- SMA COMMERCIA HEAT RECOVERY SYSTEM OW DEPTH, HEAT RECOVERY UIT WITH MUTIPE SPIGOTS AD ECOSMART COTROS. 34 09 085 800
AIR HADIG UITS (AHU S) TECHICA IFORMATIO BEEFITS OW DEPTH 185MM The shallowest available, ideal for applications where space is at a premium. HIGH EFFICIECY Heat recovery efficiency in excess of 70% possible, this together with low watt D.C. motors gives all round energy savings. QUIET, COMPACT & POWERFU ow noise levels, compact design and a high performance, provides the perfect engineering solution. ECOSMART EFFICIECY Supplied with Ecosmart control, providing a simple to install, easy to commission, energy efficient solution. PUG AD GO Ecosmart controls and sensors, (please refer to controls section) simply plug directly into the unit and extract then respond to the conditions being monitored. An ES-CI will also be required. FEXIBE SOUTIO Supply and extract airflows are easily fine tuned using integral speed adjustment and built in balancing dampers at each spigot. QUICK ISTAATIO A single point fixing bracket with anti-vibration strip enables quick and easy installation. OW MAITEACE COSTS Heat exchanger block and filters are easily removed from below and cleaned ensuring longer fan life whilst maintaining efficiencies. QUIETEST UIT AVAIABE Acoustically lined with advanced impeller technology, ensuring the quietest system possible. 5 YEAR WARRATY For peace of mind. TYPICA ISTAATIO: OPTIOS ICUDE: Ceiling Grid Mounted Supply Diffuser Ceiling Mounted Extract Grille Extract Air Fresh inlet Easy access to filters. Min and max speed and run on timer adjustment. Exhaust to outside opusxbox in ceiling void Extract fan section and commissioning controls. Knockout spigots. nuaire.co.uk 35
AIR HADIG UITS (AHU S) TECHICA IFORMATIO PERFORMACE - (m 3 /hr) 0 36 7 108 144 180 16 5 88 Casing 450 400 ISO 5801 007 AMCA 300 V Type D Air Density 1. kg/m 3 Fan Static Pressure (Pa) 350 300 50 00 150 3 75% 4 100% Code descriptions 100 50 11 5% 50% 0 0 10 0 30 40 50 60 70 80 Air volume flow rate (l/s) EECTRICA, SOUD & WEIGHT FC SC* Sound figures Induct sound power level re 1pW Breakout Weight Curve Ref W* * (amps) (amps) 15 50 500 1K K 4K 8K dba @3m (Kg) 1 (5%) Supply fan 5 0.05 0.05 Inlet 9 31 8 15 16 7 15 5 Outlet 19 6 3 14 8 4 4 Extract fan 5 0.05 0.05 Inlet 18 6 17 7 4 5 5 Outlet 35 39 43 34 34 6 16 (50%) Supply fan 17 0.1 0.1 Inlet 45 47 44 31 3 3 15 9 Outlet 35 4 39 30 4 1 9 Extract fan 17 0.1 0.1 Inlet 34 4 33 3 19 9 9 Outlet 51 55 59 50 50 4 3 3 (75%) Supply fan 51 0.3 0.3 Inlet 55 57 54 41 4 33 5 38 Outlet 45 5 49 40 34 19 Extract fan 51 0.3 0.3 Inlet 44 5 43 33 9 19 19 Outlet 61 65 69 60 60 5 4 4 (100%) Supply fan 10 0.7 0.7 Inlet 6 64 61 48 49 40 3 44 Outlet 5 59 56 47 41 9 6 Extract fan 10 0.7 0.7 Inlet 51 59 50 40 36 6 6 Outlet 68 7 76 67 67 59 49 *Fans are programmed with a soft start, therefore starting current is the same as the FC. Please note step curves shown are for information purposes only and are not individual units. The units actual duty range is infinitely variable. **W = Watts are total power consumption. ISTAATIO Bracket tongues engage with casing slots, then unit rotated up to align with fixing screw hole. Fixing screw hole. Slots in casing either side of unit to allow alternative mounting option. 36 09 085 800
AIR HADIG UITS (AHU S) TECHICA IFORMATIO COFIGURATIOS View from underside with cover removed Extract fan and commissioning controls Communications terminal box Supply fan and commissioning controls Mains voltage terminal box Air Discharge to outside via 15 dia spigot mm condensate tray and drain 100 dia spigot 15 dia spigot Filter Fresh air inlet via 15 dia spigot Mounting bracket with A.V. strip 4 x 100mm dia spigots Filter 100 dia spigot 15 dia spigot DIMESIOS (mm) 10 Mounting bracket Single screw unit fixing SIDE VIEW 185 4 x spigot knockouts. 1 x 15mm dia. and 3 x 100mm dia. for each and extract system VIEW FROM UDERSIDE WITH COVER REMOVED 15 dia. extract extract Condensate drain mm OD 15 dia. Intake Cable entry 0mm ED VIEW MOUTIG BRACKET TOP VIEW 50 extract Junction box for sensors etc 4 x end spigot knockouts 100mm dia. 685 extract Drain Mains connection box Bracket fixing 4 holes 7.5mm dia. 637 15 dia. 850 15 dia. discharge Weight: 5kg Download specification from www.nuaire.co.uk/specifications nuaire.co.uk 37
AIR HADIG UITS (AHU S) WIRIG TECHICA IFORMATIO WIRIG FOR The and extract fan within the unit are pre-wired to an external wiring box for ease of connection. All field wiring must be routed through a suitable local isolator. Basic wiring. Both and extract will run at constant speed. The fan duty is controlled via the 'Boost' setting. 30V - 50Hz 30V - 50Hz Isolator by others 3A fuse Isolator and switch by others 3A fuse Factory fitted links Boost switch Remove factory fitted link from '' to '1' E E Circuit board wiring. Other control wirings are available on each fan. Open the cover of the unit to gain access to these connections. 40V 1ph pre-wired to terminal box Switch live input pre-wired to terminal box S Trickle ink Pre-wired to junction box VT ET TR DO OT USE TEST 60 Run-on 30 (mins) 0 100 Max Airflow (%) Min Airflow (%) 5 100 5 Status Trickle and Boost operation. Both and extract will run at trickle and boost speed together. Closing the boost switch will cause both fans to run at boost setting. 30V - 50Hz Isolator and switches by others 3A fuse Boost switches Remove all factory fitted links E Boost signal for extract fan Boost signal for fan Wiring for independent boost. The and extract fan will trickle and boost independently. 38 09 085 800
AIR HADIG UITS (AHU S) TECHICA IFORMATIO COSUTATS SPECIFICATIO OPERATIO The and extract ventilation unit shall be as indicated on the drawings and shall be in accordance with the particular fan schedule in the specification. Where a stand alone heater battery it will raise the temperature of the air to the design room temperature after the air has passed through the heat exchanger. The ventilation unit shall automatically vary the ventilation rate, as it receives signals from one of the optional interconnected sensors. When signals are received, the fan shall either vary its speed proportionally or on a trickle and boost principle. COTRO OPTIOS All versions shall have the following functions integrally mounted within the fan unit on a purpose made PCB, all such components pre-wired and factory fitted by the manufacturer: - Integral speed control on and extract. Integral background ventilation control/set point. Integral boost ventilation control/set point. Integral run on timer. Integral S/ terminal for boost from remote switch, e.g. lightswitch. The fan unit will have a 5 year warranty. The unit shall have the facility to commission the and extract fans individually via inbuilt minimum and maximum speed adjustment, the fans themselves shall have infinitely variable speed control. Units shall be the as manufactured by uaire. - UIT SPECIFICATIO The fans shall be acoustically lined with high density class O flame retardant insulation, giving extremely low noise levels. The unit shall have a heat exchanger block manufactured from aluminium with a thermal efficiency of approximately 70% which shall be protected by G grade filters on and extract. It shall come complete with a condensate drip tray and drain connection, integral minimum and maximum speed controls, run on timer and facia mounted failure indication. The breakout noise level and power requirements shall be as detailed by the unit manufacturer and as detailed in the ventilation equipment schedule. The unit shall have low energy, high efficiency d.c. fan/motor assemblies with sealed for life bearings. The depth of the low profile unit shall not be greater than 185mm and shall incorporate a low profile single point mounting bracket, with a pre-stressed synthetic anti vibration strip. The unit shall be constructed with two removable panels allowing full maintenance access to all components. To facilitate the interconnection of branch ducts the unit shall have multiple spigot connections with integrated balancing dampers. Spigot connections provided. Download specification from www.nuairegroup.com/specifications nuaire.co.uk 39