EVT4 Series LED & Fluorescent Technology
HOLOPHANE EVT4 Series THE EVT4 SERIES SLEEK, IMPACT-RESISTANT HOUSING IS IDEAL FOR A WIDE-RANGE OF INDUSTRIAL APPLICATIONS. AVAILABLE IN FLUORESCENT AND LED TECHNOLOGY, THE EVT4 IS ENERGY-EFFICIENT AND AVAILABLE WITH MANY CONTROLS OPTIONS. IT IS IP65 RATED AND SUITABLE FOR WET LOCATIONS. To meet these 21st century needs, it is imperative that the LED system is properly engineered for thermal and performance considerations. Holophane has exhausted many hours of research and development to ensure reliability through innovative integration of this exciting technology. 2 HOLOPHANE LED & Fluorescent EVT4 Series
Indoor Lighting EVT4 LED and EVT4 Fluorescent Features and Benefits O Energy efficient LED or fluorescent technology O Multiple mounting options O Controls enabled O Vandal-resistant polycarbonate construction O Wet location listed when mounted to or suspended from ceiling O Damp location listed when mounted to wall Typical Applications O Cold Storage Facilities (LED) O Parking Garages O Industrial Spaces O Transit Stations O Stairwells O Canopies O Locker Rooms O Hospitals HOLOPHANE LED & Fluorescent EVT4 Series 3
HOLOPHANE Easy Installation The EVT4 fixture was designed with the contractor in mind. With its multiple mounting options, this fixture provides easy installation in both relight and new construction applications. Whether the application requires mounting to an existing junction box, to the surface, or by chain or conduit, we have a solution for you. Captive-latch design and smooth exterior allow for easy access and maintenance. Quick Mount Junction Box Surface Mount (Standard Mounting Bracket) Conduit Entry Chain Mount Tilt for Ramp Applications LOCK NUT O-RING FITTING 4 HOLOPHANE LED & Fluorescent EVT4 Series
Indoor Lighting Relighting & Revitalizing Using EVT4 fixtures for relight opportunities can dramatically revitalize the look of a space. Other benefits include enhanced lighting quality and distribution, as well as reduced energy and maintenance costs. In fact, energy consumption can be reduced by as much as 30-50% leading to a payback of less than two years depending on original lamp source replaced. Ideal spaces for relighting include areas with long burn hours or where the current fixtures use older-style lamps and ballasts. The EVT4 fixture offers several control solutions for maximizing energy efficiency without sacrificing light quality. EVT4 is simply the smart lighting choice for sustainability, energy savings and reducing costs. California Title 24 compliant. Traditionally, parking garages are illuminated 100% of the time but are only occupied 20% of the time. By specifying additional options such as a photo cell or occupancy sensor, you will save energy and extend the life of the fixture. PHOTO SENSOR OCCUPANCY SENSOR Energy-saving solution for daylight harvesting Wet location listed Mounted on end of fixture for optimal performance Cold weather, wet location listed and IP65 rated Available with 360 lenses for mounting heights up to 8 and 20 15-minute time delay after last motion is detected Note: EVT4 LED also available with: 0-10V Dimming, 100-50% power control, Bi-Level Control, ROAM wireless monitoring system Rugged Construction The injection-molded, vandal-resistant housing of the EVT4 fixture is UV-stabilized frosted polycarbonate with a continuous poured-in-place, closed-cell gasket. Similarly, the injection-molded lens is UV-stabilized and impact-resistant. The lens, featuring a decorative rib detail, and the tamper-resistant latches are made of a clear, transparent polycarbonate material. The channel and channel cover are constructed from 20-gauge steel. The fixture design allows for 10-12% uplight to minimize the cavern effect while featuring tool-less ballast and wiring access for ease of maintenance. Holophane Lighting offers the following warranty for rough-service fixtures: Rough-service products by Holophane Lighting are engineered to with stand extreme physical assault. When properly installed per instructions for maximum vandal resistance, any rough-service lighting fixture utilizing a polycarbonate lens and/or polycarbonate housing enclosure that is rendered inoperable as a result of physical abuse, will be repaired or replaced without charge for the life of the product. HOLOPHANE LED & Fluorescent EVT4 Series 5
HOLOPHANE EVT4 LED Injection-molded, vandal resistant housing Impact-resistant polycarbonate lens Utilizes high-efficiency LEDs Optical Control Films Direct Light: general lighting environments Asymmetric (ASYM) Provides broad light distribution which is ideal for lower mounting heights Symmetric (SYM) Well suited for general lighting environments 6 HOLOPHANE LED & Fluorescent EVT4 Series
Indoor Lighting EVT4 Fluorescent Precision-formed, high-performance segmented optics Injection-molded, vandal resistant housing Prismatic Light Control Film Tool-less ballast and wiring access Lighting Control Options: customize light & reduce glare Prismatic light control film Striped light control film Opaque light control film Houseside shield eliminates light trespass EVT4 with houseside shield option EVT4 with uplight shield option EVT4 without houseside shield or uplight shield options HOLOPHANE LED & Fluorescent EVT4 Series 7
HOLOPHANE Ordering Information Dimensional Details 10.5 mm (4-1/8 ) 10.5 mm (4-1/8 ) 21 mm (8-1/4 ) 139.1 mm (54-3/4 ) EVT4 LED Maximum Weight: 5.9 kg. (13.5 lbs.) Performance Specifications EVT4 LED Intended Use Ideal for use in applications where smart, energy-efficient fixtures are desired. Typical applications include parking garage, canopy, transportation, school, hospital, cold storage and exterior retail environments where moisture or dust is a concern. Polycarbonate enclosure protects fixture while remaining easy to service and clean. Construction UV-stabilized, injection-molded, impact-resistant, frosted polycarbonate housing with continuous poured-in-place, closed-cell gasket. 20-gauge steel channel and channel cover. Aluminum sheet metal board plate for thermal conduction and support. Fixture design allows for uplight. Optics UV-stabilized, injection-molded, impact-resistant, clear transparent, polycarbonate lens with aesthetic rib detail (.080 thick). Asymmetric (ASY) optical control film provides broad light distribution (ideal for lower mounting heights). Symmetric (SYM) optical control film is well suited for general lighting environments. Clear transparent, tamper-resistant, polycarbonate latches standard (8 Torx T-20 tamper-resistant screws included). Stainless steel latches also available. Electrical Utilizes high-efficiency LEDs mounted to core circuit boards. 4100 Kelvin temperature standard, with additional color temperatures also available. High efficiency driver operates 100V through 277V, 50-60HZ. Integral surge protection standard and tested in accordance with IEEE/ANSI C62.41.2 to Category C Low. Includes a temperature-sensing component that will limit the temperature of the LEDs in case of excessive ambient temperatures or mis-application. One driver used for 39W and 59W; two drivers used for 79W and 114W. Bi-level control and low (0-10) voltage dimming standard (see options for prewiring). L93 at 60,000 hours (350mA) and L85 at 60,000 hours (525mA). Installation Stainless steel surface spring-mounting brackets standard (2 included) allows for ceiling or suspended mount. A variety of stainless steel mounting options also available: J-box mounting and mounting brackets for suspension with aircraft cable (cable not included). Optional stainless steel V-hooks available for chain hanging (chain not included). Surface conduit entry on each end and on top. For horizontal and vertical mounting on a wall, application must be under a covered ceiling and QMB option recommended. 1/2-3/4 KO. Listings CSA Certified to UL and C-UL standards for ambient temperatures ranging from -20 C to 40 C. NOM Certified (see Options). EVT4 LED is wet location listed for covered ceiling applications. Product will be rated for damp location only when wall mounted. IP65 rated. Meets Designlights Consortium requirements for Fuel Pump Canopy (standard). Meets Designlights Consortium requirements for Parking Garage Luminaires (see Options). Warranty 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx Rough Service products by Holophane Lighting are engineered to withstand extreme physical assault. When properly installed per instructions for maximum vandal resistance, any rough service polycarbonate lens and/or polycarbonate housing enclosure that is rendered inoperable as a result of physical abuse, will be repaired or replaced without charge for the life of the product. LED SPECIFICATION MATRIX System Watts Delivered Lumens (Nominal) Ambient Temperature C 39 3000 40 59 4100 40 79 6000 40 114 8000 25 See LED Specification Matrix below for ambient temperature listings. 8 HOLOPHANE LED & Fluorescent EVT4 Series
Indoor Lighting Preferred Selections: Most Frequently Ordered Catalog Numbers EVT4 1 LUMINAIRE EVT4 39LED 2 WATTAGE 39LED 59LED 79LED 114LED 27 3 COLOR TEMP. 27 35 57 AMB ASY 4 LIGHT CONTROL FILM ASY SYM 277 5 VOLTAGE MVOLT 120 277 347 480 SF 6 OPTIONS SF WLF WLFIN WLFEND Catalog Numbers for Entire Product Offering (Pricing and lead times may be affected) STEP 1: LUMINAIRE EVT4 EVT4 LED STEP 2: WATTAGE 39LED 39 watts 59LED 59 watts 79LED 79 watts 114LED 114 watts STEP 3: COLOR TEMPERATURE 1 4100K (CRI 65) 27 2700K (CRI 80) 35 3500K (CRI 80) 57 5700K (CRI 70) AMB Amber LED s STEP 4: LIGHT CONTROL FILM ASY Asymmetric beam SYM Symmetric beam STEP 5: VOLTAGE MVOLT 120 120V 277 277V 347 2 347V 480 2 480V STEP 6: OPTIONS 3 SF 4 Single fuse BSL722 4 Bodine emergency LED battery pack for 0 C and up BSL722C 4 Bodine emergency LED battery pack for -20 C and up WLF 5 Wet location fitting (two outboard, top) WLFIN 5 Wet location fitting (two inboard, top) WLFEND 5 Wet location fitting (one end) WLFEND2 5,6 Wet location fitting (both ends) CS89 6' white cord, 16/3, no plug, wet location CS88 6 Brad Harrison, 16/3 cord and straight blade plug set CS8812 12 Brad Harrison, 16/3 cord and straight blade plug set STSL Stainless steel tamper resistant latches QMB Quick-mount ceiling bracket CMB Chain-mount suspension bracket JSB Junction box snap-bracket BLC2 80% lumen maintenance DIM Pre-wired for 0-10V low voltage dimming (100-10%) DIM2 7 Line-voltage power control (100-50%) L/SP Less surge protector MSI 4,8 Wet location motion sensor and bracket PE 4 Photoelectric cell (button type) DLC 4 Designlights Consortium qualified for Parking Garage Luminaires NOM NOM Certified STEP 7: ACCESSORIES VAPSMB Surface spring mount bracket VAPQMB Quick-mount ceiling bracket VAPCMB Chain-mount bracket VAPJSB Junction box snap bracket VAPPMP Pendant monopoint VAPPMK Pendant monopoint kit VAPPMPB Pendant monopoint bracket HC36 8,11 Wire hook and 36' chain set RK1 T20BIT Hex base driver bit, Torx T20. Tamper resistant screws with center reject pin RK1 T20DRV Torx T20 screwdriver for use with tamper resistant screws with center reject pin 1 The CCT value providedis of lamp source and actual CCT will vary upon levels. 2 Non-DLC compliant. 3 For additional options, consult factory. 4 Must specify voltage. 5 5/8" long NPT threaded hub. 6 Not available with cord sensor or photocell options. 7 Available with 79LED and 114LED only. 8 For mounting up to 8', specify MS18; for mounting up to 20', specify MS120. 9 Not applicable with ASY or SYM optical film. 10 Requires CMB (chain mount bracket) option. 11 For stainless steel, specify STS (example: HC36 STS). 12 4100K and 5700K are LED CCTs. HOLOPHANE LED & Fluorescent EVT4 Series 9
HOLOPHANE Ordering Information Dimensional Details 10.5 mm (4-1/8 ) 10.5 mm (4-1/8 ) 21 mm (8-1/4 ) 139.1 mm (54-3/4 ) EVT4 Fluorescent Maximum Weight: 5.9 kg. (13.5 lbs.) Performance Specifications EVT4 Fluorescent Intended Use Ideal for use in applications where smart, energy-efficient fixtures are desired. Typical applications include, parking garage, canopy, transportation, school, hospital and exterior retail environments where moisture or dust is a concern. Polycarbonate enclosure protects fixture while remaining easy to service and clean. Construction UV-stabilized, injection-molded, impact-resistant, frosted polycarbonate housing with continuous poured-in-place, closed-cell gasket. 20-gauge steel channel and channel cover. Tool-less ballast and wiring access. Fixture design allows for 10-12% uplight. Optics UV-stabilized, injection-molded, impact-resistant, clear transparent, polycarbonate lens with aesthetic rib detail (.080 thick). Clear transparent, tamper-resistant, polycarbonate latches standard (8 Torx T-20 tamper-resistant screws included). Stainless steel latches also available. Reflectors are precision-formed, highperformance, segmented optics utilizing premium specular aluminum and optimized for both 1- and 2-lamp configurations. Provides 95% reflectivity and warranted for 25 years. Electrical Ballasts: Thermally protected, resetting, Class P, HPF, Sound Rating A+. 90 C rated Advance Cool Running ballast standard for T5HO. T8 ballast starting temperature is -18 C (0 F) and T5HO starting temperature is -29 C (-20 F). Lamps: 4100K lamps standard. Secured with rotary locking lampholders for ease of re-lamping and to minimize disconnection due to vibration or incidental contact. Installation Stainless steel surface spring-mounting brackets standard (2 included). A variety of stainless steel mounting options available: surface conduit entry on each end and on top, j-box mounting and mounting brackets for suspension with aircraft cable (cable not included). Optional stainless steel V-hooks available for chain hanging (chain not included). For horizontal mounting on a wall, application must be under a covered ceiling and QMB option recommended. 1/2-3/4 KO. Listings CSA Certified to UL and C-UL standards. NOM Certified (see Options). CSA Listed for ambient operation up to 40 C (104 F). EVT4 is wet-location listed for covered-ceiling applications. Product will be rated for damp location when wall mounted. IP65 rated. Warranty 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx 10 HOLOPHANE LED & Fluorescent EVT4 Series
Indoor Lighting Preferred Selections: Most Frequently Ordered Catalog Numbers EVT4 1 LUMINAIRE EVT4 128T5L 2 LAMP TYPE 128T5L 228T5L 132L 232L 3 SHIELDING 4 DISTRIBUTION WD 120 5 VOLTAGE 120 HVOLT 2/1 6 BALLAST CONF. 2/1 GEB80S GEB90S LP830 7 LAMP INSTALLED LP830 LP835 LP850 GLR 8 OPTIONS GLR EL14DW MSI MSI D Catalog Numbers for Entire Product Offering (Pricing and lead times may be affected) STEP 1: LUMINAIRE EVT4 EVT4 Fluorescent STEP 2: LAMP TYPE 1 T5HO 154L 254L 1 lamp, 54W 2 lamps, 54W T5 LAMPS 128T5L 1 lamp, 28W 228T5L 2 lamps, 28W T8 LAMPS 132L 232L 1 lamp, 32W 2 lamps, 32W STEP 6: BALLAST CONFIGURATIONS One ballast 2/1 Two 1-lamp ballast T5/T5HO 1.0 BF, PRS GEB80S 3,4.80 BF, step dimming (100%-50%) GEB90S 5.90 BF, PRS, step dimming T8 1.18 BF, IS GEB10IS.88 BF, IS GEB10ISL.76 BF, IS GEB10PS 1.00 BF, PS BSNP 3,6.87 BF, PS step dimming STEP 8: OPTIONS CMB 13 Chain-mount bracket JSB 13 Junction box snap bracket CS89 6 white cord, 16/3, no plug, wet location CS88 6 Brad Harrison 16/3 cord and straight blade plug set CS88L12 12 Brad Harrison 16/3 cord and straight blade plug set HS Houseside shield UPS Uplight shield LCF1 13 Prismatic light control film LCF2 13 Opaque light control film LCF3 13 Striped light control film STSL Stainless steel latches NOM NOM certified STEP 3: SHIELDING Clear Polycarbonate STEP 4: DISTRIBUTION WHITE BALLAST COVER General Distribution SPECULAR REFLECTOR WD Wide Distribution STEP 5: VOLTAGE MVOLT 120V-277V 120 120V HVOLT 2 347V-480V STEP 7: LAMP INSTALLED 85 CRI, 841 LP830 85 CRI, 830 LP835 85 CRI, 835 LP850 85 CRI, 850 STEP 8: OPTIONS GLR EL14DW 9 Internal fast-blow fusing Emergency lighting (1400 lumens) MSI 9.10,11 Wet location motion sensor with bracket, wired on/off MSI D 9,10,16 Wet location motion sensor with bracket wired for HI/WW dimming PE 9,12 Photoelectric cell (button type) RIF1 Radio interference filter, one per fixture B50CW 6,9 Cold weather battery pack WLF Wet location fitting (two outboard, top) WLFEND Wet location fitting (one end) WLFEND2 Wet location fittings (both ends) WLFIN Wet location fitting (two inboard, top) QMB 13 Quick-mount ceiling bracket STEP 8: ACCESSORIES VAPSMB Surface spring mount bracket VAPQMB Quick-mount ceiling bracket VAPCMB Chain-mount bracket VAPJSB Junction box snap bracket VAPPMP Pendant monopoint VAPPMK Pendant monopoint kit VAPPMPB Pendant monopoint bracket HC36 14,15 Wire hook and 36 chain set RK1 T20BIT Hex base driver bit, Torx T20. Tamper resistant screws with center reject pin RK1 T20DRV Torx T20 screwdriver for use with tamper resistant screws with center reject pin 1 To order fixtures WITHOUT lamps, remove the L from the description (example:evt4 132). 2 Not available with 28T5 or 1-lamp 32T8. 3 Available with 2-lamp unit only. 4 Available with 54T5H0. 5 Available with 28T5 only. 6 Available with 32T8 only. 7 Alternate lamp color need only be specified if pre-installed lamps are provided. 8 For additional options, consult factory. 9 Must specify voltage. 10 GEB10PS recommended. 11 For mounting up to 8', specify MS18; for mounting up to 20', specify MS120. 12 Not available with 480V. 13 Accessories may be ordered as a separate catalog numbers. 14 For stainless steel, specify STS (example: HC36 STS). 15 Requires chain mount bracket (CMB option). 16 For use with step dimming ballast. HOLOPHANE LED & Fluorescent EVT4 Series 11
Acuity Brands Lighting, Inc. Holophane Headquarters, 3825 Columbus Road, Granville, OH 43023 Acuity Brands Lighting Canada, Inc., 35B Minthorn Blvd., Markham, ON., L3T 7N5 Holophane Europe Limited, Bond Ave., Milton Keynes MK1 1JG, England Holophane, S.A. de C.V., Km. 31 Carretera Mexico-Cuautitlan 54900 Tultitlan Edo. De Mexico Contact your local Holophane factory sales representative for application assistance, and computer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at 866-759-1577. In Canada call 905-886-8967 or fax 905-886-7973. Warranty Five-year limited warranty. Full warranty terms located at www.acuitybrands.com/customerresources/ Terms_and_conditions.aspx Visit our web site at www.holophane.com Product specifications may change without notice. Please contact your local Holophane factory sales representative for the latest product information. HL-2489 11/12 2012 Acuity Brands Lighting, Inc. All Rights Reserved. The eco savings in the production of this brochure: 2 trees preserved for the future 4 lbs waterborne waste not created 659 gallons wastewater flow saved 73 lbs solid waste not generated 144 lbs net greenhouse gases prevented 1,098,965 BTUs energy not consumed Data obtained from the Mohawk Paper environmental calculator Printed in USA