INTEGRALINE Price List 04/2012 ascobloc Gastro-Gerätebau GmbH Fax: 0049/351-4533-433 1 Edition: 01.04.2012
Table of Contents 2 General Technical Features 3 Ranges / Cooking Hobs Electric Ranges with cast-iron hot plate 4 Gas Ranges with open burners 5 Electric Warming Plates with glass ceramic hob 6 Electric Ranges with glass ceramic hob 7 Electric Ranges with induction 8 Electric Induction Wok 9 Bain-Maries & Water Cookers Electric Bain-Marie / Combination Cooker 10 Electric Pasta Cooker 11 Deep Fat Fryers Electric Deep Fat Fryer 12 Electric Chip Scuttle 13 Frying, Griddle & Grill Plates Electric Frying Plates with compense bottom 14 Electric Frying Plates with glass ceramic hob 15 Electric Griddle & Grill Plates with steel surface 16 Electric Grill 18 Baking Ovens Electric Baking and Roasting Oven 19 Page ascobloc Gastro-Gerätebau GmbH 2
General Technical Features Large range of appliances Simple planning by standard sizes Appliances are free to combine May be integrated into work tops of stainless steel, natural or synthetic stones Easy to clean All appliances CE-tested Ready to build-in: appliances are pre-wired to control panel Protection level IPX5 The appliances are made of chrome nickel steel, material no. 1.4301 All visible metal surfaces are grinded with grain 320. Electric connection 400 V 3 N AC 50 Hz Gas pipe connection 1/2 Function module and switch panel protected through a metal sheet casing All drawings shown in this price list are for symbolic illustration only and do not reflect a detailed and scale-proof reproduction of reality. ascobloc Gastro-Gerätebau GmbH 3
Electric Ranges with Cast-iron Hot Plates Cast-iron hot plates with 2 cooking zones each 3.0 kw with separate regulation Each cooking zone regulated via 5-phase switch Hot Plates accommodated in a closed, 3 mm deep recess with support collar and are thermally decoupled from this Economy mode by limited temperature via protector Function module and switch panel protected through a metal sheet casing IEH 210 IEH 410 IEH 210 IEH 410 Number of Hot plates 1 2 Dimensions hot plates (mm) 285 x 560 x 20 285 x 560 x 20 Connected load 6.0 kw/400 V/3N 50/60 Hz 12.0 kw/400 V/ 3N 50/60 Hz External dimensions (mm) 400 x 610 700 x 610 Cut-out working plate (mm) 375 x 585 675 x 585 Cut-out control panel (mm) 375 x 115 675 x 115 Weight (kg) 27 50 Price (EUR) 1.326,00 2.106,00 ascobloc Gastro-Gerätebau GmbH 4
Gas Ranges with Open Burners One (IGH 210) or two (IGH 410) deep drawn wells accommodating, two open burners each Hob seamlessly welded into the top frame Depth of hob 65 mm rounded bottom with large radius Each burner with pilot flame and thermoelectric flame supervision Switch unit connected with cooking surface through gas lines Narrow meshed support grid, grid pattern optimised to minimise flame collision IGH 210 IGH 410 IGH 210 IGH 410 Number of Burners 2 4 Burner 1 x C (3.9 kw), 1 x D (5.4 kw) 2 x C (3.9 kw), 2 x D (5.4 kw) Rated load 9.3 kw 18.6 kw External dimensions (mm) 400 x 610 700 x 610 Cut-out working plate (mm) 375 x 585 675 x 585 Cut-out control panel (mm) 375 x 115 675 x 115 Weight (kg) 11 20 Price (EUR) 1.368,00 2.160,00 ascobloc Gastro-Gerätebau GmbH 5
Electric Warming Plates with Glass Ceramic Hob Full glass ceramic hob, waterproof sealed into the top-frame Easy to clean Heating with smooth and continuous regulation via energy regulator IEH 010 IEH 020 IEH 110 IEH 010 IEH 020 IEH 110 Function warming warming with cooking level Hob dimensions (mm) 310 x 540 560 x 550 310 x 540 Connected load 0.83 kw/230 V/50/60 Hz 1.42 kw/230 V/50/60 Hz 2.5 kw/230 V/50/60 Hz External dimensions (mm) 400 x 610 600 x 610 400 x 610 Cut-out working plate (mm) 375 x 585 575 x 585 375 x 585 Cut-out control panel (mm) 375 x 115 575 x 115 375 x 115 Weight (kg) 13 27.5 13 Price (EUR) 1.228,00 1.607,00 1.390,00 Accessories (included) Scraper for glass ceramic surface Scraper for glass ceramic surface Scraper for glass ceramic surface Additional-accessories for IEH 010, 020, 110: Price (EUR) ACC 559 10 replacement blades for scraper 22,00 ACC 560 extra scraper for glass ceramic surface 44,00 ACC 561 Cleaning agent for glass ceramic surface 22,00 ascobloc Gastro-Gerätebau GmbH 6
Electric Ranges with Glass Ceramic Hob Full glass ceramic hob, waterproof sealed into the top frame Easy to clean Rapid heat up Cooking zones separated by decorative pattern Each cooking zone regulated via 7-phase and 5-phase switches IEH 300 IEH 500 IEH 300 IEH 500 Number of cooking zones 2 4 Hob dimensions (mm) 333 x 543 633 x 543 Dimension of cooking zones (mm) 2 x (230 x 230) 4 x (230 x 230) Connected load 6.0 kw/400 V/3 N 50/60 Hz 12.0 kw/400 V/3 N 50/60 Hz External dimensions (mm) 400 x 610 700 x 610 Cut-out working plate (mm) 375 x 585 675 x 585 Cut-out switch panel (mm) 375 x 115 675 x 115 Weight (kg) 13.5 24 Price (EUR) 1.358,00 2.320,00 Accessories (included) Scraper for glass ceramic surface Scraper for glass ceramic surface IEH 300.110 IEH 500.110 Option with pot detection with pot detection Price (EUR) 1.769,00 3.143,00 Additional-accessories for IEH 300, 300.110, 500, 500.110: Price (EUR) ACC 559 10 replacement blades for scraper 22,00 ACC 560 extra scraper for glass ceramic surface 44,00 ACC 561 Cleaning agent for glass ceramic surface 22,00 ascobloc Gastro-Gerätebau GmbH 7
Induction Range with Glass Ceramic Hob Full glass ceramic hob, waterproof sealed into the top-frame Induction generator of 5.0 kw each cooking zone with pot detection and fault report Easy to clean Rapid heat up Cooking zones separated by decorative pattern Load adjustable through a switch-potentiometer-combination IEH 350 IEH 550 IEH 350 IEH 550 Number of Cooking zones 2 4 Hob dimensions (mm) 313 x 543 650 x 560 Connected load 10.0 kw/400 V 20.0 kw/400 V External dimensions (mm) 400 x 610 700 x 610 Cut-out working plate (mm) 375 x 585 675 x 585 Cut-out switch panel (mm) 375 x 115 675 x 115 Weight (kg) 25 40 Price (EUR) 7.073,00 11.565,00 Accessories (included) Scraper for glass ceramic surface Scraper for glass ceramic surface Additional-accessories for IEH 350, 550 Price (EUR) ACC 559 10 replacement blades for scraper 22,00 ACC 560 extra scraper for glass ceramic surface 44,00 ACC 561 Cleaning agent for glass ceramic surface 22,00 ascobloc Gastro-Gerätebau GmbH 8
Induction Wok Spherical glass ceramic surface, waterproof sealed into the top-frame Easy to clean Induction wok with integrated wok coil for an extensive heating of the wok bowl Load adjustable through a switch-potentiometer-combination IEC 200 Number of cooking zones 1 IEC 200 Connected load 5.0 kw/400 V External dimensions (mm) 400 x 610 Cut-out for glass ceramic wok (Ø) 300 Cut-out working plate (mm) 375 x 585 Cut-out switch panel (mm) 375 x 115 Weight (kg) 20 Price (EUR) 4.982,00 Accessories (included) 1 Wok bowl Additional-accessories for IEC 200: Price (EUR) ACC 561 Cleaning agent for glass ceramic surface 22,00 ACC 1027 additional wok bowl 255,00 ascobloc Gastro-Gerätebau GmbH 9
Electric Bain Maries / Combination Cookers Bain Maries (IEW 250, 450): Deep drawn basin seamlessly welded into the top, for GN 1/1 and 2/1 200 mm deep Indirect radiation heating, adjustable by thermostat 30 up to 100 C Drained via embossed ¾ spout with ball valve Dry-out protection by temperature limit switch Combination Cooker (IEW 400): Appliance suitable for boiling (e.g. sausages) Water deficit control With flap lid and support bar IEW 250 IEW 450 IEW 400 IEW 250 IEW 450 IEW 400 Size of GN accommodation GN 1/1 GN 2/1 GN 1/1 Basin dimensions (mm) 305 x 510 x 210 630 x 510 x 210 305 x 510 x 210 Connected load 2.35 kw/400 V 4.7 kw/400 V 4.6 kw/400 V External dimensions (mm) 400 x 610 700 x 610 400 x 610 Cut-out working plate (mm) 375 x 585 675 x 585 375 x 585 Cut-out switch panel (mm) 375 x 115 675 x 115 375 x 115 Weight (kg)) 15 21 22,5 Price (EUR) 1.229,00 1.667,00 1.647,00 Available on request: IEW 650 (GN 3/1) and IEW 850 (GN 4/1)! Additional-accessories for IEW 250, 450, 400: Price (EUR) ACC 543 GN-container perforated for basin 305 x 510 (IEW 250, 400) 64,00 ACC 540 GN-container perforated for base for basin 630 x 510 (IEW 450) 91,00 ACC 1022 Support 325 mm long for smaller GN-containers 40,00 ACC 1023 Support 530 mm across for smaller GN-containers 40,00 ascobloc Gastro-Gerätebau GmbH 10
Electric Pasta Cookers Deep drawn basin seamlessly welded into the top-frame With chilling rim to prevent foam overflow and cold zone underneath heating elements Suspension rail for pasta baskets Metal shield against over-foaming Drained via embossed ¾ spout with ball valve Automatic cut off when lifting the heating elements Step switching with 3 heating levels, protection against overheating Water inlet with anti-reverse valve Operation via switch and solenoid valve Heating elements can be fully lifted out for cleaning basin Automatic power switch-off when lifting the heating elements IEW 460 IEW 660 IEW 460 IEW 660 Number of Cooking basins 1 2 Basin dimension 200 x 400 200 x 400 Total capacity (l) 12 2 x 12 Useable capacity (l) 8 2 x 8 Connected load 6.0 kw/400 V/3 N 50/60 Hz 12.0 kw/400 V/3 N 50/60 Hz External dimensions (mm) 400 x 610 600 x 610 Cut-out working plate (mm) 375 x 585 575 x 585 Cut-out switch panel (mm) 375 x 115 575 x 115 Weight (kg) 25 40 Price (EUR) 1.999,00 3.518,00 Accessories (included) 1 foam over shield, 2 pasta baskets 2 foam over shields, 4 pasta baskets Additional-accessories for IEW 460, 660: Price (EUR) ACC 1001 Pasta basket 300 x 90 x 210 mm 117,00 ACC 1002 Pasta basket 145 x 90 x 210 mm 106,00 ACC 1032 Additional pasta basket 145 x 90 x 210 mm, handle left side 106,00 ACC 1033 Additional pasta basket 145 x 90 x 210 mm, handle right side 106,00 ascobloc Gastro-Gerätebau GmbH 11
Electric Deep Fat Fryer Deep drawn basin seamlessly welded into the top-frame, with chilling rim to prevent foam overflow and cold zone underneath heating elements Drained via embossed ¾ spout with ball valve Heating elements may be fully lifted out for cleaning basin Automatic cut off when lifting the heating elements Regulation by thermostat 100 up to 195 C Protection against overheating with 2nd safety measure according to VDE/IEC Support rail for suspending frying baskets IEF 124 IEF 224 IEF 144 IEF 124 IEF 224 IEF 144 Number of basins 1 2 1 Basin dimensions (mm) 200 x 400 200 x 400 400 x 400 Total capacity (l) 12 2 x 12 24 Useable capacity (l) 8 2 x 8 16 Connected load 9.0 kw/400 V/3N50/60 Hz 18.0 kw/400 V/3N50/60 Hz 18.0 kw/400 V/3N50/60 Hz External dimensions (mm) 400 x 610 600 x 610 600 x 610 Cut-out working plate (mm) 375 x 585 575 x 585 575 x 585 Cut-out switch panel (mm) 375 x 115 575 x 115 575 x 115 Weight (kg) 20 34 26 Price (EUR) 1.679,00 2.930,00 2.630,00 Accessories (included) Accessories optional (included) Option 1 lid, 1 strainer base, 1 frying basket 2 lid, 2 strainer bases, 2 frying baskets 1 lid, 2 strainer bases, 2 frying baskets 1 lid, 1 strainer base, 1 frying basket IEF 124.100 IEF 224.100 IEF 144.100 Fat Fryer with electronic control through keypad Price (EUR) 2.188,00 3.948,00 3.138,00 Additional-Accessories for IEF 124, 144, 224, 040: Price (EUR) ACC 354 Additional fryer basket, 170 x 305 x 120 mm 95,00 ACC 1015 Grease collecting container 387,00 ACC 1016 Lid for collection container 165,00 ACC 355 Additional fryer basket, 370 x 305 x 120 mm 112,00 ascobloc Gastro-Gerätebau GmbH 12
Electric Chip Scuttle Deep drawn basin seamlessly welded into top frame Accommodates GN 1/1-containers and a perforated shuffle sheet Heated from above by radiant heating element Smooth and continuous temperature regulation Drainage down wards for cleaning the basin IEF 040 Size of accommodation GN 1/1 IEF 040 Basin dimensions (mm) 305 x 510 x 210 Connected load 1.1 kw/230 V/3 N 50/60 Hz External dimensions (mm) 400 x 610 Cut-out working plate (mm) 375 x 585 Cut-out switch panel (mm) 375 x 115 Weight (kg) 21 Price (EUR) 1.368,00 Accessories (included) 1 perforated tray for drainage and chip removal, 1 GN 1/1-200 ascobloc Gastro-Gerätebau GmbH 13
Electric Frying Plates with Compense Bottom Multifunctionality by a 65 mm deep basin Deep drawn basin of stainless steel with a large radius seamlessly welded into top-frame Bottom of basin shimmed with a copper plate Rapid heat-up, strong heat conductivity, perfect heat distribution over entire frying surface Non-stick surface Compatible with GN-basins Emptied via closable scrap outlet, Ø 50 mm at the front Radiant heating elements of 3.5 kw per zone Controlled by thermostat 50 up to 300 C IEB 230 IEB 430 IEB 230 IEB 430 Number of frying zones 1 2 basin dimensions (mm) 305 x 510 x 65 630 x 510 x 65 GN-basin 1/1 2/1 Connected load 3.5 kw/400 V/3 N 50/60 Hz 7.0 kw/400 V/3 N 50/60 Hz External dimensions (mm) 400 x 610 700 x 610 Cut-out working plate (mm) 375 x 585 675 x 585 Cut-out switch panel (mm) 375 x 115 675 x 115 Weight (kg) 26 44 Price (EUR) 1.582,00 2.544,00 Accessories (included) 1 PTFE plug 1 PTFE plug Additional-accessories for IEB 230, 430: Price (EUR) ACC 607 Spatula for frying plate 63,00 ACC 887 Splashguard (IEB 230) 95,00 ACC 888 Splashguard (IEB 430) 112,00 ACC 407 Lid for basin (IEB 230) 181,00 ACC 408 Lid for basin (IEB 430) 231,00 ascobloc Gastro-Gerätebau GmbH 14
Electric Frying Plates with Glass Ceramic Hob Full glass ceramic hob, waterproof sealed into the top-frame Easy to clean Rapid heat-up Emptied via closable scrap outlet, Ø 28 mm at the front Tiltable and detachable splash guard frame With electronic power setting device IEB 231 IEB 431 IEB 231 IEB 431 Number of frying zones 1 2 Glass ceramic frying hob dimensions (mm) 320 x 490 520 x 490 Heating zones 1 x 2.5 kw 1/3 x 1.8 kw + 2/3 x 2.5 kw Connected load 2.5 kw/400 V/3 N 50/60 Hz 4.3 kw/400 V/3 N 50/60 Hz External dimensions (mm) 400 x 610 600 x 610 Cut-out working plate (mm) 375 x 585 575 x 585 Cut-out switch panel (mm) 375 x 115 575 x 115 Weight (kg) 17 32 Price (EUR) 1.700,00 2.170,00 Accessories (included) 1 Scraper for glass ceramic surface, 1 Splash guard 1 Scraper for glass ceramic surface, 1 Splash guard Additional-accessories for IEB 231, 431: Price (EUR) ACC 561 Cleaning agent for glass ceramic surface 22,00 ACC 560 Additional scraper for glass ceramic surface 44,00 ACC 559 10 replacement blades for scraper 22,00 ascobloc Gastro-Gerätebau GmbH 15
Electric Griddle- & Grill Plates with Steel Surface Frying surface made of heat resistant steel, optional hard chrome-plated Three different surfaces available: smooth, ribbed, half-ribbed/half smooth Frying zones separately controlled by thermostat Rapid heat-up, strong heat conductivity, perfect heat distribution over entire frying surface Radiant heating elements of 4.6 kw Controlled by thermostat from 50 up to 300 C IEB 240 IEB 260 IEB 440 IEB 240 IEB 260 IEB 440 Number of frying zones 1 1 2 Frying surface dimensions (mm) 305 x 510 305 x 510 630 x 510 ribbed (with an smooth (straight Type of surface inclination of 1 % without inclination) towards the front) ribbed (with an inclination of 1 % towards the front) Connected load 4.6 kw/400 V/3N 50/60 Hz 4.6 kw/400 V/3N 50/60 Hz 9.2 kw/400 V/3N 50/60 Hz External dimensions (mm) 400 x 610 400 x 610 700 x 610 Cut-out working plate (mm) 375 x 585 375 x 585 675 x 585 Cut-out switch panel (mm) 375 x 115 375 x 115 675 x 115 Weight (kg) 22 22 44 Price (EUR) 1.988,00 1.667,00 3.485,00 Alternative IEB 240.400 IEB 260.400 IEB 440.400 Version: hard-chrome plated Price (EUR) 2.502,00 2.181,00 4.205,00 ascobloc Gastro-Gerätebau GmbH 16
Electric Griddle- & Grill Plates with Steel Surface Frying surface made of heat resistant steel, optional hard chrome-plated Three different surfaces available: smooth, ribbed, half-ribbed/half smooth Frying zones separately controlled by thermostat Rapid heat-up, strong heat conductivity, perfect heat distribution over entire frying surface Radiant heating elements of 4.6 kw Controlled by thermostat from 50 up to 300 C IEB 450 IEB 460 IEB 450 IEB 460 Number of frying zones 2 2 Frying surface dimensions (mm) 630 x 510 630 x 510 Type of surface half-ribbed/half smooth smooth (straight (with an inclination of 1 % without inclination) towards the front) Connected load 9.2 kw/400 V/3N 50/60 Hz 9.2 kw/400 V/3N 50/60 Hz External dimensions (mm) 700 x 610 700 x 610 Cut-out working plate (mm) 675 x 585 675 x 585 Cut-out switch panel (mm) 675 x 115 675 x 115 Weight (kg) 52 52 Price (EUR) 3.197,00 2.970,00 Alternative IEB 450.400 IEB 460.400 Version: hard-chrome plated Price (EUR) 3.917,00 3.689,00 ascobloc Gastro-Gerätebau GmbH 17
Electric Vapor-Grill Deep drawn basin, seamlessly welded into the top, with drainage Drainage via ball valve ¾ Heating elements can be lifted out Grill surface made of folded stainless steel profiles Continuous power regulation Indirectly heated by tubular heating elements IEG 200 IEG 400 IEG 200 IEG 400 Number of frying zones 1 2 (1/3 und 2/3) Basin dimension (mm) 322 x 428 478 x 428 Grill surface dimensions (mm) 305 x 390 455 x 390 Connected load 4.4 kw/400 V 6,6 kw/400 V Water filling (l) 4 6 External dimensions (mm) 444 x 610 620 x 610 Cut-out working plate (mm) 395 x 585 595 x 585 Cut-out switch panel (mm) 375 x 115 575 x 115 Weight (kg) 20 30 Price (EUR) 1.679,00 2.930,00 ascobloc Gastro-Gerätebau GmbH 18
Electric Baking and Roasting Oven Built-in baking and roasting oven for a bearing body Upper and lower heat separately regulated by thermostat With removable bottom cast iron plate as heat storage Optionally available with additional forced-air heating (IEH 050) 3 level rail supports for baking trays and grids Oven wired ready to install with lateral control panel IEH 030 IEH 050 Type of oven IEH 030 IEH 050 Baking and roasting oven Baking and roasting oven with forced air Oven dimensions (mm) 538 x 465 x 252 538 x 465 x 252 Connected load 4.2 kw/400 V/3N PE AC 50/60 Hz 6.0 kw/400 V/3N PE AC 50/60 Hz External dimensions (mm) 750 x 660 x 437 750 x 660 x 437 Weight (kg) 40 45 Price (EUR) 1.943,00 2.817,00 Accessories (included) 1 Gridiron chrome-plated (530 x 400 mm), 1 Baking tray enamelled (530 x 400 mm) 1 Gridiron chrome-plated (530 x 400 mm), 1 Baking tray enamelled (530 x 400 mm) Additional-accessories for IEH 030, 050: Price (EUR) ACC 208 1 Gridiron chrome-plated (530 x 400 mm) 54,00 ACC 228 1 Baking tray enamelled (530 x 400 mm) 49,00 ACC 409 Conversion kit for connection to performance optimisation system 155,00 ascobloc Gastro-Gerätebau GmbH 19
INTEGRALINE ascobloc Gastro-Gerätebau GmbH Fax: 0049/351-4533-433 20 Edition: 01.04.2012