Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004)

Similar documents
Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Paper and board - Determination of grammage (ISO 536:2012)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Plastic containers for intravenous injections (ISO 15747:2010)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

Camping tents (ISO 5912:2011)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Energy management systems - Requirements with guidance for use (ISO 50001:2011)

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

PETROLEUM AND NATURAL GAS

Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO :2010)

Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012)

Founding - Magnetic particle testing

Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version )

Water quality - Determination of ph (ISO 10523:2008)

WATER QUALITY - CRITERIA FOR

Personal protective equipment - Safety footwear (ISO 20345:2011)

PLASTICS - DETERMINATION OF THE MELT

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

ILNAS-EN ISO 2692:2006

CLEANROOMS AND ASSOCIATED

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations

PISTON-OPERATED VOLUMETRIC

Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)

Health Informatics - Harmonized data types for information interchange (ISO 21090:2011)

STEELS MICROGRAPHIC DETERMINATION THE APPARENT GRAIN SIZE (ISO 643:2003) IRISH STANDARD I.S. EN ISO 643:2003. Price Code

This document is a preview generated by EVS

Operation of electrical installations -- Part 1: General requirements

Fasteners - Hexagon head screws - Product

Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO :2012)

General requirements for establishing anthropometric databases (ISO 15535:2012)

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV))

ILNAS-EN ISO :2005

Irish Standard Recommendation S.R. CEN/TS 115-4:2015

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

This document is a preview generated by EVS

Office furniture - Office work chair - Part 2: Safety requirements

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

Environmental management systems - Requirements with guidance for use (ISO 14001:2015)

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

This document is a preview generated by EVS

Personal protective equipment - Test methods for footwear (ISO 20344:2011)

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

Aerospace series - Quality systems - First article inspection requirements

Animal and vegetable fats and oils - Sampling (ISO 5555:2001)

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

This document is a preview generated by EVS

ILNAS-EN ISO 10684:2004

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

Irish Standard I.S. EN ISO :2013

Irish Standard I.S. EN ISO 13791:2012

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version )

Solar energy - Solar thermal collectors - Test methods (ISO 9806:2013)

Stationary training equipment - Part 1: General safety requirements and test methods (ISO :2013)

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

CONFORMITY ASSESSMENT - SUPPLIER'S

Irish Standard I.S. EN :2011

Water meters for cold potable water and hot water - Part 4: Non-metrological :2014)

This document is a preview generated by EVS

Gas meters - Additional functionalities

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

Irish Standard I.S. EN ISO :2013

Bitumen and bituminous binders - Specifications for paving grade bitumens

This document is a preview generated by EVS

Foodstuffs - Determination of vitamin C by HPLC

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

ISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method

BIOLOGICAL EVALUATION OF MEDICAL

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test

Dentistry - Powered polymerization activators (ISO 10650:2015)

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing

Temporary structure - Tents - Safety

Irish Standard I.S. EN :2009

Quality management systems - Requirements (ISO 9001:2015)

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine

Dentistry - Powered scaler (ISO 18397:2016)

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

Irish Standard I.S. EN ISO :2009&A1:2014. CEN 2014 No copying without NSAI permission except as permitted by copyright law.

EN ISO ÖNORM. Edition: (ISO 14937:2009)

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

ISO INTERNATIONAL STANDARD

ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015)

Transcription:

Irish Standard I.S. EN ISO 14004:2010 Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004) NSAI 2010 No copying without NSAI permission except as permitted by copyright law.

I.S. xxx: Irish Standard national specification based on the consensus of an expert panel and subject to public consultation. S.R. xxx: Standard Recommendation - recommendation based on the consensus of an expert panel and subject to public consultation. SWiFT xxx: A rapidly developed recommendatory document based on the consensus of the participants of an NSAI workshop. ISO 14004:2005 EN ISO 14004:2010 12 May, 2010 ISO 14004:2005 22 June, 2005 This document was published under the authority of the NSAI and comes into effect on: 4 June, 2010 ICS number: 13.020.10 1 Swift Square, Northwood, Santry Dublin 9 T +353 1 807 3800 F +353 1 807 3838 E standards@nsai.ie W T +353 1 857 6730 F +353 1 857 6729 W standards.ie Údarás um Chaighdeáin Náisiúnta na héireann

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM I.S. EN ISO 14004:2010 EN ISO 14004 May 2010 ICS 13.020.10 English Version Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004) Systèmes de management environnemental - Lignes directrices générales concernant les principes, les systèmes et les techniques de mise en oeuvre (ISO 14004:2004) Umweltmanagementsysteme - Allgemeiner Leitfaden über Grundsätze, Systeme und unterstützende Methoden (ISO 14004:2004) This European Standard was approved by CEN on 23 April 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14004:2010: E

EN ISO 14004:2010 (E) I.S. EN ISO 14004:2010 Contents Page Foreword...3 2

I.S. EN ISO 14004:2010 EN ISO 14004:2010 (E) Foreword The text of ISO 14004:2004 has been prepared by Technical Committee ISO/TC 207 Environmental management of the International Organization for Standardization (ISO) and has been taken over as EN ISO 14004:2010. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2010, and conflicting national standards shall be withdrawn at the latest by November 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 14004:2004 has been approved by CEN as a EN ISO 14004:2010 without any modification. 3

I.S. EN ISO 14004:2010 This page is intentionally left BLANK.

I.S. EN ISO 14004:2010 INTERNATIONAL STANDARD ISO 14004 Second edition 2004-11-15 Environmental management systems General guidelines on principles, systems and support techniques Systèmes de management environnemental Lignes directrices générales concernant les principes, les systèmes et les techniques de mise en œuvre Reference number ISO 14004:2004(E) ISO 2004

ISO 14004:2004(E) I.S. EN ISO 14004:2010 PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyright@iso.org Web www.iso.org Published in Switzerland ii ISO 2004 All rights reserved

I.S. EN ISO 14004:2010 ISO 14004:2004(E) Contents Page 1 Scope... 1 2 Normative references... 1 3 Terms and definitions... 1 4 Environmental management system elements... 5 4.1 General... 5 4.2 Environmental policy... 8 4.3 Planning... 10 4.4 Implementation and operation... 19 4.5 Checking... 28 4.6 Management review... 32 Annex A (informative) Examples of correspondence between environmental management system elements... 34 Bibliography... 39 ISO 2004 All rights reserved iii

ISO 14004:2004(E) I.S. EN ISO 14004:2010 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14004 was prepared by Technical Committee ISO/TC 207, Environmental management, Subcommittee SC 1, Environmental management systems. This second edition cancels and replaces the first edition (ISO 14004:1996), which has been technically revised. iv ISO 2004 All rights reserved

I.S. EN ISO 14004:2010 ISO 14004:2004(E) Introduction As concern grows for continually improving the quality of the environment, organizations of all types and sizes are increasingly turning their attention to the environmental impacts of their activities, products and services. The environmental performance of an organization is of importance to internal and external interested parties. Achieving sound environmental performance requires organizational commitment to a systematic approach and to continual improvement of an environmental management system (EMS). The general purpose of this International Standard is to provide assistance to organizations that wish to implement or improve an environmental management system and thereby improve their environmental performance. This International Standard is consistent with the concept of sustainable development and compatible with diverse cultural, social and organizational frameworks and systems of management. This International Standard can be used by organizations of all types, sizes and levels of maturity, and in all sectors and geographic locations. The special needs of small and medium-sized enterprises (SMEs) are incorporated, and this International Standard accommodates their needs and promotes their use of an environmental management system. This International Standard is part of the series of environmental management standards established by ISO/TC 207. In this series, only ISO 14001 contains requirements that may be objectively audited for certification/registration purposes or for self-declaration purposes. This International Standard includes examples, descriptions and options that aid both in the implementation of an environmental management system and in strengthening its relation to the overall management of an organization. While the guidelines in this International Standard are consistent with the ISO 14001 environmental management system model, they are not intended to provide interpretations of the requirements of ISO 14001. For ease of use, the subclauses of Clause 4 of ISO 14001 have the same numbering as in ISO 14004. However, the latter has extra subclauses (e.g. 4.3.1.1 or 4.3.3.3), where detailed or additional guidance for an effective environmental management system implementation is considered useful. Apart from this International Standard and ISO 14001, there are numerous other environmental management standards in the series of International Standards established by ISO/TC 207. A reference to and description of these International Standards can be found in the ISO publication The ISO 14000 Family of International Standards. This International Standard describes the elements of an environmental management system and provides organizations with guidance on how to establish, implement, maintain or improve an environmental management system. Such a system can substantially enhance an organization's ability to anticipate, identify and manage its interactions with the environment, meet its environmental objectives and ensure ongoing compliance with applicable legal requirements and with other requirements to which the organization subscribes. Examples and approaches are presented throughout this International Standard for illustrative purposes. They are not intended to represent the only possibilities, nor are they necessarily suitable for every organization. In designing and implementing or improving an environmental management system, organizations should select approaches that are appropriate to their own circumstances. Environmental management is an integral part of an organization's overall management system. The design of an environmental management system is an ongoing and interactive process. The structure, responsibilities, practices, procedures, processes and resources for implementing environmental policies, objectives and targets can be coordinated with existing efforts in other areas (e.g. operations, finance, quality, occupational health and safety). For ease of reading and understanding this International Standard, practical help and general guidance have been separated out and are shown as boxed text. ISO 2004 All rights reserved v

ISO 14004:2004(E) I.S. EN ISO 14004:2010 Key tasks for managers establishing, implementing, maintaining or improving an environmental management system include the need to recognize that environmental management is among the highest organizational priorities, establish and maintain communication and constructive relations with internal and external interested parties, identify the environmental aspects of the organization's activities, products and services, identify the legal requirements and other requirements to which the organization subscribes, that relate to the organization's environmental aspects, ensure the commitment of management and all persons working for or on behalf of the organization to the protection of the environment, with clear assignment of accountability and responsibility, encourage environmental planning throughout the product or service life cycle, establish a process for achieving environmental objectives and targets, provide appropriate and sufficient resources, including training, to comply with applicable legal requirements and with other requirements to which the organization subscribes, and to achieve environmental objectives and targets on an ongoing basis, evaluate environmental performance against the organization's environmental policy, objectives and targets and seek improvement where appropriate, establish a management process to audit and review the environmental management system and to identify opportunities for improvement of the system and resulting environmental performance, and encourage contractors and suppliers to establish an environmental management system. Organizations may use this International Standard, or related ISO documents, in various ways, including as guidance to establish, implement, maintain or improve its environmental management system, knowing that this International Standard is not intended for self-declaration or other conformity assessment purposes, and in support of the implementation or improvement of its environmental management system. The choice will depend on factors such as an organization's goals, the maturity of an organization's management systems (i.e. whether the organization has a management system in place that is capable of supporting the inclusion of environmental concerns), possible advantages and disadvantages, as determined by such factors as an organization's current and desired market position, reputation, external relations and the views of interested parties, and the size of an organization. An effective environmental management system helps an organization to avoid, reduce or control the adverse environmental impacts of its activities, products and services, achieve compliance with applicable legal and requirements and with other requirements to which the organization subscribes and assist in continually improving environmental performance. Having an environmental management system can help an organization assure interested parties that a management commitment exists to meet the provisions of its policy, objectives, and targets, emphasis is placed on prevention, evidence of reasonable care and regulatory compliance can be provided, and the system's design incorporates the process of continual improvement. Economic benefits can be gained from implementing an environmental management system. An organization whose management system incorporates an environmental management system has a framework to balance and integrate economic and environmental interests. Economic benefits can also be identified to demonstrate vi ISO 2004 All rights reserved

I.S. EN ISO 14004:2010 ISO 14004:2004(E) to interested parties the value to the organization of sound environmental management. It also provides the organization with the opportunity to link environmental objectives and targets with specific financial outcomes and thus to ensure that resources are made available where they provide the most benefit in both financial and environmental terms. An organization that has implemented an environmental management system can achieve significant competitive advantages. In addition to improved environmental performance, the potential benefits associated with an effective environmental management system include assuring customers of commitment to demonstrable environmental management, maintaining good public/community relations, satisfying investor criteria and improving access to capital, obtaining insurance at reasonable cost, enhancing image and market share, improving cost control, reducing incidents that result in liability, conserving input materials and energy, facilitating the attainment of permits and authorizations and meeting their requirements, promoting environmental awareness among suppliers, contractors and all persons working for or on behalf of the organization, fostering development and sharing of solutions to environmental problems, and improving industry-government relations. ISO 2004 All rights reserved vii

. I.S. EN ISO 14004:2010 viii

INTERNATIONAL STANDARD I.S. EN ISO 14004:2010 ISO 14004:2004(E) Environmental management systems General guidelines on principles, systems and support techniques 1 Scope This International Standard provides guidance on the establishment, implementation, maintenance and improvement of an environmental management system and its coordination with other management systems. NOTE While the system is not intended to manage occupational health and safety issues, they may be included when an organization seeks to implement an integrated environmental and occupational health and safety management system. The guidelines in this International Standard are applicable to any organization, regardless of its size, type, location or level of maturity. While the guidelines in this International Standard are consistent with the ISO 14001 environmental management system model, they are not intended to provide interpretations of the requirements of ISO 14001. 2 Normative references No normative references are cited. This clause is included in order to retain clause numbering identical with the previous edition (ISO 14004:1996). 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 auditor person with the competence to conduct an audit [ISO 9000:2000, 3.9.9] 3.2 continual improvement recurring process of enhancing the environmental management system (3.9) in order to achieve improvements in overall environmental performance (3.11) consistent with the organization's (3.20) environmental policy (3.13) NOTE The process need not take place in all areas of activity simultaneously. [ISO 14001:2004, 3.2] 3.3 correction action taken to eliminate a detected nonconformity (3.18) NOTE Adapted from ISO 9000:2000, 3.6.6. ISO 2004 All rights reserved 1

This is a free preview. Purchase the entire publication at the link below: Looking for additional Standards? Visit SAI Global Infostore Subscribe to our Free Newsletters Do you need to Manage Standards Collections Online? Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation Do you want to know when a Standard has changed? Create safe work processes for the workplace with our Safe Work Method Statements Learn about other SAI Global Services: LOGICOM Military Parts and Supplier Database Metals Infobase Database of Metal Grades, Standards and Manufacturers Materials Infobase Database of Materials, Standards and Suppliers Database of European Law, CELEX and Court Decisions Need to speak with a Customer Service Representative - Contact Us