Powrmatic Control Systems Industrial & Commercial Heating Systems 44 (0) 1460 53535 info@powrmatic.co.uk
INDUSTRIAL & COMMERCIAL WARM AIR HEATING SOLUTION INDUSTRIAL & COMMERCIAL HEATING CONTROL SOLUTIONS Powrmatic MC200 Powrmatic CPx The MC200 is a digital, high specification controller for individual heaters that provides the flexibility of variable time and temperature control as well as optimised start/stop prediction. Adjustable frost protection, remote burner reset and summer fan-only operation are also included. All cabinet heaters are factory fitted with the Lorem MC200 ipsum control dolor as sit standard. amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint The MC200 is a high specification heating controller that uses optimum start technology as standard. occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum By monitoring the heating systems previous performance it can determine the optimum time to turn the heating on to raise the building temperature to the required level. GAS G20 - GROUP H / G25 GROUP L MC200 Optimised Start Control is designed for ease of use and to maximise the performance of your heating system controlling only unit heater. OIL 35 SEC FUEL (STANDARD) 28 SEC FUEL (OPTIONAL) LPG PROPANE G31 Flexibility The MC200 has the ability to set a variety of time and temperature programs, whilst still enabling the user to adjust the temperature within controlled limits if required. Adjustable frost protection protects against low temperatures. The MC200 also allows for remote burner lockout reset, and summer fan only operation. Cabinet Heaters Heaters are supplied ready for automatic operation and are complete with safety and comfort controls. The Powrmatic CPx, VPC, TE are factory fitted with the MC200. Lorem ipsum dolor sit amet Economy One of the key energy-saving features of the MC200 is it s ability to set a variety of time and temperature programs, including optimum start configuration with weather compensation. By monitoring the previous performance of the heater and taking account of ambient temperatures, the MC200 can determine the optimum time to turn the heating on. Optimum stop can be configured to save energy at the end of the heating period. The MC200 can provide direct control of both high/low and modulating burners the latter via an internally generated 0-10V signal. The user keypad and back-lit display allows easy selection of heating and fan-only modes, override functions and full reset. The MC200 will also provide a read-out of the burner s operating hours to ensure servicing at appropriate intervals. When programmed with the correct data, it can also provide an indication of the running costs of the appliance. Powrmatic pursues a policy of continuous improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure. 2
TYPICAL APPLICATIONS COMPATIBLE WITH: Warehouses NVx Factories NVS Garage OUH Workshops CP Distribution Centres Radiant (Linear & U-Tube) Aircraft CP (factory Hangers fitted VPC (factory fitted) TE (factory fitted) Security The MC200 features password-controlled access, This can be locked in various combinations to allow different levels of password-controlled access. There are two levels of password-controlled access, the second level being for use by commissioning and servicing engineers. This provides access to parameters normally used only in the initial setting of the controller, accessing the fault log and resetting the system Ease Of Use The MC200 features an easy-to-use interface for selection of heating and fan-only modes, override functions and full reset. Location When used with a remote sensor the MC200 can be sited wherever is convenient, such as in a manager s office. If used with its internal temperature sensor, the unit should be located in a spot that is generally representative of the area to be heated. In such cases it should be sited 1.7m above floor level away from draughts and direct sources such as sunlight or heat emitters. It should also be in an easily accessible position for programming and operation. Approvals All Powrmatic controls are CE approved. Need help with your control system? Check out our YouTube Channel for our helpful How To tutorials. CUSTOMER BENEFITS CUSTOMER Simple BENEFITS to use controls Anywhere installation for convenient access Lcon sectetur adipiscing elit, sed do eiusmod tempor incididunt Security ut labore protected et for dolore authorised magna personnel aliqua. Instant temperature adjustment Duis aute irure dolor in reprehenderit 24/7 programmable in voluptate temperature velit esse control cillum Lorem ipsum dolor sit amet, consectetur Manufactured adipiscing in the UK elit, APPROVED PRODUCT Lcon sectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 3
INDUSTRIAL & COMMERCIAL HEATING CONTROL SOLUTIONS INDUSTRIAL & COMMERCIAL WARM AIR HEATING SOLUTION Powrmatic MC300 Multi CPx Powrmatic s new MC300 Multi digital controller enables the control of multiple numbers of unit air heaters and features optimum start/stop with weather compensation, adjustable frost protection, remote burner reset and summer fan-only operation as standard. Lorem A slave ipsum unit dolor is factory sit amet, fitted consectetur within each adipiscing heater prior elit, to sed delivery, do eiusmod which tempor gives significant incididunt savings ut labore on et the dolore time and magna aliqua. cost of Ut installation. enim ad minim Further veniam, cost quis reductions nostrud are exercitation achieved ullamco through laboris the use nisi of low ut aliquip voltage ex control ea commodo wiring consequat. (5-core for Duis on/off, aute 6-core irure dolor for high/low, in reprehenderit 7-core for in modulating voluptate velit units). esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum An easy-to-use interface facilitates setting of a variety of time and temperature programs, as well as the ability to adjust temperature within controlled boundaries if required. MC300 Multi software provides up to GAS 14 time G20 - settings, GROUP H / G25 each GROUP of L which can be assigned to any single day of the week, or in groupings such as weekdays or weekends. OIL There 35 are SEC FUEL two (STANDARD) levels of 28 password SEC FUEL (OPTIONAL) controlled access, one for users and the other for commissioning and servicing engineers. LPG PROPANE G31 Multiple Connectivity When controlling multiple heaters the MC300 Multi acts as the master unit and communicates with a factory-fitted PCB on each of the slave heaters it controls, thereby reducing the cost and time of installation. Flexibility The MC300 has the ability to set a variety of time and temperature programs, whilst still enabling the user to adjust the temperature within controlled limits if required and adjustable frost protection against low temperatures. The MC300multi also allows for remote burner lockout reset, and summer fan only operation. Further cost reductions are achieved through the use of low voltage control wiring (5-core for on/off, 6-core for Lorem ipsum dolor sit amet high/low, 7-core for modulating units). Economy One of the key energy-saving features of the MC300 is it s ability to set a variety of time and temperature programs, including optimum start configuration with weather compensation. By monitoring the previous performance of the heater and taking account of ambient temperatures, the MC300 can determine the optimum time to turn the heating on. Optimum stop can be configured to save energy at the end of the heating period. The MC300 can provide direct control of both high/low and modulating burners. The user keypad and back-lit display allows easy selection of heating and fan-only modes, override functions and full reset. The MC300 will also provide a read-out of the burner s operating hours to ensure servicing at appropriate intervals. When programmed with the correct data, it can also provide an indication of the running costs of the appliance. Powrmatic pursues a policy of continuous improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure. 4
TYPICAL APPLICATIONS COMPATIBLE WITH: All Powrmatic warm air and radiant heaters Warehouses Factories Garage Workshops Distribution Centres Aircraft Hangers Security The MC300 features password-controlled access, This can be locked in various combinations to allow different levels of password-controlled access. There are two levels of password-controlled access, the second level being for use by commissioning and servicing engineers. This provides access to parameters normally used only in the initial setting of the controller, accessing the fault log and resetting the system Ease Of Use The MC300 Multi features an easy-to-use interface for selection of heating and fan-only modes, override functions and full reset. Location When used with a remote sensor the MC300 Multi can be sited wherever is convenient, such as in a manager s office. If used with its internal temperature sensor, the unit should be located in a spot that is generally representative of the area to be heated. In such cases it should be sited 1.7m above floor level away from draughts and direct sources such as sunlight or heat emitters. It should also be in an easily accessible position for programming and operation. Approvals All Powrmatic products are CE approved. Need help with your control system? Check out our YouTube Channel for our helpful How To tutorials. Simple to use controls CUSTOMER Anywhere installation for BENEFITS convenient access Security protected for authorised personnel Lcon sectetur adipiscing elit, sed do eiusmod tempor incididunt 24/7 ut programmable labore et dolore temperature magna control aliqua. Duis aute irure dolor in reprehenderit Instant in voluptate temperature velit adjustment esse cillum Manufactured in the UK Lorem ipsum dolor sit amet, consectetur adipiscing elit, Lcon sectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. APPROVED PRODUCT 5 CUSTOMER BENEFITS
Heat Decrease Select Increase Heat Decrease Select Increase MC300 Multi Connectivity (optional) The MC300 Multi can be connected to each heaters slave PCB in various ways depending on your application setup. The maximum cable length between each heater is 100m. Unlike other multi zone systems, the MC300 Mutli setup keeps costs extremely low as the factory fitted slave PCB connects each heater and not by another slave controller. Here are just a few examples of how multiple heaters can be connected with the MC300 Multi. MC300 Multi Master Control Unit Heaters Factory Fitted With Slave Unit MC300 Multi Master Control Unit Heaters Factory Fitted With Slave Unit 6
Heat Decrease Select Increase Heat Decrease Select Increase MC300 Multi Connectivity (optional) MC300 Multi Master Control Unit Heaters Factory Fitted With Slave Unit MC300 Multi MC300 Master Multi Master Control Control Unit Heaters Factory Fitted With Slave Unit 7
INDUSTRIAL INDUSTRIAL & COMMERCIAL & COMMERCIAL WARM HEATING AIR HEATING CONTROL SOLUTION SOLUTIONS Powrmatic CPx The Powrtol RR are the rugged specification model. All controls are kept in a metal constructed box, giving you Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna The Powrtrol RR is designed for ease of use and to maximize the performance of your heating system aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. controlling a single unit. The Powrtrol RR has the added benefit allowing for remote burner lockout reset. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum The Powrtrol RR have a digital control allowing for 16 on/off programs throughout the weekly period. GAS G20 - GROUP H / G25 GROUP L The unit is fitted with twin dial thermostat enabling day and night(frost) OIL LPG Powrmatic Powrtrol RR digital timed control, and twin day and night time temperature control. temperatures to be easily adjusted. Both thermostats are secured away and accessed by 2 screws. 35 SEC FUEL (STANDARD) 28 SEC FUEL (OPTIONAL) PROPANE G31 Robust Design The Powrtrol RR is designed for a rugged life. With an all metal box construction and individually replaceable parts, a tough design which is easily repairable, gives the controller long life in a hostile environment. Digital Time Controls The Powrtrol RR has a protected digital timer. The controls are simple to program and reset if any problems occur with your heating system. (spares item only as of January 1st 2018) SPARES ITEM ONLY AS OF JANUARY IST 2018 * SPARES ITEM ONLY AS OF JANUARY IST 2018 Economy The Powrtrol RR has a digital control allowing for 16 on/ off programs throughout the weekly period. The unit has two separate thermostats each with a single dial. Both thermostats are secured away and accessed by 2 screws. Ease Of Use The Powrtrol features an easy-to-use interface for selection of heating and fan-only modes, override functions and full reset. Lorem ipsum dolor sit amet Location The Powrtrol RR unit should be located in a convenient spot that is generally representative of the area to be heated. It should be sited 1.7m above floor level away from draughts and direct sources such as sunlight or heat emitters. It should also be in an easily accessible position for programming and operation. Approvals All Powrmatic controls are CE approved. Need help with your control system? Check out our YouTube Channel for our helpful How To tutorials. Powrmatic pursues a policy of continuous improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure. 8
TYPICAL APPLICATIONS COMPATIBLE WITH: NVx NVS Warehouses OUH Factories Radiant Garage (Linear Workshops & U-Tube) CP Distribution (Standalone Centres option for more basic control) VPC (Standalone option for more basic control) Aircraft Hangers CP (Standalone option for more basic control) RBR Relay Box Flexibility The RBR relay box allows you to control 2,4, or 6 heaters from a single MC200 or Powrtrol controller. Simply wire from the controller to relay boxes (RBR) and to continue to each heater to give full functionality. (Connection diagrams are available on the next page) Robust Design The RBR is designed for a rugged life. With an all metal box construction and individually replaceable parts, a tough design which is easily repairable, gives the unit long life in a hostile environment. Location The RBR relay box is generally located near to the existing controller to ease connection and reduces wiring cost. RBR Relay Box CUSTOMER BENEFITS (POWRTROL RR) CUSTOMER Simple to use controls BENEFITS for single unit Anywhere installation for convenient access 24/7 programmable temperature control Lcon sectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Instant temperature adjustment Duis aute irure dolor in reprehenderit in voluptate Manufactured velit esse in the cillum UK Lorem ipsum dolor sit amet, consectetur adipiscing elit, APPROVED PRODUCT Lcon sectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. 9
5A 1A Heat Decrease Select Increase RBR Relay Box Connectivity (optional) RBR Options They are used to facilitate control of multiple units with one controller and are available as per the below: RBR2 - Control up to 2 units RBR4 - Control up to 4 units RBR6 - Control up to 6 units Note: Each heater must be fitted with its own lockout reset button, if low level reset is required. (burner only) Here are just a few examples of how multiple heaters can be connected with the MC200. RBR2 RBR2 MC200 or Powrtrol powrtrol 10
5A 1A 5A 1A Heat Decrease Select Increase Heat Decrease Select Increase RBR Relay Box Connectivity (optional) RBR4 RBR4 MC200 or Powrtrol powrtrol RBR6 RBR6 MC200 or Powrtrol powrtrol 11
Powrmatic are a leading British manufacturer of industrial and commercial heating equipment. With over 60 years of experience in the HVAC industry, our products are built with integrity, and characterised by high quality and energy-saving designs, delivering exceptional performance and facilitating compliance with energy and emission regulations. Powrmatic are also a specialist British manufacturer of natural, powered and smoke ventilation products working closely with a wide range of architects and consultants whilst also a supplier of a range of air conditioning and evaporative cooling equipment. We provide a full product application advice service for architects, mechanical engineers, installers and end users to ensure the best products are selected to meet the required budget, design and regulatory requirements. Our heating and ventilation engineers are also supported by distribution partners and a network of installers who are knowledgeable in the supply, installation and maintenance of all of our equipment. Get in touch United Kingdom Office Powrmatic Limited Hort Bridge Ilminster Somerset TA19 9PS tel: 44 (0) 1460 53535 fax: 44 (0) 1460 52341 e-mail: info@powrmatic.co.uk web: Ireland Office Powrmatic Ireland 45 Broomhill Close Tallaght Dublin 24 tel: 353 (0) 1452 1533 fax: 353 (0) 1452 1764 e-mail: info@powrmatic.ie web: www.powrmatic.ie FOR THE LATEST NEWS, CASE STUDIES, AND TECHNICAL SUPPORT FOLLOW US ON #keepingthenationwarm ICOM Energy Association EURO-AIR QUALITY Powrmatic pursues a policy of continues improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure. Issue 5.2 2018