse 4.3 (09.2) RS 2 39442 inal ilter 5 Reverse 6.0 (52.4) RS 2 36693 inal ilter 2 Normal 2.8 (7.) Original 2 3564 inal ilter 2 Normal 4.3 (09.2) Original 2 3562 inal ilter 2 Normal 6.0 (52.4) Original 2 3987 inal ilter 2 Normal 4.3 (09.2) RS 2 37297 inal ilter 2 Normal 6.0 (52.4) RS 2 4307 inal ilter 2 Normal 4.3 (09.2) RS 2 434 inal ilter 2 (H) Normal 6.0 (52.4) RS 2 42983 inal ilter 2 (H) Normal 4.3 (09.2) RS 2 43364 inal ilter 2 (H) Normal 4.3 (09.2) RS 2 3602 inal ilter 2 Reverse 6.0 (52.4) Original 2 42944 inal ilter 2 Reverse 6.0 (52.4) Original 2 M00 MARIN Replacement s Part No. Use Micron Rating low Direction Length Retention Pkg. Qty. 32200 Pre-ilter 50 Normal 4.3 (09.2) Original 2 3220 Pre-ilter 50 Normal 6.0 (52.4) Original 2 3277 Pre-ilter 30 Normal 4.3 (09.2) Original 2 3280 Pre-ilter 30 Normal 6.0 (52.4) Original 2 40958 Pre-ilter 30 Reverse 4.3 (09.2) Original 2 37293 Pre-ilter 0 Reverse 4.3 (09.2) RS 2 3730 Pre-ilter 0 Reverse 6.0 (52.4) RS 2 3278 inal ilter 5 Normal 4.3 (09.2) Original 2 3279 inal ilter 5 Normal 6.0 (52.4) Original 2 37295 inal ilter 5 Reverse 4.3 (09.2) RS 2 3729 inal ilter 2 Normal 4.3 (09.2) RS 2 37298 inal ilter 2 Normal 6.0 (52.4) RS 2 Reference Glossary of Terms on page (N = Normal, R= Reverse, H = High fficiency media). 2 Reference M00 Dimensions on page 2. - 6 -
M00 Components K M P Q N 5 See page 9 for details. Z Straight Inlet Port* P/N 372 N Angled Inlet Port* R L O R V X I O S W B See page 8 for details. C 4 Y T U X U K P N Q (See Tables on Pages 5 & 6) Z U2 * Top Load Headers not available separately. Replacement is by complete assembly only. Complete Assembly with Angled Inlet: P/N 29367 Complete Assembly with Straight Inlet: P/N 3048 TOP LOAD Systems I2 I3 I H J G A G I G D Water Collection Bowl Seal Kit M00 Service Parts Component Reference A Description Part No. Pkg. Qty. Water Bowel 29548 Water Collection Bowl Kit 29899 B Plastic plug, Air Vent 2869 6 C O-Ring for Air Vent Plug 3494 0 D Water Collection Bowl Seal Kit (Contains 6 each of seals,, H, J ) 30448 O-Ring for water collection bowl header to element 059 0 Sealing Washer - Three Lobed for plastic drain valves 3200 5 G O-Ring for Plastic Drain Valve Only available Separately 2920 5 H O-Ring for water collection bowl to bowl header 3498 5 I Plastic Drain Valve Kit 32003 J O-Ring - Collection bowl draw bolt 309 5 K Retaining Nut Small Diameter (Cap, Heater, etc.) 28849 6 Hand Primer Pump, Normal low 29578 L Hand Primer Plate. Normal low 29244 Hand Primer Pump, Reverse low 35474 M Cap plate, Top of M00 Header Assemblies 28853 6 N O-Ring for Header Top (quad cross-section) 28869 6 O Volume Plug Used under Cap Plate 29552 6-7 -
M00 Service Parts (continued) Component Reference Description Part No. Pkg. Qty. P Q Top Load Heater Kit - 2 volt, 00 Watt 334 Top Load Heater Kit - 2 volt, 50 Watt 32364 Top Load Heater Kit - 24 volt, 50 Watt 33649 Top Load Heating - 2 volt, 00 Watt 30446 Top Load Heating - 2 volt, 50 Watt 30447 R Pre-ilter Screen - 50 Micron 29575 R Pre-ilter Screen 50 Micron, Top Load 29244 Header Assembly, Normal low - Port Threads: /2-20 30837 Header Assembly, Normal low - Port Threads: /4-8 NPT 33260 S Header Assembly, Normal low - Port Threads: 3/8-8 NPT 33648 Header Assembly, Normal low - Port Threads: M2 x.5 34504 Header Assembly, Normal low - Port Threads: M4 x.5 34306 Header Assembly, Normal low - Quick Disconnect itting, RS 37284 Side Load Heater Kit - 2 volt, Threads: /4-8 NPT 32283 Side Load Heater Kit - 2 volt, Threads: 3/8-8 NPT 3560 Side Load Heater Kit - 2 volt, Threads: /2-20 30939 Side Load Heater Kit - 2 volt, Threads: M2 x.5 34743 Slide Load Heater Kit - 2 volt, Threads: M4x.5 38734 T Side Load Heater Kit (Deutsch lectrical Terminals) - 2 volt, Threads: /2-20 36550 Side Load Heater Kit - 24 volt, Threads: /4-8 NPT 3444 Side Load Heater Kit - 24 volt, Threads: 3/8-8 NPT 3445 Side Load Heater Kit - 24 volt, Threads: /2-20 3446 Side Load Heater Kit - 24 volt, Threads: M2 x.5 35334 Side Load Heater Kit - 24 volt, Threads: M6 x.5 4044 U lectronic Water in uel Sensor Kit - 24 volt 3365 U lectronic Water in uel Sensor Kit, Top Load - 2 volt 29996 Sensor, Water in uel - 2 volt 32343 V Sensor, Water in uel - 2 volt (does not include dashboard light hardware) 4282 Sensor, Water in uel - 24 volt 3942 W Sensor, Water in uel, Top Load - 2 volt 3083 X Mounting Screws, Water in uel Sensor 24322 4 Y Dust Seal under retaining nut, Large diameter 29577 6 Z Retaining Nut Large Diameter () 29458 6 Not Shown Lift Pump wiring harness 3406 I Water Sensor Drain Valve Kit, Plastic 32342 4 ilter Change Indicator (replaces air vent plug (B) when installed) 43387 LCTRIC LIT PUMP KITS Component Reference Description Replaces Kit Part Number (Lift Pump P/N) Pkg. Qty; 2V, 40 gph, 8 psi, Reverse low, Brush Customer P/N 87802238 (various New Holland filter assemblies) 34668 (34668) 5 2V, 40 gph, 7 psi, Reverse low, Brush 2V, 40 gph, 0 psi, Reverse low, Brushless Customer P/N 87327688 (various New Holland filter assemblies and the 39442 aftermarket filter assembly) Customer P/N 83707928 (various SISU Diesel filter assemblies) 37908 (37890) 40607 (4028) 2V, 80 gph, 0 psi, Reverse low, Brushless Lift Pump used on aftermarket M assemblies 33945, 4775, and 42963 43242 (4776) - 8 -
LCTRIC LIT PUMP KITS (continued) Component Reference Description Replaces Kit Part Number (Lift Pump P/N) Pkg. Qty; 2V, 40 gph, 8 psi, Reverse low, Brush Customer P/N R56287 (Various John Deere ilter assemblies) 44000 (3574) 2V, 60 gph, 7 psi, Reverse low, Brush Customer P/N R509033 (Various John Deere ilter assemblies) 4440 (35272) 2V, 60 gph, No Regulation, Normal low, Brush Customer P/N R509530 (Various John Deere ilter assemblies) 44002 (35277) 2V, 60 gph, No Regulation, Reverse low, Brush Customer P/N R508857 (Various John Deere ilter assemblies) 44003 (35373) 5 2V, 50 gph, 7 psi, Reverse low, Brush Used on JCB ilter Assemblies P/N: 332/D6723, 320/07065, 333/C335, 333/9834, 333/X0443, 333/G053, 320/07458, 320/07493 44666 (39456) 2V, 40 gph, 0 psi, Reverse low, Brush Used on JCB ilter Assemblies P/N: 320/07206, 320/07207/ 320/07457 44667 (39830) 2V, 50 gph, 0 psi, Reverse low, Brush Used on JCB ilter Assemblies P/N: 320/07294, 320/07350, 320/07456, 320/07495 44668 (420) 24V, 50 gph, 7 psi, Reverse low, Brush Used on JCB ilter Assemblies P/N: 320/07400 44664 (42387) 24V, 50 gph, 7 psi, Reverse low, Brush Used on JCB ilter Assemblies P/N: 320/07484 44669 (44432) M00 MARIN Specific Components Component Reference Description Part No. Pkg. Qty. U2 lectronic Water in uel Sensor Kit - 2 volt (Aluminum drain valve assembly) 30866 L Marine Hand Primer Pump Kit, Normal low (nhanced corrosion resistant coating) 3084 I 2 Standard Marine Drain Valve Kit, aluminum 483 I 3 Water Sensor Drain Valve Kit, aluminum 484 Additional Information:. Side Load Heaters are 00 watt with Packard terminal connectors unless otherwise noted. 2. All lectric uel Heaters have automatic switching. Heater comes ON at 42-58 (5.5-4.4 C) and goes O at 75-85 (23.9-29.4 C). 3. Wire harness assemblies are made with 8 gauge jacketed copper wire and come complete with mating terminal connector with connecting wire leads. - 9 -
M000 ngine power rating: 250 (87 kw) to 600 HP (447 kw) Max. fuel flow rate: 80 US gallons/hour (680 liters/hour) Max. operating pressure: 00 P.S.I. (688 kpa) without collection bowl Heavy duty aluminum header assemblies available with a variety of internal threads sizes and sealing configurations. Accepts optional modular features. s available in different sizes and micron ratings. M000 ilter/separator Systems System Part No. Use Micron Rating low Port Size Components Part No. Pkg. Length Dim. A 2 Dim B 2 Qty. 33688 Pre- 30 N /2-4 NPT Air Vent plug 33634 4.0 (0.6) 9.2 (233.7) 7.0 (78.6) 33692 Pre- 30 N /2-4 NPT Air Vent plug 33638 8.0 (203.2) 3.2 (335.3).0 (280.2) 33696 Pre- 30 N 7/8-4 Air Vent plug 33634 4.0 (0.6) 9.2 (233.7) 7.0 (78.6) 33700 Pre- 30 N 7/8-4 Air Vent plug 33638 8.0 (203.2) 3.2 (335.2).0 (280.2) 42925 Pre- 30 N M22 x.5 Collection Bowl, Air Vent Plug 33638 8.0 (203.2) 3.2 (335.2).0 (280.2) 36224 Pre- 50 N M22 x.5 Water in uel Sensor (24v), Hand Primer, Air Vent Plug 36223 8.0 (203.2) 3.3 (339.).3 (286.0) 33686 inal 5 N /2-4 NPT Air Vent Plug 339 4.0 (0.6) 9.2 (233.7) 7.0 (78.6) 33690 inal 5 N /2-4 NPT Air Vent Plug 33636 8.0 (203.2) 3.2 (335.2).0 (280.2) 33694 inal 5 N 7/8-4 Air Vent Plug 339 4.0 (0.6) 9.2 (233.7) 7.0 (78.6) 33698 inal 5 N 7/8-4 Air Vent Plug 33636 8.0 (203.2) 3.2 (335.2).0 (280.2) 37776 inal 5 N 7/8-4 300 Watt (2v) Top Heater, Collection Bowl, Air Vent Plug 33636 8.0 (203.2) 5.6 (396.3) 3.4 (34.) 42939 inal 5 N M22 x.5 Collection Bowl, Air Vent Plug 33636 8.0 (203.2) 3.2 (335.2).0 (280.2) 4060 inal 5 N 7/8-4 Collection Bowl, TL Heater, WI Sensor, 33636 8.0 (203.2) 5.7 (397.8) 3.5 (342.7) M000 Service Replacement s Part No. Use Micron Rating low Direction Length Pkg. Qty. 36223 Pre-ilter 50 Normal 8.0 (203.2) 6 33634 Pre-ilter 30 Normal 4.0 (0.6) 6 33638 Pre-ilter 30 Normal 8.0 (203.2) 6 43628 Pre-ilter 30 Reverse 4.0 (0.6) 6 37968 Pre-ilter 0 Reverse 8.0 (203.2) 6 339 inal ilter 5 Normal 4.0 (0.6) 6 33636 inal ilter 5 Normal 8.0 (203.2) 6 39595 inal ilter 5 Reverse 3.0 (76.2) 8 40625 inal ilter 5 Reverse 8.0 (203.2) 6 Reference Glossary of Terms on page (N = Normal, R= Reverse). 2 Reference M000 Dimensions on page 3. - 0 -
M000 Components J L M N M D K B C Q O S G H P R T Water Collection Bowl Seals A D I I Not available separately M000 Service Parts Component Reference Description Part No. Pkg. Qty. A Complete Water Collection Bowl Assembly 35635 B Plastic Plug, Air Vent 2869 6 C O-Ring for Air Vent Plug 3494 0 D O-ring, Water Collection Bowl Header to 059 0 Sealing Washer - Three Lobe Seal for Plastic Drain Valves 3200 5 O-ring, Plastic Drain Valve 2920 5 G O-ring, Bowl Header to Bowl (Only available in M000 Seal Kit: P/N 36768) H O-ring, Draw Bolt to Bowl 32884 5 I Standard Drain Valve Kit, Plastic 32003 I Water Sensor Drain Valve Kit, Plastic 32342 J Retaining Ring, Small Diameter (Top Cap/Volume Plug) 28694 K Hand Primer Module Assembly, Normal low 3690 Hand Primer Module Assembly, Reverse low 37348 L Top Cap/Volume Plug (Only available with a Complete M000 System) M O-ring under Top Cap/Volume Plug and Top Load Heater Assembly 29588 N Heater Kit, Top Load (2V, 300 Watt) 36238 O Heater Kit, Side Load (2V, 200 Watt) (Heater Thread: /2-20, includes adapter to M6x.5) 4045 P Dust Seal 3304 Q Header Assembly, Black coated (Ports Thread Size: /2-4 NPT) 33564 Header Assembly, Black coated (Ports Thread Size: 7/8-4) 3302 Header Assembly, M000a (Hose Barb with Water Sensor) 45477 R Retaining Ring, Large Diameter () 3308 S Mounting Screws, Water in uel Sensor 24322 4 T lectronic Water in uel Sensor Kit, 2 Volt 29268 lectronic Water in uel Sensor Kit, 24 Volt 38023 Not Shown M000 Seal Kit, includes: C,,, G, H, I, N, R, V, W 36768 V Hand Primer Pump, Outer Seal (Only available in M000 Seal Kit: P/N 36768) Not Shown W Hand Primer Pump, Inner Seal - Not Shown 2259 0 NOT: All lectric uel Heaters have automatic switching. Heater comes ON at 42-58 (5.5-4.4 C) and goes O at 75-85 (23.9-29.4 C). - -
Basic uel Manager System Dimensions NOT: Theses are typical dimensions. M 2.3 (54.) Ø.332 (Ø 8.4) Air Vent Plug 3.69 (93.7) Dimension A Removal.55 (3.9) ittings Ø.32 O.D. (Ø 8 O.D.) Dimension B Installed Collection Bowl Assembly Ø 3.63 Ø (92.) Ø 6.0 Ø (52.4) Ø 3.8 Ø (80.8) M0.22 (30.9) Air Vent 3.32 (84.2) ittings Ø.35 O.D. (Ø 8.8 O.D.) 2.25 (57.) Dimension A Removal.35 (8.8) Dimension B Installed Ø3.2 (Ø 79.2).97 (50.0) Ø 3.73 (Ø 94.7) Collection Bowl Assembly M00 3.95 (00.5) 2.50 (63.5) Air Vent 4.2 (04.6) 2.77 (70.4).47 (37.3) lectric Lift Pump 2.57 (65.3) Dimension A Removal.425 (0.8) Ports Dimension B Installed Dimension B Subtract.0 (25.4) or Drain Valve Ø 3.73 (Ø 94.7) Collection Bowl Assembly.97 (50.0) - 2 -
Basic uel Manager System Dimensions M 000 7.34 (86.4) 6.00 (52.4) 3.78 (96.0) 4.3 (04.9) 3.30 (83.8) 2.33 (59.2) Air vent 2.70 (68.6) 0.53 (3.4) Dimension A Removal Dimension B Installed Ø 0.3* (Ø 7.9).28 (32.5) 2.70* (68.6) 0.86* (2.8) Ø 4.23 (Ø 07.4) 5.59 (49.0) Collection Bowl Assembly * Drain Valve dimension vary with type, these are average dimensions. Applicable for M, M0 and M00 also. M00 Top Load Normal low Header Connection Reverse low Header Connection Inlet Outlet 4.88 (23.9) Ø 3.78 Ø(96.0) Drain Vent 7.66 (94.6) low Direction Arrow low Direction Arrow 7.93 (20.4) low direction arrows are cast in header flange below the ports. Ports 2 & 3 Inlet Ports & 4 Outlet low direction arrows are stamped in front of header inlet ports. Ports & 4 Inlet Ports 2 & 3 Outlet Water Sensor Heater Heater (Side Load) typically goes in the Inlet port that is unused. Heater (Side Load) typically goes in the Inlet port that is unused. - 3 -
CLARCOR ngine Mobile Group 4400 ast Highway 30 Kearney, N 68847 U.S.A. www.clarcorems.com 99920 Rev. August 205