DE SERVICE STATIONS AUTOMATIC DE STATIONS PORTABLE DE GUNS DE WICKS DE SUCKERS SVS-8AS/8AS/AS TP-28AS /2AS TP-AS/ CP/CPN series GS series SURFACE-MOUNT / SMT DES HEATED TOOLS 7 7
DE SERVICE STATIONS Omnifunctional machine for soldering, desoldering and reworking. SERVICE STATION SVS-8AS ANTI LEAD STATIC FREE INDEPENDENT PUMPS Desoldering and reworking operate simultaneously 4% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs (soldering & desoldering) SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy DES REWORK UNIT The temperature can be set to max C. UNIT Good for a wide range of soldering work with 7 W heater. DE UNIT Instant desoldering with open-valve mechanism. (Please refer to the next page.) INDIVIDUAL POWER SWITCHES Along with the main power switch, there are switches for soldering, desoldering, and reworking. Nozzles sold separately. HEATED TOOLS ST-76 soldering iron stand (included) 72
PRODUCT / FUNCTIONS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Soldering Unit ( ) Tip temp. 4 3 2 DE UNIT UNIT REWORK UNIT Pull trigger fully Work (Set at 4 C) The open-valve allows the device to reach vacuum pressure of -.6MP (approx.-4 mmhg) in only.second. (about 4 times faster than our SVS- AS). 2 3 Open-valve mechanism 4 (mmhg) -76-38 chamber Desoldering Unit ( ) Nozzle temp. 4 3 2 Trigger First stage switch Negative pressure Work (Set at 4 C) 2 4 6 8 Vaccum Degree Chart SVS-8AS SVS-8AS SVS-AS Pump TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-N- nozzle) pressure compared with other goot models..2.3.4..6.7(sec.) SUCTION CAPACITY COMPARISON The arrow indicates solder residue. SVS-AS MODEL SVS-8AS Voltage 22-24 V AC / 6 Hz Power Consumption 67-76 W Power. m Inlet type Temp. Desoldering Unit 2 4 C Setting Soldering Unit 2 48 C Range Rework - Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Air Flow -2L /min Accessories Cleaning pin TP-CP-3 / Soldering iron stand ST-76 Total Weight 9.3 kg CONTROL BOX Output Voltage 22-24 V AC 4 (W) 24 (H) 23 (D) mm Weight 8.4 kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption 22-24 V AC / 8 W Ceramaic 22 x mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N-S UNIT Input Voltage/Power Consumption 22-24 V AC / 7 W Ground Resistance Less than 2 Ω Leak Voltage Under 2 mv Ceramic heater Length 9 mm (with PX-2RT-B w/o cord bushing) Weight 7 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B REWORK UNIT SVS-8AS Input Voltage/Power Consumption 22-24 V AC / 37-43 W Nichrome Hose length between Handpiece and Control Unit m Length 22 mm (w/o cord) Weight 8 g (w/o nozzle, cord) This machine does not have vacuum pickup function. For replacement tips, nozzles, and optional parts, refer to p.64 & p. 79 DES HEATED TOOLS 73
DE SERVICE STATIONS Desoldering in an instant, with reduced solder residue! Combines desoldering gun and temperature-controlled soldering iron in one unit. SERVICE STATION SVS-8AS ANTI LEAD STATIC FREE 4% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SUCTION CAPACITY COMPARISON The arrow indicates solder residue. SVS-AS SVS-8AS DES HEATED TOOLS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder 4 3 2 Pull trigger fully Soldering Unit ( ) Tip temp. Work (Set at 4 C) 2 3 Open-valve mechanism 4 (mmhg) -76-38 Negative pressure chamber 4 3 2 Trigger First stage switch Desoldering Unit ( ) Nozzle temp. Pump TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Work (Set at 4 C) 2 4 6 8 Vaccum Degree Chart Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-N- nozzle) The open-valve allows the device to reach vacuum pressure of -.6MP (approx.-4 mmhg) in only.second. (about 4 times faster than our SVS- AS). pressure compared with other goot models SVS-8AS SVS-AS..2.3.4..6.7(sec.) CONTROL BOX Output Voltage V, V, 22-24 V AC 2 (W) x 7 (H) x 6 (D) mm Weight 3.6 kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption V, V, 22-24 V AC 8 W Ceramaic 22 x mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N-S UNIT SVS-8AS MODEL Voltage V, V, 22-24 V AC / 6 Hz Power Consumption 2 W ( V, V) 27-3 W (22-24 V) Power. m Temperature Desoldering Unit 2 4 C Setting Range Soldering Unit 2 48 C Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mm Hg) Accessories Cleaning pin TP-CP-3 Soldering iron stand ST-76 Total Weight 4. kg (w/o cord ) Input Voltage/Power Consumption V, V, 22-24 V AC 7 W Ground Resistance Less than 2 Ω Leak Voltage Under 2mV Ceramic heater Length 9 mm (with PX-2RT-B w/o cord bushing ) Weight 7 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) 74
Combines desoldering gun and temperature-controlled soldering iron in one unit. SERVICE STATION SVS-AS ANTI STATIC POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy UNIT lstable temperature with excellent heat speed & heat recovery. lgood for a wide range of soldering work, for terminals, connectors, and flat ICs. DE UNIT lbuilt-in powerful and compact twin pump. lwhen trigger is pulled, the heater heats up forcibly, reducing temperature decrease. lafter trigger release, the pump operates for approx.. seconds more, reducing solder clogs. TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Soldering Unit ( ) Tip temp. 4 3 2 Work (Set at 4 C) 2 3 4 Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-N- nozzle) Desoldering Unit ( ) Nozzle temp. (mmhg) 4 3 2 2 4 6 8 Vaccum Degree Chart 6 4 3 2 Work (Set at 4 C)..2.3.4. (sec.) MODEL SVS-AS Voltage V, -3 V, 22-24 V AC / 6 Hz Power Consumption 2 W ( V,-3 V) 27-3 W (22-24 V) Power. m Temperature Iron Unit 2 4 C Setting Range Desoldering Unit 2 48 C Insulation Resistance Over MΩ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Accessories Cleaning pin TP-CP-7 Soldering iron stand ST-76 Total Weight 4.kg CONTROL BOX Output Voltage V, -3 V, 22-24 V AC 2 (W) x 7 (H) x 6 (D) mm Weight 3.6kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption -3 V, 22-24 V AC / 8 W Ceramic 22 x mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N- UNIT Input Voltage/Power Consumption -3 V, 22-24 V AC / 7 W Ground Resistance Less than 2 Ω Leak Voltage Under 2mV Ceramic heater Length 9 mm (with PX-2RT-B w/o cord bushing) Weight 7 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) DES HEATED TOOLS 7
DE AUTOMATIC DE New open-valve mechanism achieves unrivalled vacuum power and start-up speed. TP-28AS ANTI LEAD STATIC FREE 4% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SUCTION CAPACITY COMPARISON The arrow indicates solder residue. TP-2AS TP-28AS DES HEATED TOOLS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Pull trigger fully Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with TP-N- nozzle) Open-valve mechanism Negative pressure chamber 4 3 2 Trigger First stage switch Desoldering Unit ( ) Nozzle temp. Pump NOZZLE TEMPERATURE-RECOVERY FEATURES The open-valve allows the device to reach vacuum pressure of -.6MP (approx.-4 mmhg) in only.second. (about 4 times faster than our TP-2AS). (mmhg) -76-38 Work (Set at 4 C) 2 4 6 8 Vaccum Degree Chart pressure compared with other goot models SVS-8AS TP-28AS SVS-AS TP-2AS..2.3.4..6.7(sec.) MODEL TP-28AS Voltage V, V, 22 24 V AC / 6 Hz Power Consumption 3 W ( V, V) 7-2 W (22-24 V) Power. m Temperature Setting Range 2 4 C Insulation Resistance Over MΩ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Accessories Cleaning pin TP-CP-3 Soldering iron stand ST-76 Total Weight Approx. 2.9 kg (w/o cord, hose ) CONTROL BOX Output Voltage V, V, 22 24 V AC 9 (W) x 2 (H) x 26 (D) mm Weight 2.6kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption - V, 22 24 V AC / 8 W Ceramic 22 mm Weight 2 g (w/o hose ) Standard Nozzle TP-N-S For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) 76
Perfect for desoldering through-hole and multi-layered PCBs. TP-2AS POWERFUL VACUUM l Built-in powerful and compact twin pump. lwhen trigger is pulled, the heater heats up forcibly, reducing temperature decrease. lafter trigger release, the pump operates for approx.. seconds more, reducing solder clogs. Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with TP-N- nozzle) Desoldering Unit ( ) Nozzle temp. 2 4 6 8 ) Vaccum Degree Chart 6 4 3 2 (mmhg) 4 3 2 Work (Set at 4 C) ANTI STATIC NOZZLE TEMPERATURE-RECOVERY FEATURES..2.3.4. (sec.) MODEL TP-2AS Voltage V,-3 V, 22 24 V AC / 6 Hz Power Consumption 3 W ( V,-3 V) 7-2 W (22-24 V) Power. m Temperature Setting Range 2 4 C Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Accessories Cleaning pin TP-CP-7 Soldering iron stand ST-76 Weight Approx. 2.9 kg (w/o cord, hose ) CONTROL BOX Output Voltage V,-3 V, 22 24 V AC 9 (W) x 2 (H) x 26 (D) mm Weight 2.6kg (w/o cord, hose ) DE UNIT POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy Input Voltage/Power Consumption -3 V, 22 24 V AC / 8 W Ceramic 22 mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N- For replacement tips, nozzles, and optional parts, refer to p. 79 DES ST-76 soldering iron stand (included) HEATED TOOLS 77
DE PORTABLE DE GUNS Handy, portable Desoldering Gun with combined temperature-control circuit and desoldering mechanism PORTABLE DE GUNS TP-/ AS POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy ANTI STATIC TP-AS TP-/AS FEATURES Easy to Use Compact design with an internal motor, pump, and temperature-control circuit built into the grip. Portable and efficient. DES Powerful Maximum vacuum of.8mpa (-6 mmhg). Removes through-hole solder easily. Variable Temperature Setting Sensor feedback system allows temperature setting from 2-4 C. Replaceable Cartridge Filter Makes changing the filter easy. Carry case included. Can be set from 2-4 C. Anti-static Model TP-AS HEATED TOOLS MODEL TP- TP-AS Voltage 3 V, 22 24 V AC / 6 Hz Power Consumption 8 W (-3 V), 7 7 W (22-24 V) Power. m Temperature Setting Range 2 4 C Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Ceramic Standard Nozzle TP-N- Cleaning pin TP-CP-7/ Filter TP-F Accessories Carry case Heat resistant pipe /Stand 22 7 mm Weight 47 g (w/o cord) Carry case with heat resistant pipe that allows the gun to be stored immediately after use. Also includes stand to rest the gun. For replacement tips, nozzles, and optional parts, refer to p. 79 78
SVS-8AS/8AS/AS PX-2RT-B. 4 4 R.3 R PX-2RT-2BC PX-2RT-3BC. PX-2RT-4C 4 PX-2RT-C *TP-28GAS Desoldering Unit is not interchangeable with TP-2GAS (SVS-, SVS-AS, SVS-AS) 4 6 REPLACEMENT PARTS FOR TP-28AS/2AS 3 4.. 4 3. 2.4. PX-2RT-K 2 PX-2RT-8S REPLACEMENT PARTS FOR TP-/AS 3 TP-H 4 6 3. Filter 37 7 4 8 3 PX-2RT-B PX-2RT-2CR Cleaning Pin Vice. 3 PX-2RT-CR 4 6 4 Round solder-plated type 7 6 REPLACEMENT NOZZLES SVS-8AS/8AS/AS/TP-28AS/TP-2AS/TP-(AS) 2 Felt B 2 Steel Wool 8 TP-N- 8. 2.. 8. 2.. 2 TP-N-*2 Felt Set TP-FT Felt A (3pcs) Felt B Steel Wool (3pcs) Felt A Cartridge Set TP-K S 2 4 S 2 TP-N-S* 6.4 2.. 2 4 6.4 2.2. 2 TP-N-S Cleaning Pin Vice Cartridge Steel Wool Felt A Felt B (pcs) TP-PV 2 77. 2 4 77. 8. 2 4 Cleaning Pin Overall View (Standard) 6.4 S8 6.4.6.8 TP-N-S8 Iron Unit SVS-8AS, SVS-8AS, SVS-AS Collar Overall View (Slim) Barrel Tip Spacer HEATED TOOLS 9. 4. 2. TP-N-2 8. 2..8 TP-N-8 Filter Set TP-F ø.7 mm (for ø.8 &. mm nozzle) TP-CP-7 ø.3 mm (for ø. & 2. mm nozzle) TP-CP-3 DES TP-PV Drill Bit ø.7 mm TP-DB-7 Drill Bit ø.9 mm TP-DB-9 Drill Bit ø.4 mm TP-DB-4 Drill Bit ø2.4 mm TP-DB-24. 4 Cleaning Pin Pin vice body (The drill bit is not included.) Standard type PX-2RT-4CR Steel Wool Only (3pcs) TP-UL Felt B (pcs) TP-RFT 2. 4 3. 3 4 PX-2RT-3CR Filter Set (3pcs) TP-F Cartridge Set TP-K Felt Set (3pcs) TP-FT ROUND SOLDER-PLATED TIP 4 Barrel TP-HP COMMON PARTS PX-2RT-6E Overall View.2 Desoldering Unit for TP-2AS TP-2GAS Barrel TP-HP *TP-28GAS Desoldering Unit is not interchangeable with TP-2GAS (TP-2, TP-2AS, TP-2AS).. PX-2RT-D 4.2 9 4. PX-2RT-4D 3.2 3.3 *Desoldering Unit for TP-28AS TP-28GAS TP-H PX-2RT-3.2D...6. 2.2 PX-2RT-2.4D. PX-2RT-.6D. 4 3 PX-2RT-3C PX-2RT-2C 2. 6 4 3 8 3.2 2.2 6 4 3 8 4 Iron Unit (common for SVS series) SVS-GAS for Soldering Iron SVS-H- Barrel for Soldering Iron TQ-77HP(S) Spacer for Soldering Iron TQ-77SS Collar for Soldering Iron TQ-77NUT *Desoldering Unit for SVS-8AS/SVS-8AS TP-28GAS Desoldering Unit for SVS-AS TP-2GAS for Desoldering Gun TP-H Barrel for Desoldering Gun TP-HP 4 REPLACEMENT PARTS FOR SVS-8AS/8AS/AS PX-2RT-BC. 2.. 3 4. PX-2RT-SB REPLACEMENT PARTS / OPTIONS REPLACEMENT TIPS *Model SVS-8AS, SVS-8AS, TP-28AS Standard Nozzle : TP-N-S *2Model SVS-AS, TP-2AS, TP-(AS) Standard Nozzle : TP-N- 79
DE DE WICKS RMA base flux. DE WICKS CP/CPN series MSDS CONVENTIONAL DISPENSER PACK lhigh-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. lcan be used for precision PCBs safely. DISPENSER PACK WITH STAINLESS STEEL MOUTH lcan be used for precision PCBs safely. lergonomic design will keep your fingers cool. DES MODEL Type Width Length CP- Plain Knitting Approx.. mm CP-2 Plain Knitting Approx. 2. mm CP-2 Plain Knitting Approx. 2. mm Approx.. m CP-3 Plain Knitting Approx. 3. mm CP-3 Plain Knitting Approx. 3. mm ECONOMICAL PACKS OF PCS lwith convenient zipper bag. lcontains silica gel to reduce quality degradation. MODEL Type Width Length CP-Y Plain Knitting Approx.. mm CP-2Y Plain Knitting Approx. 2. mm CP-2Y Plain Knitting Approx. 2. mm Approx. 2m CP-3Y Plain Knitting Approx. 3. mm CP-3Y Plain Knitting Approx. 3. mm BULK-LENGTH SPOOL lbargain extra-long wicks with spool. lmakes it easy to take anywhere. HEATED TOOLS MODEL Type Width Length CP-- Plain Knitting Approx.. mm CP-2- Plain Knitting Approx. 2. mm CP-2- Plain Knitting Approx. 2. mm Approx.. m CP-3- Plain Knitting Approx. 3. mm CP-3- Plain Knitting Approx. 3. mm MODEL Type Width Length CP-B Plain Knitting Approx.. mm Approx. 3m CP-2B Plain Knitting Approx. 2. mm Approx. 3m CP-2B Plain Knitting Approx. 2. mm Approx. 2m CP-3B Plain Knitting Approx. 3. mm Approx. 2m CP-3B Plain Knitting Approx. 3. mm Approx. m 8
HALOGEN-FREE DE WICKS CPN SERIES MSDS ANTI STATIC l Available in packs of only. l Does not intentionally contain halogens. l RMA non-wash flux is used. (J-STD-4: ROLO) l Plain-knitting wick recommended for lead-free applications with high heat conduction. l Anti-static case. l Contains silica gel to reduce quality degradation. l With convenient zipper bag. MODEL Type Width Length Quantity CPN-2- Plain Knitting Approx. 2. mm Approx.. m pcs/ Pack CPN-3- Plain Knitting Approx. 3. mm HALOGEN-FREE Less than, ppm each of chlorine, bromine, fluorine and iodine content (JEITA Standards) Rosin HALOGEN-FREE RMA flux Length. mm 2. mm for Width 2. mm 3. mm for 3. mm Quantity. m CPN-2- CPN-3- CP- CP-- CP-2 CP-2- CP-2. m CP-2- CP-3 CP-3- CP-3 CP-3- CP-Y CP-2Y 2.m CP-2Y CP-3Y CP-3Y 3m m CP-3B 2m CP-2B CP-3B 3m CP-B CP-2B DES HEATED TOOLS 8
DE DE SUCKERS Manual pumps suck up solder. Plunger pumps are light, strong, and economical. DE SUCKERS GS series When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up. GS- Priming plunger cuum To prevent solder clogs JUMBO SIZE Large vacuum capacity PLUNGER LOCK FUNCTION Portable, compact storage PLUNGER LOCK FUNCTION The plunger can be stored inside the shaft by pushing it in completely, and pressing the vacuum release button. Compact storage. release button Priming plunger Shaft GS-4 GS-8 To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage ANTI-STATIC MATERIAL On the nozzle To prevent solder clogs ANTI-STATIC MATERIAL On the nozzle DES GS-8 GS-4 To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage MODEL GS- GS-4 GS-8 Color ivoly Length 33 mm 27 mm 9 mm When Stored 24 mm 2 mm Weight 89 g 6 g 2 g Diameter ø23 mm ø9 mm ø4 mm Applicable Nozzle GS-N GS-8N MODEL GS- GS-4 GS-8 Color Black Length 33 mm 27 mm 9 mm When Stored 24 mm 2 mm Weight 89 g 6 g 2 g Diameter ø23 mm ø9 mm ø4 mm Applicable Nozzle GS-N GS-8N To prevent solder clogseasy HEATED TOOLS GS- To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage JUMBO SIZE Large vacuum capacity 3.2 2.6 REPLACEMENT NOZZLES GS-N GS-8N GS-N 3..4 3. GS-8N.4 2.6 3.2 ANTI-STATIC MATERIAL On the nozzle 82